With Python code that uses the
python-oracledb driver:
import oracledb
import os
un = os.environ.get("PYTHON_USERNAME")
pw = os.environ.get("PYTHON_PASSWORD")
cs = "localhost/doesnotexist"
c = oracledb.connect(user=un, password=pw, dsn=cs)
what does this error message mean?
DPY-6001: cannot connect to database. Service "doesnotexist" is not registered with the listener at host "localhost" port 1521. (Similar to ORA-12514)
The error means that Python successfully reached a computer (in this case
"localhost" using the default port 1521) that is running a database. However
the database service you wanted ("doesnotexist") doesn't exist there.
Technically the error means the listener doesn't know about the service at the
moment. So you might also get this error if the DB is currently restarting.
This error is similar to the ORA-12514 error that you would see when connecting
with python-oracledb in Thick mode, or might see with some other Oracle tools.
The solution is to use a valid service name, for example:
cs = "localhost/xepdb1"
You can:
Check and fix any typos in the service name you used
Check the hostname and port are correct
Ask your DBA for the correct values
Wait a few moments and re-try in case the DB is restarting
Review the connection information in your cloud console or cloud wallet, if you are using a cloud DB
Run lsnrctl status on the database machine to find the known service names
I am trying to build a tunnel to then connect to an Oracle DB, but tunnel cannot be opened. Error is the following:
ERROR | Problem setting SSH Forwarder up: Couldn't open tunnel localhost:1521 <> XXXXXXXXX:1521 might be in use or destination not reachable.
sshtunnel.HandlerSSHTunnelForwarderError: An error occurred while opening tunnels.
My code is set as:
self.tunnel = sshtunnel.SSHTunnelForwarder((conn_data['gateway'], int(conn_data['gateway_port'])),
ssh_username=conn_data['username'],
ssh_password=password,
remote_bind_address=(conn_data['remote_bind'],
int(conn_data['remote_port'])),
local_bind_address=(conn_data['local_bind'],
int(conn_data['local_port'])))
The code works fine if I am inside the network of the company I work for. But if I am connected through VPN, I get the above error. My guess is that the VPN is built over the same tunnel.
I tried changing the local_port and removing the local bind, but if I do that, I get the error:
cx_Oracle.DatabaseError: ORA-12541: TNS:no listener
So, how can I dynamically set the port of SSHTunnelForwarder so it can access my DB through my already set VPN?
Note: changing the VPN's configuration or not using it is not an option.
Problem solved. The issue was that my VPN was using the same port as me (which caused the first error), and my Oracle connection was pointing to this port also (what caused error ORA-12541).
To solve it, I had to change conn_data['local_port'] to another port and set the port of my oracle connection to this same port:
self.tunnel = sshtunnel.SSHTunnelForwarder((conn_data['gateway'],
int(conn_data['gateway_port'])),
ssh_username=conn_data['username'],
ssh_password=password,
remote_bind_address=(conn_data['remote_bind'], int(conn_data['remote_port'])),
local_bind_address=(conn_data['local_bind'], 1234))
self.connection.connect(conn_data['host'],
port=1234,
username=conn_data['username'],
password=password,
look_for_keys=False)
I'm trying to connect to a postgresql database using the following python code:
try:
conn = psycopg2.connect("host = '10.47.65.237' dbname = 'testDB' user = 'pi' password = 'raspberry'")
except:
print("Unable to connect to testDB at 10.47.65.237. Sending Alert.")
This code works with localhost 127.0.0.1 but when I go to a different machine and try to run it with its ip above it won't connect.
Things I've done:
1. Port 5432 is open
2. edited postgresql.conf by adding the line "listen_addresses='10.47.65.138'"
3. edited pg_hba.conf by adding the following configuration "host all all 10.47.65.138 md5"
Any other things I could try or I'm missing?
Running telnet 10.47.65.237 5432 on the client should result in a Connection Refused error, which indicates that the problem has nothing to do with psycopg2.
