I am running Ubuntu 22.04 with xorg.
I need to find a way to compile microbit python code locally to a firmware hex file. Firstly, I followed the guide here https://microbit-micropython.readthedocs.io/en/latest/devguide/flashfirmware.html.
After a lot of debugging, I got to this point: https://pastebin.com/MGShD31N
However, the file platform.h does exist.
sawntoe#uwubuntu:~/Documents/Assignments/2022/TVP/micropython$ ls /home/sawntoe/Documents/Assignments/2022/TVP/micropython/yotta_modules/mbed-classic/api/platform.h
/home/sawntoe/Documents/Assignments/2022/TVP/micropython/yotta_modules/mbed-classic/api/platform.h
sawntoe#uwubuntu:~/Documents/Assignments/2022/TVP/micropython$
At this point, I gave up on this and tried using Mu editor with the AppImage. However, Mu requires wayland, and I am on xorg.
Does anyone have any idea if this is possible? Thanks.
Mu and the uflash command are able to retrieve your Python code from .hex files. Using uflash you can do the following for example:
uflash my_script.py
I think that you want is somehow possible to do, but its harder than just using their web python editor: https://python.microbit.org/v/2
Peter Till answers the original question. The additional below adds to this answer by showing how to automate the build and load process. I use Debian. The original question states that Ubuntu is used, which is built on Debian.
A script to find and mount the micro:bit
When code is loaded to the micro:bit, the board is dismounted from the system. So each time you have new code to load, you have to remount the board.
I modified a script to find and mount the micro:bit.
#!/bin/bash
BASEPATH="/media/$(whoami)/"
MICRO="MICROBIT"
if [ $# -eq 0 ]
then
echo "no argument supplied, use 'mount' or 'unmount'"
exit 1
fi
if [ $1 == "--help" ]
then
echo "mounts or unmounts a BBC micro:bit"
echo "args: mount - mount the microbit, unmout - unmount the microbit"
fi
# how many MICRO found in udiksctl dump
RESULTS=$(udisksctl dump | grep IdLabel | grep -c -i $MICRO)
case "$RESULTS" in
0 ) echo "no $MICRO found in 'udkisksctl dump'"
exit 0
;;
1 ) DEVICELABEL=$(udisksctl dump | grep IdLabel | grep -i $MICRO | cut -d ":" -f 2 | sed 's/^[ \t]*//')
DEVICE=$(udisksctl dump | grep -i "IdLabel: \+$DEVICELABEL" -B 12 | grep " Device:" | cut -d ":" -f 2 | sed 's/^[ \t]*//')
DEVICEPATH="$BASEPATH""$DEVICELABEL"
echo "found one $MICRO, device: $DEVICE"
if [[ -z $(mount | grep "$DEVICE") ]]
then
echo "$DEVICELABEL was unmounted"
if [ $1 == "mount" ]
then
udisksctl mount -b "$DEVICE"
exit 0
fi
else
echo "$DEVICELABEL was mounted"
if [ $1 == "unmount" ]
then
udisksctl unmount -b "$DEVICE"
exit 0
fi
fi
;;
* ) echo "more than one $MICRO found"
;;
esac
echo "exiting without doing anything"
I alias this script to mm in my .bashrc file.
Automate mounting the micro:bit and flashing the python file
I use the inotifywait command to run mm and to then run uflash to load the .py file I am working on. Each time that the python file is saved, the aliased command mm is run followed by the uflash command.
while inotifywait -e modify <your_file>.py ; do mm && uflash <your_file>.py ; done
Okay, so elaborating on Peter Till's answer.
Firstly, you can use uflash:
uflash path/to/your/code .
Or, you can use microfs:
ufs put path/to/main.py
Working Ubuntu 22.04 host CLI setup with Carlos Atencio's Docker to build your own firmware
After trying to setup the toolchain for a while, I finally decided to Google for a Docker image with the toolchain, and found https://github.com/carlosperate/docker-microbit-toolchain at this commit from Carlos Atencio, a Micro:Bit foundation employee, and that just absolutely worked:
# Get examples.
git clone https://github.com/bbcmicrobit/micropython
cd micropython
git checkout 7fc33d13b31a915cbe90dc5d515c6337b5fa1660
# Get Docker image.
docker pull ghcr.io/carlosperate/microbit-toolchain:latest
# Build setup to be run once.
docker run -v $(pwd):/home --rm ghcr.io/carlosperate/microbit-toolchain:latest yt target bbc-microbit-classic-gcc-nosd#https://github.com/lancaster-university/yotta-target-bbc-microbit-classic-gcc-nosd
docker run -v $(pwd):/home --rm ghcr.io/carlosperate/microbit-toolchain:latest make all
