Related
(First off, apologies for the roughness of this question's writing-- would love any constructive feedback.)
Ok what I'm doing is a bit involved-- I'm trying to make a Python script that executes Bash scripts that each compile a component of a Linux From Scratch (LFS) system. I'm following the LFS 11.2 book pretty closely (but not 100%, although I've been very careful to check where my deviations break things. If you're familiar with LFS, this is a deviation that breaks things).
Basically, my script builds a bunch of tools (bash, tar, xz, make, gcc, binutils) with a cross compiler, and tells their build systems to install them into a directory lfs/temp-tools. Then the script calls os.chroot('lfs') to chroot into the lfs directory, and immediately resets all the environment variables (most importantly PATH) with:
os.environ = {"PATH" : "/usr/bin:/usr/sbin:/temp-tools/bin", ...other trivial stuff like HOME...}
But after the chroot, my calls of
subprocess.run([f"{build_script_path} >{log_file_path} 2>&1"], shell=True)
are failing with FileNotFoundError: [Errno 2] No such file or directory: '/bin/sh', even though
bin/sh in the chroot directory is a sym link to bash
there's a perfectly good copy of bash in /temp-tools/bin
calling print(os.environ) after the python chroot shows /temp-tools/bin is in PATH
I thought maybe subprocess.run is stuck using the old environment variables, before I reset them upon entering the chroot, but adding env=os.environ to subprocess.run does not help. :/ I'm stuck for now
For context if it helps, here is where the subprocess.run call gets made:
def vanilla_build(target_name, src_dir_name=None):
def f():
nonlocal src_dir_name
if src_dir_name == None:
src_dir_name = target_name
tarball_path = find_tarball(src_dir_name)
src_dir_path = tarball_path.split(".tar")[0]
if "tcl" in src_dir_path:
src_dir_path = src_dir_path.rsplit("-",1)[0]
snap1 = lfs_dir_snapshot()
os.chdir(os.environ["LFS"] + "srcs/")
subprocess.run(["tar", "-xf", tarball_path], check=True, env=os.environ)
os.chdir(src_dir_path)
build_script_path = f"{os.environ['LFS']}root/build-scripts/{target_name.replace('_','-')}.sh"
log_file_path = f"{os.environ['LFS']}logs/{target_name}"
####### The main call #######
proc = subprocess.run([f"{build_script_path} >{log_file_path} 2>&1"],
shell=True, env=os.environ)
subprocess.run(["rm", "-rf", src_dir_path], check=True)
if proc.returncode != 0:
red_print(build_script_path + " failed!")
return
tracked_file_record_path = f"{os.environ['LFS']}logs/tracked/{target_name}"
with open(tracked_file_record_path, 'w') as f:
new_files = lfs_dir_snapshot() - snap1
f.writelines('\n'.join(new_files))
f.__name__ = "build_" + target_name
return f
And how I enter the chroot:
def enter_chroot():
os.chdir(os.environ["LFS"])
os.chroot(os.environ["LFS"])
os.environ = {"HOME" : "/root",
"TERM" : os.environ["TERM"],
"PATH" : "/usr/bin:/usr/sbin:/temp-tools/bin",
"LFS" : '/'}
Thank you! In the meantime I'm going to chop away as much code as possible to isolate the problem to either understand whatever I'm not getting or rewrite this question to be less context specific
I am coding a voice assistant to automate my pc which is running Windows 11 and I want to open apps using voice commands, I don't want to hard code every installed app's .exe path. Is there any way to get a dictionary of the app's name and their .exe path. I am able to get currently running apps and close them using this:
def close_app(app_name):
running_apps=psutil.process_iter(['pid','name'])
found=False
for app in running_apps:
sys_app=app.info.get('name').split('.')[0].lower()
if sys_app in app_name.split() or app_name in sys_app:
pid=app.info.get('pid')
try:
app_pid = psutil.Process(pid)
app_pid.terminate()
found=True
except: pass
else: pass
if not found:
print(app_name + " is not running")
else:
print('Closed ' + app_name)
Possibly using both wmic and use either which or gmc to grab the path and build the dict?
