Consider:
def fix_county_string(s):
""" Insert Docstring """
fp = open("michigan_COVID_08_24_21.txt", "r")
fp.readline()
for line in fp:
county = line[24:43]
x = county.split()
t = x.pop(-1)
s = x.append("County")
return s
fix_county_string(s)
The parameter is s, a string. Every county name ends with the places; if it correctly ends in places, do nothing (simply return s). Otherwise, correct the ending word to be place. Specifically, if not, fix it.
Use:
def fix_county_string():
""" Insert Docstring """
fp = open("michigan_COVID_08_24_21.txt", "r")
s = ''
for line in fp:
county = line[24:43]
x = county.split()
t = x.pop(-1)
x.append("County")
s += line + ' '.join(x)
return s
s = fix_county_string()
I think this is what you are trying to do. You can write back the output in a file.
Related
I'm learning python so I am pretty new to it.
I've been working on a class assignment and iv'e been facing some error, such as the one in the title.
This is my code:
import random
def getWORDS(filename):
f = open(filename, 'r')
templist = []
for line in f:
templist.append(line.split("\n"))
return tuple(templist)
articles = getWORDS("articles.txt")
nouns = getWORDS("nouns.txt")
verbs = getWORDS("verbs.txt")
prepositions = getWORDS("prepositions.txt")
def sentence():
return nounphrase() + " " + verbphrase()
def nounphrase():
return random.choice(articles) + " " + random.choice(nouns)
def verbphrase():
return random.choice(verbs) + " " + nounphrase() + " " + \
prepositionalphrase()
def prepositionalphrase():
return random.choice(prepositions) + " " + nounphrase()
def main():
number = int(input("enter the number of sentences: "))
for count in range(number):
print(sentence())
main()
However, whenever I run it I get an this error:
TypeError: can only concatenate list (not "str") to list.
Now, I know there are tons of question like this but I tried a lot of time, I am not able to fix it, I'm new to programming so I've been learning the basics since last week.
Thank you
Here I've modified the function slightly - it'll fetch every words into a tuple. Use with to open the files - it will close the pointer once the values have been fetched.
I hope this will work for you!
def getWORDS(filename):
result = []
with open(filename) as f:
file = f.read()
texts = file.splitlines()
for line in texts:
result.append(line)
return tuple(result)
I think the problem is in this line:
templist.append(line.split("\n"))
split() will return a list that is then appended to templist. If you're wanting to remove the newline character from the end of the line use rstrip() as this will return a string.
When working with a file, you should use the read() method:
file = f.read()
To split the file to lines and add to a list, you first split, then append line by line.
file = f.read()
lines = file.split("\n")
for line in lines:
templist.append(line)
In your case, you are using the list of lines as-is, so I would write:
file = f.read()
templist = file.split("\n")
Edit 1:
Another useful tool when working with files is f.readline(), which returns the first line when calling it for the first time, second when calling it once again... third... and so on, although the previous ways I showed would be more efficient here.
Edit 2:
When you are done using the file, use the close() method, or start using the file with a with ... as method which closes the file at the end of the code block.
Code example using with ... as (The best written code in this answer):
def getWORDS(filename):
with open(filename, 'r') as f:
file = f.read()
templist = file.split("\n")
return tuple(templist)
Code example using close():
def getWORDS(filename):
f = open(filename, 'r')
file = f.read()
templist = file.split("\n")
f.close()
return tuple(templist)
This is how I would write the full code.
(fixed file opening and reading + fixed capitalization)
import random
def getWORDS(filename):
with open(filename, 'r') as f:
file = f.read()
templist = file.split("\n")
return tuple(templist)
articles = getWORDS("articles.txt")
nouns = getWORDS("nouns.txt")
verbs = getWORDS("verbs.txt")
prepositions = getWORDS("prepositions.txt")
def sentence():
sentence = nounphrase() + " " + verbphrase()
sentence = sentence.split(" ")
sentence[0] = sentence[0].capitalize()
sentence = " ".join(sentence)
return sentence
def nounphrase():
return random.choice(articles).lower() + " " + random.choice(nouns).capitalize()
def verbphrase():
return random.choice(verbs).lower() + " " + nounphrase() + " " + \
prepositionalphrase()
def prepositionalphrase():
return random.choice(prepositions).lower() + " " + nounphrase()
def main():
number = int(input("enter the number of sentences: "))
for count in range(number):
print(sentence())
main()
I have had a look at answers to similar questions but I just can't make this work. I am quite new to python.
