Related
I am trying to define a function which will approximate pi in python using one of Euler's methods. His formula is as follows:
My code so far is this:
def pi_euler1(n):
numerator = list(range(2 , n))
for i in numerator:
j = 2
while i * j <= numerator[-1]:
if i * j in numerator:
numerator.remove(i * j)
j += 1
for k in numerator:
if (k + 1) % 4 == 0:
denominator = k + 1
else:
denominator = k - 1
#Because all primes are odd, both numbers inbetween them are divisible by 2,
#and by extension 1 of the 2 numbers is divisible by 4
term = numerator / denominator
I know this is wrong, and also incomplete. I'm just not quite sure what the TypeError that I mentioned earlier actually means. I'm just quite stuck with it, I want to create a list of the terms and then find their products. Am I on the right lines?
Update:
I have worked ways around this, fixing the clearly obvious errors that were prevalent thanks to msconi and Johanc, now with the following code:
import math
def pi_euler1(n):
numerator = list(range(2 , 13 + math.ceil(n*(math.log(n)+math.log(math.log(n))))))
denominator=[]
for i in numerator:
j = 2
while i * j <= numerator[-1]:
if (i * j) in numerator:
numerator.remove(i * j)
j += 1
numerator.remove(2)
for k in numerator:
if (k + 1) % 4 == 0:
denominator.append(k+1)
else:
denominator.append(k-1)
a=1
for i in range(n):
a *= numerator[i] / denominator[i]
return 4*a
This seems to work, when I tried to plot a graph of the errors from pi in a semilogy axes scale, I was getting a domain error, but i needed to change the upper bound of the range to n+1 because log(0) is undefined. Thank you guys
Here is the code with some small modifications to get it working:
import math
def pi_euler1(n):
lim = n * n + 4
numerator = list(range(3, lim, 2))
for i in numerator:
j = 3
while i * j <= numerator[-1]:
if i * j in numerator:
numerator.remove(i * j)
j += 2
euler_product = 1
for k in numerator[:n]:
if (k + 1) % 4 == 0:
denominator = k + 1
else:
denominator = k - 1
factor = k / denominator
euler_product *= factor
return euler_product * 4
print(pi_euler1(3))
print(pi_euler1(10000))
print(math.pi)
Output:
3.28125
3.148427801913721
3.141592653589793
Remarks:
You only want the odd primes, so you can start with a list of odd numbers.
j can start with 3 and increment in steps of 2. In fact, j can start at i because all the multiples of i smaller than i*i are already removed earlier.
In general it is very bad practise to remove elements from the list over which you are iterating. See e.g. this post. Internally, Python uses an index into the list over which it iterates. Coincidently, this is not a problem in this specific case, because only numbers larger than the current are removed.
Also, removing elements from a very long list is very slow, as each time the complete list needs to be moved to fill the gap. Therefore, it is better to work with two separate lists.
You didn't calculate the resulting product, nor did you return it.
As you notice, this formula converges very slowly.
As mentioned in the comments, the previous version interpreted n as the limit for highest prime, while in fact n should be the number of primes. I adapted the code to rectify that. In the above version with a crude limit; the version below tries a tighter approximation for the limit.
Here is a reworked version, without removing from the list you're iterating. Instead of removing elements, it just marks them. This is much faster, so a larger n can be used in a reasonable time:
import math
def pi_euler_v3(n):
if n < 3:
lim = 6
else:
lim = n*n
while lim / math.log(lim) / 2 > n:
lim //= 2
print(n, lim)
numerator = list(range(3, lim, 2))
odd_primes = []
for i in numerator:
if i is not None:
odd_primes.append(i)
if len(odd_primes) >= n:
break
j = i
while i * j < lim:
numerator[(i*j-3) // 2] = None
j += 2
if len(odd_primes) != n:
print(f"Wrong limit calculation, only {len(odd_primes)} primes instead of {n}")
euler_product = 1
for k in odd_primes:
denominator = k + 1 if k % 4 == 3 else k - 1
euler_product *= k / denominator
return euler_product * 4
print(pi_euler_v2(100000))
print(math.pi)
Output:
3.141752253548891
3.141592653589793
In term = numerator / denominator you are dividing a list by a number, which doesn't make sense. Divide k by the denominator in the loop in order to use the numerator element for each of the equation's factors one by one. Then you could multiply them repeatedly to the term term *= i / denominator, which you initialize in the beginning as term = 1.
