I got this error while installing Spyder in Ubuntu 20.04 with Python 3.7. It installs perfectly with Python 3.8 without any issue. Please help to fix this error.
Building wheels for collected packages: psutil, ujson
Building wheel for psutil (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/ranick/.virtualenvs/ml/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-gkngqlcn/psutil/setup.py'"'"'; __file__='"'"'/tmp/pip-install-gkngqlcn/psutil/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-ioxnwy6h
cwd: /tmp/pip-install-gkngqlcn/psutil/
Complete output (44 lines):
running bdist_wheel
Related
i tried to install py curl but i get this error...
pip install pycurl
Collecting pycurl
Using cached pycurl-7.43.0.6.tar.gz (222 kB)
ERROR: Command errored out with exit status 10:
command: 'c:\users\lequi\appdata\local\programs\python\python38-32\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\lequi\\AppData\\Local\\Temp\\pip-install-vgtj42e_\\pycurl\\setup.py'"'"'; __file__='"'"'C:\\Users\\lequi\\AppData\\Local\\Temp\\pip-install-vgtj42e_\\pycurl\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base 'C:\Users\lequi\AppData\Local\Temp\pip-pip-egg-info-y5vol4q7'
cwd: C:\Users\lequi\AppData\Local\Temp\pip-install-vgtj42e_\pycurl\
Complete output (1 lines):
Please specify --curl-dir=/path/to/built/libcurl
----------------------------------------
ERROR: Command errored out with exit status 10: python setup.py egg_info Check the logs for full command output.
Can someone Help?
An answer was already given here. Try downloading and compiling pycurl manually
Collecting PyAudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Using legacy setup.py install for PyAudio, since package 'wheel' is not installed.
Installing collected packages: PyAudio
Running setup.py install for PyAudio ... error
ERROR: Command errored out with exit status 1:
command: 'c:\python 3.8\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\Users\spogm\AppData\Local\Temp\pip-install-wul1u7y7\PyAudio\setup.py'"'"'; __
file__='"'"'C:\Users\spogm\AppData\Local\Temp\pip-install-wul1u7y7\PyAudio\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"
'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record 'C:\Users\spogm\AppData\Local\Temp\pip-record-m6e8jsq4\install-record.txt' --single-version-externally-
managed --compile --install-headers 'c:\python 3.8\Include\PyAudio'
cwd: C:\Users\spogm\AppData\Local\Temp\pip-install-wul1u7y7\PyAudio
Complete output (9 lines):
running install
running build
running build_py
creating build
creating build\lib.win32-3.8
copying src\pyaudio.py -> build\lib.win32-3.8
running build_ext
building '_portaudio' extension
error: Microsoft Visual C++ 14.0 is required. Get it with "Build Tools for Visual Studio": https://visualstudio.microsoft.com/downloads/
----------------------------------------
ERROR: Command errored out with exit status 1: 'c:\python 3.8\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\Users\spogm\AppData\Local\Temp\pip-install-wul
1u7y7\PyAudio\setup.py'"'"'; file='"'"'C:\Users\spogm\AppData\Local\Temp\pip-install-wul1u7y7\PyAudio\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.
read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record 'C:\Users\spogm\AppData\Local\Temp\pip-record-m6e8jsq4\install-record.
txt' --single-version-externally-managed --compile --install-headers 'c:\python 3.8\Include\PyAudio' Check the logs for full command output.
if you are using windows:
Go to: https://www.lfd.uci.edu/~gohlke/pythonlibs/#pyaudio
Download the file and then go to its directory in the cmd and type:
For win 32 bit:
pip install PyAudio‑0.2.11‑cp37‑cp37m‑win32.whl
For win 64 bit:
pip install PyAudio‑0.2.11‑cp38‑cp38‑win_amd64.whl
I would like to use python-saml for sso integration with flask web app. while I am trying to install python-saml package using pip install python-saml, I am getting the below error message.
(myvenv) C:\Users\sekar>pip install python3-saml==1.9.0
Collecting python3-saml==1.9.0
Using cached python3_saml-1.9.0-py3-none-any.whl (72 kB)
Collecting xmlsec>=0.6.0
Using cached xmlsec-1.3.3.tar.gz (29 kB)
Building wheels for collected packages: xmlsec
Building wheel for xmlsec (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: 'C:\Users\sekar\AppData\Local\conda\conda\envs\myvenv\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"'; __file__='"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d 'C:\Users\sekar\AppData\Local\Temp\16\pip-wheel-39e4ydgb'
cwd: C:\Users\sekar\AppData\Local\Temp\16\pip-install-9x0le85b\xmlsec\
Complete output (5 lines):
running bdist_wheel
running build
running build_ext
error: HTTP Error 404: The specified blob does not exist.
