We Keep Coding

How to continue running pytest when python crashes?

I'm running GTK GUI tests with pytest-xdist pytestplugin via following command
C:\python.exe -m pytest --showlocals --durations=10 -n1 C:\code\tests\gui
on Windows 7.
Python process tends to have INTERNALERROR for unknown reasons to me so I use -n1 to restart the process again with remaining tests.
But there is a problem, dialog bellow pauses creation of a new process and I don't know how to close it automatically.
Is there a way to avoid creation of new dialogs or any other way to work around this?

So the dialog is generated by windows, so to disable it follow these steps:
Start gpedit.msc
Navigate to Computer Configuration->Administrative Templates->Windows Components->Windows Error Reporting
On right pane select Prevent display of the user interface for critical errors and set Enabled

PyCharm running Python file always opens a new console

I initially started learning Python in Spyder, but decided to switch to PyCharm recently, hence I'm learning PyCharm with a Spyder-like mentality.
I'm interested in running a file in the Python console, but every time I rerun this file, it will run under a newly opened Python console. This can become annoying after a while, as there will be multiple Python consoles open which basically all do the same thing but with slight variations.
I would prefer to just have one single Python console and run an entire file within that single console. Would anybody know how to change this? Perhaps the mindset I'm using isn't very PyCharmic?

There is a specific option in PyCharm 2018.2+: Settings | Build, Execution, Deployment | Console | Use existing console for "Run with Python console".
Run with Python console is an option you have enabled in the Run Configuration. Disable it if you don't need a Python console after a script execution:

Hi: If you are looking for re running the code again in the same python console everytime then you have to check the respective box in the Project settings as shown in image below.

To allow only one instance to run, go to "Run" in the top bar, then "Edit Configurations...". Finally, check "Single instance only" at the right side. This will run only one instance and restart every time you run.

One console is one instance of Python being run on your system. If you want to run different variations of code within the same Python kernel, you can highlight the code you want to run and then choose the run option (Alt+Shift+F10 default).

You have an option to Rerun the program.
Simply open and navigate to currently running app with:
Alt+4 (Windows)
⌘+4 (Mac)
And then rerun it with:
Ctrl+R (Windows)
⌘+R (Mac)
Another option:
Show actions popup:
Ctrl+Shift+A (Windows)
⇧+⌘+A (Mac)
And type Rerun ..., IDE then hint you with desired action, and call it.

I think that what you are looking for is the last option in this window; check it and it should work.
Settings -> Build, Execution, Deployment -> Console

Pydev Django project compilation

I installed pydev and eclipse to compile a django project. Everything looks good but one thing makes me crazy. When i change something in the code, i click to save it and hope to see the effect of changes. However, I cannot see the effect of what i change unless I terminate the program and re-run as as shown below. It is such a pain...
I used to use Pycharm, but it expired. In Pycharm, when the program runs once, i do not need to run it again and again. I can easily see the effect of my changes on the code by clicking save button. Is it possible to see the same thing in pydev and eclipse? Do you guys also see this issue?

To debug Django with the autoreload feature, the Remote Debugger must be used and a patch must be applied to your code (just before the if _name_ == "_main_": in your manage.py module):
import pydevd
pydevd.patch_django_autoreload(
patch_remote_debugger=True, #Connect to the remote debugger.
patch_show_console=True
)
So, doing that, starting the remote debugger and making a regular run should enable all the regular breakpoints that are put inside Eclipse to work in the Django process with the Remote Debugger (and the --noreload that PyDev added automatically to the launch configuration must be removed).
I have plans on improving that so that the debugger will automatically add tracing to spawned processes (probably for the next release), but on PyDev 3.3.3 this still requires doing this manual patch and using the remote debugger.
The above is related to a debug run. Now, on to the regular run...
When you do a run as > pydev: django, it should create a run configuration (which you can access at run > run configuration). Then, open that run configuration > arguments and remove the '--noreload' (leaving only the 'runserver' argument).
Then, you can simply rerun it with Ctrl+F11 (if you've set it to launch the previously launched application as indicated in http://pydev.org/manual_101_run.html)
-- (Or alternatively you can run it with: Alt + R, T, 1).
The only problem is that if you kill the process inside Eclipse it's possible that it leaves zombie processes around, so, you can use the pydevd.patch_django_autoreload(patch_show_console=True) as indicated above to open a console each time it spawns a new process (you can do a pydevd|<- ctrl space here to add an import to pydevd).
Note that this should work. If it's not working, make sure you don't have zombie processes around from a previous session (in windows you can do: taskkill /F /IM python.exe to make sure all Python processes are killed).
Another note (for when you don't actually have automatic reload): Ctrl+Shift+F9 will kill the currently running process and re-run it.

