I want to loop over the contents of a text file and do a search and replace on some lines and write the result back to the file. I could first load the whole file in memory and then write it back, but that probably is not the best way to do it.
What is the best way to do this, within the following code?
f = open(file)
for line in f:
if line.contains('foo'):
newline = line.replace('foo', 'bar')
# how to write this newline back to the file
The shortest way would probably be to use the fileinput module. For example, the following adds line numbers to a file, in-place:
import fileinput
for line in fileinput.input("test.txt", inplace=True):
print('{} {}'.format(fileinput.filelineno(), line), end='') # for Python 3
# print "%d: %s" % (fileinput.filelineno(), line), # for Python 2
What happens here is:
The original file is moved to a backup file
The standard output is redirected to the original file within the loop
Thus any print statements write back into the original file
fileinput has more bells and whistles. For example, it can be used to automatically operate on all files in sys.args[1:], without your having to iterate over them explicitly. Starting with Python 3.2 it also provides a convenient context manager for use in a with statement.
While fileinput is great for throwaway scripts, I would be wary of using it in real code because admittedly it's not very readable or familiar. In real (production) code it's worthwhile to spend just a few more lines of code to make the process explicit and thus make the code readable.
There are two options:
The file is not overly large, and you can just read it wholly to memory. Then close the file, reopen it in writing mode and write the modified contents back.
The file is too large to be stored in memory; you can move it over to a temporary file and open that, reading it line by line, writing back into the original file. Note that this requires twice the storage.
I guess something like this should do it. It basically writes the content to a new file and replaces the old file with the new file:
from tempfile import mkstemp
from shutil import move, copymode
from os import fdopen, remove
def replace(file_path, pattern, subst):
#Create temp file
fh, abs_path = mkstemp()
with fdopen(fh,'w') as new_file:
with open(file_path) as old_file:
for line in old_file:
new_file.write(line.replace(pattern, subst))
#Copy the file permissions from the old file to the new file
copymode(file_path, abs_path)
#Remove original file
remove(file_path)
#Move new file
move(abs_path, file_path)
Here's another example that was tested, and will match search & replace patterns:
import fileinput
import sys
def replaceAll(file,searchExp,replaceExp):
for line in fileinput.input(file, inplace=1):
if searchExp in line:
line = line.replace(searchExp,replaceExp)
sys.stdout.write(line)
Example use:
replaceAll("/fooBar.txt","Hello\sWorld!$","Goodbye\sWorld.")
This should work: (inplace editing)
import fileinput
# Does a list of files, and
# redirects STDOUT to the file in question
for line in fileinput.input(files, inplace = 1):
print line.replace("foo", "bar"),
Based on the answer by Thomas Watnedal.
However, this does not answer the line-to-line part of the original question exactly. The function can still replace on a line-to-line basis
This implementation replaces the file contents without using temporary files, as a consequence file permissions remain unchanged.
Also re.sub instead of replace, allows regex replacement instead of plain text replacement only.
Reading the file as a single string instead of line by line allows for multiline match and replacement.
import re
def replace(file, pattern, subst):
# Read contents from file as a single string
file_handle = open(file, 'r')
file_string = file_handle.read()
file_handle.close()
# Use RE package to allow for replacement (also allowing for (multiline) REGEX)
file_string = (re.sub(pattern, subst, file_string))
