i have a simple webcam opening using cv2 module:
cap=cv2.VideoCapture(0)
while True:
ret, img = cap.read()
cv2.imshow('webcam',img)
k=cv2.waitKey(10)
if k == 27:
break
cap.release()
cv2.destroyWindows()
this program runs for ever, although i try to close it, the only way is closing vsCode
You can close the webcam window by clicking on your webcam window and press esc while if you want to close it with specific alphabet then you can use the below code to destroy the window by pressing q.
import cv2
cap=cv2.VideoCapture(0)
while True:
ret, img = cap.read()
cv2.imshow('webcam',img)
if cv2.waitKey(10) & 0xFF == ord('q'):
break
cap.release()
cv2.destroyAllWindows()
I'm working with OpenCV and trying to figure this out. When I want to read and show an image:
import cv2
img = cv2.imread('baboon.jpg', 0)
cv2.imshow('image', img)
cv2.waitKey(0)
cv2.destroyWindow('image')
I write this. But whenever the image display window pops up, I'm not able to close it and execute everything after
cv2.imshow('image', img)
cv2.waitKey(0)
cv2.destroyWindow('image')
because the window will not close unless I quit it.
For example, if I run this code
import cv2
img = cv2.imread('baboon.jpg', 0)
cv2.imshow('image', img)
cv2.waitKey(0)
cv2.destroyWindow('image')
#Nothing after this will get executed
print('Hello')
I get no output in my console, but the image window does pop up.
How can I fix this?
(I'm using Pycharm if that helps)
EDIT:
It seems that whenever I press any key the window closes and it works as intended (code after the comment is executed). Not sure why this is happening.
I believe the quit is acting as an interrupt, which quits the entire python program. This is different than pressing a key, which is incorporated into the logic of the actual program and continues to completion:
cv2.waitKey(0) # waits for any key to be pressed to continue the logic of the program
# this is what actually allows you to "display" an image without it immediately disappearing.
I believe you can click on anywhere in the pic and it would return to the code window
I am using OpenCV in python and the aim of the code is to display one image after another in the same window without destroying it. For eg. i1.jpg is displayed and then in the same window left arrow is displayed after a pause of 5s.
In my case, i1.jpg is displayed and then the window is destroyed and then i2.jpg is displayed in another window.
Here is the code for the same -
t_screen_time = 5000
import numpy
import cv2
left_arrow = "left_arrow.jpg"
right_arrow = "right_arrow.jpg"
img = cv2.imread(left_arrow)
cv2.imshow('image',img)
cv2.waitKey(t_screen_time)
cv2.destroyAllWindows()
img = cv2.imread(right_arrow)
cv2.imshow('image',img)
cv2.waitKey(t_screen_time)
cv2.destroyAllWindows()
The argument in cv2.waitKey() is the time to wait for a keypress and not exactly the time the image is displayed for.
cv::imshow() or cv2.imshow() was not designed to be a complete GUI. It was designed to let you quickly debug and display images/videos.
You can achieve what you need using some form of sleep() in a thread or so. But this is harder to do in python. You could also just edit your code to
t_screen_time = 5000
import numpy
import cv2
left_arrow = r"first/image"
right_arrow = r"second/image"
img = cv2.imread(left_arrow)
cv2.imshow('image',img)
cv2.waitKey(t_screen_time)
img = cv2.imread(right_arrow)
cv2.imshow('image',img)
cv2.waitKey(t_screen_time)
cv2.destroyAllWindows()
by removing the cv2.destroyAllWindows() before displaying the second image. I've tested this code and it works, but if you're looking for more GUI functionality, use something like Qt.
ENVIRONMENT
OS- mint Linux,
using opencv3.1,using spyder through anaconda
ISSUE
The code mentioned below opens a window of name frame and display the video captured through laptop camera.But when I press 'q', as mentioned in code, it should stop and terminate the window. But,here the window stops to display any further frames captured and do not terminates.then manually I force Quit the process.
What is the problem, why is it not terminating the window?
CODE:-
import cv2
import numpy as np
cap = cv2.VideoCapture(0)
while(True):
ret, frame = cap.read()
cv2.imshow('frame',frame)
if cv2.waitKey(1) & 0xFF == ord('q'):
break
cap.release()
cv2.destroyAllWindows()
There is an open bug with this issue:
https://github.com/opencv/opencv/issues/7343
There are also similar questions without a good solution:
opencv videocapture hangs/freeze when camera disconnected instead of returning "False"
Try the solutions here: DestroyWindow does not close window on Mac using Python and OpenCV Calling several times waitKey seems to work for many people. You can try without the release() as well
I use macOS BigSur and also had this issue, I ended my code with the lines below and had no problem later:
video = cv.VideoCapture("your_video.mp4") # or 0 for your camera
while(video.isOpened()):
ret, frame = video.read()
if ret:
# Your frame manipulations
if cv.waitKey(1) & 0xFF == ord('q'):
video.release()
cv.waitKey(0)
cv.destroyAllWindows()
break
else:
break
video.release()
cv.waitKey(0)
cv.destroyAllWindows()
This will destroy the freezed window of the video but you have to press 3 times Q. One por stopping the video, one more for closing the window and one last for releasing the kernel if you're running on the Jupiter Notebook.
