I started having this issue a while ago, when I used pip to install new things. Every time I try to use pip, my command line says: failed to create process. I have checked the system PATH for my Python folder and it seems to be correct. I have tried uninstalling and reinstalling pip several times. I reinstalled Python as well.
Pip commands do work when I put the full path to pip in the command, but I would rather just type pip whatever than pip "C:/path to it" or whatever. Anyone got any fixes or ideas?
I have checked other places where this was answered, and none of the suggestions helped.
Try this & again check path in environment
python -m pip install --upgrade pip --force-reinstall
Related
Any time i try to install anything with pip i would get this type of error. I've updated my computer, updated visual studios, pip 20.0.2, python 3.8.2, and still nothing works, I've even tried reinstalling everything.
ERROR: https://i.stack.imgur.com/m8Yqv.png
You need to install PortAudio on your system to use one of the libraries you're trying to install.
try using pip3 instead of pip or check paths
I am new to Stack Overflow, so please forgive me for any errors.
I am trying to install Jupyter on my Windows 10 machine using command prompt. I have already installed Python(3.8.0).
I receive the following error at the end:
The package setup script has attempted to modify files on your system
that are not within the EasyInstall build area, and has been aborted.
This package cannot be safely installed by EasyInstall, and may not
support alternate installation locations even if you run its setup
script by hand. Please inform the package's author and the EasyInstall
maintainers to find out if a fix or workaround is available.
The installation starts, download the necessary file but suddenly there's a long list of error with the above message at the end. I have tried running command prompt as administrator but that also fails.
I have tried executing following commands for installation but nothing works:
> pip install jupyter
> python3 -m pip install --upgrade pip
python3 -m pip install jupyter
> pip install jupyterlab
Can someone tell me why this is happening? And how do I solve it?
Thank You!
I am on Windows 10, and using Pyhton 3.8. Running first
pip install setuptools --upgrade
and then
pip install notebook
worked for me quite well. Thanks to #roberto
Check the answer here.
I need to install virtualenvwrapper on my macOS Sierra to be able to install TensorFlow. Previously I had installed Python 3 based on the instructions here using Homebrew.
Now pip seemed to be nonexistent (pip2 and pip3 worked though), so I did
sudo easy_install pip
Then I followed the instructions given here, and when I do
source /usr/local/bin/virtualenvwrapper.sh
I get the following error:
No module named virtualenvwrapper virtualenvwrapper.sh:
There was a problem running the initialization hooks.
If Python could not import the module virtualenvwrapper.hook_loader,
check that virtualenvwrapper has been installed for
VIRTUALENVWRAPPER_PYTHON=/usr/bin/python and that PATH is set properly.
I have tried the solutions given here, and here, but no success. I have even tried to install virtualenvwrapper with:
sudo pip2 install --upgrade virtualenvwrapper
and
sudo pip3 install --upgrade virtualenvwrapper
and still I get the same error. Could someone please help me with this issue?
EDIT:
I have tried to do lazy loading of the virtualenvwrapper like so:
export WORKON_HOME=$HOME/.virtualenvs
export VIRTUALENVWRAPPER_SCRIPT=/usr/local/bin/virtualenvwrapper.sh
source /usr/local/bin/virtualenvwrapper_lazy.sh
Only then I don't get any errors, and I am able to proceed with installing TensorFlow. But then every time I open a new terminal workon does not work, and I have to do source /usr/local/bin/virtualenvwrapper_lazy.sh every time to be able to use workon. Even when workon is invoked I get a warning/error message as /usr/bin/python: No module named virtualenvwrapper.
Could someone help me see what is going on here?
My solution is simply a hack and not a clean and logical way for solving this but you could edit /usr/local/bin/virtualenvwrapper.sh as root and in the section that is followed by
# Locate the global Python where virtualenvwrapper is installed.
remove the if/else condition and simply use
VIRTUALENVWRAPPER_PYTHON="$(command \which python3.5)" (Change 3.5 to your version) and then source the file again.
After following this article: How do I install pip on Windows? on my Windows system using Enthought Canopy 64 Bit system, I cannot get pip or easy_install to work due to error:
pip install requests
failed to create process
I tried re-installing setuptools, running cmd prompt as admin without any effect.
When I encountered this, it was because I'd manually renamed the directory python was in. This meant that both setuptools and pip had to be reinstalled. Or, I had to manually rename the python directory to what it had been previously.
It will help after changing the PATH to python in environment variables:
python -m pip install --upgrade pip --force-reinstall
Just ran into this. Sort of. Pip worked for me, but after installing pytest-watch, running the ptw script was giving this error.
For some reason, pip stopped quoting the #! in ptw-script.py:
#!C:\Program Files (x86)\Python\python.exe
It worked after I added quotes manually:
#!"C:\Program Files (x86)\Python\python.exe"
I don't really know why this suddenly started happening. Adding this here in case anyone else coming here from Google runs into the same thing.
Here's a related pip issue (I think).
If you intentionally want to rename the folder where python.exe resides, you should also modify all python files in the Scripts folder. So a third solution would be to modify the python files as well: the first line in pip-2.7-script.py originally contain:
#!C:\OriginalPythonDir\python.exe
Modifying this path to the new Python folder fixes the problem.
(P.S. Unfortunately I cannot yet reply to answers, so I'll reply as a new answer because I thought it could be useful for other people as well).
To fix this error (after you change the folder where python is installed) run force-reinstall for pip and pyinstaller, like this:
python -m pip install --upgrade pip --force-reinstall
python -m pip install --upgrade pyinstaller --force-reinstall
I ran into this bug while installing an older version of Python (3.5.2) for compatibility with some aws-adfs scripting. I installed aws-adfs with pip, on Windows 10, and found that while Python is installed to a directory path with spaces in it you will get the failed to create process error.
