I want to use the pyodide package on a data analysis project on vs code but i can't install this packcage , I need help please
I tried to run pip install pyodide but i have this problem :
Collecting pyodide
Using cached pyodide-0.0.2.tar.gz (19 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [7 lines of output]
Traceback (most recent call last):
File "", line 2, in
File "", line 34, in
File "C:\Users\Mouad\AppData\Local\Temp\pip-install-hytn_jkn\pyodide_d2f2163c84794780a8a92f7a373c9c76\setup.py", line 7, in
raise ValueError(
ValueError: Pyodide is a Python distribution that runs in the browser or Node.js. It cannot be installed from PyPi.
See https://github.com/pyodide/pyodide for how to use Pyodide.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Related
Im trying to install pylibfreenect in Pycharm but its giving me this error message:
Collecting pylibfreenect2
Using cached pylibfreenect2-0.1.4.tar.gz (125 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\Steffen\AppData\Local\Temp\pip-install-wbvm76g8\pylibfreenect2_46804a2858bc48829d3d48cfaa63fcde\setup.py", line 25, in <module>
raise OSError("{}: is not found".format(libfreenect2_configh_path))
OSError: /usr/local/include\libfreenect2\config.h: is not found
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
I looked up the GitHub forum https://github.com/OpenKinect/libfreenect but I dont know how to install libfreenect from there.
I know it cannot find config.h because the website is down. How can I still install it?
If possible detailed instructions please.
To intall libfreenect2 on Windows, you need to install few dependencies libusb, TurboJPEG, GLFW.
And then you need to clone libfreenect2 repo to build using make && make install command. This will install libfreenect2 on your machine.
Same steps are for MacOS.
See this readme for detailed steps - https://github.com/OpenKinect/libfreenect2/blob/master/README.md
I have Python 3.9 installed on Cygwin on WIndows.
I also have XAMPP installed, which provides MariaDB v 10.4.24.
I am trying to write Python scripts that read data from this database.
I am trying to install the Python MariaDB module using:
python3.9.exe -m pip3 install mariadb
But this errors as follows:
python3.9.exe -m pip install mariadb
Collecting mariadb
Using cached mariadb-1.1.4.zip (97 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [8 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-xws9o_01/mariadb_c1764ac5dcde44ab9a779bf22da89a5b/setup.py", line 27, in <module>
cfg = get_config(options)
File "/tmp/pip-install-xws9o_01/mariadb_c1764ac5dcde44ab9a779bf22da89a5b/mariadb_posix.py", line 64, in get_config
print('MariaDB Connector/Python requires MariaDB Connector/C '
TypeError: not enough arguments for format string
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
-----> Installing requirements with pip
Collecting Flask==0.8
Downloading Flask-0.8.tar.gz (494 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'error'
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [7 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-b10vp26m/flask_796f31ca16564e4e937e606cfdff087d/setup.py", line 62
print "Audit requires PyFlakes installed in your system."""
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)?
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
! Push rejected, failed to compile Python app.
! Push failed
I am attempting to deploy a Discord Bot to Heroku for more uptime, and I am getting this error when I attempt to do a manual deployment on the Heroku App.
My requirements.txt file:
Flask==0.8
Jinja2==2.6
Werkzeug==0.8.3
certifi==0.0.8
chardet==1.0.1
distribute==0.6.24
gunicorn==0.14.2
requests==0.11.1
pyflakes==2.5.0
Are there any dependencies I am missing? And is this even the right way to go about this?
I know I am missing Pyflakes but it is in my requirements file so I am not sure.
Flask 0.8 is over 11 years old and made for an older version of Python, you should specify newer versions of packages in your requirements, for example Flask==2.2.2.
You should make sure your code is compatible with the latest versions and update the dependencies.
(tensorholo) C:\Users\alaba\Desktop\MIT PROJECT\tensor_holography-main>pip install nvidia-tensorflow[horovod]
Collecting nvidia-tensorflow[horovod]
Downloading nvidia-tensorflow-0.0.1.dev5.tar.gz`` (7.9 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [19 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\alaba\AppData\Local\Temp\pip-install-ztjzt002\nvidia-tensorflow_001bf7a090024c37a3c7ff91374ac7c4\setup.py", line 150, in <module>
raise RuntimeError(open("ERROR.txt", "r").read())
RuntimeError:
###########################################################################################
The package you are trying to install is only a placeholder project on PyPI.org repository.
This package is hosted on NVIDIA Python Package Index.
This package can be installed as:
```
$ pip install nvidia-pyindex
$ pip install nvidia-tensorflow
```
Please refer to NVIDIA instructions: https://github.com/NVIDIA/tensorflow#install.
###########################################################################################
This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
nvidia-tensorflow[horovod] package doesn't support the Windows platform. You'd need to run it inside a WSL2 (Windows Subsystem for Linux version 2) to make it work on Windows.
Like the official docs say:
The nvidia-tensorflow package includes CPU and GPU support for Linux.
And also this issue on the same repository:
I'm trying to install heatmap with pip but this error comes out and I don't know how to solve it.
This is the error that cmd shows to me.
$ pip3 install heatmap
Collecting heatmap
Using cached heatmap-2.2.1.zip (25 kB)
Preparing metadata (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> [7 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\giada\AppData\Local\Temp\pip-install-aq8mcl9q\heatmap_ea8ca237b3b44b6c99b25c44bf100681\setup.py", line 15
print "On Windows, skipping build_ext."
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print("On Windows, skipping build_ext.")?
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Version:
pip: pip 22.0.4
python: Python 3.9.7
That's a syntax error indicative of Python 2 syntax in Python 3.
The heatmap project is compatible with Python 2 only, quoth their website:
Requires Python 2.5+.
That latest version is from 2013, anyway. You'll need to find a more modern, or at least maintained, version to work with Python 3.