Problem running auto py to exe from terminal [duplicate] - python

I have python 3.9 I used the command 'pip install auto-py-to-exe' and it downloaded but when I tried to using the command 'auto-py-to-exe' the program just said " 'auto-py-to-exe' is not recognized as an internal or external command, operable program or batch file.". I have the latest version of PIP and I also have PATH. What can I do to fix this?


This works on VSCode:
python -m auto_py_to_exe


If I install "auto-py-to-exe" using following command, as described in this link as well as from the comment from Justin Ezequiel (above):
python -m pip install auto-py-to-exe
I am able to run it (in Windows 10) using following command:
python -m auto_py_to_exe


This gave me quite a bit of trouble, as none of the above solutions worked for me. Spent lots of time trying to figure out what I should be adding to PATH with no success.
My issue stemmed from (I think) the fact that I have been using python downloaded from the windows store, which uses a different location to store python in.
With the manual install of python (https://www.python.org) you can specify where python is downloaded and automatically add that location to path.
Steps I took to solve the problem:
Uninstall all versions of python downloaded from the windows store via settings (settings > apps > python > uninstall)
Uninstall all version of python via the control panel (control panel > add or remove programs > python x.x.x > uninstall)
Uninstall auto-py-to-exe (pip uninstall auto-py-to-exe) in case it didnt do that automatically
Install python from python.org. (auto-py-to-exe is not supported in versions greater than 3.10 as of 1/23/2023). So I installed Python 3.10
The settings which were successful for me were:
Custom installation,
check install python for all users,
check add to path,
input 'C:\Python310' (with the respective version number) for install location,
install
Check new python version has been installed python --version
Check pip is installed pip --version
Install auto-py-to-exe pip install auto-py-to-exe
When auto-py-to-exe finishes installing, scroll up through the install info and make sure there are no warnings that state there is a location not found in PATH. If there are, you'll have to do some other research on adding those locations to PATH appropriately (since I don't think I was doing that right).
Assuming no PATH warnings,
9. Run auto-py-to-exe


First you need to type in the terminal (not Python):
auto-py-to-exe
If you are currently in python use exit() to exit then try the above code.


It Depends on in which environment you have installed
Make sure to replace {User} with your user
In Conda Enviournment go to below location Manually
C:\Users\{User}\anaconda3\Scripts\auto-py-to-exe.exe
In Pip, Environment go to the location below
C:\Users\{User}\AppData\Local\Programs\Python\Python37-32\Scripts\auto-py-to-exe.exe
or you can add this path to your environment variable as well for accessing these from anywhere


First check you installed it
pip install auto-py-to-exe
then restart your vscode and check another time.
If still an error, check it in CMD.


As suggested above use:
pip show --files auto-py-to-exe to find out in what directory pip has
installed the scripts. Double check the directory is in %PATH%
This will show you where the installer has placed the binary files. I then changed to that directory which circumvents any path issue. I tried to run the files and found :
OSError: [WinError 1920] The file cannot be accessed by the system: 'C:\\Users\\aaaa\\AppData\\Local\\Microsoft\\WindowsApps\\PythonSoftwareFoundation.Python.3.7_qbz5n2kfra8p0\\python.exe'
PS C:\users\aaaa\appdata\local\packages\pythonsoftwarefoundation.python.3.7_qbz5n2kfra8p0\localcache\local-packages\python37\Scripts>
In my case, although I haven't worked out how to fix it yet... It would seem to be trying to refer to an incorrect Python executable, the files in that directory are all 0 length. Unfortunately the "python -m" suggestion didn't work for me, so it's back to the drawing board. Hope that helps you confirm if it's the right solution to chase down.


You need to make sure you have typed cd C:\Users\your_user_name\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.9_qbz5n2kfra8p0\LocalCache\local-packages\Python39\Scripts as a separate command, and then auto-py-to-exe with python 3. Check in file explorer to make sure your path is correct if the cd fails.

Related

I do not know why I get the notification that pip is not on my computer [duplicate]

I'm running into a weird error when trying to install Django on my computer.
This is the sequence that I typed into my command line:
C:\Python34> python get-pip.py
Requirement already up-to-date: pip in c:\python34\lib\site-packages
Cleaning up...
C:\Python34> pip install Django
'pip' is not recognized as an internal or external command,
operable program or batch file.
C:\Python34> lib\site-packages\pip install Django
'lib\site-packages\pip' is not recognized as an internal or external command,
operable program or batch file.
What could be causing this?
This is what I get when I type in echo %PATH%:
C:\Python34>echo %PATH%
C:\Program Files\ImageMagick-6.8.8-Q16;C:\Program Files (x86)\Intel\iCLS Client\
;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:\Windows\S
ystem32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\
Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Progr
am Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Mana
gement Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine C
omponents\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components
\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\P
rogram Files (x86)\nodejs\;C:\Program Files (x86)\Heroku\bin;C:\Program Files (x
86)\git\cmd;C:\RailsInstaller\Ruby2.0.0\bin;C:\RailsInstaller\Git\cmd;C:\RailsIn
staller\Ruby1.9.3\bin;C:\Users\Javi\AppData\Roaming\npm