Python curses Redirection is not supported

I am trying to use Curses in PyDev in Eclipse in Win7.
I have installed Python 3.2 (64bit) and curses-2.2.win-amd64-py3.2. When I input the following testing codes into PyDev:
import curses
myscreen = curses.initscr()
myscreen.border(0)
myscreen.addstr(12, 25, "Python curses in action!")
myscreen.refresh()
myscreen.getch()
curses.endwin()
It did not show any syntax error, so I think the curses was installed correctly.
However, when I ran it as Python Run, the output showed: Redirection is not supported. I do not know where this problem comes from. I googled a lot but can't find related information.

Recent PyCharm versions (I am currently running 2017.2, not sure when this option was added, or if it has been there the entire time) have the option "Emulate terminal in output console". Curses works with this option checked.

You cannot expect to use curses with a non-terminal.
Probably you get this because you are running the script from inside an IDE, like PyCharm or any other.
All IDEs do provide consoles that are not terminals, so that's where the problem comes from.

For a Pycharm user the solution given by codeape works fine :
Snapshot

You can't use any IDE to run python files with the curses package. I used to run in pycharm and naturally couldn't run.
Change to the command line to run:
for testing follow my following steps
on desktop open notepad and copy paste the code and save it as filename.py
open command line change directory to desktop use below command cd Desktop and hit enter type python example.py and hit enter, your program will definitely run

My workaround is to create a Run Configuration that calls a curses script. The little overhead is worth not having to switch to the terminal and manually run the script hundreds of times a session. I use Intellij but I imagine the process should be similar in PyCharm.
The desired result is the convenience of a button to run the script:
First create a script that calls the entry script, for instance:
ptyhon name-of-script.py
Then, to create a configuration for each script:
Go to Edit configuration.
Click the plus button and add a Shell Script.
Enter the path to a shell script.
Here is a picture of a directory with a couple of sample scripts.
I use this process to view my progress. My curses scripts are very modest so fortunately I can live without a debugger.

How can I debug Python code without running a script (using Eclipse)?

I've noticed how easy it is to debug a Python script from Eclipse. Simply set breakpoints and run a Python script from the debug menu. But is it possible to start a Python Interactive Interpreter instead of running a particular Python script, whilst still having Eclipse breaking on breakpoints? This would make it so much easier to test functions.
Thanks for any help
Still looking for a simple/ish way to start the debugger in Eclipse->PyDev that lets me use the interactive debugger. None of the answers as of yet is acceptable

You can explicitly write code to setup a breakpoint in your script, and then "remote debug". That means having pydevd in the pythonpath of your script wherever it is running, and running the eclipse pydev remote debugger on your devbox. If it's all happening on the same machine, this is fairly straightforward.
If not, you'll need to specify the hostname of the dev machine running the python remote debugger in the call to settrace(). You'll also need pydevd available on the machine running the script.
I have got this working in the past without having to install eclipse+pydevd on the machine running the script. It's not totally straightforward, and if you go that route I'd recommend checking that the pydevd versions match or at least you know they're compatible. Otherwise you end up wasting time debugging the debugger.
For details see: Pydev Remote Debugger

what about this, in the script, you can write a function, say onlyForTest, then each time you write a new function and want to test it, you can just put it in the onlyForTest function, then specify some arguments required by the new function you just write, then open the interactive python shell, import the script, call the onlyForTest function, check out the result.