i want to compile .py to .exe. But when i do so the exe files is too big. Is there a solution??
i want the exe to be a smaller
i know that python was not meant to be compiled, executables made from python are bound to be large
, but the problem is i have learnt python like 3 years, and now i want to make apps/games for windows. i can't just install python on every device??
i want to make it small
i learnt that there is something called executable-packing??
using tools like crinkler
how can we do that with python
with pyinstaller or cx_freeze
Python 3.6 is supported by PyInstaller.
Open a cmd window in your Python folder (open a command window and use cd or while holding shift, right click it on Windows Explorer and choose 'Open command window here'). Then just enter
pip install pyinstaller
And that's it.
The simplest way to use it is by entering on your command prompt
pyinstaller file_name.py
For more details on how to use it, take a look at link
Related
I'm trying to convert a fairly simple Python program to an executable and couldn't find what I was looking for, so I have a few questions (I'm running Python 3.6):
The methods of doing this that I have found so far are as follows
downloading an old version of Python and using pyinstaller/py2exe
setting up a virtual environment in Python 3.6 that will allow me to do 1.
downloading a Python to C++ converter and using that.
Here is what I've tried/what problems I've run into.
I installed pyinstaller before the required download before it (pypi-something) so it did not work. After downloading the prerequisite file, pyinstaller still does not recognize it.
If I'm setting up a virtualenv in Python 2.7, do I actually need to have Python 2.7 installed?
similarly, the only python to C++ converters I see work only up until Python 3.5 - do I need to download and use this version if attempting this?
Steps to convert .py to .exe in Python 3.6
Install Python 3.6.
Install cx_Freeze, (open your command prompt and type pip install cx_Freeze.
Install idna, (open your command prompt and type pip install idna.
Write a .py program named myfirstprog.py.
Create a new python file named setup.py on the current directory of your script.
In the setup.py file, copy the code below and save it.
With shift pressed right click on the same directory, so you are able to open a command prompt window.
In the prompt, type python setup.py build
If your script is error free, then there will be no problem on creating application.
Check the newly created folder build. It has another folder in it. Within that folder you can find your application. Run it. Make yourself happy.
See the original script in my blog.
setup.py:
from cx_Freeze import setup, Executable
base = None
executables = [Executable("myfirstprog.py", base=base)]
packages = ["idna"]
options = {
'build_exe': {
'packages':packages,
},
}
setup(
name = "<any name>",
options = options,
version = "<any number>",
description = '<any description>',
executables = executables
)
EDIT:
be sure that instead of myfirstprog.py you should put your .pyextension file name as created in step 4;
you should include each imported package in your .py into packages list (ex: packages = ["idna", "os","sys"])
any name, any number, any description in setup.py file should not remain the same, you should change it accordingly (ex:name = "<first_ever>", version = "0.11", description = '' )
the imported packages must be installed before you start step 8.
Python 3.6 is supported by PyInstaller.
Open a cmd window in your Python folder (open a command window and use cd or while holding shift, right click it on Windows Explorer and choose 'Open command window here'). Then just enter
pip install pyinstaller
And that's it.
The simplest way to use it is by entering on your command prompt
pyinstaller file_name.py
For more details on how to use it, take a look at this question.
There is an open source project called auto-py-to-exe on GitHub. Actually it also just uses PyInstaller internally but since it is has a simple GUI that controls PyInstaller it may be a comfortable alternative. It can also output a standalone file in contrast to other solutions. They also provide a video showing how to set it up.
GUI:
Output:
Alternatively use pyinstaller directly:
pip install pyinstaller
pyinstaller filename
I can't tell you what's best, but a tool I have used with success in the past was cx_Freeze. They recently updated (on Jan. 7, '17) to version 5.0.1 and it supports Python 3.6.
Here's the pypi
https://pypi.python.org/pypi/cx_Freeze
The documentation shows that there is more than one way to do it, depending on your needs.
http://cx-freeze.readthedocs.io/en/latest/overview.html
I have not tried it out yet, so I'm going to point to a post where the simple way of doing it was discussed. Some things may or may not have changed though.
How do I use cx_freeze?
Now you can convert it by using PyInstaller. It works with even Python 3.
Steps:
Fire up your PC
Open command prompt
Enter command pip install pyinstaller
When it is installed, use the command 'cd' to go to the working directory.
Run command pyinstaller <filename>
I've been using Nuitka and PyInstaller with my package, PySimpleGUI.
Nuitka
There were issues getting tkinter to compile with Nuikta. One of the project contributors developed a script that fixed the problem.