You need to add the path of your pip installation to your PATH system variable. By default, pip is installed to C:\Python34\Scripts\pip (pip now comes bundled with new versions of python), so the path "C:\Python34\Scripts" needs to be added to your PATH variable.
To check if it is already in your PATH variable, type echo %PATH% at the CMD prompt
To add the path of your pip installation to your PATH variable, you can use the Control Panel or the setx command. For example:
setx PATH "%PATH%;C:\Python34\Scripts"
Note:
According to the official documentation, "[v]ariables set with setx variables are available in future command windows only, not in the current command window". In particular, you will need to start a new cmd.exe instance after entering the above command in order to utilize the new environment variable.
Thanks to Scott Bartell for pointing this out.

For Windows, when you install a package, you type:
python -m pip install [packagename]

As of now, version 3.7.3 I had a little bit of an issue with getting the right system variable.
Try this:
Type start %appdata% in cmd.
After that file explorer should pop up in ../AppData/Roaming.
Go back one directory and navigate to Local/Programs/Python/Python37-32/Scripts.
NOTE: The version number may be different so if you copy and paste the above file path it could not work.
After you do this you now have the correct location of your downloaded Python. Copy your file path by selecting the whole directory in the address bar.
Once you do that click the start icon and navigate to the Control Panel → System and Security → System. Then click "Advanced System Settings" on the left side of the panel.
Once there, click Environment Variables on the bottom right and there will be two boxes, an upper and a lower box. In the upper box: Click on the 'Path' Variable and click Edit located on the right. Click New and paste your directory Path. It should look something like this:
Click OK three times, open a new window of cmd and type: pip. See if it works.

For me the command:
set PATH=%PATH%;C:\Python34\Scripts
worked immediately (try after echo %PATH% and you will see that your path has the value C:\Python34\Scripts).
Thanks to: Adding a directory to the PATH environment variable in Windows

Alternate way.
If you don't want to add the PATH as the previous well written answers pointed out,
but you want to execute pip as your command then you can do that with py -m as prefix.
Given that you have to do it again and again.
eg.
py -m <command>
as in
py -m pip install --upgrade pip setuptools
Also make sure to have pip and py installed

The only way that worked on my Windows 10 machine was as follows:
py -3 -m pip install xxxxx

Also, the long method - it was a last resort after trying all previous answers:
C:\python27\scripts\pip.exe install [package].whl
This after cd in directory where the wheel is located.

As per Python 3.6 Documentation
It is possible that pip does not get installed by default. One
potential fix is:
python -m ensurepip --default-pip

Control Panel -> add/remove programs -> Python -> Modify -> optional Features (you can click everything) then press next -> Check "Add python to environment variables" -> Install
And that should solve your path issues, so jump to command prompt and you can use pip now.

Go to control Panel >> Uninstall or change Program and double click on Python XXX to modify install. Make sure PIP component is checked and install.

I was having the same problem just now.
After adding the proper folder (C:\Python33\Scripts) to the path, I still could not get pip to run. All it took was running
pip.exe install -package- instead of
pip install -package-.

Try going to Windows PowerShell or cmd prompt and typing:
python -m pip install openpyxl

In latest version Python 3.6.2 and above, is available in
C:\Program Files (x86)\Python36-32\Scripts
You can add the path to our environment variable path as below
Make sure you close your command prompt or Git after setting up your path. Also should you open your command prompt in administrator mode. This is example for Windows 10.

Use
set Path = `%PATH%;C:\Python34\;C:\Python27\Scripts`
Source

Or if you are using PyCharm (2017-03-03) like me, just change directory in terminal and install:
cd C:\Users\{user}\PycharmProjects\test\venv\Scripts
pip install ..

Most frequently it is:
in cmd.exe write
python -m pip install --user [name of your module here without brackets]

Even I'm new to this, but pip install django worked for me.
The path should be set as where the script folder of the Python installation is, i.e.C:\Python34\Scripts.
I suppose it's because Django is a framework which is based on Python, and that's why this directory structure has to be maintained while installing.

I have just installed Python 3.6.2.
I got the path as
C:\Users\USERNAME\AppData\Local\Programs\Python\Python36-32\Scripts

In Windows, open cmd and find the location of PYTHON_HOME using where python. Now add this location to your environment variable PATH using:
set PATH=%PATH%;<PYTHON_HOME>\Scripts
Or refer to this.
In Linux, open a terminal and find the location of PYTHON_HOME using which python. Now add the PYTHON_HOME/Scripts to the PATH variable using:
PATH=$PATH:<PYTHON_HOME>\Scripts
export PATH

You can try pip3. Something like:
pip3 install pandas

I was facing the same issue. Run Windows PowerShell as Administrator. It resolved my issue.

