Related
I'm on Windows 8, using Anaconda 1.7.5 64bit.
I created a new Anaconda environment with
conda create -p ./test python=2.7 pip
from C:\Pr\TEMP\venv\.
This worked well (there is a folder with a new python distribution). conda tells me to type
activate C:\PR\TEMP\venv\test
to activate the environment, however this returns:
No environment named "C:\PR\temp\venv\test" exists in C:\PR\Anaconda\envs
How can I activate the environment? What am I doing wrong?
If this happens you would need to set the PATH for your environment (so that it gets the right Python from the environment and Scripts\ on Windows).
Imagine you have created an environment called py33 by using:
conda create -n py33 python=3.3 anaconda
Here the folders are created by default in Anaconda\envs, so you need to set the PATH as:
set PATH=C:\Anaconda\envs\py33\Scripts;C:\Anaconda\envs\py33;%PATH%
Now it should work in the command window:
activate py33
The line above is the Windows equivalent to the code that normally appears in the tutorials for Mac and Linux:
$ source activate py33
More info:
https://groups.google.com/a/continuum.io/forum/#!topic/anaconda/8T8i11gO39U
Does `anaconda` create a separate PYTHONPATH variable for each new environment?
Use cmd instead of Powershell!
I spent 2 hours before I switched to cmd and then it worked!
create Environment:
conda create -n your_environment_name
see list of conda environments:
conda env list
activate your environment:
conda activate your_environment_name
That's all folks
Note that the command for activating an environment has changed in Conda version 4.4. The recommended way of activating an environment is now conda activate myenv instead of source activate myenv. To enable the new syntax, you should modify your .bashrc file. The line that currently reads something like
export PATH="<path_to_your_conda_install>/bin:$PATH"
Should be changed to
. <path_to_your_conda_install>/etc/profile.d/conda.sh
This only adds the conda command to the path, but does not yet activate the base environment (which was previously called root). To do also that, add another line
conda activate base
after the first command. See all the details in Anaconda's blog post from December 2017. (I think that this page is currently missing a newline between the two lines, it says .../conda.shconda activate base).
(This answer is valid for Linux, but it might be relevant for Windows and Mac as well)
All the former answers seem to be outdated.
conda activate was introduced in conda 4.4 and 4.6.
conda activate: The logic and mechanisms underlying environment activation have been reworked. With conda 4.4, conda activate and conda deactivate are now the preferred commands for activating and deactivating environments. You’ll find they are much more snappy than the source activate and source deactivate commands from previous conda versions. The conda activate command also has advantages of (1) being universal across all OSes, shells, and platforms, and (2) not having path collisions with scripts from other packages like python virtualenv’s activate script.
Examples
conda create -n venv-name python=3.6
conda activate -n venv-name
conda deactivate
These new sub-commands are available in "Aanconda Prompt" and "Anaconda Powershell Prompt" automatically. To use conda activate in every shell (normal cmd.exe and powershell), check expose conda command in every shell on Windows.
References
How to Get Ready for the Release of conda 4.4
Conda 4.6 Release
As you can see from the error message the paths, that you specified, are wrong. Try it like this:
activate ..\..\temp\venv\test
However, when I needed to install Anaconda, I downloaded it from here and installed it to the default paths (C:\Anaconda), than I put this path to the environment variables, so now Anacondas interpreter is used as default. If you are using PyCharm, for example, you can specify the interpreter there directly.
I've tried to activate env from Jenkins job (in bash) with
conda activate base and it failed, so after many tries, this one worked for me (CentOS 7) :
source /opt/anaconda2/bin/activate base
Below is how it worked for me
C:\Windows\system32>set CONDA_ENVS_PATH=d:\your\location
C:\Windows\system32>conda info
Shows new environment path
C:\Windows\system32>conda create -n YourNewEnvironment --clone=root
Clones default root environment
C:\Windows\system32>activate YourNewEnvironment
Deactivating environment "d:\YourDefaultAnaconda3"...
Activating environment "d:\your\location\YourNewEnvironment"...
[YourNewEnvironment] C:\Windows\system32>conda info -e
conda environments:
#
YourNewEnvironment
* d:\your\location\YourNewEnvironment
root d:\YourDefaultAnaconda3
Though #Simba had a good answer at the time, a lot has changed in the conda env since 4.6. Conda activate (env-name) overthrew source activate (env-name) for good but not without it own challenges. conda activate oftentimes forces your environment to base and makes you see something like this:
and throwing loads of error back at you. This can also be because auto_activate_base is set to True.