Following is a very basic code, not tested completely.
import subprocess
import shutil
Data = subprocess.check_output(['wmic', 'product', 'get', 'name'])
a = str(Data)
appsDict = {}
x = (a.replace("b\\'Name","").split("\\r\\r\\n"))
for i in range(len(x) - 1):
appName = x[i+1].rstrip()
appPath = shutil.which(appName)
appsDict.update({appName: appPath})
print(appsDict)
Under Windows PowerShell there is a Get-Command utility. Finding Windows executables using Get-Command is described nicely in this issue. Essentially it's just running
Get-Command *
Now you need to use this from python to get the results of command as a variable. This can be done by
import subprocess
data = subprocess.check_output(['Get-Command', '*'])
Probably this is not the best, and not a complete answer, but maybe it's a useful idea.
This can be accomplished via the following code:
import os
def searchfiles(extension, folder):
with open(extension[1:] + "file.txt", "w", encoding="utf-8") as filewrite:
for r, d, f in os.walk(folder):
for file in f:
if file.endswith(extension):
filewrite.write(f"{r + file}\n")
searchfiles('.exe', 'H:\\')
Inspired from: https://pythonprogramming.altervista.org/find-all-the-files-on-your-computer/
I want to create a start menu or Desktop shortcut for my Python windows installer package. I am trying to follow https://docs.python.org/3.4/distutils/builtdist.html#the-postinstallation-script
Here is my script;
import sys
from os.path import dirname, join, expanduser
pyw_executable = sys.executable.replace('python.exe','pythonw.exe')
script_file = join(dirname(pyw_executable), 'Scripts', 'tklsystem-script.py')
w_dir = expanduser(join('~','lsf_files'))
print(sys.argv)
if sys.argv[1] == '-install':
print('Creating Shortcut')
create_shortcut(
target=pyw_executable,
description='A program to work with L-System Equations',
filename='L-System Tool',
arguments=script_file,
workdir=wdir
)
I also specified this script in scripts setup option, as indicated by aforementioned docs.
Here is the command I use to create my installer;
python setup.py bdist_wininst --install-script tklsystem-post-install.py
After I install my package using created windows installer, I can't find where my shorcut is created, nor I can confirm whether my script run or not?
How can I make setuptools generated windows installer to create desktop or start menu shortcuts?
Like others have commented here and elsewhere the support functions don't seem to work at all (at least not with setuptools). After a good day's worth of searching through various resources I found a way to create at least the Desktop shortcut. I'm sharing my solution (basically an amalgam of code I found here and here). I should add that my case is slightly different from yasar's, because it creates a shortcut to an installed package (i.e. an .exe file in Python's Scripts directory) instead of a script.
In short, I added a post_install function to my setup.py, and then used the Python extensions for Windows to create the shortcut. The location of the Desktop folder is read from the Windows registry (there are other methods for this, but they can be unreliable if the Desktop is at a non-standard location).
#!/usr/bin/env python
import os
import sys
import sysconfig
if sys.platform == 'win32':
from win32com.client import Dispatch
import winreg
def get_reg(name,path):
# Read variable from Windows Registry
# From https://stackoverflow.com/a/35286642
try:
registry_key = winreg.OpenKey(winreg.HKEY_CURRENT_USER, path, 0,
winreg.KEY_READ)
value, regtype = winreg.QueryValueEx(registry_key, name)
winreg.CloseKey(registry_key)
return value
except WindowsError:
return None
def post_install():
# Creates a Desktop shortcut to the installed software
# Package name
packageName = 'mypackage'
# Scripts directory (location of launcher script)
scriptsDir = sysconfig.get_path('scripts')
# Target of shortcut
target = os.path.join(scriptsDir, packageName + '.exe')
# Name of link file
linkName = packageName + '.lnk'
# Read location of Windows desktop folder from registry
regName = 'Desktop'
regPath = r'Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders'
desktopFolder = os.path.normpath(get_reg(regName,regPath))
# Path to location of link file
pathLink = os.path.join(desktopFolder, linkName)
shell = Dispatch('WScript.Shell')
shortcut = shell.CreateShortCut(pathLink)
shortcut.Targetpath = target
shortcut.WorkingDirectory = scriptsDir
shortcut.IconLocation = target
shortcut.save()
setup(name='mypackage',
...,
...)
if sys.argv[1] == 'install' and sys.platform == 'win32':
post_install()
Here's a link to a full setup script in which I used this:
https://github.com/KBNLresearch/iromlab/blob/master/setup.py
If you want to confirm whether the script is running or not, you can print to a file instead of the console. Looks like text you print to console in the post-install script won't show up.