Another issue is the first loop, which won't give you the first n prime numbers. For example, for n=3, list(range(2 , n)) = [2]. Therefore, the only prime you will get is 2.
Examples,
1.Input=4
Output=111
Explanation,
1 = 1³(divisors of 1)
2 = 1³ + 2³(divisors of 2)
3 = 1³ + 3³(divisors of 3)
4 = 1³ + 2³ + 4³(divisors of 4)
------------------------
sum = 111(output)
1.Input=5
Output=237
Explanation,
1 = 1³(divisors of 1)
2 = 1³ + 2³(divisors of 2)
3 = 1³ + 3³(divisors of 3)
4 = 1³ + 2³ + 4³(divisors of 4)
5 = 1³ + 5³(divisors of 5)
-----------------------------
sum = 237 (output)
x=int(raw_input().strip())
tot=0
for i in range(1,x+1):
for j in range(1,i+1):
if(i%j==0):
tot+=j**3
print tot
Using this code I can find the answer for small number less than one million.
But I want to find the answer for very large numbers. Is there any algorithm
for how to solve it easily for large numbers?
Offhand I don't see a slick way to make this truly efficient, but it's easy to make it a whole lot faster. If you view your examples as matrices, you're summing them a row at a time. This requires, for each i, finding all the divisors of i and summing their cubes. In all, this requires a number of operations proportional to x**2.
You can easily cut that to a number of operations proportional to x, by summing the matrix by columns instead. Given an integer j, how many integers in 1..x are divisible by j? That's easy: there are x//j multiples of j in the range, so divisor j contributes j**3 * (x // j) to the grand total.
def better(x):
return sum(j**3 * (x // j) for j in range(1, x+1))
That runs much faster, but still takes time proportional to x.
There are lower-level tricks you can play to speed that in turn by constant factors, but they still take O(x) time overall. For example, note that x // j == 1 for all j such that x // 2 < j <= x. So about half the terms in the sum can be skipped, replaced by closed-form expressions for a sum of consecutive cubes:
def sum3(x):
"""Return sum(i**3 for i in range(1, x+1))"""
return (x * (x+1) // 2)**2
def better2(x):
result = sum(j**3 * (x // j) for j in range(1, x//2 + 1))
result += sum3(x) - sum3(x//2)
return result
better2() is about twice as fast as better(), but to get faster than O(x) would require deeper insight.
Quicker
Thinking about this in spare moments, I still don't have a truly clever idea. But the last idea I gave can be carried to a logical conclusion: don't just group together divisors with only one multiple in range, but also those with two multiples in range, and three, and four, and ... That leads to better3() below, which does a number of operations roughly proportional to the square root of x:
def better3(x):
result = 0
for i in range(1, x+1):
q1 = x // i
# value i has q1 multiples in range
result += i**3 * q1
# which values have i multiples?
q2 = x // (i+1) + 1
assert x // q1 == i == x // q2
if i < q2:
result += i * (sum3(q1) - sum3(q2 - 1))
if i+1 >= q2: # this becomes true when i reaches roughly sqrt(x)
break
return result
Of course O(sqrt(x)) is an enormous improvement over the original O(x**2), but for very large arguments it's still impractical. For example better3(10**6) appears to complete instantly, but better3(10**12) takes a few seconds, and better3(10**16) is time for a coffee break ;-)
Note: I'm using Python 3. If you're using Python 2, use xrange() instead of range().