You can check this by using the following command
conda config --set auto_activate_base False
source ~/.bashrc
And to reactivate use this
conda config --set auto_activate_base True
source ~/.bashrc
let's assume your environment name is 'demo' and you are using anaconda and want to create a virtual environment:
(if you want python3)
conda create -n demo python=3
(if you want python2)
conda create -n demo python=2
After running above command you have to activate the environment by bellow command:
source activate demo
For me, using Anaconda Prompt instead of cmd or PowerShell is the key.
In Anaconda Prompt, all I need to do is activate XXX
I was having the same, a fix seems to have been made in the source.
One special case: If you are trying to put the activation command in a unix script, you might run into a problem because when you run the bash script, a new (linux) shell environment is created, and then destroyed when you exit that script. Think of this as running bash, then source activate... / conda activate..., then running exit to exit that shell... The result is you end up without an activated shell... More details in How to execute script in the current shell on Linux?:
TL;DR: for linux, to activate in a bash script and leave active:
Add the line #!/bin/bash as the first line of the script (This is anyways always a good practice, it specifies this is a bash script)
Type the command source shell_script.sh or . shell_script.sh
Note: . in bash is equivalent to source in bash.
I'm using conda with Windows 10.
Anaconda was installed in:
C:\User\Admin\Anaconda3
After installation I've added this folders to system PATH:
C:\User\Admin\Anaconda3
C:\User\Admin\Anaconda3\Scripts
Then I ran "Anaconda promt" from windows start menu. From this anaconda promt I created my environment with
conda create --name my_env
And after that, I'm able to activate my conda environment from regular CMD by just typing:
activate my_env
For me running this works in VS Code:
C:/ProgramData/Anaconda3/Scripts/activate
Or just creating a new Terminal.
Window:
conda activate environment_name
Mac: conda activate environment_name
I'm on Windows 8, using Anaconda 1.7.5 64bit.
I created a new Anaconda environment with
conda create -p ./test python=2.7 pip
from C:\Pr\TEMP\venv\.
This worked well (there is a folder with a new python distribution). conda tells me to type
activate C:\PR\TEMP\venv\test
to activate the environment, however this returns:
No environment named "C:\PR\temp\venv\test" exists in C:\PR\Anaconda\envs
How can I activate the environment? What am I doing wrong?
If this happens you would need to set the PATH for your environment (so that it gets the right Python from the environment and Scripts\ on Windows).
Imagine you have created an environment called py33 by using:
conda create -n py33 python=3.3 anaconda
Here the folders are created by default in Anaconda\envs, so you need to set the PATH as:
set PATH=C:\Anaconda\envs\py33\Scripts;C:\Anaconda\envs\py33;%PATH%
Now it should work in the command window:
activate py33
The line above is the Windows equivalent to the code that normally appears in the tutorials for Mac and Linux:
$ source activate py33
More info:
https://groups.google.com/a/continuum.io/forum/#!topic/anaconda/8T8i11gO39U
Does `anaconda` create a separate PYTHONPATH variable for each new environment?
Use cmd instead of Powershell!
I spent 2 hours before I switched to cmd and then it worked!
create Environment:
conda create -n your_environment_name
see list of conda environments:
conda env list
activate your environment:
conda activate your_environment_name
That's all folks
Note that the command for activating an environment has changed in Conda version 4.4. The recommended way of activating an environment is now conda activate myenv instead of source activate myenv. To enable the new syntax, you should modify your .bashrc file. The line that currently reads something like
export PATH="<path_to_your_conda_install>/bin:$PATH"
Should be changed to
. <path_to_your_conda_install>/etc/profile.d/conda.sh
This only adds the conda command to the path, but does not yet activate the base environment (which was previously called root). To do also that, add another line
conda activate base
after the first command. See all the details in Anaconda's blog post from December 2017. (I think that this page is currently missing a newline between the two lines, it says .../conda.shconda activate base).
(This answer is valid for Linux, but it might be relevant for Windows and Mac as well)
All the former answers seem to be outdated.
conda activate was introduced in conda 4.4 and 4.6.
conda activate: The logic and mechanisms underlying environment activation have been reworked. With conda 4.4, conda activate and conda deactivate are now the preferred commands for activating and deactivating environments. You’ll find they are much more snappy than the source activate and source deactivate commands from previous conda versions. The conda activate command also has advantages of (1) being universal across all OSes, shells, and platforms, and (2) not having path collisions with scripts from other packages like python virtualenv’s activate script.