# Write contents to file.
# Using mode 'w' truncates the file.
file_handle = open(file, 'w')
file_handle.write(file_string)
file_handle.close()
As lassevk suggests, write out the new file as you go, here is some example code:
fin = open("a.txt")
fout = open("b.txt", "wt")
for line in fin:
fout.write( line.replace('foo', 'bar') )
fin.close()
fout.close()
If you're wanting a generic function that replaces any text with some other text, this is likely the best way to go, particularly if you're a fan of regex's:
import re
def replace( filePath, text, subs, flags=0 ):
with open( filePath, "r+" ) as file:
fileContents = file.read()
textPattern = re.compile( re.escape( text ), flags )
fileContents = textPattern.sub( subs, fileContents )
file.seek( 0 )
file.truncate()
file.write( fileContents )
A more pythonic way would be to use context managers like the code below:
from tempfile import mkstemp
from shutil import move
from os import remove
def replace(source_file_path, pattern, substring):
fh, target_file_path = mkstemp()
with open(target_file_path, 'w') as target_file:
with open(source_file_path, 'r') as source_file:
for line in source_file:
target_file.write(line.replace(pattern, substring))
remove(source_file_path)
move(target_file_path, source_file_path)
You can find the full snippet here.
fileinput is quite straightforward as mentioned on previous answers:
import fileinput
def replace_in_file(file_path, search_text, new_text):
with fileinput.input(file_path, inplace=True) as file:
for line in file:
new_line = line.replace(search_text, new_text)
print(new_line, end='')
Explanation:
fileinput can accept multiple files, but I prefer to close each single file as soon as it is being processed. So placed single file_path in with statement.
print statement does not print anything when inplace=True, because STDOUT is being forwarded to the original file.
end='' in print statement is to eliminate intermediate blank new lines.
You can used it as follows:
file_path = '/path/to/my/file'
replace_in_file(file_path, 'old-text', 'new-text')
Create a new file, copy lines from the old to the new, and do the replacing before you write the lines to the new file.
Expanding on #Kiran's answer, which I agree is more succinct and Pythonic, this adds codecs to support the reading and writing of UTF-8:
import codecs
from tempfile import mkstemp
from shutil import move
from os import remove
def replace(source_file_path, pattern, substring):
fh, target_file_path = mkstemp()
with codecs.open(target_file_path, 'w', 'utf-8') as target_file:
with codecs.open(source_file_path, 'r', 'utf-8') as source_file:
for line in source_file:
target_file.write(line.replace(pattern, substring))
remove(source_file_path)
move(target_file_path, source_file_path)
Using hamishmcn's answer as a template I was able to search for a line in a file that match my regex and replacing it with empty string.
import re
fin = open("in.txt", 'r') # in file
fout = open("out.txt", 'w') # out file
for line in fin:
p = re.compile('[-][0-9]*[.][0-9]*[,]|[-][0-9]*[,]') # pattern
newline = p.sub('',line) # replace matching strings with empty string
print newline
fout.write(newline)
fin.close()
fout.close()
if you remove the indent at the like below, it will search and replace in multiple line.
See below for example.
def replace(file, pattern, subst):
#Create temp file
fh, abs_path = mkstemp()
print fh, abs_path
new_file = open(abs_path,'w')
old_file = open(file)
for line in old_file:
new_file.write(line.replace(pattern, subst))
#close temp file
new_file.close()
close(fh)
old_file.close()
#Remove original file
remove(file)
#Move new file
move(abs_path, file)
Related
I have the following code:
import re
#open the xml file for reading:
file = open('path/test.xml','r+')
#convert to string:
data = file.read()
file.write(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>",r"<xyz>ABC</xyz>\1<xyz>\2</xyz>",data))
file.close()
where I'd like to replace the old content that's in the file with the new content. However, when I execute my code, the file "test.xml" is appended, i.e. I have the old content follwed by the new "replaced" content. What can I do in order to delete the old stuff and only keep the new?
You need seek to the beginning of the file before writing and then use file.truncate() if you want to do inplace replace:
import re
myfile = "path/test.xml"
with open(myfile, "r+") as f:
data = f.read()
f.seek(0)
f.write(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>", r"<xyz>ABC</xyz>\1<xyz>\2</xyz>", data))
f.truncate()
The other way is to read the file then open it again with open(myfile, 'w'):
with open(myfile, "r") as f:
data = f.read()
with open(myfile, "w") as f:
f.write(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>", r"<xyz>ABC</xyz>\1<xyz>\2</xyz>", data))
Neither truncate nor open(..., 'w') will change the inode number of the file (I tested twice, once with Ubuntu 12.04 NFS and once with ext4).