If you're not using tkinter it may "just work" for you. If you are using tkinter say so and I'll try to get the script and instructions published.
PyInstaller
I'm running 3.6 and PyInstaller is working great!
The command I use to create my exe file is:
pyinstaller -wF myfile.py
The -wF will create a single EXE file. Because all of my programs have a GUI and I do not want to command window to show, the -w option will hide the command window.
This is as close to getting what looks like a Winforms program to run that was written in Python.
[Update 20-Jul-2019]
There is PySimpleGUI GUI based solution that uses PyInstaller. It uses PySimpleGUI. It's called pysimplegui-exemaker and can be pip installed.
pip install PySimpleGUI-exemaker
To run it after installing:
python -m pysimplegui-exemaker.pysimplegui-exemaker
The best and easiest way is auto-py-to-exe for sure, and I have given all the steps and red flags below which will take you just 5 mins to get a final .exe file as you don't have to learn anything to use it.
1.) It may not work for python 3.9 on some devices I guess.
2.) While installing python, if you had selected 'add python 3.x to path', open command prompt from start menu and you will have to type pip install auto-py-to-exe to install it. You will have to press enter on command prompt to get the result of the line that you are typing.
3.) Once it is installed, on command prompt itself, you can simply type just auto-py-to-exe to open it. It will open a new window. It may take up to a minute the first time. Also, closing command prompt will close auto-py-to-exe also so don't close it till you have your .exe file ready.
4.) There will be buttons for everything you need to make a .exe file and the screenshot of it is shared below. Also, for the icon, you need a .ico file instead of an image so to convert it, you can use https://convertio.co/
5.) If your script uses external files, you can add them through auto-py-to-exe and in the script, you will have to do some changes to their path. First, you have to write import sys if not written already, second, you have to make a variable for eg, location=getattr(sys,"_MEIPASS",".")+"/", third, the location of example.png would be location+"/example.png" if it is not in any folder.
6.) If it is showing any error, it may probably be because of a module called setuptools not being at the latest version. To upgrade it to the latest version, on command prompt, you will have to write pip install --upgrade setuptools. Also, in the script, writing import setuptools may help. If the version of setuptools is more than 50.0.0 then everything should be fine.
7.) After all these steps, in auto-py-to-exe, when the conversion is complete, the .exe file will be in the folder that you would have chosen (by default, it is 'c:/users/name/output') or it would have been removed by your antivirus if you have one. Every antivirus has different methods to restore a file so just experiment if you don't know.
Here is how the simple GUI of auto-py-to-exe can be used to make a .exe file.
PyOxidizer can be an option here. It's pretty popular with 3.3k stars on Github. Its documentation says
PyOxidizer is capable of producing a single file executable - with a copy of Python and all its dependencies statically linked and all resources (like .pyc files) embedded in the executable. You can copy a single executable file to another machine and run a Python application contained within. It just works.
While I'm not sure if it is capable of producing .exe file PyOxidizer definitely helps with packaging and distribution.
I have a decently complicated .py script, which uses several packages, incl matplotlib, numpy, and one custom, that is compiled from a fortran code. I want to make a windows executable out of this, that is distributeable in a way, that users don't need to have python installed on their computers for it to work.
When I make my .exe with pyinstaller --onefile myprogram.py the resulting .exe doesn't run on its own (if I doubleclick on it, the GUI it contains doesn't open), however, if I have anaconda installed, from anaconda prompt I can run it with .\path\to\program\myprogram.exe and it works all nicely (without creating an environment with matplotlib etc)
My question is: how can I make it so that the one file includes all the dependencies and I can just doubleclick on it and go?
Thanks in advance!
I want to make a portable app that would have some code and python executable that would run on any Windows even if python is not installed.
I would like it to be python 3.6 and so it has only pip and setup tools installed.
EDIT: concerning duplicate
not quite. I don't want to compile the code. I wanted to give them .py files but realize that Windows won't have python installed on default. I want something that can be carry on a flash drive but will run my code from source not binary.
Please correct me, if I understood it wrong. I think there are at least two ways to do it.
suppose you have one portable_run.py script you want to run everywhere on a flashdisk.
Make a exe file with pyinstaller for example. you can get a exe file like portable_run.exe. On target windows system what you need to do is to run the exe direcltly protable_run.exe
Use a portable python distribution like winpython or python-xy. you just need to copy this portable distribution on the flash disk together with your portable_run.py. To run it on target system flashdisk/path-of-winpython/python portable_run.py
Hopefully it could give you some idea.
