I try to install the python package using the following command line in anacondaprompt:
(base) C:\Users\Lenovo>pip install -r D:\autoencoder\Website_by_python\requirements.txt
Then the error is shown as
Processing c:\tmp\build\80754af9\backports.functools_lru_cache_1618170165463\work
ERROR: Could not install packages due to an OSError: [Errno 2] No such file or directory: 'C:\\tmp\\build\\80754af9\\backports.functools_lru_cache_1618170165463\\work'
I don't really know how to deal with that error. Could you please tell me?
Could not install packages due to an OSError
is always related to administrator privileges or even worse the python version that visual studio installs by default i suggest you to
uninstall python
delete the python extension from vs code
delete the python version in the data folder you can access it by run %temp% and in the address bar click on app data from there look for python
finally reinstall python i suggest you directly to C: without any version numbers i.e c:/Python dont forget to click add variables to path then open visual studio again and let him install the python extension again
omg i just noticed you talk about anaconda nevertheless it should be exactly the same problem
Related
I tried to install tensorflow, but I got the following error:
My Command:
pip install tensorflow
The Error I got:
ERROR: Could not install packages due to an OSError:
[Errno 2] No such file or directory:
'C:\\Users\\sipha\\AppData\\Local\\Packages\\PythonSoftwareFoundation.Python.3.10_qbz5n2kfra8p0
\\LocalCache\\local-packages\\Python310\\site-packages\\tensorflow\\include
\\external\\com_github_grpc_grpc\\src\\core\\ext\\filters\\client_channel
\\lb_policy\\grpclb\\client_load_reporting_filter.h'
HINT: This error might have occurred since this system does not have
Windows Long Path support enabled. You can find information on how to
enable this at https://pip.pypa.io/warnings/enable-long-paths
anyone know how to make new envirenment?
install tensoCMDrflow on windows, worked with CMD.
have python version 3.10
It seems like Long Path is disabled on your PC.
Do the following to enable it, and then try to install Tensorflow.
Press the Windows key + R key.
Type regedit and press enter.
Navigate to the following location Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem in the registry editor(regedit), or you could just paste it in the search bar on top.
Find and right click on LongPathsEnabled
Set the DWORD value to 1 instead of zero and reboot your computer.
This will enable Long Path support. Then try to install Tensorflow again.
You could reference the following article if you need any help https://www.howtogeek.com/266621/how-to-make-windows-10-accept-file-paths-over-260-characters/.
try conda install instead of pip install if you have conda installed
conda install tensorflow==2.6.0
When trying to install Python's sklearn package on Windows 10 using pip I am given an EnvironmentError that tells me there is no such file or directory of a specific file:
ERROR: Could not install packages due to an EnvironmentError: [Errno
2] No such file or directory:
'C:\Users\Rik\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.8_qbz5n2kfra8p0\LocalCache\local-packages\Python38\site-packages\sklearn\datasets\tests\data\openml\292\api-v1-json-data-list-data_name-australian-limit-2-data_version-1-status-deactivated.json.gz'
I have tried reinstalling the following packages numerous times:
scikit-learn
scipy
sklearn
I have also tried downloading the github master folder for sklearn and pasting it into the directory where the installer expects the file to be, and even then when installing with pip it tells me the file is missing.
Furthermore I tried installing it via the github repository by downloading it and running
python setup.py install
But this results in weird Microsoft Visual Studio errors because apparently it is trying to run a test program or something, not sure.
Any suggestions to fix this problem?
You can find the solution here: https://scikit-learn.org/stable/install.html
The problem occurs because the default path size limit is reached in your case, you can change this with the following steps:
open regedit tool (using windows cmd)
access the 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem' key
change the 'LongPathsEnabled' value to 1
reinstall sklearn using the command 'pip install --exists-action=i scikit-learn'
I'm running python 3.6 via anaconda 3, using Visual Studio Code.
I followed instructions like these (Interactive Brokers API install) and downloaded the package to a local directory of mine say: c:\dev\pyib, so now the code is in c:\dev\pyib\IbPy-master
I open that directory in command line and run
python setup.py install
All runs ok.
But then my program, which is in c:\dev\pyib says Module not found. (In my case ibapi). The linter is also showing red.
There is no other python installed on this pc.
Where did the package install to? and how do I check that? What will I find where the package installed itself to that shows me its there?
Or do I have to use a trial-and-error with the linter and sys.path.append()? (I tried that with the directory where the files are downloaded to - to no avail)
I'm trying to set up the PYTHONPATH using the "env" in launch.json from Visual Studio Code, as shown in this unaccepted answer.
Current sys.path:
'c:\\dev\\pyIb',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\python36.zip',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\DLLs',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib\\site-
packages',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib\\site-packages\\Babel-2.5.0-py3.6.egg',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib\\site-packages\\win32',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib\\site-packages\\win32\\lib',
'C:\\Users\\user\\AppData\\Local\\Continuum\\anaconda3\\lib\\site-packages\\Pythonwin'
I deleted the ib directory and re-ran the install. The last line says: Writing C:\Users\user\AppData\Local\Continuum\anaconda3\Lib\site-packages\IbPy2-0.8.0-py3.6.egg-info So is the location of the egg-info the location of my undetected module? The actual folder in the site-packages is called ib.