def read():
set = []
f = open("error set 1.txt", "r")
replace = f.read()
f.close()
f = open("Test1_Votes.txt", "w")
replaced = replace.replace(",", "")
f.write(replaced)
f.close()
f = open("Test1_Votes.txt", "r")
for line in f:
ballot = []
for ch in line:
vote = ch
ballot.append(vote)
print (ballot)
set.append(ballot)
"""print(set)"""
remove()
def remove():
for i in range (70):
x = i - 1
check = set[x]
if 1 not in check:
set.remove[x]
print(set)
The error is line 37, check = set[x]
I'm unsure of what is actually causing the error
In the remove function, you have not defined set. So, python thinks it's the built-in object set, which is actually not subscriptable.
Pass your object to the remove function, and, preferably, give it another name.
Your remove function cant "see" your set variable (which is list, avoid using reserved words as variable name), because its not public, its defined only inside read function.
Define this variable before read function or send it as input to remove function, and it should be working.
def read():
set = []
f = open("error set 1.txt", "r")
replace = f.read()
f.close()
f = open("Test1_Votes.txt", "w")
replaced = replace.replace(",", "")
f.write(replaced)
f.close()
f = open("Test1_Votes.txt", "r")
for line in f:
ballot = []
for ch in line:
vote = ch
ballot.append(vote)
print (ballot)
set.append(ballot)
"""print(set)"""
remove(set)
def remove(set):
for i in range (70):
x = i - 1
check = set[x]
if 1 not in check:
set.remove(x)
print(set)
Here is my function. Trying to get this all to print to one line.
Here is the output ->
config::$var['pdf']['meta']['staff_member_name']
= ";"
The = ";" portion of the string prints to a new line in the console for some reason?
This is totally just a personal hack to help with a repetitious job requirement so i'm not looking for anything fancy.
Here is my function ->
def auto_pdf_config(file):
with open(file) as f:
content = f.readlines()
kill = " = array("
start = "config::$var['intake']"
new_line = ""
for line in content:
if kill not in line:
pass
elif start in line:
new_line = line
x = new_line.replace(kill, "")
y = x.replace(start,"")
pdf_end = ' = ";" '
z = "config::$var['pdf']['meta']{}{}".format(y,pdf_end)
print(z)
it seems you "y" variable has new line in it. you can try to strip it off.
y = x.replace(start,"").strip('\n')
Since x = new_line.replace(kill, ""), y = x.replace(start,""), and new_line is the line of content, it contains endline symbol (\n), that's why this endline symbol is appended before pdf_end. You just need to remove endline symbol from y.
You can do something like that:
y = y.strip('\n')
I'm in trouble here. I need to read a file. Txt file that contains a sequence of records, check the records that I want to copy them to a new file.
The file content is like this (this is just an example, the original file has more than 30 000 lines):
AAAAA|12|120 #begin file
00000|46|150 #begin register
03000|TO|460
99999|35|436 #end register
00000|46|316 #begin register
03000|SP|467
99999|33|130 #end register
00000|46|778 #begin register
03000|TO|478
99999|33|457 #end register
ZZZZZ|15|111 #end file
The records that begin with 03000 and have the characters 'TO' must be written to a new file. Based on the example, the file should look like this:
AAAAA|12|120 #begin file
00000|46|150 #begin register
03000|TO|460
99999|35|436 #end register
00000|46|778 #begin register
03000|TO|478
99999|33|457 #end register
ZZZZZ|15|111 #end file
Code:
file = open("file.txt",'r')
newFile = open("newFile.txt","w")
content = file.read()
file.close()
# here I need to check if the record exists 03000 characters 'TO', if it exists, copy the recordset 00000-99999 for the new file.
I did multiple searches and found nothing to help me.