Try this:
import sys
from os.path import expanduser, join
pyw_executable = join(sys.prefix, "pythonw.exe")
shortcut_filename = "L-System Toolsss.lnk"
working_dir = expanduser(join('~','lsf_files'))
script_path = join(sys.prefix, "Scripts", "tklsystem-script.py")
if sys.argv[1] == '-install':
# Log output to a file (for test)
f = open(r"C:\test.txt",'w')
print('Creating Shortcut', file=f)
# Get paths to the desktop and start menu
desktop_path = get_special_folder_path("CSIDL_COMMON_DESKTOPDIRECTORY")
startmenu_path = get_special_folder_path("CSIDL_COMMON_STARTMENU")
# Create shortcuts.
for path in [desktop_path, startmenu_path]:
create_shortcut(pyw_executable,
"A program to work with L-System Equations",
join(path, shortcut_filename),
script_path,
working_dir)
At least with Python 3.6.5, 32bit on Windows, setuptools does work for this. But based on the accepted answer, by trial and error I found some issues that may have caused your script to fail to do what you wanted.
create_shortcut does not accept keyword arguments, only positional, so its usage in your code is invalid
You must add a .lnk extension for Windows to recognise the shortcut
I found sys.executable will be the name of the installer executable, not the python executable
As mentioned, you can't see stdout or stderr so you might want to log to a text file. I would suggest also redirecting sys.stdout and sys.stderr to the log file.
(Maybe not relevant) as mentioned in this question there appears to be a bug with the version string generated by bdist_wininst. I used the hexediting hack from an answer there to work around this. The location in the answer is not the same, you have to find the -32 yourself.
Full example script:
import sys
import os
import datetime
global datadir
datadir = os.path.join(get_special_folder_path("CSIDL_APPDATA"), "mymodule")
def main(argv):
if "-install" in argv:
desktop = get_special_folder_path("CSIDL_DESKTOPDIRECTORY")
print("Desktop path: %s" % repr(desktop))
if not os.path.exists(datadir):
os.makedirs(datadir)
dir_created(datadir)
print("Created data directory: %s" % repr(datadir))
else:
print("Data directory already existed at %s" % repr(datadir))
shortcut = os.path.join(desktop, "MyModule.lnk")
if os.path.exists(shortcut):
print("Remove existing shortcut at %s" % repr(shortcut))
os.unlink(shortcut)
print("Creating shortcut at %s...\n" % shortcut)
create_shortcut(
r'C:\Python36\python.exe',
"MyModuleScript",
shortcut,
"",
datadir)
file_created(shortcut)
print("Successfull!")
elif "-remove" in sys.argv:
print("Removing...")
pass
if __name__ == "__main__":
logfile = r'C:\mymodule_install.log' # Fallback location
if os.path.exists(datadir):
logfile = os.path.join(datadir, "install.log")
elif os.environ.get("TEMP") and os.path.exists(os.environ.get("TEMP"),""):
logfile = os.path.join(os.environ.get("TEMP"), "mymodule_install.log")
with open(logfile, 'a+') as f:
f.write("Opened\r\n")
f.write("Ran %s %s at %s" % (sys.executable, " ".join(sys.argv), datetime.datetime.now().isoformat()))
sys.stdout = f
sys.stderr = f
try:
main(sys.argv)
except Exception as e:
raise
f.close()
sys.exit(0)
UPD: on an off chance that the client machine has pywin32 installed, we try in-process creation first. Somewhat cleaner that way.
Here is another take. This assumes the package is called myapp, and that also becomes the executable that you want a shortcut to. Substitute your own package name and your own shortcut text.
Uses a Windows Scripting Host COM class - in process if possible, inside a Powershell command line as a subprocess if not. Tested on Python 3.6+.