One more
better4() has the same O(sqrt(x)) time behavior as better3(), but does the summations in a different order that allows for simpler code and fewer calls to sum3(). For "large" arguments, it's about 50% faster than better3() on my box.
def better4(x):
result = 0
for i in range(1, x+1):
d = x // i
if d >= i:
# d is the largest divisor that appears `i` times, and
# all divisors less than `d` also appear at least that
# often. Account for one occurence of each.
result += sum3(d)
else:
i -= 1
lastd = x // i
# We already accounted for i occurrences of all divisors
# < lastd, and all occurrences of divisors >= lastd.
# Account for the rest.
result += sum(j**3 * (x // j - i)
for j in range(1, lastd))
break
return result
It may be possible to do better by extending the algorithm in "A Successive Approximation Algorithm for Computing the Divisor Summatory Function". That takes O(cube_root(x)) time for the possibly simpler problem of summing the number of divisors. But it's much more involved, and I don't care enough about this problem to pursue it myself ;-)
Subtlety
There's a subtlety in the math that's easy to miss, so I'll spell it out, but only as it pertains to better4().
After d = x // i, the comment claims that d is the largest divisor that appears i times. But is that true? The actual number of times d appears is x // d, which we did not compute. How do we know that x // d in fact equals i?
That's the purpose of the if d >= i: guarding that comment. After d = x // i we know that
x == d*i + r
for some integer r satisfying 0 <= r < i. That's essentially what floor division means. But since d >= i is also known (that's what the if test ensures), it must also be the case that 0 <= r < d. And that's how we know x // d is i.
This can break down when d >= i is not true, which is why a different method needs to be used then. For example, if x == 500 and i == 51, d (x // i) is 9, but it's certainly not the case that 9 is the largest divisor that appears 51 times. In fact, 9 appears 500 // 9 == 55 times. While for positive real numbers
d == x/i
if and only if
i == x/d
that's not always so for floor division. But, as above, the first does imply the second if we also know that d >= i.
Just for Fun
better5() rewrites better4() for about another 10% speed gain. The real pedagogical point is to show that it's easy to compute all the loop limits in advance. Part of the point of the odd code structure above is that it magically returns 0 for a 0 input without needing to test for that. better5() gives up on that:
def isqrt(n):
"Return floor(sqrt(n)) for int n > 0."
g = 1 << ((n.bit_length() + 1) >> 1)
d = n // g
while d < g:
g = (d + g) >> 1
d = n // g
return g
def better5(x):
assert x > 0
u = isqrt(x)
v = x // u
return (sum(map(sum3, (x // d for d in range(1, u+1)))) +
sum(x // i * i**3 for i in range(1, v)) -
u * sum3(v-1))
def sum_divisors(n):
sum = 0
i = 0
for i in range (1, n) :
if n % i == 0 and n != 0 :
sum = sum + i
# Return the sum of all divisors of n, not including n
return sum
print(sum_divisors(0))
# 0
print(sum_divisors(3)) # Should sum of 1
# 1
print(sum_divisors(36)) # Should sum of 1+2+3+4+6+9+12+18
# 55
print(sum_divisors(102)) # Should be sum of 2+3+6+17+34+51
# 114
I am not sure whether this question was posted before, after searching it, I cannot find it.
Question: Give one number, to print all factor product.
Example:
Given number: 20
Output: 1 * 20
2 * 10
2 * 2 * 5
4 * 5
Given number: 30
Output: 1 * 30
2 * 15
2 * 3 * 5
3 * 10
5 * 6
Here are my thoughts:
Solution 1.
step 1) First, get all prime factors of this number
def get_prime_factors(n):
factors = []
if n == 0:
return factors
# Get the number of 2s that divide n
while n%2 == 0:
factors.append(2)
n /= 2
# n must be odd
for i in range(3, int(ceil(sqrt(n))), 2):
while n%i == 0:
factors.append(i)
n /= i
# handle the case n is prime number greater than 2s
if n > 2:
factors.append(n)
return factors
step 2) Then get the combination of those factors
I plan to get all factor product through combination, however, I am stuck in how to handle those duplicate factors in this case? (question 1)
Solution 2:
Solve it through backtracking method.