Examples
conda create -n venv-name python=3.6
conda activate -n venv-name
conda deactivate
These new sub-commands are available in "Aanconda Prompt" and "Anaconda Powershell Prompt" automatically. To use conda activate in every shell (normal cmd.exe and powershell), check expose conda command in every shell on Windows.
References
How to Get Ready for the Release of conda 4.4
Conda 4.6 Release
As you can see from the error message the paths, that you specified, are wrong. Try it like this:
activate ..\..\temp\venv\test
However, when I needed to install Anaconda, I downloaded it from here and installed it to the default paths (C:\Anaconda), than I put this path to the environment variables, so now Anacondas interpreter is used as default. If you are using PyCharm, for example, you can specify the interpreter there directly.
I've tried to activate env from Jenkins job (in bash) with
conda activate base and it failed, so after many tries, this one worked for me (CentOS 7) :
source /opt/anaconda2/bin/activate base
Below is how it worked for me
C:\Windows\system32>set CONDA_ENVS_PATH=d:\your\location
C:\Windows\system32>conda info
Shows new environment path
C:\Windows\system32>conda create -n YourNewEnvironment --clone=root
Clones default root environment
C:\Windows\system32>activate YourNewEnvironment
Deactivating environment "d:\YourDefaultAnaconda3"...
Activating environment "d:\your\location\YourNewEnvironment"...
[YourNewEnvironment] C:\Windows\system32>conda info -e
conda environments:
#
YourNewEnvironment
* d:\your\location\YourNewEnvironment
root d:\YourDefaultAnaconda3
Though #Simba had a good answer at the time, a lot has changed in the conda env since 4.6. Conda activate (env-name) overthrew source activate (env-name) for good but not without it own challenges. conda activate oftentimes forces your environment to base and makes you see something like this:
and throwing loads of error back at you. This can also be because auto_activate_base is set to True.
You can check this by using the following command
conda config --set auto_activate_base False
source ~/.bashrc
And to reactivate use this
conda config --set auto_activate_base True
source ~/.bashrc
let's assume your environment name is 'demo' and you are using anaconda and want to create a virtual environment:
(if you want python3)
conda create -n demo python=3
(if you want python2)
conda create -n demo python=2
After running above command you have to activate the environment by bellow command:
source activate demo
For me, using Anaconda Prompt instead of cmd or PowerShell is the key.
In Anaconda Prompt, all I need to do is activate XXX
I was having the same, a fix seems to have been made in the source.
One special case: If you are trying to put the activation command in a unix script, you might run into a problem because when you run the bash script, a new (linux) shell environment is created, and then destroyed when you exit that script. Think of this as running bash, then source activate... / conda activate..., then running exit to exit that shell... The result is you end up without an activated shell... More details in How to execute script in the current shell on Linux?:
TL;DR: for linux, to activate in a bash script and leave active:
Add the line #!/bin/bash as the first line of the script (This is anyways always a good practice, it specifies this is a bash script)
Type the command source shell_script.sh or . shell_script.sh
Note: . in bash is equivalent to source in bash.
I'm using conda with Windows 10.
Anaconda was installed in:
C:\User\Admin\Anaconda3
After installation I've added this folders to system PATH:
C:\User\Admin\Anaconda3
C:\User\Admin\Anaconda3\Scripts
Then I ran "Anaconda promt" from windows start menu. From this anaconda promt I created my environment with
conda create --name my_env
And after that, I'm able to activate my conda environment from regular CMD by just typing:
activate my_env
For me running this works in VS Code:
C:/ProgramData/Anaconda3/Scripts/activate
Or just creating a new Terminal.
Window:
conda activate environment_name
Mac: conda activate environment_name
I create a virtual environment with conda
$ conda create test_env numpy .....
It gets created successfully.
$ conda env list
# conda environments:
#
base * /home/myname/anaconda3
my_project_env /home/myname/anaconda3/envs/my_project_env
test_env /home/myname/anaconda3/envs/test_env
but I can not activate it
$ source activate my_project_env
returns - activate: No such file or directory
The only place I find activate is within the whole anaconda3 is in /common folder
source anaconda3/envs/my_project_env/lib/python3.6/venv/scripts/common/activate my_project_env
When I run it with this path I get VENV_PROMPT "kind of environment" but when I check libraries with pip list it returns a global list of installed libraries instead of the selected few.
