We Keep Coding

ModuleNotFoundError: No module named 'schedule'

I have python program that imports schedule (import schedule) at the beginning. The code executes without a problem with python3 command, but starting it from other python file with call("sudo python3 ProgramWithSchedule.py", shell=True) returns error ModuleNotFoundError: No module named 'schedule'. And I can't figure out why...
I have library schedule installed with pip, pip3 AND apt-get (tried all three just to be sure :)
Thanks!

Because you are using a different interpreter/virtual environment for each project, which is generally considered the best practice.
You can apply the command below to create a file with all your installed modules, so you can use them whenever you want, by a single command to install all.
To keep/save all modules in a file:
pip freeze > requirements.txt
To install all of them with a single command in a new interpreter/virtual environment:
pip install requirements.txt
In case you tried installing a package and get an output:>>Requirement already satisfied.
You will find a path in your output where it says Requirement already satisfied, copy the path. Now go back to your working environment.
import sys
sys.path.append("/the/path/you/copied")
import schedule

You can try to force the usage of the same python interpreter with :
call(f"sudo {os.getenv('PYTHON3')} ProgramWithSchedule.py", shell=True)
and call your-script.py with :
PYTHON3=$(type python3) your-script.py ...

ModuleNotFoundException youtube-dl module is not recognized

i have installed the youtube-dl module via pip with pip install youtube-dl and it worked. I can use it in CMD but for some weird Reason Python says that the Module doesnt exist:
Extension 'cogs.music' raised an error: ModuleNotFoundError: No module named 'youtube_dl'

this problem usually happens when there is more than one python version on the computer, download the modules according to the version you want to use
if this is didn't work for us do like bottom steps
go your python libs path and look up you must got this ........\lib\site-packages\youtube-dl
if you havn't got, go pypi site and download packets
after that, take out this file to ......\lib\site-packages
you should see like this :
or you can do like this:go your python path and open cmd and start writing:
......\python.exe -m pip install youtube_dl

Try the following command.
pip3 install --upgrade youtube-dl

No module named 'pynput'

I am completely new to Python and and still in my babysteps at coding and can't get this thing to work.
I am trying to build an auto-clicker as a learning experience, so I use pynput:
from pynput.mouse import Button, Controller
from pynput.keyboard import Listener, KeyCode
But I get the error:
from pynput.mouse import Button, Controller
ModuleNotFoundError: No module named 'pynput'
As troubleshooting I again typed in the cmd "pip install pynput" and got:
Requirement already satisfied: pynput in c:\program files (x86)\python\python37-32\lib\site-packages (1.4)
Requirement already satisfied: six in c:\program files (x86)\python\python37-32\lib\site-packages (from pynput) (1.12.0)
Just to be sure, I also tried "pip3 install pynput" with the same result. When I am in the IDLE and type in "import pynput", I get no errors. I only have one python version installed.
Do you have any ideas what I am still doing wrong?
If you need any more information, just let me know.
Thank you in advance.
JM

You should check the Interpreter the PyCharm uses for your project here:
File -> Settings -> Project: %Project_name% -> Project Interpreter.
It should be same as where you installed pynput.

There might be one of these possibilities to this problem:
The package was not correctly installed. Uninstall it and install it again and see if issue persists.
There could be permission issue on the path where the package is installed. Does it have full rw permissions so python can access it? If you are using linux, use "sudo pip install"
If you have installed the package inside a virtualenv and running the program outside the virtualenv, the package will not be available.

I had a same problem with pynput module.
I fixed my problem in the below.
I checked my python file name and it was a "pynput.py"
This may call my file as pynput module.
So, I changed my file name "pynput.py" --> "pynput1.py"
And, it works well!!
I really hope it can resolve your problem

You probably have multiple python installations and the one used by pycharm is not the one linked with the pip binary.
To solve this issue is it enough to install the library using pip as a module.
Step 1: understand what python interpreter you are actually using
import sys
print(sys.executable)
the output is your path_interpreter (something like /Users/xyz/bin/python)
Sept 2: run pip with that interpreter
from terminal: path_interpreter -m pip install pynput
That's it.
UPDATE: if you get failed to acquire X connection: No module named 'tkinter', try sudo apt-get install python3-tk

If your using PyCharm, try going to the terminal shell (that's built in PyCharm), and type pip install pynput.
If you are using any different IDE, go to your device terminal and type the same thing.

"ImportError: No module named twilio.rest"

I have installed python 2.7.10 with PATH access and correctly installed twilio. However, when I try to execute a code I get this error message
Traceback (most recent call last):
File "C:\Users\tmslvo\Google Drive\Desktop\send text.py", line 1, in <module>
from twilio.rest import TwilioRestClient
ImportError: No module named twilio.rest
Now I read that a reason might be that python can't find the twilio package so I tried the
which -a python
which -a twilio
commands (in my Windows command prompt) in which case I get
'which' is not recognized as an internal or external command,
operable program or batch file.
Does anybody have an idea of what I'm doing wrong?
Thank you!