None of these actually worked for me, but running
python -m pip install -U pip
and then adding the specified directory to the PATH as suggested got it working

In your Python folder path in Terminal, just type
py -m pip
in order to check the current version of your pip.
You will also see a list of commands, you can use...

I think from Python 2.7.9 and higher pip comes pre installed and it will be in your scripts folder.
So you have to add the "scripts" folder to the path. Mine is installed in C:\Python27\Scripts. Check yours to see what your path is so that you can alter the below accordingly. Then go to PowerShell, paste the below code in PowerShell and hit Enter key. After that, reboot and your issue will be resolved.
[Environment]::SetEnvironmentVariable("Path", "$env:Path;C:\Python27\Scripts", "User")

In a Windows environment, just execute the below commands in a DOS shell.
path=%path%;D:\Program Files\python3.6.4\Scripts;
(new path=current path;path of the Python script folder)

I deleted the older version using the control panel and then installed the new version however the newer version was not reflecting pip even after adding the right paths in the environment variables. However, the thing that worked for me was deleting the folders of old python that were there in the local App folder even after uninstall. For me, the path was like below. Deleting this folder solved my issue
C:\Users\username\AppData\Local\Programs\Python38

'pip' is not recognized as an internal or external command
pip is a python module used to install packages. For your problem, there can be many reasons;
Restart CMD/Terminal
Environment variable is not set. pip is installed but environment variable is not set. Environment variable is a windows variable where pip path is saved, so it can be run at run time.
pip is not installed.
Restart CMD/Terminal
It is sometimes possible that you opened your command prompt or terminal before installing pip and now it just needs a restart to pick up the latest environment variables. It is worth trying just restarting your command prompt or terminal.
Environment Variable is Not Set
Open CMD and run this command to see the values set in the PATH environment variable.
echo %PATH%
This will echo the PATH environment variable like this;
You should check if your path exist in the echoed PATH list. For example, in my case, the path for pip.exe files is C:\Python310\Scripts. You can check this path yourself like this;
If you can find pip path and it does not exist the echoed PATH variable, then we need to add it. Copy the path like C:\Python310\Scripts.
Go to Start > This PC > Properties > Advance system settings >
Advanced > Environment Variables
As shown in the image above, Select Path, click Edit button and add the copied path. Restart the CMD and test pip command again.
pip is Not Installed
If pip is not installed, you can install it again by downloading latest python.exe setup from python.org website. Make sure you check mark the pip option as shown in the image below.
In the next step, check mark "Add Python to environment variables"

I had this same issue. You just need to go to your
C:\Python27\Scripts
and add it to environment variables. After path setting just run pip.exe file on C:\Python27\Scripts and then try pip in cmd. But if nothing happens try running all pip applications like pip2.7 and pip2.exe. And pip will work like a charm.

Small clarification: in "Windows 7 64 bit PC", after adding ...Python34\Scripts to the path variable, pip install pygame didn't work for me.
So I checked the "...Python34\Scripts" folder, it didn't have pip, but it had pip3 and pip3.4. So I ran pip3.4 install pygame .... .whl. It worked.
(Further open a command window in the same folder where you have the downloaded pygame...whl file.)

When installing SQL 2019 Python, there are known issues for PIP which require a fix (step 7)
https://learn.microsoft.com/en-us/sql/advanced-analytics/known-issues-for-sql-server-machine-learning-services?view=sql-server-ver15
pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Workaround
Copy the following files:
libssl-1_1-x64.dll
libcrypto-1_1-x64.dll
from the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\Library\bin
to the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\DLLs
Then open a new DOS command shell prompt.

pipenv search python in old directory do not exist

I would to create new Python project which include pipenv for manage my packages.
But when I try to install package with it, it throw me I exception :
ValueError: Not a valid python path:
'C:/dev/Anaconda3/Scripts/python.exe'
I try pipenv command with 2 differents emulation terminal (Cmder and Terminus) which produce same result.
In old time a try Anaconda solutions for work with Python. But now I don't want use this and I uninstall Anaconda in my OS.
It seems that my OS keep old reference to this python executable into Anaconda in your PATH... But I display my 2 PATH variables OS (PATH system OS and PATH user) and nothing has this location path into your string.
The directory c:\dev\Anaconda3 doesn't exist !
I try to search uninstall Anaconda program in my tool application manager Windows but Anaconda is not diplayed in that listing. It seems to be good uninstalled.
I install correctly pipenv executable : pipenv --version
pipenv, version 2020.6.2
I install correctly python executable : python --version
Python 3.8.3
I added 3 differents PATH python for my OS PATH (system PATH and user PATH) :
C:\dev\python\Python38
C:\dev\python\Python38\Scripts\
C:\dev\python\Python38\Scripts\bin
Why I keep old reference to Anaconda program ?
Why many program search python in same old deleted path and PATH variable do not included this ?
How pipenv created his PATH environment variable ?