def get_factors_recv(n, cur_ret, ret):
for i in range(2, int(ceil(sqrt(n)))):
if n%i == 0:
fact_arr = [i, n/i]
# add the current value to current result
cur_ret.extend(fact_arr)
if sorted(cur_ret) not in ret:
ret.append(sorted(cur_ret))
# backtracking
cur_ret = cur_ret[:-2]
get_factors_recv(n/i, cur_ret + [i], ret)
def get_all_factors_product(n):
if n == 0:
return '';
result = []
# push the simple factor multiplier
result.append([1, n])
get_factors_recv(n, [], result)
return result
I want to know is there any optimization for the above codes? (Question 2)
Is there any better solution to solve it? (Question 3)
A simple while loop can solve your first problem of dupicates. Given a number:
num_list = []
i = 2;
num = 72*5*5*19*10
while i <=num:
if(num%i == 0):
num_list.append(i)
num = num/i
else:
i = i + 1
print num_list
num_list will contain the factors. The idea is to not increase the index variable untill the number is no longer divisible by it. Also the number keeps reducing after every division so the loop will actually run a lot less iterations than the actual number. Instead of
while i<=num
you can also use
while i<=num/2
This is correct mathematically and results in further reduction of no of iterations.
This will give you all the factors.
Hope this helps.
number = 30
factors = []
for i in range(1, number+1):
if number%i == 0:
factors.append(i)
print factors
I am trying to find an efficient way to compute Euler's totient function.
What is wrong with this code? It doesn't seem to be working.
def isPrime(a):
return not ( a < 2 or any(a % i == 0 for i in range(2, int(a ** 0.5) + 1)))
def phi(n):
y = 1
for i in range(2,n+1):
if isPrime(i) is True and n % i == 0 is True:
y = y * (1 - 1/i)
else:
continue
return int(y)
Here's a much faster, working way, based on this description on Wikipedia:
Thus if n is a positive integer, then φ(n) is the number of integers k in the range 1 ≤ k ≤ n for which gcd(n, k) = 1.
I'm not saying this is the fastest or cleanest, but it works.
from math import gcd
def phi(n):
amount = 0
for k in range(1, n + 1):
if gcd(n, k) == 1:
amount += 1
return amount
You have three different problems...
y needs to be equal to n as initial value, not 1
As some have mentioned in the comments, don't use integer division
n % i == 0 is True isn't doing what you think because of Python chaining the comparisons! Even if n % i equals 0 then 0 == 0 is True BUT 0 is True is False! Use parens or just get rid of comparing to True since that isn't necessary anyway.
Fixing those problems,
def phi(n):
y = n
for i in range(2,n+1):
if isPrime(i) and n % i == 0:
y *= 1 - 1.0/i
return int(y)
Calculating gcd for every pair in range is not efficient and does not scales. You don't need to iterate throught all the range, if n is not a prime you can check for prime factors up to its square root, refer to https://stackoverflow.com/a/5811176/3393095.
We must then update phi for every prime by phi = phi*(1 - 1/prime).
def totatives(n):
phi = int(n > 1 and n)
for p in range(2, int(n ** .5) + 1):
if not n % p:
phi -= phi // p
while not n % p:
n //= p
#if n is > 1 it means it is prime
if n > 1: phi -= phi // n
return phi
I'm working on a cryptographic library in python and this is what i'm using. gcd() is Euclid's method for calculating greatest common divisor, and phi() is the totient function.
def gcd(a, b):
while b:
a, b=b, a%b
return a
def phi(a):
b=a-1
c=0
while b:
if not gcd(a,b)-1:
c+=1
b-=1
return c
Most implementations mentioned by other users rely on calling a gcd() or isPrime() function. In the case you are going to use the phi() function many times, it pays of to calculated these values before hand. A way of doing this is by using a so called sieve algorithm.
https://stackoverflow.com/a/18997575/7217653 This answer on stackoverflow provides us with a fast way of finding all primes below a given number.
