Running the following code:
click here
I got the next output:
3 ok 6 ok oops ok ok Boom
I don't understand why does he prints the bolded ok? he doesn't even enter the loop.
I would like to get in-depth understanding of how exceptions and finally in particular works.
Thanks in advance!
code in finally block is always executed before leaving the try-catch block. The code in finally block is executed even if an exception is caught.
For detailed explanation of exception handling in python, see python 3 documentation
The official spec is
If finally is present, it specifies a ‘cleanup’ handler. The try clause is executed, including any except and else clauses. If an exception occurs in any of the clauses and is not handled, the exception is temporarily saved. The finally clause is executed. If there is a saved exception it is re-raised at the end of the finally clause. If the finally clause raises another exception, the saved exception is set as the context of the new exception. If the finally clause executes a return or break statement, the saved exception is discarded:
So what happens in the fourth iteration of your loop is number is set to "a" and when you try to convert it to int an exception is raised. Since there is no matching except in the inner try block the exception is saved, the finally block is executed which gives the fourth ok output and then the saved exception is reraised and caught by the outer try block.
I know try/except can handle errors in my program.
But, is there a way of making the error be displayed in the program execution, be ignored and let the execution go on?
In VBScript and other VB-derived languages, you can get this sort of behavior with "ON ERROR GOTO NEXT".
No such behavior exists in Python. Even if you wrap each top-level statement like:
try:
do_something()
except Exception as e:
print e
try:
do_something_else()
except Exception as e:
print e
you'd still have the result that statements within do_something are skipped at the point the exception is thrown.
Though perhaps if you have a particular use-case in mind, there may be other acceptable answers. For instance, in a top-level loop:
while True:
cmd = get_command()
if cmd == 'quit': break
try:
run_command(cmd)
except Exception as e:
print "Error running " + cmd + ":"
print e
import traceback
try:
# do whatever you want
except Exception:
traceback.print_exc()
Of course you should be more specific in a real scenario, i.e. you shouldn't catch and ignore all Exception instances, only the ones you are interested in and you know that they are safe to ignore.
Also note that if an exception happens somewhere within the try..except block, the execution will continue after the try..except block, not at the next statement. This is probably the closest to what you want to achieve.
What is the intended use of the optional else clause of the try statement?
The statements in the else block are executed if execution falls off the bottom of the try - if there was no exception. Honestly, I've never found a need.
However, Handling Exceptions notes:
The use of the else clause is better
than adding additional code to the try
clause because it avoids accidentally
catching an exception that wasn’t
raised by the code being protected by
the try ... except statement.
So, if you have a method that could, for example, throw an IOError, and you want to catch exceptions it raises, but there's something else you want to do if the first operation succeeds, and you don't want to catch an IOError from that operation, you might write something like this:
try:
operation_that_can_throw_ioerror()
except IOError:
handle_the_exception_somehow()
else:
# we don't want to catch the IOError if it's raised
another_operation_that_can_throw_ioerror()
finally:
something_we_always_need_to_do()
If you just put another_operation_that_can_throw_ioerror() after operation_that_can_throw_ioerror, the except would catch the second call's errors. And if you put it after the whole try block, it'll always be run, and not until after the finally. The else lets you make sure
the second operation's only run if there's no exception,
it's run before the finally block, and
any IOErrors it raises aren't caught here
There is one big reason to use else - style and readability. It's generally a good idea to keep code that can cause exceptions near the code that deals with them. For example, compare these:
try:
from EasyDialogs import AskPassword
# 20 other lines
getpass = AskPassword
except ImportError:
getpass = default_getpass
and
try:
from EasyDialogs import AskPassword
except ImportError:
getpass = default_getpass
else:
# 20 other lines
getpass = AskPassword
The second one is good when the except can't return early, or re-throw the exception. If possible, I would have written:
try:
from EasyDialogs import AskPassword
except ImportError:
getpass = default_getpass
return False # or throw Exception('something more descriptive')
# 20 other lines
getpass = AskPassword
Note: Answer copied from recently-posted duplicate here, hence all this "AskPassword" stuff.