I also encountered the same problem and managed to create a portable python with Python's official Windows embeddable package.
I wrote the steps into a ps1 script so I can easily repeat the process without going through the pain.
The steps:
Download the portablepy.ps1 from the repo :
https://github.com/Dreamsavior/portable-python-maker
Create a blank folder, put the portablepy.ps1 to that folder.
Execute the portablepy.ps1
The script will create a portable python 3.9.10 with pip in the current folder by default.
To install custom version of Python run the script with -source and -destination parameter
.\portablepy.ps1 -source "https://www.python.org/ftp/python/3.9.10/python-3.9.10-embed-amd64.zip" -destination "C:\SomeDir\PortablePython\"
Where the -source is the url of the Python's Windows embeddable package from this page: https://www.python.org/downloads/windows/
And -destination is the path of your folder (ended with backslash).
I'm trying to convert a fairly simple Python program to an executable and couldn't find what I was looking for, so I have a few questions (I'm running Python 3.6):
The methods of doing this that I have found so far are as follows
downloading an old version of Python and using pyinstaller/py2exe
setting up a virtual environment in Python 3.6 that will allow me to do 1.
downloading a Python to C++ converter and using that.
Here is what I've tried/what problems I've run into.
I installed pyinstaller before the required download before it (pypi-something) so it did not work. After downloading the prerequisite file, pyinstaller still does not recognize it.
If I'm setting up a virtualenv in Python 2.7, do I actually need to have Python 2.7 installed?
similarly, the only python to C++ converters I see work only up until Python 3.5 - do I need to download and use this version if attempting this?
Steps to convert .py to .exe in Python 3.6
Install Python 3.6.
Install cx_Freeze, (open your command prompt and type pip install cx_Freeze.
Install idna, (open your command prompt and type pip install idna.
Write a .py program named myfirstprog.py.
Create a new python file named setup.py on the current directory of your script.
In the setup.py file, copy the code below and save it.
With shift pressed right click on the same directory, so you are able to open a command prompt window.
In the prompt, type python setup.py build
If your script is error free, then there will be no problem on creating application.
Check the newly created folder build. It has another folder in it. Within that folder you can find your application. Run it. Make yourself happy.
See the original script in my blog.
setup.py:
from cx_Freeze import setup, Executable
base = None
executables = [Executable("myfirstprog.py", base=base)]
packages = ["idna"]
options = {
'build_exe': {
'packages':packages,
},
}
setup(
name = "<any name>",
options = options,
version = "<any number>",
description = '<any description>',
executables = executables
)
EDIT:
be sure that instead of myfirstprog.py you should put your .pyextension file name as created in step 4;
you should include each imported package in your .py into packages list (ex: packages = ["idna", "os","sys"])
any name, any number, any description in setup.py file should not remain the same, you should change it accordingly (ex:name = "<first_ever>", version = "0.11", description = '' )
the imported packages must be installed before you start step 8.
Python 3.6 is supported by PyInstaller.
Open a cmd window in your Python folder (open a command window and use cd or while holding shift, right click it on Windows Explorer and choose 'Open command window here'). Then just enter
pip install pyinstaller
And that's it.
The simplest way to use it is by entering on your command prompt
pyinstaller file_name.py
For more details on how to use it, take a look at this question.
There is an open source project called auto-py-to-exe on GitHub. Actually it also just uses PyInstaller internally but since it is has a simple GUI that controls PyInstaller it may be a comfortable alternative. It can also output a standalone file in contrast to other solutions. They also provide a video showing how to set it up.
GUI:
Output:
Alternatively use pyinstaller directly:
pip install pyinstaller
pyinstaller filename
I can't tell you what's best, but a tool I have used with success in the past was cx_Freeze. They recently updated (on Jan. 7, '17) to version 5.0.1 and it supports Python 3.6.
Here's the pypi
https://pypi.python.org/pypi/cx_Freeze
The documentation shows that there is more than one way to do it, depending on your needs.
http://cx-freeze.readthedocs.io/en/latest/overview.html
I have not tried it out yet, so I'm going to point to a post where the simple way of doing it was discussed. Some things may or may not have changed though.
How do I use cx_freeze?
Now you can convert it by using PyInstaller. It works with even Python 3.
Steps:
Fire up your PC
Open command prompt
Enter command pip install pyinstaller
When it is installed, use the command 'cd' to go to the working directory.
