When I enter
$ git push heroku master
It Shows:
ERROR: Double requirement given: telegram (from -r /tmp/build_996aa7e0/requirements.txt (line 60)) (already in telegram==0.0.1 (from -r /tmp/build_996aa7e0/requirements.txt (line 47)), name='telegram')
There is the All logs:
Enumerating objects: 8, done.
Counting objects: 100% (8/8), done.
Delta compression using up to 8 threads
Compressing objects: 100% (5/5), done.
Writing objects: 100% (8/8), 7.00 KiB | 716.00 KiB/s, done.
Total 8 (delta 0), reused 0 (delta 0), pack-reused 0
remote: Compressing source files... done.
remote: Building source:
remote: -----> Building on the Heroku-20 stack
remote: -----> Using buildpack: heroku/python
remote: -----> Python app detected
remote: -----> Installing python-3.6.13
remote: -----> Installing pip 20.1.1, setuptools 47.1.1 and wheel 0.34.2
remote: -----> Installing SQLite3
remote: -----> Installing requirements with pip
remote: ERROR: Double requirement given: telegram (from -r /tmp/build_996aa7e0/requirements.txt (line 60)) (already in telegram==0.0.1 (from -r /tmp/build_996aa7e0/requirements.txt (line 47)), name='telegram')
remote: ! Push rejected, failed to compile Python app.
remote: ! Push failed
remote: ! ## Warning - The same version of this code has already been built: 084ac888b168cf47da1ece8fd2b17b05e1d4df48
remote: ! We have detected that you have triggered a build from source code with version 084ac888b168cf47da1ece8fd2b17b05e1d4df48
remote: ! at least twice. One common cause of this behavior is attempting to deploy code from a different branch.
remote: ! If you are developing on a branch and deploying via git you must run:
remote: ! git push heroku :main
remote: ! This article goes into details on the behavior:
remote: ! https://devcenter.heroku.com/articles/duplicate-build-version
remote: Verifying deploy...
remote: ! Push rejected to zsk766.
remote: To https://git.heroku.com/zsk766.git
It looks like you've got telegram twice in your requirements.txt, once at line 60 and once at line 47.
Open requirements.txt, delete one of those lines, and repush your files.
Related
i wanted to host my discord bot on heroku
i have followed and youtube video till here
but i don't know what to do to fix this error
full
Enumerating objects: 6, done.
Counting objects: 100% (6/6), done.
Delta compression using up to 4 threads
Compressing objects: 100% (4/4), done.
Writing objects: 100% (6/6), 2.68 KiB | 2.68 MiB/s, done.
Total 6 (delta 0), reused 0 (delta 0), pack-reused 0
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Building on the Heroku-20 stack
remote: -----> Using buildpack: heroku/python
remote: -----> App not compatible with buildpack: https://buildpack-registry.s3.amazonaws.com/buildpacks/heroku/python.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: !
remote: ! ## Warning - The same version of this code has already been built: 0f11b1acbc6bdb39c6ea1fc83fa514db48551dfe
remote: !
remote: ! We have detected that you have triggered a build from source code with version 0f11b1acbc6bdb39c6ea1fc83fa514db48551dfe
remote: ! at least twice. One common cause of this behavior is attempting to deploy code from a different branch.
remote: !
remote: ! If you are developing on a branch and deploying via git you must run
remote: !
remote: ! git push heroku <branchname>:main
remote: !
remote: ! This article goes into details on the behavior:
remote: ! https://devcenter.heroku.com/articles/duplicate-build-version
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to bruh-bot-7869.
remote:
To https://git.heroku.com/bruh-bot-7869.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/bruh-bot-7869.git'
i have 2 files in the folder :-
main.py
rr.json
both are important
and in the Procfile :-
worker: python main.py
and requirements.txt :-
git+https://github.com/Rapptz/discord.py#rewrite
i have no idea what to do
please help!
i don't know what was the problem
but i uploaded my files to github and connected heroku github to heroku
and deploying
i was 100% doing it wrong in requirement.txt
when i used pip3 freeze (Marrows in the comments told me that) and added all that to requirements.txt and uploaded to github.
and after that deployed the bot it all worked fine . Thanks :)
I'm new to heroku, but I've been following the documentation to the letter. I am deploying my dash app to heroku. The setup was going well until the final master push
> (venv) -MacBook-Air-3 heroku % git push heroku master
Enumerating objects: 12155, done.
Counting objects: 100% (12155/12155), done.
Delta compression using up to 4 threads
Compressing objects: 100% (2900/2900), done.
Writing objects: 100% (12155/12155), 15.08 MiB | 1.53 MiB/s, done.
Total 12155 (delta 9145), reused 12155 (delta 9145)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Building on the Heroku-20 stack
remote: -----> Python app detected
remote: -----> Installing python-3.6.12
remote: -----> Installing pip 20.1.1, setuptools 47.1.1 and wheel 0.34.2
remote: -----> Installing SQLite3
remote: -----> Installing requirements with pip
remote: ERROR: Could not find a version that satisfies the requirement hBrotli==1.0.9
(from -r /tmp/build_77052133/requirements.txt (line 1)) (from versions: none)
remote: ERROR: No matching distribution found for hBrotli==1.0.9 (from -r /tmp/build_77052133/requirements.txt (line 1))
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
I went to the requirements.txt that I created with pip3 freeze >requirements.txt as per the documentation and indeed on line 1 there was hBrotli== 1.0.9. I am not familiar with hBrotli and don't use it for my code and can't seem to find any information about it. I'm not sure what the error message is implying.
there is no package named hBrotli it may be due to some typo just change hBrotli to Brotli
This is the package that you are looking for https://pypi.org/project/Brotli/ so just change the hBrotli to Brotli
Or just do pip install Brotli
Also if needed change imports into from brotli import nameOfClass
I deployed my django app to heroku and its working well. When I change something in project on local files and want to push to heroku It always push all files and it takes time.
