I'm having trouble with using 'requests' module on my Mac. I use python34 and I installed 'requests' module via pip. I can verify this via running installation again and it'll show me that module is already installed.
15:49:29|mymac [~]:pip install requests
Requirement already satisfied (use --upgrade to upgrade): requests in /opt/local/Library/Frameworks/Python.framework/Versions/3.4/lib/python3.4/site-packages
Although I can import 'requests' module via interactive Python interpreter, trying to execute 'import requests' in PyCharm yields error 'No module named requests'. I checked my PyCharm Python interpreter settings and (I believe) it's set to same python34 as used in my environment. However, I can't see 'requests' module listed in PyCharm either.
It's obvious that I'm missing something here. Can you guys advise where should I look or what should I fix in order to get this module working? I was living under impression that when I install module via pip in my environment, PyCharm will detect these changes. However, it seems something is broken on my side ...
In my case, using a pre-existing virtualenv did not work in the editor - all modules were marked as unresolved reference (running naturally works, as this is outside of the editor's config, just running an external process (not so easy for debugging)).
Turns out PyCharm did not add the site-packages directory... the fix is to manually add it.
On Pycharm professional 2022.3
Open File -> Settings -> Python Interpreter, open the drop-down and pick "Show All..." (to edit the config) (1), right click your interpreter (2), click "Show Interpreter Paths" (3).
In that screen, manually add the "site-packages" directory of the virtual environment [looks like .../venv/lib/python3.8/site-packages (4) (I've added the "Lib" also, for a good measure); once done and saved, they will turn up in the interpreter paths.
The other thing that won't hurt to do is select "Associate this virtual environment with the current project", in the interpreter's edit box.
If you are using PyCharms CE (Community Edition), then click on:
File->Default Settings->Project Interpreter
See the + sign at the bottom, click on it. It will open another dialog with a host of modules available. Select your package (e.g. requests) and PyCharm will do the rest.
This issue arises when the package you're using was installed outside of the environment (Anaconda or virtualenv, for example). In order to have PyCharm recognize packages installed outside of your particular environment, execute the following steps:
Go to
Preferences -> Project -> Project Interpreter -> 3 dots -> Show All ->
Select relevant interpreter -> click on tree icon Show paths for the selected interpreter
Now check what paths are available and add the path that points to the package installation directory outside of your environment to the interpreter paths.
To find a package location use:
$ pip show gym
Name: gym
Version: 0.13.0
Summary: The OpenAI Gym: A toolkit for developing and comparing your reinforcement learning agents.
Home-page: https://github.com/openai/gym
Author: OpenAI
Author-email: gym#openai.com
License: UNKNOWN
Location: /usr/local/lib/python3.7/site-packages
...
Add the path specified under Location to the interpreter paths, here
/usr/local/lib/python3.7/site-packages
Then, let indexing finish and perhaps additionally reopen your project.
Open python console of your pyCharm. Click on Rerun.
It will say something like following on the very first line
/System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 /Applications/PyCharm.app/Contents/helpers/pydev/pydevconsole.py 52631 52632
in this scenario pyCharm is using following interpretor
/System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7
Now fire up console and run following command
sudo /System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 -m pip install <name of the package>
This should install your package :)
Pycharm is unable to recognize installed local modules, since python interpreter selected is wrong. It should be the one, where your pip packages are installed i.e. virtual environment.
I had installed packages via pip in Windows. In Pycharm, they were neither detected nor any other Python interpreter was being shown (only python 3.6 is installed on my system).
I restarted the IDE. Now I was able to see python interpreter created in my virtual environment. Select that python interpreter and all your packages will be shown and detected. Enjoy!
Using dual python 2.7 and 3.4 with 2.7 as default, I've always used pip3 to install modules for the 3.4 interpreter, and pip to install modules for the 2.7 interpreter.
Try this:
pip3 install requests
This is because you have not selected two options while creating your project:-
** inherit global site packages
** make available to all projects
Now you need to create a new project and don't forget to tick these two options while selecting project interpreter.
The solution is easy (PyCharm 2021.2.3 Community Edition).
I'm on Windows but the user interface should be the same.
In the project tree, open External libraries > Python interpreter > venv > pyvenv.cfg.