Thank you!
with open("file.txt",'r') as inFile, open("newFile.txt","w") as outFile:
outFile.writelines(line for line in inFile
if line.startswith("03000") and "TO" in line)
If you need the previous and the next line, then you have to iterate inFile in triads. First define:
def gen_triad(lines, prev=None):
after = current = next(lines)
for after in lines:
yield prev, current, after
prev, current = current, after
And then do like before:
outFile.writelines(''.join(triad) for triad in gen_triad(inFile)
if triad[1].startswith("03000") and "TO" in triad[1])
import re
pat = ('^00000\|\d+\|\d+.*\n'
'^03000\|TO\|\d+.*\n'
'^99999\|\d+\|\d+.*\n'
'|'
'^AAAAA\|\d+\|\d+.*\n'
'|'
'^ZZZZZ\|\d+\|\d+.*')
rag = re.compile(pat,re.MULTILINE)
with open('fifi.txt','r') as f,\
open('newfifi.txt','w') as g:
g.write(''.join(rag.findall(f.read())))
For files with additional lines between lines beginning with 00000, 03000 and 99999, I didn't find simpler code than this one:
import re
pat = ('(^00000\|\d+\|\d+.*\n'
'(?:.*\n)+?'
'^99999\|\d+\|\d+.*\n)'
'|'
'(^AAAAA\|\d+\|\d+.*\n'
'|'
'^ZZZZZ\|\d+\|\d+.*)')
rag = re.compile(pat,re.MULTILINE)
pit = ('^00000\|.+?^03000\|TO\|\d+.+?^99999\|')
rig = re.compile(pit,re.DOTALL|re.MULTILINE)
def yi(text):
for g1,g2 in rag.findall(text):
if g2:
yield g2
elif rig.match(g1):
yield g1
with open('fifi.txt','r') as f,\
open('newfifi.txt','w') as g:
g.write(''.join(yi(f.read())))
file = open("file.txt",'r')
newFile = open("newFile.txt","w")
content = file.readlines()
file.close()
newFile.writelines(filter(lambda x:x.startswith("03000") and "TO" in x,content))
This seems to work. The other answers seem to only be writing out records that contain '03000|TO|' but you have to write out the record before and after that as well.
import sys
# ---------------------------------------------------------------
# ---------------------------------------------------------------
# import file
file_name = sys.argv[1]
file_path = 'C:\\DATA_SAVE\\pick_parts\\' + file_name
file = open(file_path,"r")
# ---------------------------------------------------------------
# create output files
output_file_path = 'C:\\DATA_SAVE\\pick_parts\\' + file_name + '.out'
output_file = open(output_file_path,"w")
# create output files
# ---------------------------------------------------------------
# process file
temp = ''
temp_out = ''
good_write = False
bad_write = False
for line in file:
if line[:5] == 'AAAAA':
temp_out += line
elif line[:5] == 'ZZZZZ':
temp_out += line
elif good_write:
temp += line
temp_out += temp
temp = ''
good_write = False
elif bad_write:
bad_write = False
temp = ''
elif line[:5] == '03000':
if line[6:8] != 'TO':
temp = ''
bad_write = True
else:
good_write = True
temp += line
temp_out += temp
temp = ''
else:
temp += line
output_file.write(temp_out)
output_file.close()
file.close()
Output:
AAAAA|12|120 #begin file
00000|46|150 #begin register
03000|TO|460
99999|35|436 #end register
00000|46|778 #begin register
03000|TO|478
99999|33|457 #end register
ZZZZZ|15|111 #end file
Does it have to be python? These shell commands would do the same thing in a pinch.
head -1 inputfile.txt > outputfile.txt
grep -C 1 "03000|TO" inputfile.txt >> outputfile.txt
tail -1 inputfile.txt >> outputfile.txt
# Whenever I have to parse text files I prefer to use regular expressions
# You can also customize the matching criteria if you want to
import re
what_is_being_searched = re.compile("^03000.*TO")
# don't use "file" as a variable name since it is (was?) a builtin
# function
with open("file.txt", "r") as source_file, open("newFile.txt", "w") as destination_file:
for this_line in source_file:
if what_is_being_searched.match(this_line):
destination_file.write(this_line)
and for those who prefer a more compact representation:
import re
with open("file.txt", "r") as source_file, open("newFile.txt", "w") as destination_file:
destination_file.writelines(this_line for this_line in source_file
if re.match("^03000.*TO", this_line))
code:
fileName = '1'
fil = open(fileName,'r')
import string
##step 1: parse the file.
