I have problem with create virtual environment in PyCharm.
Exactly, Python in version 3.10 was add to Path during installation and I use latest version PyCharm community.
Did anyone have a similar problem?
Adding Informations
How I create environment :
file -> New project
Location : D:\mm\projekty\pythonProject2
marked New virtual environment using ( virtualenv)
Location : D:\mm\projekty\pythonProject2\venv
Base interpreter : C:\Users\mm\AppData\Local\Programs\Python\Python310\python.exe
In CMD:
C:\Users\mm>python
Python 3.10.0 (tags/v3.10.0:b494f59, Oct 4 2021, 19:00:18) [MSC v.1929 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
I had the same problem. I needed to install package python3-venv.
In order to fix this, I had to run from my terminal:
pip install virtualenv
After installing the virtualenv package everything works as expected.
If you have python3-env already installed, the commands provided in most of the answers will not work as you need the python3-venv package specifically for Python 3.10
The exact package as pointed by #fabel in comments is python3.10-venv .
sudo apt install python3.10-venv
Run this command and it should be good to go.
I attempted the previous answers and eventually found that I had to delete the venv folder and allow PyCharm to recreate it.
In my case, I didn't have pip installed on my computer.
just open your terminal and install pip package:
In ubuntu:
sudo apt install pip
For windows:
https://phoenixnap.com/kb/install-pip-windows
Then try to create the virtual environment again
A possible reason could be not having the package virtualevn installed in your computer. I had the problem after reinstalling OS.
The following is valid for ubuntu OS with Python3 installed.
Check if the pip is installed after installing Python.
Use the command sudo apt install python3-pip.
Once pip installed, install the package using pip3 install virtualenv.
Then go back to Pycharm IDE settings to set up the venv.
I had the same problem, but solved it by adding an interpreter manually.
In my case i wasn't the owner of the project file. I was needed to run the CHOWN command to resolve this.
sudo chown $USER /Users/Sites/***<Project_Folder>***
and i was done.
In my case, there was something wrong with the latest PyCharm Community Edition of 2022.2.3 version (build ID: 222.4345.23). I tried everything mentioned here with no vain. After spending several hours, just downgraded to version 2021.3.2 version of PyCharm community edition, and it just worked. Hope this helps.
I ran "pip install virtualenv" in the terminal,
but after trying again it didn't work.
I downloaded python 3.10 from python.org
then because i had problems updating my python version from 3.9 to 3.10 on my computer, i decided to try to make a virtual environment in PyCharm, in my main project (my only one) I clicked "Add Interpreter..." then selected "Virtualenv environment" then set the location to "/home/myname/Documents/PyCharm/venvPy3.10" and then i set base interpreter to the one i downloaded by clicking on the three dots on the right of it then going to my downloads folder. I also selected both "Inherit global site-packages" and "Make available to all project" then clicked "OK".
Then it gives me warning.
There is a bug in Windows venv, which is known to be exposed if you install a VisualStudio 2022 runtime. If PyCharm uses venv and not another virtual environment (not sure as I don't use PyCharm) s See if my issue/workaround in this Q&A aligns with yours.
Edit: I realize that you are using virtualenv instead. However, virtualenv uses venv.EnvBuilder so the issue could still be related.
if you don't have pip before install pip
sudo apt install python3-pip
press Ctrl + Alt + S
then click settings button and select show all
press Alt + Insert keys then
Select Virtualenv Environment and check Inherit global site-packages
If someone is still not able to fix this then, create it manually.
go in the dir that you want the venv in, then python3.10 -m venv <name of venv>
source <name of venv>/bin/activate
go in Python
Interpeter settings and then select the location of the manually
created venv in the 'existing environment'
I had same problem tried many things
But I realized that Window Defender is blocking PyCharm to create virtual environment
Just go in Defender Settings and allow PyChram
I had same issue with following version.
pycharm - PyCharm 2022.1.3 (Community Edition)
python - python 3.9
Once I changed interpreter version to python 3.10. It started working.
I ran into the same problem, but was able to resolve it in my environment.