Or could my problems be because of a difference in Lib vs. lib with the lowercase in the sys.path and the uppercase in the actual directory?
But the real question here is still: HOW DO I KNOW WHERE the package was installed what should I search for?
This answer is specific for anaconda3 Python and packages installed using python setup.py install (which is actually using distutils)
Take a look at anaconda3\Lib\site-packages you should see a directory for the package you installed.
The way to know for sure where your package is, is by doing a pip list then trying to pip uninstall and re-install again using the python setup.py install: Here are the detailed instructions:
When uninstalling, pip will tell you it cannot because it was done via distutils.
You'll get a message like this:
DEPRECATION: Uninstalling a distutils installed project (ibpy2) has been deprecated and will be removed in a future version.
This is due to the fact that uninstalling a distutils project will only partially uninstall the project.
You'll be prompted to continue anyway. If you choose No, then you can find the directory in
C:\Users\<yourusername>\AppData\Local\Continuum\anaconda3\Lib\site-packages
Thanks to Emanuel Mtali for pointing me in the right direction
Some more information:
The problem I had was due to a stupid mistake of mine. I was running setup of a different (but related) package not used anymore. IbPy2 instead of TwsAPI. I was supposed to run the setup.py of the package installed via the latest version of the MSI from IB, and NOT the IbPy2 package. :-(
I had python 2.7 before and then I installed python 3.4.The OS is windows 10
I have renamed
C:\python27\python.exe to python2.exe (when I run python2 --version it shows correct version)
and
C:\python34\python.exe to python3.exe (when I run python3 --version it shows correct version)
I have set the path variable manually and there is no space etc.
I was trying to create a virtual environment and assign python34 to this new environment.
I was going through this SO reference -- Using VirtualEnv with multiple Python versions on windows
prompt>> virtualenv -p c:\Python34\python3.exe casenv
But I got an error--
Fatal error in launcher: Unable to create process using '"'
Do I need to install virtualenv again for python34 or somewhere I need to set virtualenv path for each python installation.
Any help is highly welcomed.
In my case, i had installed python 3.6 and uninstalled python 2.7 when i got this error.
Completely deleting the C:\Python2.7 directory did the trick.
This error is usually caused because of python directory of different versions stored at same location.
i.e in my case I was using python 3.5.X for development and when I updated to 3.7.6 I got this error.
People on internet suggest that it is because of pip but main cause is 2 or more python directory.
The following steps should fix it:
Uninstall previous python version (or use virtual environment if you want to play with multiple python version)
Delete the python directory you are not using (as it causes confusion for terminal to understand which python path it should pick to execute the command)
and this should fix the error of
fatal error in launcher unable to create process using ' '
Pip version: 10.0.0
Python version: 3.6.5 64 bit
Operating system: Windows 7 Ultimate, Service Pack 1, 64-bit
Description:
After upgrading pip to the version 10.0.0 (from Pycharm, that is using pip as a package) any attempts to start updated pip cause an error:
Fatal error in launcher: Unable to create process using '""c:\program files\python 3.6\python.exe" "C:\Program Files\Python 3.6\Scripts\pip.EXE"'
Command python -m pip works as expected.
I found text "Fatal error in launcher" only in executables:
src\pip_vendor\distlib\t32.exe
src\pip_vendor\distlib\t64.exe
and in the pip.exe itself.
After
python -m pip uninstall pip
easy_install.exe pip
error disappeared.
It is interesting, that initially pip.exe had almost the same size as t64.exe, now it significantly shorter.
If someone came after installing a newer version like 3.X and uninstalled the older version, what you need to do is to delete the old version's folder from C Drive.
Clean Fix (Windows)
The fastest way to fix the issue you were facing is to uninstall and reinstall.
Why it happened?
You probably moved the directory where python was installed.
You probably have both environmental variables listed in Environmental Variables.
Things to consider
You can only use 1 active version of python at a time if you use the MSI installer.
If you downloaded the zip file of Python, you can have unlimited versions in your computer BUT you can only have 1 active version under Environmental Variables.
You can always use any version of Python explicitly by writing the direct path to the specific location of the version of Python.
My problem is not new and occurred to others with the same error (Unable to find vcvarsall.bat), while installing 'lxml'. I use Python 3.5 and windows 7. I tried to follow the recommended steps here but failed
I installed mingw32 to C:\programs\mingw\
Add mingw32's bin directory to your environment variable: append
c:\programs\MinGW\bin; to the PATH
I went wrong here. May you explain me (simply) how to add mingw32's bin directory to the path?
Edit (create if not existing) distutils.cfg file located at C:\Python35\Lib\distutils\distutils.cfg to be:
[build]
compiler=mingw32
I didn't get this step at all.
Now run pip install lxml.
I got this one and I made sure the environment was set by opening a new cmd.exe.
Any advice to complete these steps would be greatly appreciated.
I think installing mingw32 is not a good idea.
Please follow these setps:
check your Python's versions, 3.4 will be easy to install;
download the whl and use pip install command;
go to http://www.lfd.uci.edu/~gohlke/pythonlibs/ where you'll find the file as your wish.
I should install Microsoft Visual C++ Compiler for Python 2.7 from ...
https://www.microsoft.com/en-us/download/confirmation.aspx?id=44266