By the way, this is not really related to Python. The interpreter calls the corresponding low level API. The method truncate() works the same in the C programming language: See http://man7.org/linux/man-pages/man2/truncate.2.html
file='path/test.xml'
with open(file, 'w') as filetowrite:
filetowrite.write('new content')
Open the file in 'w' mode, you will be able to replace its current text save the file with new contents.
Using truncate(), the solution could be
import re
#open the xml file for reading:
with open('path/test.xml','r+') as f:
#convert to string:
data = f.read()
f.seek(0)
f.write(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>",r"<xyz>ABC</xyz>\1<xyz>\2</xyz>",data))
f.truncate()
import os#must import this library
if os.path.exists('TwitterDB.csv'):
os.remove('TwitterDB.csv') #this deletes the file
else:
print("The file does not exist")#add this to prevent errors
I had a similar problem, and instead of overwriting my existing file using the different 'modes', I just deleted the file before using it again, so that it would be as if I was appending to a new file on each run of my code.
See from How to Replace String in File works in a simple way and is an answer that works with replace
fin = open("data.txt", "rt")
fout = open("out.txt", "wt")
for line in fin:
fout.write(line.replace('pyton', 'python'))
fin.close()
fout.close()
in my case the following code did the trick
with open("output.json", "w+") as outfile: #using w+ mode to create file if it not exists. and overwrite the existing content
json.dump(result_plot, outfile)
Using python3 pathlib library:
import re
from pathlib import Path
import shutil
shutil.copy2("/tmp/test.xml", "/tmp/test.xml.bak") # create backup
filepath = Path("/tmp/test.xml")
content = filepath.read_text()
filepath.write_text(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>",r"<xyz>ABC</xyz>\1<xyz>\2</xyz>", content))
Similar method using different approach to backups:
from pathlib import Path
filepath = Path("/tmp/test.xml")
filepath.rename(filepath.with_suffix('.bak')) # different approach to backups
content = filepath.read_text()
filepath.write_text(re.sub(r"<string>ABC</string>(\s+)<string>(.*)</string>",r"<xyz>ABC</xyz>\1<xyz>\2</xyz>", content))
I am trying to ammend a group of files in a folder, by adding F to the 4th line (which is number 3 in python, if I'm correct). With the following code below, the code is just continuously running and not making the amendments, anyone got any ideas?
import os
from glob import glob
list_of_files = glob('*.gjf') # get list of all .gjf files
for file in list_of_files:
# read file:
with open(file, 'r+') as f:
lines=f.readlines()
for line in lines:
lines.insert(3,'F')
for file in files:
# read your file's lines
with open(file, 'r') as f:
lines = f.readlines()
# add the value to insert in the list of lines at index 3
# don't forget line-break (\n)
lines.insert(3, 'F\n')
# join lines to create a string
text = ''.join(lines)
# don't forget to write the string back in your file
with open(file, 'w') as f:
f.write(text)
You are not able to edit a file with Python in this way. You would need to create a temporary file and then do some cleanup at the end by renaming the temporary file and removing the temporary file. The core logic is to read through the original files and add an F to the 4th line, otherwise just add the line. This can be done with a function like this:
import os
def add_f_4th_line(filename):
with open(filename, 'r') as f_in:
with opne('temp', 'w') as f_out:
for line_number, line_contents in enumerate(f_in):
if line_number == 3:
f_out.write(line_contents.replace('\n', 'F\n'))
else:
f_out.write(line_contents)
os.rename('temp', filename)
os.remove('temp')
enumerate will keep make an iterator of the line number and the contents of the line, so just iterate over each line, and you can find the 4th line with line_number == 3. Then, it will take that line and replace \n with F\n. \n is a new line character, so I'm assuming the end of the line is this character. So after adding this function, you'll just need to call this function for each file you get with your glob call.
import os
from glob import glob
list_of_files = glob('*.gjf') # get list of all .gjf files
for file in list_of_files:
add_f_4th_line(file)
I'm using Python, and would like to insert a string into a text file without deleting or copying the file. How can I do that?