Oke, now we can replace isPrime() with a search in our array.
Now the actual phi function:
Wikipedia gives us a clear example: https://en.wikipedia.org/wiki/Euler%27s_totient_function#Example
phi(36) = phi(2^2 * 3^2) = 36 * (1- 1/2) * (1- 1/3) = 30 * 1/2 * 2/3 = 12
In words, this says that the distinct prime factors of 36 are 2 and 3; half of the thirty-six integers from 1 to 36 are divisible by 2, leaving eighteen; a third of those are divisible by 3, leaving twelve numbers that are coprime to 36. And indeed there are twelve positive integers that are coprime with 36 and lower than 36: 1, 5, 7, 11, 13, 17, 19, 23, 25, 29, 31, and 35.
TL;DR
With other words: We have to find all the prime factors of our number and then multiply these prime factors together using foreach prime_factor: n *= 1 - 1/prime_factor.
import math
MAX = 10**5
# CREDIT TO https://stackoverflow.com/a/18997575/7217653
def sieve_for_primes_to(n):
size = n//2
sieve = [1]*size
limit = int(n**0.5)
for i in range(1,limit):
if sieve[i]:
val = 2*i+1
tmp = ((size-1) - i)//val
sieve[i+val::val] = [0]*tmp
return [2] + [i*2+1 for i, v in enumerate(sieve) if v and i>0]
PRIMES = sieve_for_primes_to(MAX)
print("Primes generated")
def phi(n):
original_n = n
prime_factors = []
prime_index = 0
while n > 1: # As long as there are more factors to be found
p = PRIMES[prime_index]
if (n % p == 0): # is this prime a factor?
prime_factors.append(p)
while math.ceil(n / p) == math.floor(n / p): # as long as we can devide our current number by this factor and it gives back a integer remove it
n = n // p
prime_index += 1
for v in prime_factors: # Now we have the prime factors, we do the same calculation as wikipedia
original_n *= 1 - (1/v)
return int(original_n)
print(phi(36)) # = phi(2**2 * 3**2) = 36 * (1- 1/2) * (1- 1/3) = 36 * 1/2 * 2/3 = 12
It looks like you're trying to use Euler's product formula, but you're not calculating the number of primes which divide a. You're calculating the number of elements relatively prime to a.
In addition, since 1 and i are both integers, so is the division, in this case you always get 0.
With regards to efficiency, I haven't noticed anyone mention that gcd(k,n)=gcd(n-k,n). Using this fact can save roughly half the work needed for the methods involving the use of the gcd. Just start the count with 2 (because 1/n and (n-1)/k will always be irreducible) and add 2 each time the gcd is one.
Here is a shorter implementation of orlp's answer.
from math import gcd
def phi(n): return sum([gcd(n, k)==1 for k in range(1, n+1)])
As others have already mentioned it leaves room for performance optimization.
Actually to calculate phi(any number say n)
We use the Formula
where p are the prime factors of n.
So, you have few mistakes in your code:
1.y should be equal to n
2. For 1/i actually 1 and i both are integers so their evaluation will also be an integer,thus it will lead to wrong results.
Here is the code with required corrections.
def phi(n):
y = n
for i in range(2,n+1):
if isPrime(i) and n % i == 0 :
y -= y/i
else:
continue
return int(y)
I have the following code for Project Euler Problem 12. However, it takes a very long time to execute. Does anyone have any suggestions for speeding it up?
n = input("Enter number: ")
def genfact(n):
t = []
for i in xrange(1, n+1):
if n%i == 0:
t.append(i)
return t
print "Numbers of divisors: ", len(genfact(n))
print
m = input("Enter the number of triangle numbers to check: ")
print
for i in xrange (2, m+2):
a = sum(xrange(i))
b = len(genfact(a))
if b > 500:
print a
For n, I enter an arbitrary number such as 6 just to check whether it indeed returns the length of the list of the number of factors.
For m, I enter entered 80 000 000
It works relatively quickly for small numbers. If I enter b > 50 ; it returns 28 for a, which is correct.