Then change:
include-system-site-packages = false
to:
include-system-site-packages = true
Before going further, I want to point out how to configure a Python interpreter in PyCharm: [SO]: How to install Python using the "embeddable zip file" (#CristiFati's answer). Although the question is for Win, and has some particularities, configuring PyCharm is generic enough and should apply to any situation (with minor changes).
There are multiple possible reasons for this behavior.
1. Python instance mismatch
Happens when there are multiple Python instances (installed, VEnvs, Conda, custom built, ...) on a machine. Users think they're using one particular instance (with a set of properties (installed packages)), but in fact they are using another (with different properties), hence the confusion. It's harder to figure out things when the 2 instances have the same version (and somehow similar locations)
Happens mostly due to environmental configuration (whichever path comes 1st in ${PATH}, aliases (on Nix), ...)
It's not PyCharm specific (meaning that it's more generic, also happens outside it), but a typical PyCharm related example is different console interpreter and project interpreter, leading to confusion
The fix is to specify full paths (and pay attention to them) when using tools like Python, PIP, .... Check [SO]: How to install a package for a specific Python version on Windows 10? (#CristiFati's answer) for more details
This is precisely the reason why this question exists. There are 2 Python versions involved:
Project interpreter: /Library/Frameworks/Python.framework/Versions/3.4
Interpreter having the Requests module: /opt/local/Library/Frameworks/Python.framework/Versions/3.4
well, assuming the 2 paths are not somehow related (SymLinked), but in latest OSX versions that I had the chance to check (Catalina, Big Sur, Monterey) this doesn't happen (by default)
When dealing with this kind of error, it always helps (most likely) displaying the following information (in a script or interpreter console):
import os
import sys
print(sys.executable)
print(sys.version)
print(os.getcwd())
print(getattr(os, "uname", lambda: None)())
print(sys.path)
2. Python's module search mechanism misunderstanding
According to [Python.Docs]: Modules - The Module Search Path:
When a module named spam is imported, the interpreter first searches for a built-in module with that name. These module names are listed in sys.builtin_module_names. If not found, it then searches for a file named spam.py in a list of directories given by the variable sys.path. sys.path is initialized from these locations:
The directory containing the input script (or the current directory when no file is specified).
PYTHONPATH (a list of directory names, with the same syntax as the shell variable PATH).
The installation-dependent default (by convention including a site-packages directory, handled by the site module).
A module might be located in the current dir, or its path might be added to ${PYTHONPATH}. That could trick users into making them believe that the module is actually installed in the current Python instance ('s site-packages). But, when running the current Python instance from a different dir (or with different ${PYTHONPATH}) the module would be missing, yielding lots of headaches
For a fix, check [SO]: How PyCharm imports differently than system command prompt (Windows) (#CristiFati's answer)
3. A PyCharm bug
Not very likely, but it could happen. An example (not related to this question): [SO]: PyCharm 2019.2 not showing Traceback on Exception (#CristiFati's answer)
To fix, follow one of the options from the above URL
4. A glitch
Not likely, but mentioning anyway. Due to some cause (e.g.: HW / SW failure), the system ended up in an inconsistent state, yielding all kinds of strange behaviors
Possible fixes:
Restart PyCharm
Restart the machine
Recreate the project (remove the .idea dir from the project)
Reset PyCharm settings: from menu select File -> Manage IDE Settings -> Restore Default Settings.... Check [JetBrains]: Configuring PyCharm settings or [JetBrains.IntelliJ-Support]: Changing IDE default directories used for config, plugins, and caches storage for more details
Reinstall PyCharm
Needless to say that the last 2 options should only be attempted as a last resort, and only by experts, as they might mess up other projects and not even fix the problem
Not directly related to the question, but posting:
[SO]: Run / Debug a Django application's UnitTests from the mouse right click context menu in PyCharm Community Edition? (a PyCharm related investigation from a while ago)
[SO]: ImportError: No module named win32com.client (#CristiFati's answer)
If you go to pycharm project interpreter -> clicked on one of the installed packages then hover -> you will see where pycharm is installing the packages. This is where you are supposed to have your package installed.