Unfortunately there is no way to insert into the middle of a file without re-writing it. As previous posters have indicated, you can append to a file or overwrite part of it using seek but if you want to add stuff at the beginning or the middle, you'll have to rewrite it.
This is an operating system thing, not a Python thing. It is the same in all languages.
What I usually do is read from the file, make the modifications and write it out to a new file called myfile.txt.tmp or something like that. This is better than reading the whole file into memory because the file may be too large for that. Once the temporary file is completed, I rename it the same as the original file.
This is a good, safe way to do it because if the file write crashes or aborts for any reason, you still have your untouched original file.
Depends on what you want to do. To append you can open it with "a":
with open("foo.txt", "a") as f:
f.write("new line\n")
If you want to preprend something you have to read from the file first:
with open("foo.txt", "r+") as f:
old = f.read() # read everything in the file
f.seek(0) # rewind
f.write("new line\n" + old) # write the new line before
The fileinput module of the Python standard library will rewrite a file inplace if you use the inplace=1 parameter:
import sys
import fileinput
# replace all occurrences of 'sit' with 'SIT' and insert a line after the 5th
for i, line in enumerate(fileinput.input('lorem_ipsum.txt', inplace=1)):
sys.stdout.write(line.replace('sit', 'SIT')) # replace 'sit' and write
if i == 4: sys.stdout.write('\n') # write a blank line after the 5th line
Rewriting a file in place is often done by saving the old copy with a modified name. Unix folks add a ~ to mark the old one. Windows folks do all kinds of things -- add .bak or .old -- or rename the file entirely or put the ~ on the front of the name.
import shutil
shutil.move(afile, afile + "~")
destination= open(aFile, "w")
source= open(aFile + "~", "r")
for line in source:
destination.write(line)
if <some condition>:
destination.write(<some additional line> + "\n")
source.close()
destination.close()
Instead of shutil, you can use the following.
import os
os.rename(aFile, aFile + "~")
Python's mmap module will allow you to insert into a file. The following sample shows how it can be done in Unix (Windows mmap may be different). Note that this does not handle all error conditions and you might corrupt or lose the original file. Also, this won't handle unicode strings.
import os
from mmap import mmap
def insert(filename, str, pos):
if len(str) < 1:
# nothing to insert
return
f = open(filename, 'r+')
m = mmap(f.fileno(), os.path.getsize(filename))
origSize = m.size()
# or this could be an error
if pos > origSize:
pos = origSize
elif pos < 0:
pos = 0
m.resize(origSize + len(str))
m[pos+len(str):] = m[pos:origSize]
m[pos:pos+len(str)] = str
m.close()
f.close()
It is also possible to do this without mmap with files opened in 'r+' mode, but it is less convenient and less efficient as you'd have to read and temporarily store the contents of the file from the insertion position to EOF - which might be huge.
As mentioned by Adam you have to take your system limitations into consideration before you can decide on approach whether you have enough memory to read it all into memory replace parts of it and re-write it.
If you're dealing with a small file or have no memory issues this might help:
Option 1)
Read entire file into memory, do a regex substitution on the entire or part of the line and replace it with that line plus the extra line. You will need to make sure that the 'middle line' is unique in the file or if you have timestamps on each line this should be pretty reliable.
# open file with r+b (allow write and binary mode)
f = open("file.log", 'r+b')
# read entire content of file into memory
f_content = f.read()
# basically match middle line and replace it with itself and the extra line
f_content = re.sub(r'(middle line)', r'\1\nnew line', f_content)
# return pointer to top of file so we can re-write the content with replaced string
f.seek(0)
# clear file content
f.truncate()
# re-write the content with the updated content
f.write(f_content)
# close file
f.close()
Option 2)
Figure out middle line, and replace it with that line plus the extra line.