I had a Python2.7 instance giving me the same problem. I copy/pasted its python.exe into the Scripts folder. So it now found a real python.exe there. Once I did this it continued on happily. And now I was able to use the Python3.9 version i wanted it to use anyways.
It seems like the python searcher should be a little more tolerant and just ignore poorly formed python releases. There is an open ticket for this: https://github.com/pypa/pipenv/issues/4334

I had a similar error because of an incorrectly uninstalled Anaconda. To see if you have the same problem, go to System Settings > Add or remove programs, and check for anything unexpected matching "conda". Trying to uninstall it results in an error because the uninstall.exe file cannot be found.
Searching around, I saw a few posts that said to mess with regedit, but that's scary. Instead, I re-installed the version of Anaconda that I needed to uninstall (you can do that with https://repo.anaconda.com/archive/Anaconda3-2020.02-Windows-x86_64.exe, replacing 2020.02 with your Anaconda version), and then uninstalling it via the proper uninstaller via "Add or remove programs". After a restart, the phantom Anaconda python was gone

You need to delete the old path in the Windows Registry.
Hit win + r
regedit
find folders with (Anaconda3 or Miniconda3).
Probably two folders. Do not delete folders with the new path to Python.

'pip' is not recognized as an internal or external command (i tried adding pip to my path) [duplicate]

I'm running into a weird error when trying to install Django on my computer.
This is the sequence that I typed into my command line:
C:\Python34> python get-pip.py
Requirement already up-to-date: pip in c:\python34\lib\site-packages
Cleaning up...
C:\Python34> pip install Django
'pip' is not recognized as an internal or external command,
operable program or batch file.
C:\Python34> lib\site-packages\pip install Django
'lib\site-packages\pip' is not recognized as an internal or external command,
operable program or batch file.
What could be causing this?
This is what I get when I type in echo %PATH%:
C:\Python34>echo %PATH%
C:\Program Files\ImageMagick-6.8.8-Q16;C:\Program Files (x86)\Intel\iCLS Client\
;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:\Windows\S
ystem32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\
Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Progr
am Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Mana
gement Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine C
omponents\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components
\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\P
rogram Files (x86)\nodejs\;C:\Program Files (x86)\Heroku\bin;C:\Program Files (x
86)\git\cmd;C:\RailsInstaller\Ruby2.0.0\bin;C:\RailsInstaller\Git\cmd;C:\RailsIn
staller\Ruby1.9.3\bin;C:\Users\Javi\AppData\Roaming\npm

You need to add the path of your pip installation to your PATH system variable. By default, pip is installed to C:\Python34\Scripts\pip (pip now comes bundled with new versions of python), so the path "C:\Python34\Scripts" needs to be added to your PATH variable.
To check if it is already in your PATH variable, type echo %PATH% at the CMD prompt
To add the path of your pip installation to your PATH variable, you can use the Control Panel or the setx command. For example:
setx PATH "%PATH%;C:\Python34\Scripts"
Note:
According to the official documentation, "[v]ariables set with setx variables are available in future command windows only, not in the current command window". In particular, you will need to start a new cmd.exe instance after entering the above command in order to utilize the new environment variable.
Thanks to Scott Bartell for pointing this out.

For Windows, when you install a package, you type:
python -m pip install [packagename]

As of now, version 3.7.3 I had a little bit of an issue with getting the right system variable.
Try this:
Type start %appdata% in cmd.
After that file explorer should pop up in ../AppData/Roaming.
Go back one directory and navigate to Local/Programs/Python/Python37-32/Scripts.
NOTE: The version number may be different so if you copy and paste the above file path it could not work.
After you do this you now have the correct location of your downloaded Python. Copy your file path by selecting the whole directory in the address bar.
Once you do that click the start icon and navigate to the Control Panel → System and Security → System. Then click "Advanced System Settings" on the left side of the panel.
Once there, click Environment Variables on the bottom right and there will be two boxes, an upper and a lower box. In the upper box: Click on the 'Path' Variable and click Edit located on the right. Click New and paste your directory Path. It should look something like this:
Click OK three times, open a new window of cmd and type: pip. See if it works.

For me the command:
set PATH=%PATH%;C:\Python34\Scripts
worked immediately (try after echo %PATH% and you will see that your path has the value C:\Python34\Scripts).
Thanks to: Adding a directory to the PATH environment variable in Windows

Alternate way.
If you don't want to add the PATH as the previous well written answers pointed out,
but you want to execute pip as your command then you can do that with py -m as prefix.
Given that you have to do it again and again.
eg.
py -m <command>
as in
py -m pip install --upgrade pip setuptools
Also make sure to have pip and py installed

The only way that worked on my Windows 10 machine was as follows:
py -3 -m pip install xxxxx

Also, the long method - it was a last resort after trying all previous answers:
C:\python27\scripts\pip.exe install [package].whl
This after cd in directory where the wheel is located.

