We Keep Coding

Understanding selenium web-elements list

Ok so I had a list of web items created by seleniums Webdriver.find_elements_by_path method, and I had trouble utilizing the data.
Ultimately, the code I needed to get what I wanted was this:
menu_items=driver.find_elements_by_xpath('//div[#role="menuitem"]')[-2]
I was only ever able to get any meaningful data here by using a negative index. If I used any positive indices, the menu_items would return nothing.
However, when I had left menu_items as follows:
menu_items=driver.find_elements_by_xpath('//div[#role="menuitem"]')
I could iterate through the list and gain access to the webelements properly, meaning if I had"for i in menu_items" I could call something like i.text and have the desired result. But again, I could not do menu_items[2]. I am new to selenium so if someone could explain what is going on here, that would be very helpful

This line of code...
menu_items=driver.find_elements_by_xpath('//div[#role="menuitem"]')[-2]
...indicates you are considering the second element counting from the right instead of the left as list[-1] refers to the last element within the list and list[-2] refers to the second last element in the list.
A bit more about your usecase would have helped us to construct a canonical answer. The number of visible/interactable elements at any given point of time and/or the sequence in which the elements gets visible/interactable may vary based on the type of elements present in the DOM Tree. Incase the HTML DOM consists of JavaScript, Angular, ReactJS, enabled elements even the position of the elements may differ as well.

Python: Easy way to loop through dictionary parameters from a list of evaluated strings?

I have a dictionary created from a json file. This dictionary has a nested structure and every few weeks additional parameters are added.
I use a script to generate additional copies of the existing parameters when I want multiple "legs" added. So I first add the additional legs. So say I start with 1 leg as my template and I want 10 legs, I will just clone that leg 9 more times and add it to the list.
Then I loop through each of the parameters (called attributes) and have to clone certain elements for each leg that was added so that it has a 1:1 match. I don't care about the content so cloning the first leg value is fine.
So I do the following:
while len(data['attributes']['groupA']['params']['weights']) < legCount:
data['attributes']['groupA']['params']['weights'].append(data['attributes']['groupA']['params']['weights'][0])
while len(data['attributes']['groupB']['paramsGroup']['factors']) < legCount:
data['attributes']['groupB']['paramsGroup']['factors'].append(data['attributes']['groupB']['paramsGroup']['factors'][0])
while len(data['attributes']['groupC']['items']['delta']) < legCount:
data['attributes']['groupC']['items']['delta'].append(data['attributes']['groupC']['items']['delta'][0])
What I'd like to do is make these attributes all strings and just loop through them dynamically so that when I need to add additional ones, I can just paste one string into my list and it works without having another while loop.
So I converted it to this:
attribs = [
"data['attributes']['groupA']['params']['weights']",
"data['attributes']['groupB']['paramsGroup']['factors']",
"data['attributes']['groupC']['items']['delta']",
"data['attributes']['groupD']['xxxx']['yyyy']"
]
for attrib in attribs:
while len(eval(attrib)) < legCount:
eval(attrib).append(eval(attrib)[0])
In this case eval is safe because there is no user input, just a defined list of entries. Tho I wouldn't mind finding an alternative to eval either.
It works up until the last line. I don't think the .append is working on the eval() result. It's not throwing an error.. just not appending to the element.
Any ideas on the best way to handle this?

Not 100% sure this will fix it, but I do notice one thing.
In your above code in your while condition you are accessing:
data['attributes']['groupA']['params']['weights']
then you are appending to
data['attributes']['groupA']['params']['legs']
In your below code it looks like you are appending to 'weights' on the first iteration. However, this doesn't explain the other attributes you are evaluating... just one red flag I noticed.

Actually my code was working. I was just checking the wrong variable. Thanks Me! :)