from setuptools import setup
from setuptools.command.install import install
import platform, sys, os, site
from os import path, environ
def create_shortcut_under(root, exepath):
# Root is an env variable name -
# either ALLUSERSPROFILE for the all users' Start menu,
# or APPDATA for the current user specific one
profile = environ[root]
linkpath = path.join(profile, "Microsoft", "Windows", "Start Menu", "Programs", "My Python app.lnk")
try:
from win32com.client import Dispatch
from pywintypes import com_error
try:
sh = Dispatch('WScript.Shell')
link = sh.CreateShortcut(linkpath)
link.TargetPath = exepath
link.Save()
return True
except com_error:
return False
except ImportError:
import subprocess
s = "$s=(New-Object -COM WScript.Shell).CreateShortcut('" + linkpath + "');$s.TargetPath='" + exepath + "';$s.Save()"
return subprocess.call(['powershell', s], stdout = subprocess.DEVNULL, stderr = subprocess.DEVNULL) == 0
def create_shortcut(inst):
try:
exepath = path.join(path.dirname(sys.executable), "Scripts", "myapp.exe")
if not path.exists(exepath):
# Support for "pip install --user"
exepath = path.join(path.dirname(site.getusersitepackages()), "Scripts", "myapp.exe")
# If can't modify the global menu, fall back to the
# current user's one
if not create_shortcut_under('ALLUSERSPROFILE', exepath):
create_shortcut_under('APPDATA', exepath)
except:
pass
class my_install(install):
def run(self):
install.run(self)
if platform.system() == 'Windows':
create_shortcut(self)
#...
setup(
#...
cmdclass={'install': my_install},
entry_points={"gui_scripts": ["myapp = myapp.__main__:main"]},
How do you use Python to determine which Linux device/partition contains a given filesystem?
e.g.
>>> get_filesystem_device('/')
/dev/sda
>>> get_filesystem_partition('/')
/dev/sda1
Your question was about Linux, so this is (more or less) linux specific.
Below is code example for three variants for mapping major/minor to a device name.
Parse /proc/partitions.
Ask hal. Hal also keeps track of "parent" device, meaning you can easily get the disk aswell as the partition.
Check sysfs yourself. This is where hal gets its information from.
I'd say that /proc/partitions is simplest - it is just one file to open and check. hal gives you most information, and abstracts away lots of details. sysfs may be viewed as more correct that /proc/partitions and doesn't require hal to be running.
For a desktop program I would go for hal. On an embedded system I'd go with sysfs.
import os
def main():
dev = os.stat("/home/").st_dev
major, minor = os.major(dev), os.minor(dev)
print "/proc/partitions says:", ask_proc_partitions(major, minor)
print "HAL says:", ask_hal(major, minor)
print "/sys says:", ask_sysfs(major, minor)
def _parse_proc_partitions():
res = {}
for line in file("/proc/partitions"):
fields = line.split()
try:
tmaj = int(fields[0])
tmin = int(fields[1])
name = fields[3]
res[(tmaj, tmin)] = name
except:
# just ignore parse errors in header/separator lines
pass
return res
def ask_proc_partitions(major, minor):
d = _parse_proc_partitions()
return d[(major, minor)]
def ask_hal(major, minor):
import dbus
bus = dbus.SystemBus()
halobj = bus.get_object('org.freedesktop.Hal', '/org/freedesktop/Hal/Manager')
hal = dbus.Interface(halobj, 'org.freedesktop.Hal.Manager')
def getdevprops(p):
bdevi = dbus.Interface(bus.get_object('org.freedesktop.Hal', p),
"org.freedesktop.Hal.Device")
return bdevi.GetAllProperties()
bdevs = hal.FindDeviceByCapability("block")
for bdev in bdevs:
props = getdevprops(bdev)
if (props['block.major'], props['block.minor']) == (major, minor):
parentprops = getdevprops(props['info.parent'])
return (str(props['block.device']),
str(parentprops['block.device']))
def ask_sysfs(major, minor):
from glob import glob
needle = "%d:%d" % (major, minor)
files = glob("/sys/class/block/*/dev")
for f in files:
if file(f).read().strip() == needle:
return os.path.dirname(f)
return None
if __name__ == '__main__':
main()
It looks like this post has some of your answer (still not sure just how to grab the major/minor out of the /dev/sda2 entry to match it up with what os.stat() returns for /:
Device number in stat command output
>>> import os
>>> print hex(os.stat('/')[2])
0x802
\ \minor device number
\major device number
[me#server /]$ ls -l /dev/sda2
brw-rw---- 1 root disk 8, 2 Jun 24 2004 /dev/sda2
[me#server jgaines2]$ \ \minor device number
\major device number
I recently had a need for this solution also. After seeing all the convoluted methods of getting the result I wanted through pure python, I decided to turn to the shell for help.
import subprocess
device = subprocess.check_output("grep '/filesystem' /proc/mounts | awk '{printf $1}'", shell=True)
print device
This gives me exactly what I want, the device string for where my filesystem is mounted.
Short, sweet, and runs in python. :)
There are problems with quite a few of the above solutions. There's actually a problem with the question as well.