As per Python 3.6 Documentation
It is possible that pip does not get installed by default. One
potential fix is:
python -m ensurepip --default-pip

Control Panel -> add/remove programs -> Python -> Modify -> optional Features (you can click everything) then press next -> Check "Add python to environment variables" -> Install
And that should solve your path issues, so jump to command prompt and you can use pip now.

Go to control Panel >> Uninstall or change Program and double click on Python XXX to modify install. Make sure PIP component is checked and install.

I was having the same problem just now.
After adding the proper folder (C:\Python33\Scripts) to the path, I still could not get pip to run. All it took was running
pip.exe install -package- instead of
pip install -package-.

Try going to Windows PowerShell or cmd prompt and typing:
python -m pip install openpyxl

In latest version Python 3.6.2 and above, is available in
C:\Program Files (x86)\Python36-32\Scripts
You can add the path to our environment variable path as below
Make sure you close your command prompt or Git after setting up your path. Also should you open your command prompt in administrator mode. This is example for Windows 10.

Use
set Path = `%PATH%;C:\Python34\;C:\Python27\Scripts`
Source

Or if you are using PyCharm (2017-03-03) like me, just change directory in terminal and install:
cd C:\Users\{user}\PycharmProjects\test\venv\Scripts
pip install ..

Most frequently it is:
in cmd.exe write
python -m pip install --user [name of your module here without brackets]

Even I'm new to this, but pip install django worked for me.
The path should be set as where the script folder of the Python installation is, i.e.C:\Python34\Scripts.
I suppose it's because Django is a framework which is based on Python, and that's why this directory structure has to be maintained while installing.

I have just installed Python 3.6.2.
I got the path as
C:\Users\USERNAME\AppData\Local\Programs\Python\Python36-32\Scripts

In Windows, open cmd and find the location of PYTHON_HOME using where python. Now add this location to your environment variable PATH using:
set PATH=%PATH%;<PYTHON_HOME>\Scripts
Or refer to this.
In Linux, open a terminal and find the location of PYTHON_HOME using which python. Now add the PYTHON_HOME/Scripts to the PATH variable using:
PATH=$PATH:<PYTHON_HOME>\Scripts
export PATH

You can try pip3. Something like:
pip3 install pandas

I was facing the same issue. Run Windows PowerShell as Administrator. It resolved my issue.

None of these actually worked for me, but running
python -m pip install -U pip
and then adding the specified directory to the PATH as suggested got it working

In your Python folder path in Terminal, just type
py -m pip
in order to check the current version of your pip.
You will also see a list of commands, you can use...

I think from Python 2.7.9 and higher pip comes pre installed and it will be in your scripts folder.
So you have to add the "scripts" folder to the path. Mine is installed in C:\Python27\Scripts. Check yours to see what your path is so that you can alter the below accordingly. Then go to PowerShell, paste the below code in PowerShell and hit Enter key. After that, reboot and your issue will be resolved.
[Environment]::SetEnvironmentVariable("Path", "$env:Path;C:\Python27\Scripts", "User")

In a Windows environment, just execute the below commands in a DOS shell.
path=%path%;D:\Program Files\python3.6.4\Scripts;
(new path=current path;path of the Python script folder)

I deleted the older version using the control panel and then installed the new version however the newer version was not reflecting pip even after adding the right paths in the environment variables. However, the thing that worked for me was deleting the folders of old python that were there in the local App folder even after uninstall. For me, the path was like below. Deleting this folder solved my issue
C:\Users\username\AppData\Local\Programs\Python38

'pip' is not recognized as an internal or external command
pip is a python module used to install packages. For your problem, there can be many reasons;
Restart CMD/Terminal
Environment variable is not set. pip is installed but environment variable is not set. Environment variable is a windows variable where pip path is saved, so it can be run at run time.
pip is not installed.
Restart CMD/Terminal
It is sometimes possible that you opened your command prompt or terminal before installing pip and now it just needs a restart to pick up the latest environment variables. It is worth trying just restarting your command prompt or terminal.
Environment Variable is Not Set
Open CMD and run this command to see the values set in the PATH environment variable.
echo %PATH%
This will echo the PATH environment variable like this;
You should check if your path exist in the echoed PATH list. For example, in my case, the path for pip.exe files is C:\Python310\Scripts. You can check this path yourself like this;
If you can find pip path and it does not exist the echoed PATH variable, then we need to add it. Copy the path like C:\Python310\Scripts.
Go to Start > This PC > Properties > Advance system settings >
Advanced > Environment Variables
As shown in the image above, Select Path, click Edit button and add the copied path. Restart the CMD and test pip command again.
pip is Not Installed
If pip is not installed, you can install it again by downloading latest python.exe setup from python.org website. Make sure you check mark the pip option as shown in the image below.
In the next step, check mark "Add Python to environment variables"

I had this same issue. You just need to go to your
C:\Python27\Scripts
and add it to environment variables. After path setting just run pip.exe file on C:\Python27\Scripts and then try pip in cmd. But if nothing happens try running all pip applications like pip2.7 and pip2.exe. And pip will work like a charm.