# open file with r+b (allow write and binary mode)
f = open("file.log" , 'r+b')
# get array of lines
f_content = f.readlines()
# get middle line
middle_line = len(f_content)/2
# overwrite middle line
f_content[middle_line] += "\nnew line"
# return pointer to top of file so we can re-write the content with replaced string
f.seek(0)
# clear file content
f.truncate()
# re-write the content with the updated content
f.write(''.join(f_content))
# close file
f.close()
Wrote a small class for doing this cleanly.
import tempfile
class FileModifierError(Exception):
pass
class FileModifier(object):
def __init__(self, fname):
self.__write_dict = {}
self.__filename = fname
self.__tempfile = tempfile.TemporaryFile()
with open(fname, 'rb') as fp:
for line in fp:
self.__tempfile.write(line)
self.__tempfile.seek(0)
def write(self, s, line_number = 'END'):
if line_number != 'END' and not isinstance(line_number, (int, float)):
raise FileModifierError("Line number %s is not a valid number" % line_number)
try:
self.__write_dict[line_number].append(s)
except KeyError:
self.__write_dict[line_number] = [s]
def writeline(self, s, line_number = 'END'):
self.write('%s\n' % s, line_number)
def writelines(self, s, line_number = 'END'):
for ln in s:
self.writeline(s, line_number)
def __popline(self, index, fp):
try:
ilines = self.__write_dict.pop(index)
for line in ilines:
fp.write(line)
except KeyError:
pass
def close(self):
self.__exit__(None, None, None)
def __enter__(self):
return self
def __exit__(self, type, value, traceback):
with open(self.__filename,'w') as fp:
for index, line in enumerate(self.__tempfile.readlines()):
self.__popline(index, fp)
fp.write(line)
for index in sorted(self.__write_dict):
for line in self.__write_dict[index]:
fp.write(line)
self.__tempfile.close()
Then you can use it this way:
with FileModifier(filename) as fp:
fp.writeline("String 1", 0)
fp.writeline("String 2", 20)
fp.writeline("String 3") # To write at the end of the file
If you know some unix you could try the following:
Notes: $ means the command prompt
Say you have a file my_data.txt with content as such:
$ cat my_data.txt
This is a data file
with all of my data in it.
Then using the os module you can use the usual sed commands
import os
# Identifiers used are:
my_data_file = "my_data.txt"
command = "sed -i 's/all/none/' my_data.txt"
# Execute the command
os.system(command)
If you aren't aware of sed, check it out, it is extremely useful.
there are multiple files in directory with extension .txt, .dox, .qcr etc.
i need to list out txt files, search & replace the text from each txt files only.
need to search the $$\d ...where \d stands for the digit 1,2,3.....100.
need to replace with xxx.
please let me know the python script for this .
thanks in advance .
-Shrinivas
#created following script, it works for single txt files, but it is not working for txt files more than one lies in directory.
-----
def replaceAll(file,searchExp,replaceExp):
for line in fileinput.input(file, inplace=1):
if searchExp in line:
line = line.replace(searchExp,replaceExp)
sys.stdout.write(line)
#following code is not working, i expect to list out the files start #with "um_*.txt", open the file & replace the "$$\d" with replaceAll function.
for um_file in glob.glob('*.txt'):
t = open(um_file, 'r')
replaceAll("t.read","$$\d","xxx")
t.close()
fileinput.input(...) is supposed to process a bunch of files, and must be ended with a corresponding fileinput.close(). So you can either process all in one single call:
def replaceAll(file,searchExp,replaceExp):
for line in fileinput.input(file, inplace=True):
if searchExp in line:
line = line.replace(searchExp,replaceExp)
dummy = sys.stdout.write(line) # to avoid a possible output of the size
fileinput.close() # to orderly close everythin
replaceAll(glob.glob('*.txt'), "$$\d","xxx")
or consistently close fileinput after processing each file, but it rather ignores the main fileinput feature.