My answer here isn't pretty or elegant, it is still brute force. But, it simplifies the problem space a little and terminates successfully in less than 10 seconds.
Getting factors of n:
Like #usethedeathstar mentioned, it is possible to test for factors only up to n/2. However, we can do better by testing only up to the square root of n:
let n = 36
=> factors(n) : (1x36, 2x18, 3x12, 4x9, 6x6, 9x4, 12x3, 18x2, 36x1)
As you can see, it loops around after 6 (the square root of 36). We also don't need to explicitly return the factors, just find out how many there are... so just count them off with a generator inside of sum():
import math
def get_factors(n):
return sum(2 for i in range(1, round(math.sqrt(n)+1)) if not n % i)
Testing the triangular numbers
I have used a generator function to yield the triangular numbers:
def generate_triangles(limit):
l = 1
while l <= limit:
yield sum(range(l + 1))
l += 1
And finally, start testing:
def test_triangles():
triangles = generate_triangles(100000)
for i in triangles:
if get_factors(i) > 499:
return i
Running this with the profiler, it completes in less than 10 seconds:
$ python3 -m cProfile euler12.py
361986 function calls in 8.006 seconds
The BIGGEST time saving here is get_factors(n) testing only up to the square root of n - this makes it heeeaps quicker and you save heaps of memory overhead by not generating a list of factors.
As I said, it still isn't pretty - I am sure there are more elegant solutions. But, it fits the bill of being faster :)
I got my answer to run in 1.8 seconds with Python.
import time
from math import sqrt
def count_divisors(n):
d = {}
count = 1
while n % 2 == 0:
n = n / 2
try:
d[2] += 1
except KeyError:
d[2] = 1
for i in range(3, int(sqrt(n+1)), 2):
while n % i == 0 and i != n:
n = n / i
try:
d[i] += 1
except KeyError:
d[i] = 1
d[n] = 1
for _,v in d.items():
count = count * (v + 1)
return count
def tri_number(num):
next = 1 + int(sqrt(1+(8 * num)))
return num + (next/2)
def main():
i = 1
while count_divisors(i) < 500:
i = tri_number(i)
return i
start = time.time()
answer = main()
elapsed = (time.time() - start)
print("result %s returned in %s seconds." % (answer, elapsed))
Here is the output showing the timedelta and correct answer:
$ python ./project012.py
result 76576500 returned in 1.82238006592 seconds.
Factoring
For counting the divisors, I start by initializing an empty dictionary and a counter. For each factor found, I create key of d[factor] with value of 1 if it does not exist, otherwise, I increment the value d[factor].
For example, if we counted the factors 100, we would see d = {25: 1, 2: 2}
The first while loop, I factor out all 2's, dividing n by 2 each time. Next, I begin factoring at 3, skipping two each time (since we factored all even numbers already), and stopping once I get to the square root of n+1.
We stop at the square_root of n because if there's a pair of factors with one of the numbers bigger than square_root of n, the other of the pair has to be less than 10. If the smaller one doesn't exist, there is no matching larger factor.
https://math.stackexchange.com/questions/1343171/why-only-square-root-approach-to-check-number-is-prime
while n % 2 == 0:
n = n / 2
try:
d[2] += 1
except KeyError:
d[2] = 1
for i in range(3, int(sqrt(n+1)), 2):
while n % i == 0 and i != n:
n = n / i
try:
d[i] += 1
except KeyError:
d[i] = 1
d[n] = 1
Now that I have gotten each factor, and added it to the dictionary, we have to add the last factor (which is just n).