Small clarification: in "Windows 7 64 bit PC", after adding ...Python34\Scripts to the path variable, pip install pygame didn't work for me.
So I checked the "...Python34\Scripts" folder, it didn't have pip, but it had pip3 and pip3.4. So I ran pip3.4 install pygame .... .whl. It worked.
(Further open a command window in the same folder where you have the downloaded pygame...whl file.)

When installing SQL 2019 Python, there are known issues for PIP which require a fix (step 7)
https://learn.microsoft.com/en-us/sql/advanced-analytics/known-issues-for-sql-server-machine-learning-services?view=sql-server-ver15
pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Workaround
Copy the following files:
libssl-1_1-x64.dll
libcrypto-1_1-x64.dll
from the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\Library\bin
to the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\DLLs
Then open a new DOS command shell prompt.

Having trouple with Pip [duplicate]

I'm running into a weird error when trying to install Django on my computer.
This is the sequence that I typed into my command line:
C:\Python34> python get-pip.py
Requirement already up-to-date: pip in c:\python34\lib\site-packages
Cleaning up...
C:\Python34> pip install Django
'pip' is not recognized as an internal or external command,
operable program or batch file.
C:\Python34> lib\site-packages\pip install Django
'lib\site-packages\pip' is not recognized as an internal or external command,
operable program or batch file.
What could be causing this?
This is what I get when I type in echo %PATH%:
C:\Python34>echo %PATH%
C:\Program Files\ImageMagick-6.8.8-Q16;C:\Program Files (x86)\Intel\iCLS Client\
;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:\Windows\S
ystem32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\
Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Progr
am Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Mana
gement Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine C
omponents\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components
\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\P
rogram Files (x86)\nodejs\;C:\Program Files (x86)\Heroku\bin;C:\Program Files (x
86)\git\cmd;C:\RailsInstaller\Ruby2.0.0\bin;C:\RailsInstaller\Git\cmd;C:\RailsIn
staller\Ruby1.9.3\bin;C:\Users\Javi\AppData\Roaming\npm

You need to add the path of your pip installation to your PATH system variable. By default, pip is installed to C:\Python34\Scripts\pip (pip now comes bundled with new versions of python), so the path "C:\Python34\Scripts" needs to be added to your PATH variable.
To check if it is already in your PATH variable, type echo %PATH% at the CMD prompt
To add the path of your pip installation to your PATH variable, you can use the Control Panel or the setx command. For example:
setx PATH "%PATH%;C:\Python34\Scripts"
Note:
According to the official documentation, "[v]ariables set with setx variables are available in future command windows only, not in the current command window". In particular, you will need to start a new cmd.exe instance after entering the above command in order to utilize the new environment variable.
Thanks to Scott Bartell for pointing this out.

For Windows, when you install a package, you type:
python -m pip install [packagename]

As of now, version 3.7.3 I had a little bit of an issue with getting the right system variable.
Try this:
Type start %appdata% in cmd.
After that file explorer should pop up in ../AppData/Roaming.
Go back one directory and navigate to Local/Programs/Python/Python37-32/Scripts.
NOTE: The version number may be different so if you copy and paste the above file path it could not work.
After you do this you now have the correct location of your downloaded Python. Copy your file path by selecting the whole directory in the address bar.
Once you do that click the start icon and navigate to the Control Panel → System and Security → System. Then click "Advanced System Settings" on the left side of the panel.
Once there, click Environment Variables on the bottom right and there will be two boxes, an upper and a lower box. In the upper box: Click on the 'Path' Variable and click Edit located on the right. Click New and paste your directory Path. It should look something like this:
Click OK three times, open a new window of cmd and type: pip. See if it works.

For me the command:
set PATH=%PATH%;C:\Python34\Scripts
worked immediately (try after echo %PATH% and you will see that your path has the value C:\Python34\Scripts).
Thanks to: Adding a directory to the PATH environment variable in Windows

Alternate way.
If you don't want to add the PATH as the previous well written answers pointed out,
but you want to execute pip as your command then you can do that with py -m as prefix.
Given that you have to do it again and again.
eg.
py -m <command>
as in
py -m pip install --upgrade pip setuptools
Also make sure to have pip and py installed

The only way that worked on my Windows 10 machine was as follows:
py -3 -m pip install xxxxx

Also, the long method - it was a last resort after trying all previous answers:
C:\python27\scripts\pip.exe install [package].whl
This after cd in directory where the wheel is located.

As per Python 3.6 Documentation
It is possible that pip does not get installed by default. One
potential fix is:
python -m ensurepip --default-pip

Control Panel -> add/remove programs -> Python -> Modify -> optional Features (you can click everything) then press next -> Check "Add python to environment variables" -> Install
And that should solve your path issues, so jump to command prompt and you can use pip now.

Go to control Panel >> Uninstall or change Program and double click on Python XXX to modify install. Make sure PIP component is checked and install.