Python try-else
What is the intended use of the optional else clause of the try statement?
The intended use is to have a context for more code to run if there were no exceptions where it was expected to be handled.
This context avoids accidentally handling errors you did not expect.
But it's important to understand the precise conditions that cause the else clause to run, because return, continue, and break can interrupt the control flow to else.
In Summary
The else statement runs if there are no exceptions and if not interrupted by a return, continue, or break statement.
The other answers miss that last part.
From the docs:
The optional else clause is executed if and when control flows off the
end of the try clause.*
(Bolding added.) And the footnote reads:
*Currently, control “flows off the end” except in the case of an
exception or the execution of a return, continue, or break statement.
It does require at least one preceding except clause (see the grammar). So it really isn't "try-else," it's "try-except-else(-finally)," with the else (and finally) being optional.
The Python Tutorial elaborates on the intended usage:
The try ... except statement has an optional else clause, which, when
present, must follow all except clauses. It is useful for code that
must be executed if the try clause does not raise an exception. For
example:
for arg in sys.argv[1:]:
try:
f = open(arg, 'r')
except OSError:
print('cannot open', arg)
else:
print(arg, 'has', len(f.readlines()), 'lines')
f.close()
The use of the else clause is better than adding additional code to
the try clause because it avoids accidentally catching an exception
that wasn’t raised by the code being protected by the try ... except
statement.
Example differentiating else versus code following the try block
If you handle an error, the else block will not run. For example:
def handle_error():
try:
raise RuntimeError('oops!')
except RuntimeError as error:
print('handled a RuntimeError, no big deal.')
else:
print('if this prints, we had no error!') # won't print!
print('And now we have left the try block!') # will print!
And now,
>>> handle_error()
handled a RuntimeError, no big deal.
And now we have left the try block!
One use: test some code that should raise an exception.
try:
this_should_raise_TypeError()
except TypeError:
pass
except:
assert False, "Raised the wrong exception type"
else:
assert False, "Didn't raise any exception"
(This code should be abstracted into a more generic test in practice.)
Try-except-else is great for combining the EAFP pattern with duck-typing:
try:
cs = x.cleanupSet
except AttributeError:
pass
else:
for v in cs:
v.cleanup()
You might think this naïve code is fine:
try:
for v in x.cleanupSet:
v.clenaup()
except AttributeError:
pass
This is a great way of accidentally hiding severe bugs in your code. I typo-ed cleanup there, but the AttributeError that would let me know is being swallowed. Worse, what if I'd written it correctly, but the cleanup method was occasionally being passed a user type that had a misnamed attribute, causing it to silently fail half-way through and leave a file unclosed? Good luck debugging that one.
I find it really useful when you've got cleanup to do that has to be done even if there's an exception:
try:
data = something_that_can_go_wrong()
except Exception as e: # yes, I know that's a bad way to do it...
handle_exception(e)
else:
do_stuff(data)
finally:
clean_up()
Even though you can't think of a use of it right now, you can bet there has to be a use for it. Here is an unimaginative sample:
With else:
a = [1,2,3]
try:
something = a[2]
except IndexError:
print("out of bounds")
else:
print(something)
Without else:
try:
something = a[2]
except IndexError:
print("out of bounds")
if "something" in locals():
print(something)
Here you have the variable something defined if no error is thrown. You can remove this outside the try block, but then it requires some messy detection if a variable is defined.
There's a nice example of try-else in PEP 380. Basically, it comes down to doing different exception handling in different parts of the algorithm.
It's something like this:
try:
do_init_stuff()
except:
handle_init_suff_execption()
else:
try:
do_middle_stuff()
except:
handle_middle_stuff_exception()
This allows you to write the exception handling code nearer to where the exception occurs.
