I'm trying to run my Python program and these are the modules I'm importing:
from tkinter import *
from functools import partial
import numpy as np import
matplotlib matplotlib.use("TkAgg")
from matplotlib.figure import Figure
from matplotlib.backends.backend_tkagg
import FigureCanvasTkAgg, NavigationToolbar2Tk
I always end up with the following error message:
C:\Users\HP\anaconda3\lib\site-packages\numpy\__init__.py:138: UserWarning: mkl-service package failed to import, therefore Intel(R) MKL initialization ensuring its correct out-of-the box operation under condition when Gnu OpenMP had already been loaded by Python process is not assured. Please install mkl-service package, see http://github.com/IntelPython/mkl-service
from . import _distributor_init
Traceback (most recent call last):
File "ASRS.py", line 12, in <module>
from matplotlib.figure import Figure
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\figure.py", line 18, in <module>
from matplotlib import docstring, projections
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\projections\__init__.py", line 1, in <module>
from .. import axes, docstring
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\axes\__init__.py", line 1, in <module>
from ._subplots import *
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\axes\_subplots.py", line 6, in <module>
from matplotlib.axes._axes import Axes
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\axes\_axes.py", line 14, in <module>
import matplotlib.contour as mcontour
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\contour.py", line 17, in <module>
import matplotlib.text as text
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\text.py", line 16, in <module>
from .textpath import TextPath # Unused, but imported by others.
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\textpath.py", line 11, in <module>
from matplotlib.mathtext import MathTextParser
File "C:\Users\HP\AppData\Roaming\Python\Python38\site-packages\matplotlib\mathtext.py", line 27, in <module>
from PIL import Image
File "C:\Users\HP\anaconda3\lib\site-packages\PIL\Image.py", line 94, in <module>
from . import _imaging as core
**ImportError: DLL load failed while importing _imaging: Belirtilen modül bulunamadı.**
How can I fix this?
Simply upgrading the package "Pillow" (using the Anaconda environment) worked for me to resolve this issue.
pip install --upgrade Pillow
Related
I am an amateur programmer. I am trying to use:
import thinkdsp as dsp
import thinkplot as plt
I have installed the pip install thinkx module but I keep getting that error and I don't understand why. I will leave what the console shows down below:
Traceback (most recent call last):
File "Karaokemaker1.py", line 1, in <module>
import thinkdsp as dsp
File "C:\Users\keigo\anaconda3\lib\site-packages\thinkdsp.py", line 17, in <module>
import scipy.stats
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\stats\__init__.py", line 384, in <module>
from .stats import *
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\stats\stats.py", line 185, in <module>
from . import distributions
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\stats\distributions.py", line 10, in <module>
from ._distn_infrastructure import (entropy, rv_discrete, rv_continuous,
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\stats\_distn_infrastructure.py", line 25, in <module>
from scipy import optimize
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\optimize\__init__.py", line 390, in <module>
from ._minimize import *
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\optimize\_minimize.py", line 30, in <module>
from ._trustregion_constr import _minimize_trustregion_constr
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\optimize\_trustregion_constr\__init__.py", line 4, in <module>
from .minimize_trustregion_constr import _minimize_trustregion_constr
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\optimize\_trustregion_constr\minimize_trustregion_constr.py", line 4, in <module>
from scipy.sparse.linalg import LinearOperator
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\sparse\linalg\__init__.py", line 116, in <module>
from .eigen import *
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\sparse\linalg\eigen\__init__.py", line 11, in <module>
from .arpack import *
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\sparse\linalg\eigen\arpack\__init__.py", line 22, in <module>
from .arpack import *
File "C:\Users\keigo\anaconda3\lib\site-packages\scipy\sparse\linalg\eigen\arpack\arpack.py", line 45, in <module>
from . import _arpack
ImportError: DLL load failed: The specified procedure could not be found.
I assumed the issue was with the scipy because all the following errors come from that module. I checked and I have everything installed properly for the scipy module.
Please help! Thank you!
Run any command prompt you are using as administrator and then run pip install lib_name --force-reinstall
Try using these two commands they will help you:
conda remove --force scipy
And:
pip install scipy
Hello I had the same issue than you. Depend on wich version of python you use you should choose a version thinkx. I recommend you to go on the website of thinkx and check out for past udapte. In my case that was with matplotlib 3.3.1 for python 3.7. I went in git bash and used
pip install matplotlib==3.0.1
and everything worked. I had the same issue with seaborn and it worked.
I did some changes on my Anaconda installation (I just uninstalled previous one, and installed a newer version). Now trying to run my code simply importing this:
from skimage.measure import compare_ssim
But it shows this error. How can I fix it? All searching didn't help. When I do this import on Anaconda Prompt, it doesn't complaint. But when I run this on Eclipse, it shows this error.
Traceback (most recent call last):
File "C:\Users\user\eclipse-workspace\project\hybrid.py", line 18, in <module>
from skimage.measure import compare_ssim
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\__init__.py", line 176, in <module>
from .util.lookfor import lookfor
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\util\__init__.py", line 12, in <module>
from ._montage import montage, montage2d
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\util\_montage.py", line 2, in <module>
from .. import exposure
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\exposure\__init__.py", line 1, in <module>
from .exposure import histogram, equalize_hist, \
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\exposure\exposure.py", line 4, in <module>
from ..color import rgb2gray
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\color\__init__.py", line 1, in <module>
from .colorconv import (convert_colorspace,
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\skimage\color\colorconv.py", line 59, in <module>
from scipy import linalg
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\scipy\linalg\__init__.py", line 190, in <module>
from .misc import *
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\scipy\linalg\misc.py", line 5, in <module>
from .blas import get_blas_funcs
File "C:\Users\user\AppData\Local\Continuum\anaconda3\lib\site-packages\scipy\linalg\blas.py", line 214, in <module>
from scipy.linalg import _fblas
ImportError: DLL load failed: The specified module could not be found.