I also recommend to restart and clear all outputs in the kernel tab after applying the code because it could not work if so.
apparently this solves the issue, just include this line on top:
import pyautogui
I'm using opencv 2.4.7 on ubuntu 12.04. I'm programming with python and I have a problem when i run this script:
import cv2
img = cv2.imread('347620923614738322_233985812.jpg')
cv2.namedWindow("window")
cv2.imshow("window", img)
cv2.waitKey(0)
The problem is that the script doesn't stop when I close the image. I searched information about waitKey and I found that using cv2.waitKey(0) is correct.
I don't understand, where is the problem?
I found that it works if i press the key whilst the window is in focus. If the command line is in focus then nothing happens
Adding a cv2.waitKey(1) after you destroy the window should work in this case.
cv2.imshow('imgae',img)
cv2.waitKey(0)
cv2.destroyAllWindows()
cv2.waitKey(1)
This code works for me from IDLE:
# -*- coding: utf-8 -*-
# Objectif : découvrir le fonctionnement d'opencv-python
# http://opencv-python-tutroals.readthedocs.org/en/latest/index.html
import numpy as np
import cv2
# Load an color image in grayscale
img = cv2.imread('Lena.tiff',0)
WINDOW_NAME = 'Image de Lena'
cv2.namedWindow(WINDOW_NAME, cv2.CV_WINDOW_AUTOSIZE)
cv2.startWindowThread()
# Display an image
cv2.imshow(WINDOW_NAME,img)
cv2.waitKey(0)
cv2.destroyAllWindows()
Hope this helps for future readers.
click on the image window(active) and then press and key, don't write in the terminal window.
Here a minimalistic code for best performance on all platforms:
import cv2
img = cv2.imread("image.jpg")
cv2.imshow("Window", img)
cv2.waitKey(0)
cv2.destroyAllWindows()
And now some observations:
When the user wants to close the window through the press of the 0 key, he/she has to make sure that the 0 key is pressed whilst the window is in focus. Because as stated above, if the terminal is in focus nothing happens and code execution stucks at the cv2.waitKey(0) until the 0 key is pressed properly whilst the window is in focus.
Pressing the 0 key whilst the window is in focus is the right way to close the window and make sure that, once the window is destroyed in line cv2.destroyAllWindows() and the program ends, the user can get back the control of the terminal.
If the window is exited by mouse click, the window will be destroyed yes, but the user will very much end up in the situation of not being able to get back the control of the terminal. In this kind of situation the user may want to shut down the unresponsive terminal and open a new one.
Try to execute the script directly from the Terminal works 100% for me but not from an IDE for example , i explain :
I'm using fedora 20 and got the same problem, copying the first example from official opencv python tutorial, i'm using :
Fedora 20 64bit
Spyder IDE for python
Python Version 2.7.5
Fedora 64 bit
OpenCV 2.4.7
Here is the code for test
import cv2
img = cv2.imread('/path/image1.jpeg',0)
cv2.imshow('Display',img)
cv2.waitKey(0)
cv2.destroyAllWindows()
When running this script using F5 from Spyder, it runs it using the embedded python terminal with this line :
runfile('/home/user/Workspace/test.py', wdir=r'/home/user/Workspace')
In this instance, cv2.waitKey(0) or cv2.waitKey(-1) are not working and windows remains opened after pressing keys with the code of the example
Trying to close the windows will result in a "Not Responding , Force to Quit" Alert
But when executing the script from Terminal , it works 100%
didn't found the problem origin , will update if i find it.
Solved in Spyder under Ubuntu by following [Run]->[Configuration per file]->[Execute in an external system terminal].
Well the use cv2.waitKeyEx(0).
It runs in the same way and waits for your response until you revoke it.
I hope it helps.
Nithesh varmma
cv2.waitKey(0) means that script is in infinity loop with 0 miliseconds wait after loop
.only specified key can stop it.
you did not specified end of app condition.
Try this code:
Using other keys for the waitKey() function of opencv
There is a problem with unix based system running opencv programs from python notebooks.
Check this alternate method My suggestion is to run code in python in terminal. You will not face any kind of problem
Copy the same code and save with filename.py
import cv2
input = cv2.imread('path_to_image.png')
cv2.imshow('Hello World', input)
cv2.waitKey(0)
cv2.destroyAllWindows()
then open specific directory and then open terminal
Steps:
Open Terminal
cd path/to/filename.py
source activate YOURPROFILE
python filename.py
This will solve problem
https://youtu.be/8O-FW4Wm10s
This will work even if you close the window using the cross button on the window.
import numpy as np
import cv2
img = cv2.imread('arvid.jpg', 0)
cv2.namedWindow('image', cv2.WINDOW_NORMAL)
cv2.imshow('image', img)
while True:
k = cv2.waitKey(30) & 0xFF
if k == 27: # wait for ESC key to exit
cv2.destroyAllWindows()
elif k == ord('s'): # wait for 's' key to save and exit
cv2.imwrite('arvid2.jpg', img)
cv2.destroyAllWindows()
if cv2.getWindowProperty("image", 0) == -1:
break
This problem occurs in some earlier version of opencv.
So you just need to update opencv to the latest version. Version 4.0.0.21 worked for me.
Use the command below.
update opencv to version 4.0.0.21.