Go to Help -> Edit Custom VM Options and add the following
-Dfile.encoding=UTF-8
Here is my environment:
Windows 11
PyCharm Community 2022.2.3 (installed from JetBrains ToolBox)
Python 3.11 (installed from microsoft store)
I had the same error and I don't know how the solution that I'll explain solved
I was naming the project as "Joining Data with pandas", "joining_data_with_pandas"
but when I changed the name to "joiningDataPandas", it works with no error.
I think it may be a bug from the ide or something, because if I tried to create a new project with the old name that has spaces or "_" the error will be back, but with writing the project name with the camelCase, there is no error.
Open and clear the log: %AppData%\Local\JetBrains\PyCharmCE2022.1\log\idea.log
(in PyCharm click Help > Show Log in Explorer).
Try to create VirtualEnv via PyCharm, you will see
the "Failed to create Venv..." message
Open the log and look for errors In my case it was unable to import some modules because the threading module was not found (ie: ModuleNotFoundError: No module named 'threading'). My python3.10 was broken, maybe I have some problems with my PATH variable.
I was missing the modules threading, logging, and weakref, so I just copied them to %AppData%\Local\Programs\Python\Python310\Lib\ (from site-packages folder, in my case)
Enjoy creating as many VENV's as you needed. If you still have an error in PyCharm then repeat steps 2, 3, and 4 until you fix all errors about missing modules or other.
I fixed this problem by first deleting my current venv folder. Then I went back to PyCharm to Configure Local Environment>Add Local Interpreter> and made sure the location is in an empty directory. I did this by just adding /venv at the end of my path.
You should create virtualenv manually
1.open pycharm
2.File >> Settings >> Project: (your project name) >> Python Interpreter
3.click on Add interpreter >> Add local Interpreter
4.click on Virtualenv Environment
5.Environment : click on New
6.Location : your project location
7.Base Interpreter : python location
8.click on OK
That's it. Your virtual environment is create
I faced the same problem. In my case, algorithm of solution was as follows:
Check PyCharm Log (Help > Show Log in Explorer)
According to the log the problem was:
2022-12-18 19:20:04,774 [1212498] WARN - #c.j.p.s.PySdkUtil - Charset x-windows-950 is not UTF-8, which is likely lead to troubles
In my Win10 Administrative panel I enabled UTF-8: Region and Language > Administrative > Change system locale... > Check the checkbox Beta: Use Unicode UTF-8 for worldwide language support.
Restart Windows.
In my case problem was solved.
I was running the Django project without any problems. Until I reinstalled Windows and then reinstalled vscode! Now that I am running the Django project, vscode shows the following error:
Error: no python at C:\Users\AccountName\AppData\Local\Programs\Python\Python38-32\python.exe
This might be occurs if the python directory still in the environment variables path list.
First remove python entry from the environment variables path if exists.
Also there will be a chance for virtual environments in your project. If the virtual environment is setup in the uninstalled python version then you will get the same error message.
So, remove the virtual environments which is created under the uninstalled python. It can be done by deleting the virtual environment folder from your system.
Edit pyvenv.cfg
home = C:\Users\UserName\AppData\Local\Programs\Python\Python38-32
include-system-site-packages = false
version = 3.8.3
When I edited this file after checking the file path on my computer, it worked for me.
Based on the information you provided, it is recommended that you check the Python environment variables.
Since the Windows system is reinstalled, the environment variables are restored to the default settings. Therefore, please add Python environment variables:
Or you can reinstall Python and check the "Add Python 3.8 to PATH" option, which will automatically add Python environment variables.
You could also refer to : Python environment variables.
It's very simple
Delete your dbsqite3 file from your project folder
Open your project in CMD
install virtual environment pip install virtaualenv
virtualenv .
\scripts\activate
python manage.py runserver
and play with your code
you shared.
This works for Pycharm, It did to me
From your projects folder, delete the 3 folders i.e. .ide,venv, and the third folder i think.. do not touch the projects or scripts you created. After wards, go to Pycharm and configure python interpreter again. This will now enable you to run yo scripts now with no prob
make sure to install virtualenv befor install python
check wheather django is installed (if your are using django framework).
pip install django
So here is my story:
As we know macos comes with pyhton 2.7 preinstalled. Years ago, I installed python 3.7.0 and all going good. I started working with Tensorflow and during that time tensorflow wasn't compatible with 3.7.0 so switch the version to 3.6.6 somehow :). After some time i installed anaconda and it installed 3.7.3.