Now if you did sudo -H pip3 install <package>
pip3 installs it to different directory which is /usr/local/lib/site-packages
since it is different directory from what pycharm knows hence your package is not showing in pycharm.
Solution: just install the package using pycharm by going to File->Settings->Project->Project Interpreter -> click on (+) and search the package you want to install and just click ok.
-> you will be prompted package successfully installed and you will see it pycharm.
If any one faces the same problem that he/she installs the python packages but the PyCharm IDE doesn't shows these packages then following the following steps:
Go to the project in the left side of the PyCharm IDE then
Click on the venv library then
Open the pyvenv.cfg file in any editor then
Change this piece of code (include-system-site-packages = flase) from false to true
Then save it and close it and also close then pycharm then
Open PyCharm again and your problem is solved.
Thanks
This did my head in as well, and turns out, the only thing I needed to do is RESTART Pycharm. Sometimes after you've installed the pip, you can't load it into your project, even if the pip shows as installed in your Settings. Bummer.
For Anaconda:
Start Anaconda Navigator -> Enviroments -> "Your_Enviroment" -> Update Index -> Restart IDE.
Solved it for me.
After pip installing everything I needed. I went to the interpreter and re-pointed it back to where it was at already.
My case: python3.6 in /anaconda3/bin/python using virtualenv...
Additionally, before I hit the plus "+" sign to install a new package. I had to deselect the conda icon to the right of it. Seems like it would be the opposite, but only then did it recognize the packages I had/needed via query.
In my case the packages were installed via setup.py + easy_install, and the they ends up in *.egg directories in site_package dir, which can be recognized by python but not pycharm.
I removed them all then reinstalled with pip install and it works after that, luckily the project I was working on came up with a requirements.txt file, so the command for it was:
pip install -r ./requirement.txt
I just ran into this issue in a brand new install/project, but I'm using the Python plugin for IntelliJ IDEA. It's essentially the same as PyCharm but the project settings are a little different. For me, the project was pointing to the right Python virtual environment but not even built-in modules were being recognized.
It turns out the SDK classpath was empty. I added paths for venv/lib/python3.8 and venv/lib/python3.8/site-packages and the issue was resolved. File->Project Structure and under Platform Settings, click SDKs, select your Python SDK, and make sure the class paths are there.
pip install --user discord
above command solves my problem, just use the "--user" flag
I fixed my particular issue by installing directly to the interpreter. Go to settings and hit the "+" below the in-use interpreter then search for the package and install. I believe I'm having the issue in the first place because I didn't set up with my interpreter correctly with my venv (not exactly sure, but this fixed it).
I was having issues with djangorestframework-simplejwt because it was the first package I hadn't installed to this interpreter from previous projects before starting the current one, but should work for any other package that isn't showing as imported. To reiterate though I think this is a workaround that doesn't solve the setup issue causing this.
If you are having issues with the underlying (i.e. pycharm's languge server) mark everything as root and create a new project. See details: https://stackoverflow.com/a/73418320/1601580 this seems to happy to me only when I install packages as in editable mode with pip (i.e. pip install -e . or conda develop). Details: https://stackoverflow.com/a/73418320/1601580
--WINDOWS--
if using Pycharm GUI package installer works fine for installing packages for your virtual environment but you cannot do the same in the terminal,
this is because you did not setup virtual env in your terminal, instead, your terminal uses Power Shell which doesn't use your virtual env
there should be (venv) before you're command line as shown instead of (PS)
if you have (PS), this means your terminal is using Power Shell instead of cmd
to fix this, click on the down arrow and select the command prompt
select command prompt
now you will get (venv) and just type pip install #package name# and the package will be added to your virtual environment
On windows I had to cd into the venv folder and then cd into the scripts folder, then pip install module started to work
cd venv
cd scripts
pip install module
instead of running pip install in the terminal -> local use terminal -> command prompt
see below image
pycharm_command_prompt_image
In your pycharm terminal run pip/pip3 install package_name
My question is do i have to install django every single time in my virtual environment in order to run my python files? and is this taking up bunch of space on my machine? My project also uses "matplotlib" and every virtual environment i create it also asks me to import the matplotlib module too. its getting annoying. do i have to do this every time?