Using nested for loops to iterate through JSON file of tweets in Python

So I am new to Python, but I know what I am trying to accomplish. Basically, I have the output of tweets from twitter in a JSON file loaded into Python. What I need to do is iterate through the tweets to access the "text" key, that has the text of each tweet, because that's what I'm going to use to do topic modeling. So, I have discovered that "text" is triple nested in this data structure, and it's been really difficult to find the correct way to write the for loop code in order to iterate through the dataset and pull the "text" from every tweet.
Here is a look at what the JSON structure is like: https://pastebin.com/fUH5MTMx
So, I have figured out that the "text" key that I want is within [hits][hits][_source]. What I can't figure out is the appropriate for loop to iterate through _source and pull those texts. Here is my code so far (again I'm very beginning sorry if try code is way off):
for hits in tweets["hits"]["hits"]:
for _source in hits:
for text in _source:
for item in text:
print(item)
also tried this:
for item in tweets['hits']["hits"]["_source"]:
print(item['text'])
But I keep getting either syntax errors for the first one then "TypeError: list indices must be integers or slices, not str" for the second one. I am understanding that I need to specify some way that I am trying to access this list, and that I'm missing something in order to show that its a list and I am not looking for integers as an output from iterations...(I am using the JSON module in Python for this, an using a Mac with Python3 in Spyder)
Any insight would be greatly appreciated! This multiple nesting is confusing me a lot.

['hits']["hits"] is not dictionary with ["_source"]
but a list with one or many items which have ["_source"]
it means
tweets['hits']["hits"][0]["_source"]
tweets['hits']["hits"][1]["_source"]
tweets['hits']["hits"][2]["_source"]
So this should work
for item in tweets['hits']["hits"]:
print(item["_source"]['text'])

Not sure if you realize it, but JSON is transformed into a Python dictionary, not a list. Anyway, let's get into this nest.
tweets['hits'] will give you another dict.
tweets['hits']['hits'] will give you a list (notice the brackets)
This apparently is a list of dictionaries, and in this case (not sure if it will always be), the dict with the "_source" key you are looking for is the first one,so:
tweets['hits']['hits'][0] will give you the dict you want. Then, finally:
tweets['hits']['hits'][0]['_source'] should give you the text.

The value of the second "hits" is a list.
Try:
for hit in tweets["hits"]["hits"]:
print(hit["_source"]["text"])

Selecting all items individually in a list

I was wondering if it is possible to re-select each and every item in the rsList?
I am citing a simple example below but I am looking at hundreds of items in the scene and hence below are the simplest form of coding I am able to come up with base on my limited knowledge of Python
rsList = cmds.ls(type='resShdrSrf')
# Output: [u'pCube1_GenShdr', u'pPlane1_GenShdr', u'pSphere1_GenShdr']
I tried using the following cmds.select but it is taking my last selection (in memory) - pSphere1_GenShdr into account while forgetting the other 2 even though all three items are seen selected in the UI.
Tried using a list and append, but it also does not seems to be working and the selection remains the same...
list = []
for item in rsList:
list.append(item)
cmds.select(items)
#cmds.select(list)
As such, will it be possible for me to perform a cmds.select on each of the item individually?

if your trying to just select each item:
import pymel.core as pm
for i in pm.ls(sl=True):
i.select()
but this should have no effect in your rendering

I think for mine, it is a special case in which I would need to add in mm.eval("autoUpdateAttrEd;") for the first creation of my shader before I can duplicate.
Apparently I need this command in order to get it to work

Fastest way to handle a submit button with a variable in it?

I've got a form with a bunch of items. Beside each item is a "Remove" button. When one of buttons is pressed, I need to know which one so that I know which item to remove.
The way I have it now, each button is named remove-# where # is the index of the item. In order to grab the # though I have to loop over every POST value, check if the key starts with remove- and if it does, parse out the integer.
Is there any method that would be faster than O(n) where n is the number of post vars?
Not that n is so large that this would become an expensive operation, but mostly because I'm curious.
Also, before I get any answers that suggest I use JavaScript and put an onclick event on each button to move the index into a separate hidden input.... I'm trying to do this without JavaScript.

An option would be to put each remove button in a separate form, with a hidden value with a constant name and the value indicating which item to remove.

If the POST values are stored in a dict you could turn this around and instead of looking for something that looks like a remove-# you generate all remove-# and try to use them to index the dict. That would limit the search to O(m) where m is the number of elements that can be removed.

This really is the domain of Javascript. However adding onclick isn't a great way to do this. Use HTML5 data attributes and unobtrusive listeners.. For example, in JQuery/HTML5
<input type='button' class='remove-button' name='remove' data-remove-attr='5'>
$('.remove-button').live("click", function() {
alert($(this).attr("data-remove-attr")); // Alerts 5.
});
Despite the data- being an HTML5 thing, it is backwards compatible with old IE, etc as they always allowed arbitrary dom attributes.
Edit: Note this is O(1) if as your action you did $('#remove-'+id).hide();