The last answer (searching /proc/mounts) just doesn't work: searching for "/" will match every line in /proc/mounts. Even correcting this like this won't work:
import subprocess
device = subprocess.check_output("awk '$2 == \"/filesystem\" { print $1}' /proc/mounts", shell=True)
print device
When "/filesystem" is "/" you'll typically get two entries, one for "rootfs" and one for the actual device. It also won't work when the mounted file system name has spaces in it (the space appears as \040 in /proc/mounts).
The problem is made worse with btrfs subvolumes. Each subvolume is mounted separately but they all share the same device. If you're trying to use a btrfs snapshot for backups (as I was) then you need the subvolume name and an indication of the filesystem type.
This function returns a tuple of (device, mountpoint, filesystem) and seems to work:
import os
def get_filesystem_partition(fs):
res = None
dev = os.lstat(fs).st_dev
for line in file('/proc/mounts'):
# lines are device, mountpoint, filesystem, <rest>
# later entries override earlier ones
line = [s.decode('string_escape') for s in line.split()[:3]]
if dev == os.lstat(line[1]).st_dev:
res = tuple(line)
return res
That seems to work for all the cases I can think of, although I expect that there are still pathological cases where it falls to bits.
It is not the purdiest, but this will get you started:
#!/usr/bin/python
import os, stat, subprocess, shlex, re, sys
dev=os.stat('/')[stat.ST_DEV]
major=os.major(dev)
minor=os.minor(dev)
out = subprocess.Popen(shlex.split("df /"), stdout=subprocess.PIPE).communicate()
m=re.search(r'(/[^\s]+)\s',str(out))
if m:
mp= m.group(1)
else:
print "cannot parse df"
sys.exit(2)
print "'/' mounted at '%s' with dev number %i, %i" % (mp,major,minor)
On OS X:
'/' mounted at '/dev/disk0s2' with dev number 14, 2
On Ubuntu:
'/' mounted at '/dev/sda1' with dev number 8, 1
To get the device name, chop off the minor number from the partition name. On OS X, also chop the 's' + minor number.
How about using the (linux) blkid command (/sbin/blkid)
$ uname --kernel-name --kernel-release
Linux 3.2.0-4-amd64
$ python --version
Python 2.7.3
-
#!/usr/bin/env python
import subprocess
sys_command = "/sbin/blkid"
proc = subprocess.Popen(sys_command,
stdout=subprocess.PIPE,
shell=True)
# proc.communicate() returns a tuple (stdout,stderr)
blkid_output = proc.communicate()[0]
print blkid_output
Here's the output on a dual-boot laptop with an (unmounted) USB drive (sdb1)
$ ./blkid.py
/dev/sda1: LABEL="RECOVERY" UUID="xxxx-xxxx" TYPE="vfat"
/dev/sda2: LABEL="OS" UUID="xxxxxxxxxxxxxxx" TYPE="ntfs"
/dev/sda5: UUID="xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" TYPE="ext4"
/dev/sda6: UUID="xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" TYPE="swap"
/dev/sda7: UUID="xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" TYPE="ext4"
/dev/sdb1: LABEL="CrunchBang" TYPE="iso9660"
Here is how you can simply get the devices major and minor numbers:
import os
major, minor = divmod(os.stat('/').st_dev, 256)
How can I change my desktop background with python?
I want to do it in both Windows and Linux.
On Windows with python2.5 or higher, use ctypes to load user32.dll and call SystemParametersInfo() with SPI_SETDESKWALLPAPER action.
For example:
import ctypes
SPI_SETDESKWALLPAPER = 20
ctypes.windll.user32.SystemParametersInfoA(SPI_SETDESKWALLPAPER, 0, "image.jpg" , 0)
For Python3.5, SystemParametersInfoA doesn't work. Use SystemParametersInfoW.