# Build one example.
docker run -v $(pwd):/home --rm ghcr.io/carlosperate/microbit-toolchain:latest \
tools/makecombinedhex.py build/firmware.hex examples/counter.py -o build/counter.hex
# Build all examples.
docker run -v $(pwd):/home --rm ghcr.io/carlosperate/microbit-toolchain:latest \
bash -c 'for f in examples/*; do b="$(basename "$f")"; echo $b; tools/makecombinedhex.py build/firmware.hex "$f" -o "build/${b%.py}.hex"; done'
And you can then flash the example you want to run with:
cp build/counter.hex "/media/$USER/MICROBIT/"
Some further comments at: Generating micropython + python code `.hex` file from the command line for the BBC micro:bit
Related
I need to write a script in bash/python to scp the latest file which arrives at a given folder.That is I am continously getting files into a folder say (/home/ram/Khopo/) I need to scp it into xxx#192.168.21.xxx in /home/xxx/khopo/.
I googled and got this result
file_to_copy=`ssh username#hostname 'ls -1r | head -1'`
echo copying $file_to_copy ...
scp username#hostname:$file_to_copy /local/path
But I want to know whether it is possible do this such that it runs only when a new folder arrives at the source(/home/ram/Khopo/) and waits for the file to reach the folder and do it immediately when it has arrived
I would try to sync the remote directory. This should give you nice outlook, how to do that:
rsync:
https://askubuntu.com/a/105860
https://www.atlantic.net/hipaa-compliant-cloud-storage/how-to-use-rsync-copy-sync-files-servers/
or other tools for syncing:
https://en.wikipedia.org/wiki/Comparison_of_file_synchronization_software
As others have suggested you can use inotifywait, below an example of what you could do in bash:
#!/bin/bash
echo "Enter ssh password"
IFS= read -rs password # Read the password in a hidden way
inotifywait -m -e create "/folder_where_files_arrive" | while read line
do
file_to_copy=$(echo $line | cut -d" " -f1,3 --output-delimiter="")
echo copying $file_to_copy ...
if [[ -d $file_to_copy ]]; then # is a directory
sshpass -p $password scp -r username#hostname:$file_to_copy /local/path
elif [[ -f $file_to_copy ]]; then # is a file
sshpass -p $password scp username#hostname:$file_to_copy /local/path
fi
done
Then you would ideally put this script to run in background, e.g.,:
nohup script.sh &
For sshpass you can install it in ubunut/debian with:
apt install sshpass
Could you please show me how to implement git hook?
Before committing, the hook should run a python script. Something like this:
cd c:\my_framework & run_tests.py --project Proxy-Tests\Aeries \
--client Aeries --suite <Commit_file_Name> --dryrun
If the dry run fails then commit should be stopped.
You need to tell us in what way the dry run will fail. Will there be an output .txt with errors? Will there be an error displayed on terminal?
In any case you must name the pre-commit script as pre-commit and save it in .git/hooks/ directory.
Since your dry run script seems to be in a different path than the pre-commit script, here's an example that finds and runs your script.
I assume from the backslash in your path that you are on a windows machine and I also assume that your dry-run script is contained in the same project where you have git installed and in a folder called tools (of course you can change this to your actual folder).
#!/bin/sh
#Path of your python script
FILE_PATH=tools/run_tests.py/
#Get relative path of the root directory of the project
rdir=`git rev-parse --git-dir`
rel_path="$(dirname "$rdir")"
#Cd to that path and run the file.
cd $rel_path/$FILE_PATH
echo "Running dryrun script..."
python run_tests.py
#From that point on you need to handle the dry run error/s.
#For demonstrating purproses I'll asume that an output.txt file that holds
#the result is produced.
#Extract the result from the output file
final_res="tac output | grep -m 1 . | grep 'error'"
echo -e "--------Dry run result---------\n"${final_res}
#If a warning and/or error exists abort the commit
eval "$final_res" | while read -r line; do
if [ $line != "0" ]; then
echo -e "Dry run failed.\nAborting commit..."
exit 1
fi
done
Now every time you fire git commit -m the pre-commit script will run the dry run file and abort the commit if any errors have occured, keeping your files in the stagin area.
I have implemented this in my hook. Here is the code snippet.