At this point:
When i open my python IDLE shell, it runs on 3.6.6
anaconda Jupiter notebook shows 3.7.3.
Then i learned to create virtual environments through terminal and i use following code to create virtual environment:
pip install virtualenv
virtualenv project_env
And after i activate the virtual environment the python version it shows is 3.7.3.
Then recently i changed the terminal shell to zsh and now everything is kind of messed up. I'm
Terminal can't find conda commands. How to fix that?
Now i can't create virtual environment through virtualenv project_env. It says command not found. Why? It use to create virtual environments with python 3.7.3.
Now to create virtual environment i use python3 -m venv project_env this creates the virtual environment with python 3.6.6. If i use python3.7 -m venv project_env it creates environment with python 3.7.0.
I can't find a way to create virtual environments with python 3.7.3.
I need help with above troubles caused after installing zsh and help with accessing python versions wherever i need. How do i update python version 3.7.0 to latest or any specific version like 3.7.3. Hows python 3.8.4 to use, i mean like i had trouble importing tensorflow in python 3.7.0.
I hope you will understand my trouble and searched a lot for solutions. I'm so confused right now, couldn't even figure out the title of my problem.
Based on the fact your shell can't find conda now, you should look at your "path" environment variable. Whenever you change from one shell to another, you need to look at and possible create or modify the files the shell uses upon startup. These files setup your environment (PATH, PYTHONPATH, etc), create aliases, etc. You may need to create the .zshrc, .zprofile, .zlogin etc files and add the same settings as your previous shell's startup files.
Example:
If you used the bash shell previously you would need to modify the .zshrc file to include your settings in the .bashrc file. Syntax may be different, so a straight copy may or may not work.
Try this as a quick temporary fix (may or may not work, depending on your current ~/.profile settings:
Create a ~/.zprofile file with this code inside:
emulate sh
. ~/.profile
emulate zsh
references:
https://superuser.com/questions/187639/zsh-not-hitting-profile
http://zsh.sourceforge.net/Intro/intro_3.html
The interpreter I use is
and it works in virtual environment. I have both anaconda and python interpreter installed in my system
But if I want to install something using pip for instance "Flask" then it happens
I am using Linux Mint 18.1 Serena"
And the way I tried to create the virtual environment is
Lastly there is no space in the directories where I tried to create virtual environment
Then I tried this link
Specifically the following commands
All those things didn't solve my problem and lastly I ended with the following errors each time I open my shell
Then I change my source of bashrc & bashrc-org to
virtualenv
export WORKON_HOME=~/virtualenvs
source /home/cryptosilicon/anaconda3/bin/python
Now get the following error
How do I correct the error and make the pip work inside virtual environment ?
I just solved (or at least found a work-around) for a similar problem.
I am using Linux Mint 18 and python 3.
I was trying to install a dependency inside a Python virtual environment using pip and it would fail (and actually pretty much mess up my whole virtual env).
The message was : "bad interpreter: No such file or directory".
But I noticed that the referenced path was actually truncated at the first space.
So I tested an virtual env in a folder for which path there is no space and it worked.
Good afternoon. I have been learning Virtualenv and Virtualenvwrapper. I then decided I wanted to install Anaconda Python again so I could continue learning how to do data analysis. Then I saw where you can use conda to make a virtual environment for Anaconda. I installed it and told it not to add the path to my bashrc file but then conda was not recognized. So then I reinstalled and said yes. But now my global python is set to anaconda 3.5 which I do not want. How can I use conda to set up a virtual environment without affecting my global python of 2.7? Thank you.
fix your PATH environment variable so it has the global python directory declared before the anacaonda directory.
I was looking into a similar issue and I ended up using Docker to manage my Anaconda installation.
https://github.com/jupyter/docker-stacks/tree/master/minimal-notebook