From Errors and Exceptions # Handling exceptions - docs.python.org
The try ... except statement has an optional else clause, which,
when present, must follow all except clauses. It is useful for code
that must be executed if the try clause does not raise an exception.
For example:
for arg in sys.argv[1:]:
try:
f = open(arg, 'r')
except IOError:
print 'cannot open', arg
else:
print arg, 'has', len(f.readlines()), 'lines'
f.close()
The use of the else clause is better than adding additional code to
the try clause because it avoids accidentally catching an exception
that wasn’t raised by the code being protected by the try ... except
statement.
try:
statements # statements that can raise exceptions
except:
statements # statements that will be executed to handle exceptions
else:
statements # statements that will be executed if there is no exception
Example :
try:
age=int(input('Enter your age: '))
except:
print ('You have entered an invalid value.')
else:
if age <= 21:
print('You are not allowed to enter, you are too young.')
else:
print('Welcome, you are old enough.')
The Output :
>>>
Enter your age: a
You have entered an invalid value.
>>> RESTART
>>>
Enter your age: 25
Welcome, you are old enough.
>>> RESTART
>>>
Enter your age: 13
You are not allowed to enter, you are too young.
>>>
Copied from : https://geek-university.com/python/the-try-except-else-statements/
Looking at Python reference it seems that else is executed after try when there's no exception.
The optional else clause is executed if and when control flows off the end of the try clause. 2 Exceptions in the else clause are not handled by the preceding except clauses.
Dive into python has an example where, if I understand correctly, in try block they try to import a module, when that fails you get exception and bind default but when it works you have an option to go into else block and bind what is required (see link for the example and explanation).
If you tried to do work in catch block it might throw another exception - I guess that's where the else block comes handy.
That's it. The 'else' block of a try-except clause exists for code that runs when (and only when) the tried operation succeeds. It can be used, and it can be abused.
try:
fp= open("configuration_file", "rb")
except EnvironmentError:
confdata= '' # it's ok if the file can't be opened
else:
confdata= fp.read()
fp.close()
# your code continues here
# working with (possibly empty) confdata
Personally, I like it and use it when appropriate. It semantically groups statements.
I would add another use case that seems straight forward when handling DB sessions:
# getting a DB connection
conn = db.engine.connect()
# and binding to a DB session
session = db.get_session(bind=conn)
try:
# we build the query to DB
q = session.query(MyTable).filter(MyTable.col1 == 'query_val')
# i.e retrieve one row
data_set = q.one_or_none()
# return results
return [{'col1': data_set.col1, 'col2': data_set.col2, ...}]
except:
# here we make sure to rollback the transaction,
# handy when we update stuff into DB
session.rollback()
raise
else:
# when no errors then we can commit DB changes
session.commit()
finally:
# and finally we can close the session
session.close()
Perhaps a use might be:
#debug = []
def debuglog(text, obj=None):
" Simple little logger. "
try:
debug # does global exist?
except NameError:
pass # if not, don't even bother displaying
except:
print('Unknown cause. Debug debuglog().')
else:
# debug does exist.
# Now test if you want to log this debug message
# from caller "obj"
try:
if obj in debug:
print(text) # stdout
except TypeError:
print('The global "debug" flag should be an iterable.')
except:
print('Unknown cause. Debug debuglog().')
def myfunc():
debuglog('Made it to myfunc()', myfunc)
debug = [myfunc,]
myfunc()
Maybe this will lead you too a use.