Uninstalling and re-installing Numpy+mkl from here fixed, in my case.
My error arised from from scipy import signal. But it had given the same error as yours:
"from scipy.linalg import _fblas: ImportError: DLL load failed: The specified module could not be found"
I realized when I run this import on Anaconda Prompt, it doesn't complaint. But when I run this on Eclipse, it shows this error.
The simple solution was to add this to my PATH that helped fix the problem:
C:\Users\user\AppData\Local\Continuum\anaconda3\Library\bin
I'm trying to use Mayavi in Python 2.7, but cannot import it. My OS is Ubuntu (LTS). Here is the code:
import numpy
from mayavi.mlab import *
The following error is produced:
Traceback (most recent call last):
File "/path/to/my/script/my_script_name.py", line 2, in <module>
from mayavi import mlab
File "/usr/local/lib/python2.7/dist-packages/mayavi/mlab.py", line 16, in <module>
from mayavi.tools.camera import view, roll, yaw, pitch, move
File "/usr/local/lib/python2.7/dist-packages/mayavi/tools/camera.py", line 24, in <module>
from .engine_manager import get_engine
File "/usr/local/lib/python2.7/dist-packages/mayavi/tools/engine_manager.py", line 12, in <module>
from mayavi.preferences.api import preference_manager
File "/usr/local/lib/python2.7/dist-packages/mayavi/preferences/api.py", line 4, in <module>
from .preference_manager import preference_manager
File "/usr/local/lib/python2.7/dist-packages/mayavi/preferences/preference_manager.py", line 30, in <module>
from apptools.preferences.api import (ScopedPreferences, IPreferences,
File "/usr/lib/python2.7/dist-packages/apptools/preferences/api.py", line 4, in <module>
from preferences import Preferences
File "/usr/lib/python2.7/dist-packages/apptools/preferences/preferences.py", line 9, in <module>
from traits.api import Property, Str, Undefined, implements
ImportError: cannot import name implements
I have tried force-reinstalling the packages mayavi, implements, traits, but to no avail. I tried both with pip and with apt.
Edit: I think the error is that mayavi cannot access VTK for my Python 2.7 installation. When I try to pip force-reinstall mayavi, I get the error "Could not find any downloads that satisfy the requirement vtk (from mayavi)". That error is described here. I do not know what to do, since both vtk and vtkpython are properly installed (with apt) and working - the issue is with mayavi and pip not knowing what to do?
I'm trying to install Scipy through pip, but it won't work. It says that it already is installed, but when I try to import the modules it gives me errors.
from matplotlib import pyplot as plt
Error:
Traceback (most recent call last):
File "C:\Users\TimGF\Documents\Coding\Python\numpy.py", line 1, in <module>
from matplotlib import pyplot as plt
File "C:\Python36\lib\site-packages\matplotlib\__init__.py", line 127, in <module>
from . import cbook
File "C:\Python36\lib\site-packages\matplotlib\cbook\__init__.py", line 35, in <module>
import numpy as np
File "C:\Users\TimGF\Documents\Coding\Python\numpy.py", line 1, in <module>
from matplotlib import pyplot as plt
File "C:\Python36\lib\site-packages\matplotlib\pyplot.py", line 31, in <module>
import matplotlib.colorbar
File "C:\Python36\lib\site-packages\matplotlib\colorbar.py", line 32, in <module>
import matplotlib.artist as martist
File "C:\Python36\lib\site-packages\matplotlib\artist.py", line 15, in <module>
from . import cbook, docstring, rcParams
ImportError: cannot import name 'rcParams'
EDIT: It turned out, that the problem was, that I called my file "matplotlib.py".
Turned out that I was super stupid, and I just had to rename the python file to something else than "matplotlib.py" since it confused the script.
The problem is likely a configuration issue, because getting the installation correct on Macs seems to be tricky. I'm running Mavericks and matplotlib 1.4.x, yet when I open a Python 2.7.5 shell and import pylib, I get this error:
>>> import pylab
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/pylab.py", line 1, in <module>
from matplotlib.pylab import *
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/pylab.py", line 230, in <module>
import matplotlib.finance
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/finance.py", line 38, in <module>
from matplotlib.collections import LineCollection, PolyCollection
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/collections.py", line 27, in <module>
import matplotlib.backend_bases as backend_bases
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/backend_bases.py", line 55, in <module>
import matplotlib.textpath as textpath
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/textpath.py", line 22, in <module>
from matplotlib.mathtext import MathTextParser
File "/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/mathtext.py", line 64, in <module>
import matplotlib._png as _png
ImportError: dlopen(/Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/_png.so, 2): Library not loaded: /usr/local/lib/libpng15.15.dylib
Referenced from: /Library/Python/2.7/site-packages/matplotlib-1.4.x-py2.7-macosx-10.9-intel.egg/matplotlib/_png.so
Reason: image not found
I have libpng16 installed, but not libpng15.
I saw a hardcoded reference to libpng15 in _png.so.
Uninstall and install of matplotlib fixed the issue for me.
You can always moke it by generating a soft link like this
sudo ln -s /opt/X11/lib/libpng.dylib /usr/local/lib/libpng15.15.dylib
Not the cleaner solution but I haven't figure out why matplotlib stubbornly asks specifically for libpng15 and not any 15 or greater.