Counting Divisors
Now that the dictionary is complete, we loop through each of the items, and apply the following formula: d(n)=(a+1)(b+1)(c+1)...
https://www.wikihow.com/Determine-the-Number-of-Divisors-of-an-Integer
All this formula means is taking all of the counts of each factor, adding 1, then multiplying them together. Take 100 for example, which has factors 25, 2, and 2. We would calculate d(n)=(a+1)(b+1) = (1+1)(2+1) = (2)(3) = 6 total divisors
for _,v in d.items():
count = count * (v + 1)
return count
Calculate Triangle Numbers
Now, taking a look at tri_number(), you can see that I opted to calculate the next triangle number in a sequence without manually adding each whole number together (saving me millions of operations). Instead I used T(n) = n (n+1) / 2
http://www.maths.surrey.ac.uk/hosted-sites/R.Knott/runsums/triNbProof.html
We are providing a whole number to the function as an argument, so we need to solve for n, which is going to be the whole number to add next. Once we have the next number (n), we simply add that single number to num and return
S=n(n+1)2
S=n2+n2
2S=n2+n
n2+n−2S=0
At this point, we use the quadratic formula for : ax2+bx+c=0.
n=−b±√b2−4ac / 2a
n=−1±√1−4(1)(−2S) / 2
n=−1±√1+8S / 2
https://socratic.org/questions/how-do-you-solve-for-n-in-s-n-n-1-2
So all tri_number() does is evaluate n=1+√1+8S / 2 (we ignore the negative equation here). The answer that is returned is the next triangle number in the sequence.
def tri_number(num):
next = 1 + int(sqrt(1+(8 * num)))
return num + (next/2)
Main Loop
Finally, we can look at main(). We start at whole number 1. We count the divisor of 1. If it is less than 500, we get the next triangle number, then try again and again until we get a number with > 500 divisors.
def main():
i = 1
while count_divisors(i) < 500:
i = tri_number(i)
return i
I am sure there are additional ways to optimize but I am not smart enough to understand those ways. If you find any better ways to optimize python, let me know! I originally solved project 12 in Golang, and that run in 25 milliseconds!
$ go run project012.go
76576500
2018/07/12 01:56:31 TIME: main() took 23.581558ms
one of the hints i can give is
def genfact(n):
t = []
for i in xrange(1, n+1):
if n%i == 0:
t.append(i)
return t
change that to
def genfact(n):
t=[]
for i in xrange(1,numpy.sqrt(n)+1):
if(n%i==0):
t.append(i)
t.apend(n/i)
since if a is a divisor than so is b=n/a, since a*b=a*n/b=n, That should help a part already (not sure if in your case a square is possible, but if so, add another case to exclude adding the same number twice)
You could devise a recursive thing too, (like if it is something like for 28, you get 1,28,2,14 and at the moment you are at knowing 14, you put in something to actually remember the divisors of 14 (memoize), than check if they are alraedy in the list, and if not, add them to the list, together with 28/d for each of the divisors of 14, and at the end just take out the duplicates
If you think my first answer is still not fast enough, ask for more, and i will check how it would be done to solve it faster with some more tricks (could probably make use of erastothenes sieve or so too, and some other tricks could be thought up as well if you would wish to really blow up the problem to huge proportions, like to check the first one with over 10k divisors or so)
while True:
c=0
n=1
m=1
for i in range(1,n+1):
if n%i==0:
c=c+1
m=m+1
n=m*(m+1)/2
if c>500:
break
print n
this is not my code but it is so optimized.
source: http://code.jasonbhill.com/sage/project-euler-problem-12/
import time
def num_divisors(n):
if n % 2 == 0: n = n / 2
divisors = 1
count = 0
while n % 2 == 0:
count += 1
n = n / 2
divisors = divisors * (count + 1)
p = 3
while n != 1:
count = 0
while n % p == 0:
count += 1
n = n / p
divisors = divisors * (count + 1)
p += 2
return divisors
def find_triangular_index(factor_limit):
n = 1
lnum, rnum = num_divisors(n), num_divisors(n + 1)
while lnum * rnum < 500:
n += 1
lnum, rnum = rnum, num_divisors(n + 1)
return n
start = time.time()
index = find_triangular_index(500)
triangle = (index * (index + 1)) / 2
elapsed = (time.time() - start)
print("result %s returned in %s seconds." % (triangle, elapsed))