Retrieving "https://ci.appveyor.com/api/buildjobs/hij3a6776pdv2007/artifacts/libxml2-2.9.4.win64.zip" to "build/extra\libxml2-2.9.4.win64.zip"
----------------------------------------
ERROR: Failed building wheel for xmlsec
Running setup.py clean for xmlsec
Failed to build xmlsec
Installing collected packages: xmlsec, python3-saml
Running setup.py install for xmlsec ... error
ERROR: Command errored out with exit status 1:
command: 'C:\Users\sekar\AppData\Local\conda\conda\envs\myvenv\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"'; __file__='"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sekar\AppData\Local\Temp\16\pip-record-l_q25m6k\install-record.txt' --single-version-externally-managed --compile --install-headers 'C:\Users\sekar\AppData\Local\conda\conda\envs\myvenv\Include\xmlsec'
cwd: C:\Users\sekar\AppData\Local\Temp\16\pip-install-9x0le85b\xmlsec\
Complete output (5 lines):
running install
running build
running build_ext
error: HTTP Error 404: The specified blob does not exist.
Retrieving "https://ci.appveyor.com/api/buildjobs/hij3a6776pdv2007/artifacts/libxml2-2.9.4.win64.zip" to "build/extra\libxml2-2.9.4.win64.zip"
----------------------------------------
ERROR: Command errored out with exit status 1: 'C:\Users\sekar\AppData\Local\conda\conda\envs\myvenv\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"'; __file__='"'"'C:\\Users\\sekar\\AppData\\Local\\Temp\\16\\pip-install-9x0le85b\\xmlsec\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\sekar\AppData\Local\Temp\16\pip-record-l_q25m6k\install-record.txt' --single-version-externally-managed --compile --install-headers 'C:\Users\sekar\AppData\Local\conda\conda\envs\myvenv\Include\xmlsec' Check the logs for full command output.
I tried with conda install python-saml, same error also they stopped this package 2 years before. even I tried python3-saml
the core issue is in xmlsec package..
is there any conda channels or PYPI provide this package?
Update
Since version 1.3.7, prebuilt wheels of xmlsec for Windows are published on PyPI, so you shouldn't experience this issue anymore.
Original answer
I have rebuilt xmlsec windows wheels and uploaded them to the releases page of my fork. To install, first install xmlsec passing the additional PyPI index:
$ pip install xmlsec --extra-index-url=https://hoefling.io/pypi
The added index just proxies install request to Github releases.
Now install python3-saml:
$ pip install python3-saml
(Alternative) Selecting the dist manually
You can manually find the wheel matching your Python installation from the releases page and install it using a direct link, e.g.
$ python -c "from pip._internal.pep425tags import get_supported; print(*get_supported()[0], sep='-')"
cp37-cp37m-win_amd64
# the matching wheel is thus xmlsec-1.3.6.post1-cp37-cp37m-win_amd64.whl
$ pip install https://github.com/hoefling/xmlsec/releases/download/1.3.6.post1/xmlsec-1.3.6.post1-cp37-cp37m-win_amd64.whl
(Optional) Verify xmlsec works by invoking the tests
I have executed tests against all built wheels (check out this job log on Appveyor), but you can also run the tests locally to verify xmlsec installation is working:
$ git clone https://github.com/mehcode/python-xmlsec.git && cd python-xmlsec
$ pip install pytest
$ pytest tests/
Never used python-saml here... However, while searching this error, I found these GitHub issues: Issue 1 and Issue 2
Both of them talk about a problem with dm.xmlsec.binding.
Best,
Felipe
I am new to python notebook and python. I'm currently taking python for data science on LinkedIn learning, and I'm running into problem below and couldn't find the solution.