Im new to Django. I wanted to run some python files in django but they weren't working, so after some research i found out i needed to run my pycharm project in a virtual environment in order to run these python files.
my folders look like this pycharmProjects -> my project
I enter pycharmProjects and I set up virtual environment using "pienv shell". Then i run "python3 manage.py runserver". It turns out i must install django in the virtual environment before the files run.
Short answer is no, you don't have to use a virtual environment at all and can install your dependancies globally instead. However you will soon find that it will cause a lot of issues. The main reason you would create a virtual environment is to give control of your dependancies and prevent bugs that could be caused because of them having their wires crossed between projects.
Short answer yes.
If you create a virualenv you have to install all packages, that your program needs.
Long answer:
You could install django system wide and then create a virtualenv with the option
--system-site-packages then django would be used from your globally installed python.
(Or you install everything just in your global python, put I personally don't think this is good practice)
If you work with many different projects I think you will avoid a lot of trouble if you use one virtualenv per project.
Trouble meaning that one project breaks, because one pip install for another project changed the version of one package and one project can't handle the newer version.
I would recommend to create a requirements.txt file for each project, that lists the dependencies then you can create the virtualenv with following command
pip install -r requirements.txt
if you have requirement.txt files, then you can create virtualenvs rather quickly if going back to an old project and you can delete the virtualenvs whenever you run out of disk space. If you want to be an the safe side, type pip freeze > pipfreeze.txt prior to deleting the virtualenv and use pip install -r pipfreeze.txt if you want to create one with the same modules and the same versions.
You also might want to look at direnv or autoenv if working on a linux like system.
This will automatically switch to the required virtualenv when changing to a project's working directory.
I was required to install anaconda for a CS course and used spyder and Rstudio.
Then, for a different class I used pycharm.
When I type on the command line "python -V" I get:
Python 3.6.1 :: Anaconda 4.4.0 (x86_64)
and I have no idea why it relates the python version I have installed with Anaconda (and why not pycharm?). I understand that the OS runs python 2.7 (shouldn't I get that instead? and when I type python3 -V get which version of python 3 I have?) and when I use something like Pycharm or Spyder I can choose which version I want from the ones I have installed and use it within the program, not for the terminal.
I just want to have everything in order and under control. I don't think I understand what Anaconda really is (to me is like a program that has more programs in it...). How do I keep anaconda to itself ? 1313
Also, should the packages I installed through Terminal work on both pycharm and spyder/anaconda even though when I used pycharm I used python 3.5 and anaconda 3.6?
I think I need definitions and help to get everything in order in my head and the computer.
Pycharm is just an application to help you write code. Pycharm itself does not run python code. This is why in PyCharm, you need to set the interpreter for a project, which could be any python binary. In PyCharm, go to Preferences > Project > Project Interpreter to see where you would set the python environment being used for a given project. This could point to any python installation on your machine, whether that is the python 2.7 located at /usr/bin/python or a virtual environment in your project dir.
The industry standard way to "keep things in order" is to use what are called virtual environments. See here: https://docs.python.org/3/library/venv.html. A virtual environment is literally just a copy of a python environment (binaries and everything) so whatever directory you specify. This allows you to configure your environment to however you need in your project without interfering with other projects you might have. For example, say project A requires django 1.9.2 but project b requires 1.5.3. By having a virtual environment for each project, dependencies won't conflict.
Since you have python3.6, I would recommend going to you project directory in a terminal window. Running python -m venv .venv to create a hidden directory which contains a local python environment of whatever your 3.6 python installation. You could then set your project interpret to use that environment. to connect to it on the command line, run source .venv/bin/activate from where you created your virtual environment. run which python again and see that python is now referencing your virtual environment :)
If you are using a mac (which I believe you are from what you said about python2.7), what likely happened is that your anaconda installer put the Python bin directory on your PATH environment variable. Type in which python to see what the python alias is referencing. You can undo this if you want by editing your ~/.bash_profile file if you really want.
You are more or less correct about anaconda. It is itself another distribution of python and contains a load of common libraries/dependencies that tend to make life easier. For a lot of data analysis, you likely won't even need to install another dependency with pip after downloading anaconda.
I suspect this won't be all too helpful at first as it is a lot to learn, but hopefully this points you in the right direction.