You have misconfigured the server. listen_addresses controls which IPs the server will answer on, not which IPs the server will permit connections from. Your server's postgresql.conf should have either listen_addresses='10.47.65.237' or listen_addresses='*'. Edit the configuration and restart PostgreSQL on the server, then you should be able to connect successfully using telnet and psycopg2.
I am trying to connect to the MusicBrainz database using the psycopg2 python's module. I have followed the instructions presented on http://musicbrainz.org/doc/MusicBrainz_Server/Setup, but I cannot succeed in connecting. In particular I am using the following little script:
import psycopg2
conn = psycopg2.connect( database = 'musicbrainz_db', user= 'musicbrainz', password = 'musicbrainz', port = 5000, host='10.16.65.250')
print "Connection Estabilished"
The problem is that when I launch it, it never reaches the print statement, and the console (I'm on linux) is block indefinitely. It does not even catches the ctrl-c kill, so I have to kill python itself in another console. What can cause this?
You seem to be mistaking MusicBrainz-Server to be only the database.
What's running on port 5000 is the Web Server.
You can access http://10.16.65.250:5000 in the browser.
Postgres is also running, but listens on localhost:5432.
This works:
import psycopg2
conn = psycopg2.connect(database="musicbrainz_db",
user="musicbrainz", password="musicbrainz",
port="5432", host="localhost")
print("Connection established")
In order to make postgres listen to more than localhost you need to change listen_addresses in /etc/postgresql/9.1/main/postgres.conf and make an entry for your (client) host or network in /etc/postgresql/9.1/main/pg_hba.conf.
My VM is running in a 192.168.1.0/24 network so I set listen_addresses='*' in postgres.conf and in pg_hab.conf:
host all all 192.168.1.0/24 trust
I can now connect from my local network to the DB in the VM.
Depending on what you actually need, you might not want to connect to the MusicBrainz Server via postgres. There is a MusicBrainz web service you can access in the VM.
Example:
http://10.16.65.250:5000/ws/2/artist/c5c2ea1c-4bde-4f4d-bd0b-47b200bf99d6.
In that case you might be interested in a library to process the data:
python-musicbrainzngs.
EDIT:
You need to set musicbrainzngs.set_hostname("10.16.65.250:5000") for musicbrainzngs to connect to your local VM.
I'm having an issue connecting to my local MySQL database using Python's MySQLdb library. The script has been working well previously, but I will occasionally get the MySQL error in the title. There seems to be no explanation for when the error occurs, and the script is always run from the same machine with the same arguments.
The MySQL server is running as a service on Windows XP SP3 using port 3306 (locally hosted phpMyAdmin works), and the script is run from an Ubuntu 10.04 guest operating system in Oracle VM VirtualBox.
I am currently working around this issue by opening a command prompt and executing 'net stop MySQL' then 'net start MySQL'. This allows me to run the script a few times again before resulting in the error, which I've been fixing by restarting the MySQL service.
As I am still making changes to the script, there are occasions when the script raises an exception and doesn't exit gracefully, though I do catch the exception and close the cursor and connection.
The code to connect to the database:
def __init__(self):
try:
print "Connecting to the MySQL database..."
self.conn = MySQLdb.connect( host = "192.168.56.1",
user = "guestos",
passwd = "guestpw",
db = "testdb")
self.cursor = self.conn.cursor(MySQLdb.cursors.DictCursor)
print "MySQL Connection OK"
except MySQLdb.Error, e:
print "MySQLdb error %d: %s" % (e.args[0],e.args[1])
raise
The full error generated when this happens is as follows:
MySQLdb error 2013: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
Traceback (most recent call last):
File "search.py", line 45, in <module>
dataHandler = DataHandler()
File "/home/guestos_user/workspace/Search/src/data_handler.py", line 25, in __init__
db = "testdb")
File "/usr/lib/pymodules/python2.6/MySQLdb/__init__.py", line 81, in Connect
return Connection(*args, **kwargs)
File "/usr/lib/pymodules/python2.6/MySQLdb/connections.py", line 170, in __init__
super(Connection, self).__init__(*args, **kwargs2)
_mysql_exceptions.OperationalError: (2013, "Lost connection to MySQL server at 'reading initial communication packet', system error: 0")
sudo vi /etc/mysql/my.cnf
delete
bind-address = 127.0.0.1
then
sudo reboot now
That's it. Be aware that this will make your mysql server less secure as you are exposing it.