import ctypes
ctypes.windll.user32.SystemParametersInfoW(20, 0, "absolute path" , 0)
I use the following method in one of my initial projects:
def set_wallpaper(self,file_loc, first_run):
# Note: There are two common Linux desktop environments where
# I have not been able to set the desktop background from
# command line: KDE, Enlightenment
desktop_env = self.get_desktop_environment()
try:
if desktop_env in ["gnome", "unity", "cinnamon"]:
uri = "'file://%s'" % file_loc
try:
SCHEMA = "org.gnome.desktop.background"
KEY = "picture-uri"
gsettings = Gio.Settings.new(SCHEMA)
gsettings.set_string(KEY, uri)
except:
args = ["gsettings", "set", "org.gnome.desktop.background", "picture-uri", uri]
subprocess.Popen(args)
elif desktop_env=="mate":
try: # MATE >= 1.6
# info from http://wiki.mate-desktop.org/docs:gsettings
args = ["gsettings", "set", "org.mate.background", "picture-filename", "'%s'" % file_loc]
subprocess.Popen(args)
except: # MATE < 1.6
# From https://bugs.launchpad.net/variety/+bug/1033918
args = ["mateconftool-2","-t","string","--set","/desktop/mate/background/picture_filename",'"%s"' %file_loc]
subprocess.Popen(args)
elif desktop_env=="gnome2": # Not tested
# From https://bugs.launchpad.net/variety/+bug/1033918
args = ["gconftool-2","-t","string","--set","/desktop/gnome/background/picture_filename", '"%s"' %file_loc]
subprocess.Popen(args)
## KDE4 is difficult
## see http://blog.zx2c4.com/699 for a solution that might work
elif desktop_env in ["kde3", "trinity"]:
# From http://ubuntuforums.org/archive/index.php/t-803417.html
args = 'dcop kdesktop KBackgroundIface setWallpaper 0 "%s" 6' % file_loc
subprocess.Popen(args,shell=True)
elif desktop_env=="xfce4":
#From http://www.commandlinefu.com/commands/view/2055/change-wallpaper-for-xfce4-4.6.0
if first_run:
args0 = ["xfconf-query", "-c", "xfce4-desktop", "-p", "/backdrop/screen0/monitor0/image-path", "-s", file_loc]
args1 = ["xfconf-query", "-c", "xfce4-desktop", "-p", "/backdrop/screen0/monitor0/image-style", "-s", "3"]
args2 = ["xfconf-query", "-c", "xfce4-desktop", "-p", "/backdrop/screen0/monitor0/image-show", "-s", "true"]
subprocess.Popen(args0)
subprocess.Popen(args1)
subprocess.Popen(args2)
args = ["xfdesktop","--reload"]
subprocess.Popen(args)
elif desktop_env=="razor-qt": #TODO: implement reload of desktop when possible
if first_run:
desktop_conf = configparser.ConfigParser()
# Development version
desktop_conf_file = os.path.join(self.get_config_dir("razor"),"desktop.conf")
if os.path.isfile(desktop_conf_file):
config_option = r"screens\1\desktops\1\wallpaper"
else:
desktop_conf_file = os.path.join(self.get_home_dir(),".razor/desktop.conf")
config_option = r"desktops\1\wallpaper"
desktop_conf.read(os.path.join(desktop_conf_file))
try:
if desktop_conf.has_option("razor",config_option): #only replacing a value
desktop_conf.set("razor",config_option,file_loc)
with codecs.open(desktop_conf_file, "w", encoding="utf-8", errors="replace") as f:
desktop_conf.write(f)
except:
pass
else:
#TODO: reload desktop when possible
pass
elif desktop_env in ["fluxbox","jwm","openbox","afterstep"]:
#http://fluxbox-wiki.org/index.php/Howto_set_the_background
# used fbsetbg on jwm too since I am too lazy to edit the XML configuration
# now where fbsetbg does the job excellent anyway.
# and I have not figured out how else it can be set on Openbox and AfterSTep
# but fbsetbg works excellent here too.
try:
args = ["fbsetbg", file_loc]
subprocess.Popen(args)
except:
sys.stderr.write("ERROR: Failed to set wallpaper with fbsetbg!\n")
sys.stderr.write("Please make sre that You have fbsetbg installed.\n")
elif desktop_env=="icewm":
# command found at http://urukrama.wordpress.com/2007/12/05/desktop-backgrounds-in-window-managers/
args = ["icewmbg", file_loc]
subprocess.Popen(args)
elif desktop_env=="blackbox":
# command found at http://blackboxwm.sourceforge.net/BlackboxDocumentation/BlackboxBackground
args = ["bsetbg", "-full", file_loc]
subprocess.Popen(args)
elif desktop_env=="lxde":
args = "pcmanfm --set-wallpaper %s --wallpaper-mode=scaled" % file_loc
subprocess.Popen(args,shell=True)
elif desktop_env=="windowmaker":
# From http://www.commandlinefu.com/commands/view/3857/set-wallpaper-on-windowmaker-in-one-line
args = "wmsetbg -s -u %s" % file_loc
subprocess.Popen(args,shell=True)
## NOT TESTED BELOW - don't want to mess things up ##
#elif desktop_env=="enlightenment": # I have not been able to make it work on e17. On e16 it would have been something in this direction
# args = "enlightenment_remote -desktop-bg-add 0 0 0 0 %s" % file_loc
# subprocess.Popen(args,shell=True)
#elif desktop_env=="windows": #Not tested since I do not run this on Windows
# #From https://stackoverflow.com/questions/1977694/change-desktop-background
# import ctypes
# SPI_SETDESKWALLPAPER = 20
# ctypes.windll.user32.SystemParametersInfoA(SPI_SETDESKWALLPAPER, 0, file_loc , 0)
#elif desktop_env=="mac": #Not tested since I do not have a mac
# #From https://stackoverflow.com/questions/431205/how-can-i-programatically-change-the-background-in-mac-os-x
# try:
# from appscript import app, mactypes
# app('Finder').desktop_picture.set(mactypes.File(file_loc))
# except ImportError:
# #import subprocess
# SCRIPT = """/usr/bin/osascript<<END
# tell application "Finder" to
# set desktop picture to POSIX file "%s"
# end tell
# END"""
# subprocess.Popen(SCRIPT%file_loc, shell=True)
else:
if first_run: #don't spam the user with the same message over and over again
sys.stderr.write("Warning: Failed to set wallpaper. Your desktop environment is not supported.")
sys.stderr.write("You can try manually to set Your wallpaper to %s" % file_loc)
return False
return True
except:
sys.stderr.write("ERROR: Failed to set wallpaper. There might be a bug.\n")
return False
def get_config_dir(self, app_name=APP_NAME):
if "XDG_CONFIG_HOME" in os.environ:
confighome = os.environ['XDG_CONFIG_HOME']
elif "APPDATA" in os.environ: # On Windows
confighome = os.environ['APPDATA']
else:
try:
from xdg import BaseDirectory
confighome = BaseDirectory.xdg_config_home
except ImportError: # Most likely a Linux/Unix system anyway
confighome = os.path.join(self.get_home_dir(),".config")
configdir = os.path.join(confighome,app_name)
return configdir
def get_home_dir(self):
if sys.platform == "cygwin":
home_dir = os.getenv('HOME')
else:
home_dir = os.getenv('USERPROFILE') or os.getenv('HOME')
if home_dir is not None:
return os.path.normpath(home_dir)
else:
raise KeyError("Neither USERPROFILE or HOME environment variables set.")
The get_desktop_environment method has been posted in another thread.
On a gnome desktop, you usually do this with gconf, either directly calling gconftool or using the gconf python module. The latter is in the link given by unutbu. The first method could be done like this.
import commands
command = "gconftool-2 --set /desktop/gnome/background/picture_filename --type string '/path/to/file.jpg'"
status, output = commands.getstatusoutput(command) # status=0 if success
In gnome, it is probably preferable to use the python binding of gconf directly:
import gconf
conf = gconf.client_get_default()
conf.set_string('/desktop/gnome/background/picture_filename','/path/to/filename.jpg')
On windows, you will need some trickery with pywin32, and the windows API, on 'linux' the answer will depend on which desktop is running - KDE, Gnome, or something more exotic. Under KDE (and maybe Gnome) you can probably send a message using D-Bus, which you could do without including any new libraries by using the command line tool dbus-send.
The other option would be to set the desktop wallpaper to a file which you then edit / replace from python - but this will probably only result in a change when the user logs in.
Firstly, import ctypes: it gives you access to windows components such as the screensaver, wallpapers, etc.
Then call
ctypes.windll.user32.SystemParametersInfoA(20, 0, the_complete_path_of_your_image, 0)
Make sure the path is the complete path of your image, not just the path from the active directory
There is a difference what SystemParametersInfo method to be called based on what if you are running on 64 bit or 32 bit OS. For 64 bit you have to use SystemParametersInfoW (Unicode) and for 32 bit SystemParametersInfoA (ANSI)
import struct
import ctypes
SPI_SETDESKWALLPAPER = 20
WALLPAPER_PATH = 'C:\\your_file_name.jpg'
def is_64_windows():
"""Find out how many bits is OS. """
return struct.calcsize('P') * 8 == 64
def get_sys_parameters_info():
"""Based on if this is 32bit or 64bit returns correct version of SystemParametersInfo function. """
return ctypes.windll.user32.SystemParametersInfoW if is_64_windows() \
else ctypes.windll.user32.SystemParametersInfoA
def change_wallpaper():
sys_parameters_info = get_sys_parameters_info()
r = sys_parameters_info(SPI_SETDESKWALLPAPER, 0, WALLPAPER_PATH, 3)