I was having the same problem just now.
After adding the proper folder (C:\Python33\Scripts) to the path, I still could not get pip to run. All it took was running
pip.exe install -package- instead of
pip install -package-.

Try going to Windows PowerShell or cmd prompt and typing:
python -m pip install openpyxl

In latest version Python 3.6.2 and above, is available in
C:\Program Files (x86)\Python36-32\Scripts
You can add the path to our environment variable path as below
Make sure you close your command prompt or Git after setting up your path. Also should you open your command prompt in administrator mode. This is example for Windows 10.

Use
set Path = `%PATH%;C:\Python34\;C:\Python27\Scripts`
Source

Or if you are using PyCharm (2017-03-03) like me, just change directory in terminal and install:
cd C:\Users\{user}\PycharmProjects\test\venv\Scripts
pip install ..

Most frequently it is:
in cmd.exe write
python -m pip install --user [name of your module here without brackets]

Even I'm new to this, but pip install django worked for me.
The path should be set as where the script folder of the Python installation is, i.e.C:\Python34\Scripts.
I suppose it's because Django is a framework which is based on Python, and that's why this directory structure has to be maintained while installing.

I have just installed Python 3.6.2.
I got the path as
C:\Users\USERNAME\AppData\Local\Programs\Python\Python36-32\Scripts

In Windows, open cmd and find the location of PYTHON_HOME using where python. Now add this location to your environment variable PATH using:
set PATH=%PATH%;<PYTHON_HOME>\Scripts
Or refer to this.
In Linux, open a terminal and find the location of PYTHON_HOME using which python. Now add the PYTHON_HOME/Scripts to the PATH variable using:
PATH=$PATH:<PYTHON_HOME>\Scripts
export PATH

You can try pip3. Something like:
pip3 install pandas

I was facing the same issue. Run Windows PowerShell as Administrator. It resolved my issue.

None of these actually worked for me, but running
python -m pip install -U pip
and then adding the specified directory to the PATH as suggested got it working

In your Python folder path in Terminal, just type
py -m pip
in order to check the current version of your pip.
You will also see a list of commands, you can use...

I think from Python 2.7.9 and higher pip comes pre installed and it will be in your scripts folder.
So you have to add the "scripts" folder to the path. Mine is installed in C:\Python27\Scripts. Check yours to see what your path is so that you can alter the below accordingly. Then go to PowerShell, paste the below code in PowerShell and hit Enter key. After that, reboot and your issue will be resolved.
[Environment]::SetEnvironmentVariable("Path", "$env:Path;C:\Python27\Scripts", "User")

In a Windows environment, just execute the below commands in a DOS shell.
path=%path%;D:\Program Files\python3.6.4\Scripts;
(new path=current path;path of the Python script folder)

I deleted the older version using the control panel and then installed the new version however the newer version was not reflecting pip even after adding the right paths in the environment variables. However, the thing that worked for me was deleting the folders of old python that were there in the local App folder even after uninstall. For me, the path was like below. Deleting this folder solved my issue
C:\Users\username\AppData\Local\Programs\Python38

'pip' is not recognized as an internal or external command
pip is a python module used to install packages. For your problem, there can be many reasons;
Restart CMD/Terminal
Environment variable is not set. pip is installed but environment variable is not set. Environment variable is a windows variable where pip path is saved, so it can be run at run time.
pip is not installed.
Restart CMD/Terminal
It is sometimes possible that you opened your command prompt or terminal before installing pip and now it just needs a restart to pick up the latest environment variables. It is worth trying just restarting your command prompt or terminal.
Environment Variable is Not Set
Open CMD and run this command to see the values set in the PATH environment variable.
echo %PATH%
This will echo the PATH environment variable like this;
You should check if your path exist in the echoed PATH list. For example, in my case, the path for pip.exe files is C:\Python310\Scripts. You can check this path yourself like this;
If you can find pip path and it does not exist the echoed PATH variable, then we need to add it. Copy the path like C:\Python310\Scripts.
Go to Start > This PC > Properties > Advance system settings >
Advanced > Environment Variables
As shown in the image above, Select Path, click Edit button and add the copied path. Restart the CMD and test pip command again.
pip is Not Installed
If pip is not installed, you can install it again by downloading latest python.exe setup from python.org website. Make sure you check mark the pip option as shown in the image below.
In the next step, check mark "Add Python to environment variables"

I had this same issue. You just need to go to your
C:\Python27\Scripts
and add it to environment variables. After path setting just run pip.exe file on C:\Python27\Scripts and then try pip in cmd. But if nothing happens try running all pip applications like pip2.7 and pip2.exe. And pip will work like a charm.

Small clarification: in "Windows 7 64 bit PC", after adding ...Python34\Scripts to the path variable, pip install pygame didn't work for me.
So I checked the "...Python34\Scripts" folder, it didn't have pip, but it had pip3 and pip3.4. So I ran pip3.4 install pygame .... .whl. It worked.
(Further open a command window in the same folder where you have the downloaded pygame...whl file.)