Twilio developer evangelist here.
I think your problem will be that somehow when you installed the library, it failed silently(?). A few things to keep in mind:
When installing Python libraries, always make sure you use pip.
Also, check that none of your files within the project are actually called twilio.py as this will conflict with the actual library.
Check that you're using the version of Python you think you're using by running python --version
All that failing, run the installation again, and all going well (without errors), you should be able to test it quickly with the following code.
import twilio
import twilio.rest
try:
client = twilio.rest.TwilioRestClient(account_sid, auth_token)
message = client.messages.create(
body="Hello World",
to="+14159352345",
from_="+14158141829"
)
except twilio.TwilioRestException as e:
print e

try this: sudo pip3 install twilio --upgrade

I had this problem as well.
In my case, I had named my file twilio.py and that is what caused the error.
Renaming the file to send_sms.py ( or any other name of your choice) will resolve the issue!

Close and then relunch all IDLE instances.
This sounds obvious but it worked for me, since the installations of components were successful

I ran into this same issue. I had used easy_install instead of pip to install twilio which was the problem. To fix this I ran pip uninstall twilio and reinstalled using pip.

rename file name other than twilio.py
EX:send_sms.py

A bit late to the party here but I also ran into this issue.
After some trial and error, it looks like it was due to the pip version I was using. I originally used -
pip3 install twilio.
Now I'm unsure of the underlying reason why this did not work, but it seems that pip3 does not encompass all versions of python 3.x? Using
pip3 list and
pip3.8 list
I noticed I had the twilio module for pip3 but not for pip 3.8.
I used the following and was able to solve the issue
pip3.8 install twilio.
I used pip3.8 because that matched the python3.8 version that I am using.

Pycharm user:
Macs (mid 2017) come with python 2.6 and 2.7 installed. PyCharm uses by default 2.6. When you install twilio (Pip install) the module is installed in python version 2.7. So, when you try to run twilio from PyCharm you get
ImportError: No module named twilio.rest
Solution: change the python interpreter in PyCharm. Go to preferences > project interpreter and from the drop menu Project Interpreter choose python 2.7

I think your pip is not configured properly . You may be getting succefuuly installed message but it is not install where it should be. try pip install --user i am sure it will work for you. pip install may work fine only in virtualenvironment without any config.Try pip install --user package name
#iosCurator

I had first installed twilio with the easy_intall tool
I followed the steps below:
Uninstall twilio with the command pip uninstall twillo
Install twilio with the command pip install twilio
Close the python IDLE and relaunch it.

For the windows user,
I have suggested, pip3 install twilio

Follow these steps (on mac):
Shift + Command + P
search: Configure Language Specific Setting
search: Python
add: "code-runner.runInTerminal": true
That's it!
Ask me any question about it by:
My LinkedIn

I ran into this issue when using poetry for my dependency management. Poetry doesn't recognise it as an existing package yet, hence it won't run your code unless you try the poetry+pip way.

there will be 2 reasons for this
1.make sure you kept right path for python files in environment location
2.install twilio
commands:
1.pip3 install twilio
(or)
pip install twilio
2.python otpv.py

How can I tell if Python setuptools is installed?

I'm writing a quick shell script to make it easier for some of our developers to run Fabric. (I'm also new to Python.) Part of installing Fabric is installing pip, and part of installing pip is installing setuptools.
Is there any easy way to detect if setuptools is already installed? I'd like to make it possible to run the script multiple times, and it skip anything it's already done. As it stands now, if you run ez_setup.py twice in a row, you'll get a failure the second time.
One idea I had was to look for the easy_install scripts under the /Scripts folder. I can guess at the Python root using sys.executable, and then swap off the executable name itself. But I'm looking for something a little more elegant (and perhaps cross-OS friendly). Any suggestions?

Try with this command.
$ pip list
It returns the versions of both pip and setuptools. Otherwise try with
$ pip install pil
If this also doesn't work, then try with
$ which easy_install

This isn't great but it'll work.
A simple python script can do the check
import sys
try:
import setuptools
except ImportError:
sys.exit(1)
else:
sys.exit(0)
OR
try:
import setuptools
except ImportError:
print("Not installed.")
else:
print("Installed.")
Then just check it's exit code in the calling script

Just run the following code into IDLE:
import easy_install
If it just goes to the next line, I think it's installed.
If it says:
Error: invalid syntax
Then it probably isn't installed.
I know this because I tested pip with it.
Also just check import pip to see if pip is pre-installed. :)

you can check for easy_install and setuptools by running the following command line commands:
which easy_install
#finds the path to easy_install if it exists
less path/to/easy_install
#where path/to/easy_install is the output from the above command
#this outputs your easy_install script which will mention the version of setuptools
If the easy_install/setuptools bundle is installed, your output from the second command above will probably read something like this:
#EASY-INSTALL-ENTRY-SCRIPT: 'setuptools==0.6c11','console_scripts','easy_install'

It comes preinstalled with new versions of Python.
pip3 list
was enough to identify it was installed for me

This will display the version of your setuptools if it is installed already
$python -c "import sys; import setuptools; print(setuptools.version.__version__)"

Depends with the python version installed. you can try "pip list" or "pip3 list" and check for the setuptools and version installed.