# When the SPI_SETDESKWALLPAPER flag is used,
# SystemParametersInfo returns TRUE
# unless there is an error (like when the specified file doesn't exist).
if not r:
print(ctypes.WinError())
change_wallpaper()
import ctypes,win32con
def getWallpaper():
ubuf = ctypes.create_unicode_buffer(512)
ctypes.windll.user32.SystemParametersInfoW(win32con.SPI_GETDESKWALLPAPER,len(ubuf),ubuf,0)
return ubuf.value
def setWallpaper(path):
changed = win32con.SPIF_UPDATEINIFILE | win32con.SPIF_SENDCHANGE
ctypes.windll.user32.SystemParametersInfoW(win32con.SPI_SETDESKWALLPAPER,0,path,changed)
Alternatively: (with SystemParametersInfoA)
def getWallpaper():
sbuf = ctypes.create_string_buffer(512) # ctypes.c_buffer(512)
ctypes.windll.user32.SystemParametersInfoA(win32con.SPI_GETDESKWALLPAPER,len(sbuf),sbuf,0)
return sbuf.value
def setWallpaper(path):
changed = win32con.SPIF_UPDATEINIFILE | win32con.SPIF_SENDCHANGE
ctypes.windll.user32.SystemParametersInfoA(win32con.SPI_SETDESKWALLPAPER,0,path.encode(),changed) # "".encode() = b""
Arguments are:
SystemParametersInfo(SetOrGet, GetBufferSize, SetBufferOrGetBuffer, SetChange)
The path has to be absolute, so if you're using something relative to your script, do:
path = os.path.abspath(path)
To see more stuff you can do with SystemParametersInfo, see the docs.
(near the bottom there's an example to change the mouse speed)
P.S. There are many answers already here, but they're leaving out the broadcasting you're supposed to do. Sure it works without it, but it's bad practice not to use it properly.
P.P.S And they only gave hard coded values, rather than the variables they come from.
Also note, i use 512 characters for the buffer size when getting the path, just to be more safe since paths might exceed 256. I doubt anyone will have paths as long as that though.
One more note. I've only tested the above examples in Python 3, but i don't think SystemParametersInfoA needs the .encode() in Python 2. (they updated strings in Python 3 to unicode i believe) The string in SystemParametersInfoW may need converting for Python 2.
I read all the answers and after searching for a while i found a easier solution.
Install the module named py-wallpaper.
pip install py-wallpaper
Import the module.
from wallpaper import set_wallpaper, get_wallpaper
set the wallpaper using set walpaper
set_wallpaper("location/to/image.jpg")
get the current wallpaper's path using get wallpaper
print(get_wallpaper())
thanks.
changing the background image of desktop
import ctypes
import os
SPI_SETDESKWALLPAPER = 20
ctypes.windll.user32.SystemParametersInfoA(SPI_SETDESKWALLPAPER, 0, 'your image path', 3)
#'C:\\Users\\Public\\Pictures\\abc.jpg'
it worked fine for me. windows10, python27
On Windows with python2.5 or higher, use ctypes to load user32.dll and call
import ctypes
ctypes.windll.user32.SystemParametersInfoW(20,0,"Path_wallpaper", 0)
speak("Background changed succesfully")
Just adding a small precision to ShivaGuntuku 's post :
In python 3 you should replace the 'A' by a 'W' in SytemParametersInfoA. Small exemple to change your desktop background in windows10 with python 3 :
import ctypes
import os
SPI_SETDESKWALLPAPER = 20
ctypes.windll.user32.SystemParametersInfoW(
SPI_SETDESKWALLPAPER, 0, 'C:\\Users\\godet\\OneDrive\\Images\\breaker_wall.jpg', 0)
this works for me
import ctypes
ctypes.windll.user32.SystemParametersInfoW(20,0,path:os.PathLike,3)
You can use this library PyWallpaper, worked for me on mac also.
To install type pip install PyWallpaper.
And then to change/set your wallpaper -
from PyWallpaper import change_wallpaper
change_wallpaper("/some_path/sample.jpg")