Run command pyinstaller <filename>
I've been using Nuitka and PyInstaller with my package, PySimpleGUI.
Nuitka
There were issues getting tkinter to compile with Nuikta. One of the project contributors developed a script that fixed the problem.
If you're not using tkinter it may "just work" for you. If you are using tkinter say so and I'll try to get the script and instructions published.
PyInstaller
I'm running 3.6 and PyInstaller is working great!
The command I use to create my exe file is:
pyinstaller -wF myfile.py
The -wF will create a single EXE file. Because all of my programs have a GUI and I do not want to command window to show, the -w option will hide the command window.
This is as close to getting what looks like a Winforms program to run that was written in Python.
[Update 20-Jul-2019]
There is PySimpleGUI GUI based solution that uses PyInstaller. It uses PySimpleGUI. It's called pysimplegui-exemaker and can be pip installed.
pip install PySimpleGUI-exemaker
To run it after installing:
python -m pysimplegui-exemaker.pysimplegui-exemaker
The best and easiest way is auto-py-to-exe for sure, and I have given all the steps and red flags below which will take you just 5 mins to get a final .exe file as you don't have to learn anything to use it.
1.) It may not work for python 3.9 on some devices I guess.
2.) While installing python, if you had selected 'add python 3.x to path', open command prompt from start menu and you will have to type pip install auto-py-to-exe to install it. You will have to press enter on command prompt to get the result of the line that you are typing.
3.) Once it is installed, on command prompt itself, you can simply type just auto-py-to-exe to open it. It will open a new window. It may take up to a minute the first time. Also, closing command prompt will close auto-py-to-exe also so don't close it till you have your .exe file ready.
4.) There will be buttons for everything you need to make a .exe file and the screenshot of it is shared below. Also, for the icon, you need a .ico file instead of an image so to convert it, you can use https://convertio.co/
5.) If your script uses external files, you can add them through auto-py-to-exe and in the script, you will have to do some changes to their path. First, you have to write import sys if not written already, second, you have to make a variable for eg, location=getattr(sys,"_MEIPASS",".")+"/", third, the location of example.png would be location+"/example.png" if it is not in any folder.
6.) If it is showing any error, it may probably be because of a module called setuptools not being at the latest version. To upgrade it to the latest version, on command prompt, you will have to write pip install --upgrade setuptools. Also, in the script, writing import setuptools may help. If the version of setuptools is more than 50.0.0 then everything should be fine.
7.) After all these steps, in auto-py-to-exe, when the conversion is complete, the .exe file will be in the folder that you would have chosen (by default, it is 'c:/users/name/output') or it would have been removed by your antivirus if you have one. Every antivirus has different methods to restore a file so just experiment if you don't know.
Here is how the simple GUI of auto-py-to-exe can be used to make a .exe file.
PyOxidizer can be an option here. It's pretty popular with 3.3k stars on Github. Its documentation says
PyOxidizer is capable of producing a single file executable - with a copy of Python and all its dependencies statically linked and all resources (like .pyc files) embedded in the executable. You can copy a single executable file to another machine and run a Python application contained within. It just works.
While I'm not sure if it is capable of producing .exe file PyOxidizer definitely helps with packaging and distribution.
I have coded a program in Python 3.5 that uses the Tkinter import. I'm trying to figure out a way to run it on computers that don't have Python. First I tried freezing it but I haven't been able to because none of the freezing tools I found support Python 3.5. Then I tried possibly using a online idle but I couldn't find any that support Tkinter. I would prefer to be able to get a .exe file or something similar but if I could run it online that would be good too any ideas?
EDIT
So I have now successfully downloaded PyInstaller using pip. My current problem is when I type this into the console: pyinstaller.exe --onefile --windowed Finder.py
I get this error: 'pyinstaller.exe' is not recognized as an internal or external command,
operable program or batch file.
EDIT
I have now found the pathway to pyinstaller.exe. Now when I try to use it it says Access is denied.
I finally figured it out after about three days of work. Fist I downloaded PyInstaleller in the zipped form and extracted it. Then I put my program in the PyInstaller folder. Then I opened a regular command prompt. I then typed cd then the location of the PyInstaller folder. Finally I typed pyinstaller.py --one file --windowed program.py. Then when I went into the PyInstaller folder there was a folder called program with the .exe file in the dist folder. Thanks everyone for all of your help!
You can use pyinstaller to do that. I think its work fine on linux em linux.
Another option is use py2exe.
Try pyinstaller -F -w Finder.py as the command or you could check out CxFreeze.