$ source anaconda3/envs/my_project_env/lib/python3.6/venv/scripts/common/activate my_project_env
__VENV_PROMPT__myname#box:~$ pip3 list
I met with the same problem. It is because I have changed the system's $PATH variable from anaconda's main bin directory to the environment's bin directory. Actually, the activate's path is under /home/users/anaconda3/bin/. So I just use the following command to make a link between the two bin directories:
ln -s /home/userName/anaconda3/bin/activate /home/userName/anaconda3/envs/envName/bin/activate
ln -s /home/userName/anaconda3/bin/deactivate /home/userName/anaconda3/envs/envName/bin/deactivate
Try to use this command activate your conda environment:
source activate /home/myname/anaconda3/envs/my_project_env
Recommended command to create environment with python version 2.7 :
conda create -n my_project_env python=2.7
Check your conda version
conda -V
Create virtual environment for your project
conda create -n yourenvname python=x.x anaconda
To activate your virtual environment
source activate yourenvname
As others have mentioned, it may be a PATH issue. However, if you're still able to run other conda commands then you may need to either conda update conda or delete conda and reinstall. In my case, I was running miniconda which I believe simply did not contain the activate binary.
Running conda activate instead of source activate solved my issues.
Usually, we activate a conda environment with the command:
source activate env_name
Is it possible to activate conda environment with its full path? For example:
source (fullpath)/bin/activate
When I do this it activates the default environment of anaconda i.e the root environment.
Update for conda 4.4 and up:
You need to specify the conda environment path to activate. The new conda activate command should not need the full path to an "activate script" any longer, since the command is now "built-in" to conda. So something like:
conda activate (fullpath)/env-name-here
should work.
The command you have specified activates the root environment because you have not given conda an environment to activate, and root is the default. If you want to activate a particular environment, you can certainly do so with the full path to the activate script, for instance
source (full path to main Anaconda directory)/bin/activate (fullpath)/env-name-here
^^^^^^^^^^^^^^^^^^^^^^^^
You're missing this part
You can activate an environment that is not in your conda environment list by passing the path to the environment. For example you can create an environment in any directory you want with the -p argument. Like so:
conda create -p /path/to/some/location/mytestenv/ python=3.5
This will NOT show up in conda env list, but you can activate it with:
source activate /path/to/some/location/mytestenv
yes, it does activates the default environment of anaconda.
you can see the list of created or available environments by :
conda env list
don't understand, what was the answer you were looking for ?
Sure, this is a old question but writing the answer for folks returning to this page. When you create a conda environment with the prefix, you'll not be allowed to give it a name. Please follow the below steps so that you'll have name for your conda environment and can activate it directly by using the name rather than the full path.
Navigate to the custom folder where you want to create the new environment.
D:\condaEnvs>conda create --prefix=FastAI --> This creates a conda environment named FastAI
D:\condaEnvs> conda config --append envs_dirs ‘D:\condaEnvs\FastAIEnv’ --> This will give a name to your newly created conda environment.
With the new versions of conda, we dont have this issue anymore.
I'm on Windows 8, using Anaconda 1.7.5 64bit.
I created a new Anaconda environment with
conda create -p ./test python=2.7 pip
from C:\Pr\TEMP\venv\.
This worked well (there is a folder with a new python distribution). conda tells me to type
activate C:\PR\TEMP\venv\test
to activate the environment, however this returns:
No environment named "C:\PR\temp\venv\test" exists in C:\PR\Anaconda\envs
How can I activate the environment? What am I doing wrong?
If this happens you would need to set the PATH for your environment (so that it gets the right Python from the environment and Scripts\ on Windows).
Imagine you have created an environment called py33 by using:
conda create -n py33 python=3.3 anaconda
Here the folders are created by default in Anaconda\envs, so you need to set the PATH as:
set PATH=C:\Anaconda\envs\py33\Scripts;C:\Anaconda\envs\py33;%PATH%
Now it should work in the command window:
activate py33
The line above is the Windows equivalent to the code that normally appears in the tutorials for Mac and Linux:
$ source activate py33
More info:
https://groups.google.com/a/continuum.io/forum/#!topic/anaconda/8T8i11gO39U
Does `anaconda` create a separate PYTHONPATH variable for each new environment?
Use cmd instead of Powershell!
I spent 2 hours before I switched to cmd and then it worked!
create Environment:
conda create -n your_environment_name
see list of conda environments:
conda env list
activate your environment:
conda activate your_environment_name
That's all folks
Note that the command for activating an environment has changed in Conda version 4.4. The recommended way of activating an environment is now conda activate myenv instead of source activate myenv. To enable the new syntax, you should modify your .bashrc file. The line that currently reads something like
export PATH="<path_to_your_conda_install>/bin:$PATH"
Should be changed to
. <path_to_your_conda_install>/etc/profile.d/conda.sh
This only adds the conda command to the path, but does not yet activate the base environment (which was previously called root). To do also that, add another line
conda activate base
after the first command. See all the details in Anaconda's blog post from December 2017. (I think that this page is currently missing a newline between the two lines, it says .../conda.shconda activate base).