Try out this.
import re
def replaceAll(file,searchExp,replaceExp):
for line in file.readlines():
try:
line = line.replace(re.findall(searchExp,line)[0],replaceExp)
except:
pass
sys.stdout.write(line)
#following code is not working, i expect to list out the files start #with "um_*.txt", open the file & replace the "$$\d" with replaceAll function.
for um_file in glob.glob('*.txt'):
t = open(um_file, 'r')
replaceAll(t,"\d+","xxx")
t.close()
Here we are sending file handler to the replaceAll function rather than a string.
You can try this:
import os
import re
the_files = [i for i in os.listdir("foldername") if i.endswith("txt")]
for file in the_files:
new_data = re.sub("\d+", "xxx", open(file).read())
final_file = open(file, 'w')
final_file.write(new_data)
final_file.close()
I want to loop over the contents of a text file and do a search and replace on some lines and write the result back to the file. I could first load the whole file in memory and then write it back, but that probably is not the best way to do it.
What is the best way to do this, within the following code?
f = open(file)
for line in f:
if line.contains('foo'):
newline = line.replace('foo', 'bar')
# how to write this newline back to the file
The shortest way would probably be to use the fileinput module. For example, the following adds line numbers to a file, in-place:
import fileinput
for line in fileinput.input("test.txt", inplace=True):
print('{} {}'.format(fileinput.filelineno(), line), end='') # for Python 3
# print "%d: %s" % (fileinput.filelineno(), line), # for Python 2
What happens here is:
The original file is moved to a backup file
The standard output is redirected to the original file within the loop
Thus any print statements write back into the original file
fileinput has more bells and whistles. For example, it can be used to automatically operate on all files in sys.args[1:], without your having to iterate over them explicitly. Starting with Python 3.2 it also provides a convenient context manager for use in a with statement.
While fileinput is great for throwaway scripts, I would be wary of using it in real code because admittedly it's not very readable or familiar. In real (production) code it's worthwhile to spend just a few more lines of code to make the process explicit and thus make the code readable.
There are two options:
The file is not overly large, and you can just read it wholly to memory. Then close the file, reopen it in writing mode and write the modified contents back.
The file is too large to be stored in memory; you can move it over to a temporary file and open that, reading it line by line, writing back into the original file. Note that this requires twice the storage.
I guess something like this should do it. It basically writes the content to a new file and replaces the old file with the new file:
from tempfile import mkstemp
from shutil import move, copymode
from os import fdopen, remove
def replace(file_path, pattern, subst):
#Create temp file
fh, abs_path = mkstemp()
with fdopen(fh,'w') as new_file:
with open(file_path) as old_file:
for line in old_file:
new_file.write(line.replace(pattern, subst))
#Copy the file permissions from the old file to the new file
copymode(file_path, abs_path)
#Remove original file
remove(file_path)
#Move new file
move(abs_path, file_path)
Here's another example that was tested, and will match search & replace patterns:
import fileinput
import sys
def replaceAll(file,searchExp,replaceExp):
for line in fileinput.input(file, inplace=1):
if searchExp in line:
line = line.replace(searchExp,replaceExp)
sys.stdout.write(line)
Example use:
replaceAll("/fooBar.txt","Hello\sWorld!$","Goodbye\sWorld.")
This should work: (inplace editing)
import fileinput
# Does a list of files, and
# redirects STDOUT to the file in question
for line in fileinput.input(files, inplace = 1):
print line.replace("foo", "bar"),
Based on the answer by Thomas Watnedal.
However, this does not answer the line-to-line part of the original question exactly. The function can still replace on a line-to-line basis
This implementation replaces the file contents without using temporary files, as a consequence file permissions remain unchanged.