When installing SQL 2019 Python, there are known issues for PIP which require a fix (step 7)
https://learn.microsoft.com/en-us/sql/advanced-analytics/known-issues-for-sql-server-machine-learning-services?view=sql-server-ver15
pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Workaround
Copy the following files:
libssl-1_1-x64.dll
libcrypto-1_1-x64.dll
from the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\Library\bin
to the folder
C:\Program Files\Microsoft SQL Server\MSSSQL15.MSSQLSERVER\PYTHON_SERVICES\DLLs
Then open a new DOS command shell prompt.

python 3.4.3 64bit a program required for this install could not be run

Trying to install Python 3.4.3 64-Bit and it gives me the following error:
'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support or package vendor'
I have no bloody idea what this means so please help. Thanks in advance
I'm the admin on my computer and have all permissions
My windows is 64bit and is Windows 8.1

I had the same phenomenon occur when trying to clean up (uninstall various versions of Python and perform a clean install of 3.4.3) on my Windows 7 64-bit laptop. Unfortunately, I cannot tell you what "program required for this install to complete could not be run". Repeated attempts to "install for all users" produced the same "could not be run" (followed by a roll back of the install). Just before getting out Orca and diving into the innards of the MSI file, I attempted an "install just for me", and the install completed. I am, in fact, the only (human) user of this computer. There is another user account that was created during a cygwin setup, and access to some aspect of that user's profile/resources may have been the issue. If you are installing Python for your own use - and not as a "platform-wide" resource for other users as well - you might try installing "just for me".

For me the problem was that I had an older version of Python installed, that the MSI could not un-install. I had to manually remove it first.
This is how I resolved the problem on my Windows7 machine...
Open a command prompt and navigate to the location of the python.exe. (For me this was C:\Python34.)
Execute this command
python3 -B -m ensurepip._uninstall
Close the command prompt.
Using the python MSI file for the version of Python I had previously installed (yes, I went to the Python archive and downloaded the MSI for the old version), install Python again, but without the "pip" package. (Not sure if this is necessary, but it worked for me.)
Using the same Python MSI file, uninstall Python completely.
Using another MSI, for the version of Python you wish to install, you should now be able to perform a "clean" install.

I got the same error while uninstalling the python file from the control panel. It prompts
There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support or package vendor
I have solved this problem by installing the specific python-<version>.amd64.msi.
I then executed the MSI file. It asks for Change, repair, remove. First, click on Change radio button and complete execution. Later you can come to control panel and repair or uninstall the python file.

I had the same symptoms as OP. In my case, i had two separate installs, one of 2.7 and one of 3.4.3 and when i checked the PATH variable, there were 2 lines about PYTHONPATH pointing to the 2.7 version.
I removed the lines and then the repair funciton of the MSI did work. I uninstalled both versions and proceeded to reinstall.
Done :)
On a Win7 box:
Startup/ right click on Computer / Properties / Advanced system settings / Environment variables then check both sub-windows for paths related to python.

I had just the exact problem. But in mine case i've additionally removed the c:\python27 and c:\python36 directories and associated installers got stuck around Install/Uninstall and could not completely repair the installation (the /Scripts subdirectory has been missed and the python.exe reported an error about missed encodings module).
But i've found a solution for myself. Seems somehow the PYTHONHOME and PYTHONPATH environment variables (and may be PATH too) has been interfering with the Python installation process. But because i could not run Uninstall from the Windows Uninstall list in the Control Panel, then i did this:
Cleanup the PATH environment variable from all python path occurrences.
Remove PYTHONHOME and PYTHONPATH environment variables.
Restart Windows Explorer if environment variables (console command set PY must return the empty list) is not updated.
Run repair from (!) the python-3.4.4*.exe/python-2.7.11*.exe executables (download it if not done yet). Icons in the Windows Uninstall list in the Control Panel will reset into the original state for a repaired python installation.
Run the Uninstall from the same executables or from Windows Uninstall list in the Control Panel.
And it did the trick!
If you still needs the both versions of the python installation, then try install the older versions before the new versions. Seems it's important too.

Poking around, there is a temp file saying:
Error 1721. There is a problem with this Windows Installer package. A
program required for this install to complete could not be run.
Contact your support personnel or package vendor. Action: UpdatePip,
location: C:\Programs\PY272\python.exe, command: -m ensurepip -U
--default-pip
=== Logging stopped: 6/12/2015 13:26:17 ===
OK, so the missing "Voldemort" file (that which shall not be mentioned) is the ensurepip package. There is documentation for ensurepip at https://docs.python.org/2/library/ensurepip.html. I am still on 2.7, but it looks like this is a shared problem with Py 3.
The documentation says the ensurepip package is new in 2.7.9. My solution: install a version prior to 2.7.9 and then upgrade the files myself from an existing install. Done.

Categories