I'm having this problem when i try to import numpy or any other modules of python on PyCharm or Visual Studio Code.
here's some things that i tried:
When i try to import direct via Python CLI the import works perfectly without any changes but when i use Visual Studio Code or Pycharm this problem happens even using their CLI, i tried the flatpak and distribution version of Pycharm and the problem continues.
I tried to change python interpreter of VSC using "commmand palette Python: Select interpreter" and the problem still happening
I installed Fedora workstation 37 on a VM only installing Pip, Numpy, VSC Flatpak via FlatHub and IntelliCode extension and the problem continues
Can someone help me?
EDIT: I find the problem, the reason why i was having this problem is because the VSC Flatpak isn't well integrated with the system therefore not able to acess SDKs of my host system.
To anyone having similar problem you can see how to solve here.
I have been using VSCode with the Microsoft Python extension for a couple of months now. However just today I found that the green button I had in the top right that executed my code is gone. I have tried uninstalling the python extension and reinstalling, I have deleted and redownloaded VSCode, I have tried installing code runner. None of these have fixed the issue.
This is the image of my VSCode, which may help to solve the issue:
When I tried to select the Python: select interpreter I got an error in the bottom right that says,
"Command 'Python: Select Interpreter' resulted in an error (command 'python.setInterpreter' not found)"
I have never experienced an issue like this before so any help is greatly appreciated. Thank you!
Image of the plugin I have installed.
Try the following. If that does not help create a new bug.
Do the following to remove stale versions of the extension:
1.Uninstall Python extension (if you have pylance uninstall it first) in visual studio code.
2.Close all instances of VS Code or close visual studio code.
3.Go to, %USERPROFILE%/.vscode/extensions (on windows) or ~/.vscode/extensions on Windows/Linux/Mac.
4.Go to Run and give %USERPROFILE%/.vscode/extensions (on windows). It will open extensions folder.
5.Delete any folder with the name starting with ms-python.python*
6.Start VS Code, and install Python extension again(also pylance if you uninstalled it in step 1).
So I had faced the problem and couldn't find solution until I stared at VS code and found at the bottom left corner that it was in restricted mode, you have to run it in trust mode and it will fix the problem.
If the option is not coming, there is an option to run the program on the left panel in vs code which looks something like this:
Then you need to click debug and run or whatever the option is, if that is blurred out then you've not saved the file, first save it and then again do the same options, and then it will run.
I figured it out!!! The most recent update for the Microsoft Python plugin on VSCode seems to be bugged or something, I'm not sure. However I installed an older version and everything works now, including bringing back the green run button. Thank you all so much for the help!
Yep it's an issue with the most recent releases of vscode. The quick fix right now is just to roll back to an older version. You can easily do this by pressing CTRL+SHIFT+X in vscode to get to the extensions menu, and then clicking the Python extension, and then clicking the little arrow to the right of "uninstall". Here, you can just click "Install Another Version".
For me v2020.10.332292344 did the trick.
https://github.com/microsoft/vscode-python/issues/14959
Many others are facing the issue right now too.
https://github.com/microsoft/vscode-python/issues/14977
I am using WSL2, and i encountered this error today. My VScode used to work fine until my version was automatically upgraded to 1.60. When i checked my extensions, it said that my Python extension is not installed in WSL2, so i clicked on install and the problem was solved.
It may also come from the restricted mode. Please make sure you're in a trusted window.
"Command 'Python: Select Interpreter' resulted in an error (command 'python.setInterpreter' not found)"
The error happened on the newer version 3.10.6 I installed on my new system.
I uninstalled the new python version. Then went to Microsoft store and installed the older version 3.9 directly from the store. When I tried adding the interpreter again on vscode, it was successful.
reloading or upgrading python extension worked for me.
Kindly install the Python interpreter from the following site:
https://www.python.org/downloads/
Then vs code will ask for permission to run the interpreter.
and then its done
Description
When I tried to install package sacrebleu, I got an error like this:
Installation Error
It said "System cannot find the specified file". However I have no idea how to solve it.
I have tried installing package mecab-python3. But it confuses me that it was successfully installed in Anaconda but got an error, "Microsoft Visual C++ 14.0 is required", in original python38 environment.
Whether the package mecab-python3 has been installed or not, I still got the same error and cannot install sacrebleu.
I also tried restarting my machine but it does not work.
Is there anyone could solve it? or I want to know if there is any alternative package I can use to calculate BLEU score.
Thanks Anyway!
My Environment
Windows 10
Python 3.8
pip 20.1.1
Anaconda3 v4.8.2
I'm the mecab-python3 maintainer. Sorry it's giving you trouble.
The README has a link to the C++ runtime pack you have to install on Windows, if you install that it should work.
I have heard reports of the package not working with Anaconda on Windows specifically, though it seems to work sometimes. If you have trouble please open an issue and I'll try to fix it. On the other hand, if you aren't processing Japanese there's no reason to import the module and that may be a bug in sacrebleu.
Ah, actually, I just saw your screenshot - didn't notice it before.
Versions before 1.0 don't support Windows. But to keep using the old dictionary, sacrebleu has to make some changes, so they don't support 1.0+ yet. I think they are working on it, see this issue.
I would like to install previous version of Python extension for VSCode (ms-python.python) to troubleshoot something, but when I am trying to use context menu with "Install another version..." I just have an error "server returned 404"
You need to install it from a .vsix file. You can find them here.
Download the .vsix file of the version you want. You may have to click assets to see them.
Then open VSCode, go to extensions -> click on the three dots -> install from vsix and select your file.
To install the .vsix you can also use the command
code --install-extension ms-python-release.vsix
sources :
- How can I install Visual Studio Code extensions offline?
- https://code.visualstudio.com/docs/editor/extension-gallery#_install-from-a-vsix
This can be done using "Install Another Version" option available with VS Code extension store.
Go to extensions.
Click on Gear Icon for the installed extension
Click on Install Another Version
And select the version you wish to install
The 404 issue is a bug in the VS Code marketplace. They are actively working to fix the problem.
I am Trying to make a Program that uses Speech Recognition (SR), And I know that a popular library for this in Speech Recognition. I download speech recognition with pip install SpeechRecognition. I found Out while working on the code I need PyAudio. I tried to install this however it gave me the following error. error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": https://visualstudio.microsoft.com/downloads/. I have looked for tutorials on how to download this, and I have download it, but it still does not work. Can someone please give me a more detailed explination or point me towards a video on how to install it for python on windows and Add it to the path. Thanks.
This problem was solved a long time agoo =]] Why you do not search on google before to ask?
Go to this commend and click on the link what is there and install it manualy.
The link what you will need to found is something like this:people.csail.mit.edu/hubert/pyaudio/packages/….
#andew i also had the same issue but then when i installed it it showed that the debuger is not working so i downeadeed my pthon version by first install th version 3.6.0 from python.org and then is visual studio code i chose the 3.6.0 interpreter and booooom it worked