> git add templates/post/detail.html
> git commit -am "read more"
[master 153e38f] read more
2 files changed, 3 insertions(+), 3 deletions(-)
> git push heroku master
I use these commands. But it's deploying everything:
Enumerating objects: 13, done.
Counting objects: 100% (13/13), done.
Delta compression using up to 8 threads
Compressing objects: 100% (7/7), done.
Writing objects: 100% (7/7), 695 bytes | 695.00 KiB/s, done.
Total 7 (delta 5), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: ! Python has released a security update! Please consider upgrading to python-3.8.6
remote: Learn More: https://devcenter.heroku.com/articles/python-runtimes
remote: -----> No change in requirements detected, installing from cache
remote: -----> Installing pip 20.1.1, setuptools 47.1.1 and wheel 0.34.2
remote: -----> Installing SQLite3
remote: -----> Installing requirements with pip
remote: -----> $ python manage.py collectstatic --noinput
remote: 1392 static files copied to '/tmp/build_57ea00eb/staticfiles', 3734 post-processed.
remote:
remote: -----> Discovering process types
remote: Procfile declares types -> web
remote:
remote: -----> Compressing...
remote: Done: 280.5M
remote: -----> Launching...
remote: Released v15
remote: https://xxxxxxxxxx.herokuapp.com/ deployed to Heroku
remote:
remote: Verifying deploy... done.
To https://git.heroku.com/xxxxxxxxxxxxxx.git
2d9ba8e..153e38f master -> master
The file that I changed around 1mb but it pushes 280mb. So what's the problem with it?
If you don't want to push your static file for every time then run this command :
heroku config:set DISABLE_COLLECTSTATIC=1
Enable static file for future:
heroku config:unset DISABLE_COLLECTSTATIC(for future use).
I am working through the learning log project in Python Crash Course by Eric Matthes, specifically working on the learning log app. I am trying to deploy to heroku but get this error:
(ll_env) C:\Users\benpg\Documents\Coding\Python\learning_log>git push heroku master
Enumerating objects: 54, done.
Counting objects: 100% (54/54), done.
Delta compression using up to 4 threads
Compressing objects: 100% (46/46), done.
Writing objects: 100% (54/54), 16.54 KiB | 940.00 KiB/s, done.
Total 54 (delta 4), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: ! Python has released a security update! Please consider upgrading to python-3.7.3
remote: Learn More: https://devcenter.heroku.com/articles/python-runtimes
remote: -----> Installing python-3.7.4
remote: -----> Installing pip
remote: -----> Installing SQLite3
remote: -----> Installing requirements with pip
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to pacific-refuge-12657.
remote:
To https://git.heroku.com/pacific-refuge-12657.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/pacific-refuge-12657.git'
Tried everything here including the two other questions linked at the start, no luck.
Here's my requirements.txt:
Django==1.8.4
dj-database-url==0.3.0
dj-static==0.0.6
django-bootstrap3==6.2.2
gunicorn==19.3.0
static3==0.6.1
psycopg2>=2.6.1
Edit:
I am using django 2.2.4. My requirements.txt is the way it is because there is a note in the book saying 'if you're using Windows, make sure your version of requirements.txt matches the list shown here regardless of which packages you were able to install'. Why is this?
This is the first requirements.txt I had, autogenerated except for the last line. This one didn't work either, same error message:
dj-database-url==0.5.0
dj-static==0.0.6
Django==2.2.4
django-bootstrap3==11.1.0
gunicorn==19.9.0
pytz==2019.2
sqlparse==0.3.0
static3==0.7.0
psycopg2>=2.6.1
Just had the same issue, changing the Python version back do 3.7.3 fixed it. Was able to build python and execute.
I have been working on a Django project that I am trying to deploy to Heroku. I've followed a tutorial from Python Crash Course. When I enter git push heroku master, I get the following as a response:
Counting objects: 73, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (65/65), done.
Writing objects: 100% (73/73), 26.20 KiB | 0 bytes/s, done.
Total 73 (delta 8), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: ! The latest version of Python 3 is python-3.6.2 (you are using Python-2.7.12, which is unsupported).
remote: ! We recommend upgrading by specifying the latest version (python-3.6.2).
remote: Learn More: https://devcenter.heroku.com/articles/python-runtimes
remote: -----> Installing Python-2.7.12
remote: ! Requested runtime (Python-2.7.12) is not available for this stack (heroku-16).
remote: ! Aborting. More info: https://devcenter.heroku.com/articles/python-support
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to fathomless-scrubland-11916.
remote:
When I Python --version the cmd line returns 2.7.14 which is the most up-to-date version. I feel like this error is telling me I need to use Python3 but their site says that 2.7.14 is supported as well. My runtime.txt specifies 2.7.14.
Please try python-3.5.2 in runtime.txt
though it gives a warning it still works