(This answer is valid for Linux, but it might be relevant for Windows and Mac as well)
All the former answers seem to be outdated.
conda activate was introduced in conda 4.4 and 4.6.
conda activate: The logic and mechanisms underlying environment activation have been reworked. With conda 4.4, conda activate and conda deactivate are now the preferred commands for activating and deactivating environments. You’ll find they are much more snappy than the source activate and source deactivate commands from previous conda versions. The conda activate command also has advantages of (1) being universal across all OSes, shells, and platforms, and (2) not having path collisions with scripts from other packages like python virtualenv’s activate script.
Examples
conda create -n venv-name python=3.6
conda activate -n venv-name
conda deactivate
These new sub-commands are available in "Aanconda Prompt" and "Anaconda Powershell Prompt" automatically. To use conda activate in every shell (normal cmd.exe and powershell), check expose conda command in every shell on Windows.
References
How to Get Ready for the Release of conda 4.4
Conda 4.6 Release
As you can see from the error message the paths, that you specified, are wrong. Try it like this:
activate ..\..\temp\venv\test
However, when I needed to install Anaconda, I downloaded it from here and installed it to the default paths (C:\Anaconda), than I put this path to the environment variables, so now Anacondas interpreter is used as default. If you are using PyCharm, for example, you can specify the interpreter there directly.
I've tried to activate env from Jenkins job (in bash) with
conda activate base and it failed, so after many tries, this one worked for me (CentOS 7) :
source /opt/anaconda2/bin/activate base
Below is how it worked for me
C:\Windows\system32>set CONDA_ENVS_PATH=d:\your\location
C:\Windows\system32>conda info
Shows new environment path
C:\Windows\system32>conda create -n YourNewEnvironment --clone=root
Clones default root environment
C:\Windows\system32>activate YourNewEnvironment
Deactivating environment "d:\YourDefaultAnaconda3"...
Activating environment "d:\your\location\YourNewEnvironment"...
[YourNewEnvironment] C:\Windows\system32>conda info -e
conda environments:
#
YourNewEnvironment
* d:\your\location\YourNewEnvironment
root d:\YourDefaultAnaconda3
Though #Simba had a good answer at the time, a lot has changed in the conda env since 4.6. Conda activate (env-name) overthrew source activate (env-name) for good but not without it own challenges. conda activate oftentimes forces your environment to base and makes you see something like this:
and throwing loads of error back at you. This can also be because auto_activate_base is set to True.
You can check this by using the following command
conda config --set auto_activate_base False
source ~/.bashrc
And to reactivate use this
conda config --set auto_activate_base True
source ~/.bashrc
let's assume your environment name is 'demo' and you are using anaconda and want to create a virtual environment:
(if you want python3)
conda create -n demo python=3
(if you want python2)
conda create -n demo python=2
After running above command you have to activate the environment by bellow command:
source activate demo
For me, using Anaconda Prompt instead of cmd or PowerShell is the key.
In Anaconda Prompt, all I need to do is activate XXX
I was having the same, a fix seems to have been made in the source.
One special case: If you are trying to put the activation command in a unix script, you might run into a problem because when you run the bash script, a new (linux) shell environment is created, and then destroyed when you exit that script. Think of this as running bash, then source activate... / conda activate..., then running exit to exit that shell... The result is you end up without an activated shell... More details in How to execute script in the current shell on Linux?:
TL;DR: for linux, to activate in a bash script and leave active:
Add the line #!/bin/bash as the first line of the script (This is anyways always a good practice, it specifies this is a bash script)
Type the command source shell_script.sh or . shell_script.sh
Note: . in bash is equivalent to source in bash.
I'm using conda with Windows 10.
Anaconda was installed in:
C:\User\Admin\Anaconda3
After installation I've added this folders to system PATH:
C:\User\Admin\Anaconda3
C:\User\Admin\Anaconda3\Scripts
Then I ran "Anaconda promt" from windows start menu. From this anaconda promt I created my environment with
conda create --name my_env
And after that, I'm able to activate my conda environment from regular CMD by just typing:
activate my_env
For me running this works in VS Code:
C:/ProgramData/Anaconda3/Scripts/activate
Or just creating a new Terminal.
Window:
conda activate environment_name
Mac: conda activate environment_name