Also re.sub instead of replace, allows regex replacement instead of plain text replacement only.
Reading the file as a single string instead of line by line allows for multiline match and replacement.
import re
def replace(file, pattern, subst):
# Read contents from file as a single string
file_handle = open(file, 'r')
file_string = file_handle.read()
file_handle.close()
# Use RE package to allow for replacement (also allowing for (multiline) REGEX)
file_string = (re.sub(pattern, subst, file_string))
# Write contents to file.
# Using mode 'w' truncates the file.
file_handle = open(file, 'w')
file_handle.write(file_string)
file_handle.close()
As lassevk suggests, write out the new file as you go, here is some example code:
fin = open("a.txt")
fout = open("b.txt", "wt")
for line in fin:
fout.write( line.replace('foo', 'bar') )
fin.close()
fout.close()
If you're wanting a generic function that replaces any text with some other text, this is likely the best way to go, particularly if you're a fan of regex's:
import re
def replace( filePath, text, subs, flags=0 ):
with open( filePath, "r+" ) as file:
fileContents = file.read()
textPattern = re.compile( re.escape( text ), flags )
fileContents = textPattern.sub( subs, fileContents )
file.seek( 0 )
file.truncate()
file.write( fileContents )
A more pythonic way would be to use context managers like the code below:
from tempfile import mkstemp
from shutil import move
from os import remove
def replace(source_file_path, pattern, substring):
fh, target_file_path = mkstemp()
with open(target_file_path, 'w') as target_file:
with open(source_file_path, 'r') as source_file:
for line in source_file:
target_file.write(line.replace(pattern, substring))
remove(source_file_path)
move(target_file_path, source_file_path)
You can find the full snippet here.
fileinput is quite straightforward as mentioned on previous answers:
import fileinput
def replace_in_file(file_path, search_text, new_text):
with fileinput.input(file_path, inplace=True) as file:
for line in file:
new_line = line.replace(search_text, new_text)
print(new_line, end='')
Explanation:
fileinput can accept multiple files, but I prefer to close each single file as soon as it is being processed. So placed single file_path in with statement.
print statement does not print anything when inplace=True, because STDOUT is being forwarded to the original file.
end='' in print statement is to eliminate intermediate blank new lines.
You can used it as follows:
file_path = '/path/to/my/file'
replace_in_file(file_path, 'old-text', 'new-text')
Create a new file, copy lines from the old to the new, and do the replacing before you write the lines to the new file.
Expanding on #Kiran's answer, which I agree is more succinct and Pythonic, this adds codecs to support the reading and writing of UTF-8:
import codecs
from tempfile import mkstemp
from shutil import move
from os import remove
def replace(source_file_path, pattern, substring):
fh, target_file_path = mkstemp()
with codecs.open(target_file_path, 'w', 'utf-8') as target_file:
with codecs.open(source_file_path, 'r', 'utf-8') as source_file:
for line in source_file:
target_file.write(line.replace(pattern, substring))
remove(source_file_path)
move(target_file_path, source_file_path)
Using hamishmcn's answer as a template I was able to search for a line in a file that match my regex and replacing it with empty string.
import re
fin = open("in.txt", 'r') # in file
fout = open("out.txt", 'w') # out file
for line in fin:
p = re.compile('[-][0-9]*[.][0-9]*[,]|[-][0-9]*[,]') # pattern
newline = p.sub('',line) # replace matching strings with empty string
print newline
fout.write(newline)
fin.close()
fout.close()
if you remove the indent at the like below, it will search and replace in multiple line.
See below for example.
def replace(file, pattern, subst):
#Create temp file
fh, abs_path = mkstemp()
print fh, abs_path
new_file = open(abs_path,'w')
old_file = open(file)
for line in old_file:
new_file.write(line.replace(pattern, subst))
#close temp file
new_file.close()
close(fh)
old_file.close()
#Remove original file
remove(file)
#Move new file
move(abs_path, file)