parsedFile = []
for i in fil:
##tuple1 = (1,2,3)
firstPipe = i.find('|')
secondPipe = i.find('|',firstPipe+1)
tuple1 = (i[:firstPipe],\
i[firstPipe+1:secondPipe],\
i[secondPipe+1:i.find('\n')])
parsedFile.append(tuple1)
fil.close()
##search criterias:
searchFirst = '03000'
searchString = 'TO' ##can be changed if and when required
##step 2: used the parsed contents to write the new file
filout = open('newFile','w')
stringToWrite = parsedFile[0][0] + '|' + parsedFile[0][1] + '|' + parsedFile[0][2] + '\n'
filout.write(stringToWrite) ##to write the first entry
for i in range(1,len(parsedFile)):
if parsedFile[i][1] == searchString and parsedFile[i][0] == searchFirst:
for j in range(-1,2,1):
stringToWrite = parsedFile[i+j][0] + '|' + parsedFile[i+j][1] + '|' + parsedFile[i+j][2] + '\n'
filout.write(stringToWrite)
stringToWrite = parsedFile[-1][0] + '|' + parsedFile[-1][1] + '|' + parsedFile[-1][2] + '\n'
filout.write(stringToWrite) ##to write the first entry
filout.close()
I know that this solution may be a bit long. But it is quite easy to understand. And it seems an intuitive way to do it. And I have already checked this with the Data that you have provided and it works perfectly.
Please tell me if you need some more explanation on the code. I will definitely add the same.
I tip (Beasley and Joran elyase) very interesting, but it only allows to get the contents of the line 03000. I would like to get the contents of the lines 00000 to line 99999.
I even managed to do here, but I am not satisfied, I wanted to make a more cleaner.
See how I did:
file = open(url,'r')
newFile = open("newFile.txt",'w')
lines = file.readlines()
file.close()
i = 0
lineTemp = []
for line in lines:
lineTemp.append(line)
if line[0:5] == '03000':
state = line[21:23]
if line[0:5] == '99999':
if state == 'TO':
newFile.writelines(lineTemp)
else:
linhaTemp = []
i = i+1
newFile.close()
Suggestions...
Thanks to all!
I have a plain text file with some data in it, that I'm trying to open and read using a Python (ver 3.2) program, and trying to load that data into a data structure within the program.
Here's what my text file looks like (file is called "data.txt")
NAME: Joe Smith
CLASS: Fighter
STR: 14
DEX: 7
Here's what my program looks like:
player_name = None
player_class = None
player_STR = None
player_DEX = None
f = open("data.txt")
data = f.readlines()
for d in data:
# parse input, assign values to variables
print(d)
f.close()
My question is, how do I assign the values to the variables (something like setting player_STR = 14 within the program)?
player = {}
f = open("data.txt")
data = f.readlines()
for line in data:
# parse input, assign values to variables
key, value = line.split(":")
player[key.strip()] = value.strip()
f.close()
now the name of your player will be player['name'], and the same goes for all other properties in your file.
import re
pattern = re.compile(r'([\w]+): ([\w\s]+)')
f = open("data.txt")
v = dict(pattern.findall(f.read()))
player_name = v.get("name")
plater_class = v.get('class')
# ...
f.close()
The most direct way to do it is to assign the variables one at a time:
f = open("data.txt")
for line in f: # loop over the file directly
line = line.rstrip() # remove the trailing newline
if line.startswith('NAME: '):
player_name = line[6:]
elif line.startswith('CLASS: '):
player_class = line[7:]
elif line.startswith('STR: '):
player_strength = int(line[5:])
elif line.startswith('DEX: '):
player_dexterity = int(line[5:])
else:
raise ValueError('Unknown attribute: %r' % line)
f.close()
That said, most Python programmers would stored the values in a dictionary rather than in variables. The fields can be stripped (removing the line endings) and split with: characteristic, value = data.rstrip().split(':'). If the value should be a number instead of a string, convert it with float() or int().