#!/bin/sh
#Path of your python script
RUN_TESTS="run_tests.py"
FRAMEWORK_DIR="/my-framework/"
CUR_DIR=`echo ${PWD##*/}`
`$`#Get full path of the root directory of the project under RUN_TESTS_PY_FILE
rDIR=`git rev-parse --git-dir --show-toplevel | head -2 | tail -1`
OneStepBack=/../
CD_FRAMEWORK_DIR="$rDIR$OneStepBack$FRAMEWORK_DIR"
#Find list of modified files - to be committed
LIST_OF_FILES=`git status --porcelain | awk -F" " '{print $2}' | grep ".txt" `
for FILE in $LIST_OF_FILES; do
cd $CD_FRAMEWORK_DIR
python $RUN_TESTS --dryrun --project $CUR_DIR/$FILE
OUT=$?
if [ $OUT -eq 0 ];then
continue
else
return 1
fi
done
I have been following this tutorial to install opencv and python:
https://www.pyimagesearch.com/2015/06/22/install-opencv-3-0-and-python-2-7-on-ubuntu/#comment-441393
The only difference is that I am trying to install opencv 3.3.1 instead of 3.0.0
I'm running on a laptop with Ubuntu 14.04 an i7 and NVIDIA GTX950M
The problem is that when I execute the command ldconfig
$ sudo make install
$ sudo ldconfig
I get the following message:
/sbin/ldconfig.real: /usr/lib/nvidia-384/libEGL.so.1 is not a symbolic link
/sbin/ldconfig.real: /usr/lib32/nvidia-384/libEGL.so.1 is not a symbolic link
So I found a solution to the problem:
Source: https://askubuntu.com/questions/900285/libegl-so-1-is-not-a-symbolic-link #muru #Gerard Tromp
The following is an easy-to-use version of Noisy_Botnet's solution. It
facilitates repeating the process for any update.
Create a shell script, i.e., paste the code bellow a text file, and save it with the .sh extension.
Change the executing permissions of the file i.e., go to the location of the file in the terminal and execute the following command $sudo chmod 744 nameofthefieleyoucreated.sh
execute the following command $sudo ./nameofthefileyoucreated.sh
#! /bin/sh
#
# find the file in /usr/lib
LIBEGL=`find /usr/lib/nvidia* -name libEGL.so.\* | egrep "[0-9][0-9]*\.[0-9][0-9]*$"`
LIBEGL_LINK=`echo $LIBEGL | sed 's/[0-9][0-9]*\.[0-9][0-9]*$/1/'`
printf "\n\nThe following commands will be executed:\n+++++++++++++++++++++++++++++++++++++++\n"
printf "mv $LIBEGL_LINK ${LIBEGL_LINK}.orig\nln -s $LIBEGL $LIBEGL_LINK\n\n"
while true; do
read -p "Do you wish to perform these commands? " yn
case $yn in
[Yy]* ) mv $LIBEGL_LINK ${LIBEGL_LINK}.orig; ln -s $LIBEGL $LIBEGL_LINK ; break;;
[Nn]* ) break;;
* ) echo "Please answer yes or no.";;
esac
done
# find the file in /usr/lib32
LIBEGL=`find /usr/lib32/nvidia* -name libEGL.so.\* | egrep "[0-9][0-9]*\.[0-9][0-9]*$"`
LIBEGL_LINK=`echo $LIBEGL | sed 's/[0-9][0-9]*\.[0-9][0-9]*$/1/'`
printf "\n\nThe following commands will be executed:\n+++++++++++++++++++++++++++++++++++++++\n"
printf "mv $LIBEGL_LINK ${LIBEGL_LINK}.orig\nln -s $LIBEGL $LIBEGL_LINK\n\n"
while true; do
read -p "Do you wish to perform these commands? " yn
case $yn in
[Yy]* ) mv $LIBEGL_LINK ${LIBEGL_LINK}.orig; ln -s $LIBEGL $LIBEGL_LINK ; break;;
[Nn]* ) break;;
* ) echo "Please answer yes or no.";;
esac
done
Running this on osx...
cd ${BUILD_DIR}/mydir && for DIR in $(find ./ '.*[^_].py' | sed 's/\/\//\//g' | awk -F "/" '{print $2}' | sort |uniq | grep -v .py); do
if [ -f $i/requirements.txt ]; then
pip install -r $i/requirements.txt -t $i/
fi
cd ${DIR} && zip -r ${DIR}.zip * > /dev/null && mv ${DIR}.zip ../../ && cd ../
done
cd ../
error:
(env) ➜ sh package_lambdas.sh find: .*[^_].py: No such file or directory
why?
find takes as an argument a list of directories to search. You provided what appears to be regular expression. Because there is no directory named (literally) .*[^_].py, find returns an error.
Below I have revised your script to correct that mistake (if I understand your intention). Because I see so many ill-written shell scripts these days, I've taken the liberty of "traditionalizing" it. Please see if you don't also find it more readable.