''''! pip3 install plotly''''
Collecting plotly
Using cached https://files.pythonhosted.org/packages/15/90/918bccb0ca60dc6d126d921e2c67126d75949f5da777e6b18c51fb12603d/plotly-4.6.0-py2.py3-none-any.whl
Requirement already satisfied: six in ./Library/Python/3.8/lib/python/site-packages (from plotly) (1.14.0)
Collecting retrying>=1.3.3 (from plotly)
Using cached https://files.pythonhosted.org/packages/44/ef/beae4b4ef80902f22e3af073397f079c96969c69b2c7d52a57ea9ae61c9d/retrying-1.3.3.tar.gz
Installing collected packages: retrying, plotly
Running setup.py install for retrying ... error
ERROR: Command errored out with exit status 1:
command: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-install-br5inttz/retrying/setup.py'"'"'; __file__='"'"'/private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-install-br5inttz/retrying/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-record-w8sk2i31/install-record.txt --single-version-externally-managed --compile
cwd: /private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-install-br5inttz/retrying/
Complete output (9 lines):
running install
running build
running build_py
creating build
creating build/lib
copying retrying.py -> build/lib
running install_lib
copying build/lib/retrying.py -> /Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/site-packages
error: could not create '/Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/site-packages/retrying.py': Permission denied
----------------------------------------
ERROR: Command errored out with exit status 1: /Library/Frameworks/Python.framework/Versions/3.8/bin/python3.8 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-install-br5inttz/retrying/setup.py'"'"'; __file__='"'"'/private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-install-br5inttz/retrying/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /private/var/folders/xz/w52k1b9n2935_w13djkjn9pc0000gn/T/pip-record-w8sk2i31/install-record.txt --single-version-externally-managed --compile Check the logs for full command output.
WARNING: You are using pip version 19.2.3, however version 20.0.2 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Try:
pip install plotly==4.6.0 --user
https://plotly.com/python/getting-started/
don't let me install the lib machine.
I have installed the new version of python 3.8X 64bit, and I need the machine library but it gives me error status 1 and then status 2.
Why does it happen to me and how do I solve this problem?
HOW INSTALL MACHINE??
Using cached machine-0.0.1-py2.py3-none-any.whl (4.2 kB)
Collecting pycrypto
Using cached pycrypto-2.6.1.tar.gz (446 kB)
Building wheels for collected packages: pycrypto
Building wheel for pycrypto (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: 'c:\users\javier.gutierrez\appdata\local\programs\python\python38-32\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-4736ysct\\pycrypto\\setup.py'"'"'; __file__='"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-4736ysct\\pycrypto\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d 'C:\Users\javier.gutierrez\AppData\Local\Temp\pip-wheel-bc38nqbl'
cwd: C:\Users\javier.gutierrez\AppData\Local\Temp\pip-install-4736ysct\pycrypto\
Complete output (183 lines):
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win32-3.8
creating build\lib.win32-3.8\Crypto
.......................
----------------------------------------
ERROR: Command errored out with exit status 1: 'c:\users\javier.gutierrez\appdata\local\programs\python\python38-32\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-4736ysct\\pycrypto\\setup.py'"'"'; __file__='"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-4736ysct\\pycrypto\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\javier.gutierrez\AppData\Local\Temp\pip-record-g2ah2ovt\install-record.txt' --single-version-externally-managed --compile --install-headers 'c:\users\javier.gutierrez\appdata\local\programs\python\python38-32\Include\pycrypto' Check the logs for full command output.```
_______________________________________________________________________________
[[[[[[[_You are therefore probably looking for another module, since you tagged micropython, maybe this one? neither does it allow me to install the upython lib._
_I have redrawn all and added the path besides checking that this 64bits_
**thanks for your help**]]]]]]]]
_________________________________________________________________________________
Collecting micropython-machine
Using cached micropython-machine-0.2.tar.gz (1.7 kB)
ERROR: Command errored out with exit status 1:
command: 'c:\python\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-d28uahkh\\micropython-machine\\setup.py'"'"'; __file__='"'"'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-d28uahkh\\micropython-machine\_, '"'"'exec'"'"'))' egg_info --egg-base 'C:\Users\javier.gutierrez\AppData\Local\Temp\pip-install-d28uahkh\micropython-machine\pip-egg-info'
cwd: C:\Users\javier.gutierrez\AppData\Local\Temp\pip-install-d28uahkh\micropython-machine\
Complete output (5 lines):
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "c:\python\lib\tokenize.py", line 392, in open
buffer = _builtin_open(filename, 'rb')
FileNotFoundError: [Errno 2] No such file or directory: 'C:\\Users\\javier.gutierrez\\AppData\\Local\\Temp\\pip-install-d28uahkh\\micropython-machine\\setup.py'
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.```
I have installed the new version of python 3.8X 64bit
No, you have python 3.8 32 bit, as your path suggests:
c:\users\javier.gutierrez\appdata\local\programs\python\ python38-32
Also your error suggests that it is trying to build for 32 bit:
creating build\lib.win32
Why does it happen to me
The module you are trying to install has pycrypto as a requirement, which has not been updated since 2014 and is only compatible up to python 3.5. It is also insecure and should not be used.
Looking at the module you are trying to install which is this one, it is pretty much empty, containing only an example setup.py and an example __init__.py.
You are therefore probably looking for another module, since you tagged micropython, maybe this one?