I have seen this happen when child processes try to share the same mysql connection id (solution = create new connections for each child process). I'm not sure if this is also possible when sharing connection objects with multiple threads.
However, that's only one of the many possible causes. See VVS's answer in MySQL Error 2013 for a list of troubleshooting resources.
Do you have in your MySQL server an acount called guestos#YOURIPADDRESS?
You must have an account to access to your MySQL server from YOURIPADDRESS!
For example:
Your IP address is 192.168.56.2; then you must create and account if not exist to access.
mysql> create user guestos#192.168.56.2 identified by 'guestpw';
The problem fixed for me just by restarting my mac. Though there might be a more specific fix for it.
I received a similar error when attempting to connect to my MySQL server remotely through a user with the sufficient permissions.
After editing the /etc/mysql/my.cnf file to include
[mysqld]
bind-address=xx.xx.xxx.xxx
where xx.xx.xxx.xxx is my local IP address, I began experiencing the exact same error as you. From there, I found an answer regarding this issue (answered by Coffee Converter) which worked for me, and can be found here: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 on a windows machine
All I did to fix the issue for myself was edit the /etc/hosts.allow to include
mysqld: ALL: allow
Works great now! I hope this helped :)
Could you change the bind-address=localhost and restart MySQL server? Seems like this issue is related to yours: http://forums.mysql.com/read.php?152,355740,355742#msg-355742
Also this-
If MySQL port is wrong result is MySQL client error 2013 "Lost
connection ...". Note that this error also occurs if port forwarding
is disabled in SSH configuration (the configuration parameter
'AllowTcpForwarding' is set to 'no' in the 'sshd_config' file). It
(here) simply tells that there is no connection from SSH to MySQL for
some reason. But the mySQL client API 'thinks' there was one
connection and that is why is says 'Lost connection ...' and not
'Can’t connect...'. There was one successful connection - but not to
the MySQL server - to the SSH daemon only! But the MySQL client API is
not designed to 'see' the difference!
Refer this.
I run a windows server and from time to time the php-win.exe will load and stay in the processes list on the windows task manager.
If you know the host file is correct, then kill the php-win.exe process and restart iis iisreset
If you are running windows then your problem should be solved.
I've had the exact same mysql error (ERROR 2013 (HY000): Lost connection to MySQL server at 'reading initial communication packet', system error: 0=) and have resolved it by adding a newline to /etc/hosts.deny.
Possibility: your database is corrupted.
I encountered this situation when I was running an UPDATE statement on a specific row of a specific table. (Specifically, I was editing an item in a Django Admin site.) Most of the time the database worked just fine.
I finally resolved the problem by running:
OPTIMIZE TABLE `your_table`
After that everything was OK, no connection lost.
Conclusion:
The problem "Lost connection to MySQL server at 'reading initial communication packet'", sometimes "Can't connect to MySQL server on '127.0.0.1'", could possibly be resolved by running a full database optimization if the database is corrupted. For more info, read this.
Just to further extend the list of possible causes: it could also be as banal as wrong connection data/credentials. I encountered this error in conjunction with sqlalchemy:
sqlalchemy.exc.OperationalError: (mysql.connector.errors.OperationalError) 2013 (HY000): Lost connection to MySQL server at 'reading initial communication packet', system error: 0
In my code I connect to several different databases and once in a while it happens that I don't get the mapping between the db connections and their credentials (e.g. ip address of server, db-name, password etc.) right, which then also results in the 2013-error (in this case wrapped into an sqlalchemy operational error).
setting.py file set like:
'ENGINE': 'django.db.backends.mysql',
'NAME': 'test2',
'USER': 'root',
'PASSWORD': '',
'HOST': 'localhost',
'PORT': '3308',
This bug report might be of interest to you. Don't know if this will help you, but some were able to solve it by using the name of the server rather than the ip address in the connection properties.