Changes:
use #!/bin/sh, guaranteed to be on an Unix-like system. Faster than bash, unless (like OS X) it is bash.
use lower case for variable names to distinguish from system variables (and not hide them).
eschew braces for variables (${var}); they're not needed in the simple case
do not pipe output to /usr/bin/true; route it to dev/null if that's what you mean
rm -f by definition cannot fail; if you meant || true, it's superfluous
put then and do on separate lines, easier to read, and that's how the Bourne shell language was meant to be used
Let && and || serve as line-continuation, so you can see what's happening step by step
Other changes I would suggest:
Use a subshell when changing the working directory temporarily. When it terminates, the working directory is restored automatically (retained by the parent), saving you the cd .. step, and errors.
Use set -e to cause the script to terminate on error. For expected errors, use || true explicitly.
Change grep .py to grep '\.py$', just for good measure.
To avoid Tilting Matchstick Syndrome, use something other than / as a sed substitute delimiter, e.g., sed 's://:/:g'. But sed could be avoided altogether with awk -F '/+' '{print $2}'.
Revised version:
#! /bin/sh
src_dir=lambdas
build_dir=bin
mkdir -p $build_dir/lambdas
rm -rf $build_dir/*.zip
cp -r $src_dir/* $build_dir/lambdas
#
# The sed is a bit complicated to be osx / linux cross compatible :
# ( .//run.sh vs ./run.sh
#
cd $build_dir/lambdas &&
for L in $(find . -exec grep -l '.*[^_].py' {} + |
sed 's/\/\//\//g' |
awk -F "/" '{print $2}' |
sort |
uniq |
grep -v .py)
do
if [ -f $i/requirements.txt ]
then
echo "Installing requirements"
pip install -r $i/requirements.txt -t $i/
fi
cd $L &&
zip -r $L.zip * > /dev/null &&
mv $L.zip ../../ &&
cd ../
done
cd ../
The find(1) manpage says its args are [path ...] [expression], where "expression" consists of "primaries" and "operands" (-flags). '.*[^-].py' doesn't look like any expression, so it's being interpreted as a path, and it's reporting that there is no file named '.*[^-].py' in the working directory.
Perhaps you meant:
find ./ -regex '.*[^-].py'
Rope is a refactoring library for Python and RopeVim is a Vim plugin which calls into Rope.
The idea of using RopeVim seems great to me, is there any documentation on "getting started" with RopeVim?
I've followed what documentation there is: https://bitbucket.org/agr/ropevim/src/tip/README.txt
I suppose I'm looking for:
look at this blog post / article
/ link it makes it all make sense.
alternate recommendations like
"forget about RopeVim", it doesn't
work very well or say "use this
instead of ropevim".
For basic renaming, hover your vim cursor over the variable/method/etc that you wish to rename and then type:
:RopeRename <enter>
From there it should be self-explanatory. It asks for the root path to the project you wish to do the renaming in. Then it asks you for the new name. Then you can preview/confirm changes.
If you have tab-complete setup in your vim command-area you can look through the other rope features by typing:
:Rope<Tab>
The documentation you found only shows the Vim particulars. If you want to see what those rope functions can do, see the rope documentation. Note, it's incomplete and points to the unittests for a full overview of what it can do.
i use this script and is the best to automate all the process
https://gist.github.com/15067
#!/bin/bash
# Plant rope vim's plugin
# This is a script to install or update 'ropevim'
# Copyright Alexander Artemenko, 2008
# Contact me at svetlyak.40wt at gmail com
function create_dirs
{
mkdir -p src
mkdir -p pylibs
}
function check_vim
{
if vim --version | grep '\-python' > /dev/null
then
echo You vim does not support python plugins.
echo Please, install vim with python support.
echo On debian or ubuntu you can do this:
echo " sudo apt-get install vim-python"
exit 1
fi
}
function get_or_update
{
if [ -e $1 ]
then
cd $1
echo Pulling updates from $2
hg pull > /dev/null
cd ..
else
echo Cloning $2
hg clone $2 $1 > /dev/null
fi
}
function pull_sources
{
cd src
get_or_update rope http://bitbucket.org/agr/rope
get_or_update ropevim http://bitbucket.org/agr/ropevim
get_or_update ropemode http://bitbucket.org/agr/ropemode
cd ../pylibs
ln -f -s ../src/rope/rope
ln -f -s ../src/ropemode/ropemode
ln -f -s ../src/ropevim/ropevim.py
cd ..
}
function gen_vim_config
{
echo "let \$PYTHONPATH .= \":`pwd`/pylibs\"" > rope.vim
echo "source `pwd`/src/ropevim/ropevim.vim" >> rope.vim
echo "Now, just add \"source `pwd`/rope.vim\" to your .vimrc"
}
check_vim
create_dirs
pull_sources
gen_vim_config
If you can live without vim, use Eric, which has rope support.