I have found the try: ... else: construct useful in the situation where you are running database queries and logging the results of those queries to a separate database of the same flavour/type. Let's say I have lots of worker threads all handling database queries submitted to a queue
#in a long running loop
try:
query = queue.get()
conn = connect_to_db(<main db>)
curs = conn.cursor()
try:
curs.execute("<some query on user input that may fail even if sanitized">)
except DBError:
logconn = connect_to_db(<logging db>)
logcurs = logconn.cursor()
logcurs.execute("<update in DB log with record of failed query")
logcurs.close()
logconn.close()
else:
#we can't put this in main try block because an error connecting
#to the logging DB would be indistinguishable from an error in
#the mainquery
#We can't put this after the whole try: except: finally: block
#because then we don't know if the query was successful or not
logconn = connect_to_db(<logging db>)
logcurs = logconn.cursor()
logcurs.execute("<update in DB log with record of successful query")
logcurs.close()
logconn.close()
#do something in response to successful query
except DBError:
#This DBError is because of a problem with the logging database, but
#we can't let that crash the whole thread over what might be a
#temporary network glitch
finally:
curs.close()
conn.close()
#other cleanup if necessary like telling the queue the task is finished
Of course if you can distinguish between the possible exceptions that might be thrown, you don't have to use this, but if code reacting to a successful piece of code might throw the same exception as the successful piece, and you can't just let the second possible exception go, or return immediately on success (which would kill the thread in my case), then this does come in handy.
Here is another place where I like to use this pattern:
while data in items:
try
data = json.loads(data)
except ValueError as e:
log error
else:
# work on the `data`
An else block can often exist to complement functionality that occurs in every except block.
try:
test_consistency(valuable_data)
except Except1:
inconsistency_type = 1
except Except2:
inconsistency_type = 2
except:
# Something else is wrong
raise
else:
inconsistency_type = 0
"""
Process each individual inconsistency down here instead of
inside the except blocks. Use 0 to mean no inconsistency.
"""
In this case, inconsistency_type is set in each except block, so that behaviour is complemented in the no-error case in else.
Of course, I'm describing this as a pattern that may turn up in your own code someday. In this specific case, you just set inconsistency_type to 0 before the try block anyway.
One of the use scenarios I can think of is unpredictable exceptions, which can be circumvented if you try again. For instance, when the operations in try block involves random numbers:
while True:
try:
r = random.random()
some_operation_that_fails_for_specific_r(r)
except Exception:
continue
else:
break
But if the exception can be predicted, you should always choose validation beforehand over an exception. However, not everything can be predicted, so this code pattern has its place.
I have found else useful for dealing with a possibly incorrect config file:
try:
value, unit = cfg['lock'].split()
except ValueError:
msg = 'lock monitoring config must consist of two words separated by white space'
self.log('warn', msg)
else:
# get on with lock monitoring if config is ok
An exception reading the lock config disables lock monitoring and ValueErrors log a helpful warning message.
Suppose your programming logic depends on whether a dictionary has an entry with a given key. You can test the result of dict.get(key) using if... else... construct, or you can do:
try:
val = dic[key]
except KeyError:
do_some_stuff()
else:
do_some_stuff_with_val(val)
One could use this construct for handling exceptions in a common way within the finally clause, while doing something else when there's no exception:
class TooManyRetries(RuntimeError):
pass
n_tries = 0
max_retries = 2
while True:
try:
n_tries += 1
if n_tries >= max_retries:
raise TooManyRetries
fail_prone_operation()
except Exception1 as ex:
# handle1
except Exception2 as ex:
# handle2
except Exception3 as ex:
# handle3
except TooManyRetries as ex:
raise
else: # No exception
n_tries = 0
finally:
common_restore_state()
continue
I may have missed it in the dozens of answers, but I prefer to minimize the LOC in a try: block, but I like how finally: can clean up a code segment. The else: block provides a clean way to accommodate that for file I/O, database work, etc., lots of examples above.
The else: block is confusing and (nearly) useless. It's also part of the for and while statements.
Actually, even on an if-statement, the else: can be abused in truly terrible ways creating bugs that are very hard to find.
Consider this.
if a < 10:
# condition stated explicitly
elif a > 10 and b < 10:
# condition confusing but at least explicit
else:
# Exactly what is true here?
# Can be hard to reason out what condition is true
Think twice about else:. It is generally a problem. Avoid it except in an if-statement and even then consider documenting the else- condition to make it explicit.