The pip maintainers say that it was a deeper problem with setuptools and even offered a workaround if you want to patch the installation in place.
But another, easier solution if you're working with older versions of Python is just to reinstall Python to a directory without spaces.
When I came across this problem, I found that my path contained multiple entries for Python. After tidying up my path so that it had an entry for the python installation folder and the scripts folder (in my case C:\Python27 and C:\Python27\Scripts), pip worked properly.
Test this. it's worked correctly for me:
python -m pip install --upgrade pip --force-reinstall
I just use python in the command shell on Windows 7 and had this problem immediately after installing pip. In case the above solutions don't help you, you should check that the folder that pip.exe is installed in (in my case, the Script folder under Python32) is in the Path.
I had installed Anaconda and so I still had C:\Python27 along with C:\Anaconda in my path. When I removed C:\Python27 and all subfolders I was able to use pip again.
Please check out have you ever rename your python.exe
I install python2 and python3 on my PC at the same time , so I rename my python.exe to python3.exe.And when I use pip ,it boom...
After rename it back .It's ok again....
Running command prompt with administrator privileges worked for me.
I had the same problem and none of the above worked for me.
I deleted my venv. And created a new one by specifying the python path:
virtualenv --python C:\Path\To\Python\python.exe venv
.\venv\Scripts\activate
and this worked
Check whether the pip-script points out the exact location of python.exe, because pip always points (C:\python3.3\python.exe). In my system i've installed 2 versions of python i.e python2 & python3. I ve modified the home application of python.exe into python2.exe and python3.exe.
When i installed pip windows installer. it results me out with the error " failed to create process"
I recently installed python 2.7.2 on my Mac running OSX 10.6.8. Previously, I had version 2.6. I set my path in .bash_profile as follows:
export PATH=/usr/local/bin:$PATH
export PATH=/usr/local/share/python:$PATH
so that when I run python it will refer to my new installation. It does.
I would also like to use pip with my new installation, but the problem is that I already have the current version of pip installed at
/usr/local/bin/pip.
I tried to re-install pip with:
easy_install pip
But, of course this does not put pip in the desired new directory
/usr/local/share/python/pip
but simply refers to the existing version in /usr/local/bin/pip.
Can someone tell me how to fix this?
I would like to then use pip to install NumPy and SciPy in the correct directory (I was having trouble getting the SciPy installation to work with my old version of python, hence the new install).
If you'd like, you can visit the website where I found instructions for installing python 2.7, creating/updating my .bash_profile, installing pip, and NumPy and SciPy. Might provide some insight, or I'm happy to give more details if needed. Thanks!
http://www.thisisthegreenroom.com/2011/installing-python-numpy-scipy-matplotlib-and-ipython-on-lion/#python
Install distribute as per the instructions at http://pypi.python.org/pypi/distribute .
Make sure you specify the full path to the python executable (/usr/local/share/python/python or smth in your case).
$ curl -O https://svn.apache.org/repos/asf/oodt/tools/oodtsite.publisher/trunk/distribute_setup.py
$ /usr/local/share/python/python distribute_setup.py
Then you should have /usr/local/share/python/easy_install.
After that, run:
$ /usr/local/share/python/easy_install pip
Then you should have /usr/local/share/python/pip.
Depending on the ordering of things in your PATH, either your old, or the newly installed pip is executed when you execute the pip command, so you either might have to adapt your PATH, or specify the full path to /usr/local/share/python/pip when installing eggs.
(shameless plug:
In any case, you might consider using virtualenv for installing packages into a "project" specific isolated environment, as opposed to installing them globally.)
I needed to uninstall brew's python.
Then, I was left with python v2.7.6
Next to install, pip I ran
sudo easy_install pip
installed fine and working
I had a similar issue, try this:
$ python -m pip install --upgrade --force-reinstall pip
This will force reinstall pip with whatever version of python you use including installing the binary.
A few days ago I had a friend who was starting Python Programming and needed help with the same issue: installing pip. There are debates over which one to choose between easy_install and pip and it seems everybody is heading the pip direction. Either way, installing either of them can be frustrating.
You can use this simple tutorial : installing pip package manager the easy way
Here are what you should keep in mind as you follow the above guide:
If you already have an older version installed, uninstall it or totally remove the python installation
Once that is cleared, download an install Python.
After that, download ez_setup.py file and save it to your desktop - easily accessible from the command line
Now run it from the command line and it will install easy_install for you after which,
You can use it to install pip.
Once again, you can do this or use the above link to find a simple step-by-step guide on how to get it installed on your computer.
Good luck.
Just so that people knew, ATM we can install PIP by downloading get-pip.py from the page with docs and run it like this:
c:\python27\python.exe get-pip.py
BTW, Python 3.4 comes with PIP pre-installed.
One of the command line options lets you choose where to install to.
--install-dir (-d) install package to DIR
So something like - # easy_install pip -d /usr/local/share/python
(Please correct me if I'm wrong.)
Just wanted to say that I found a way to get around my problem. I don't know that I can explain it perfectly, since I am not very good at understanding what I am doing with this stuff just yet! But, the problem seems to have been with my PATH. I removed the PATH that I posted in my original question, and then used easy_install pip. It went straight to python 2.7.2 (my new version) with no problem. I then successfully used pip to install NumPy and SciPy in the correct location, and they both work. Thanks to ErikAllik and FakeRainBrigand for taking the time to look into it!