We Keep Coding

Detect thick black lines in image with OpenCV

I have the following image of a lego board with some bricks on it
Now I am trying to detect the thick black lines (connecting the white squares) with OpenCV. I have already experimented a lot with HoughLinesP, converted the image to gray or b/w before, applied blur, ...
Nonthing led to usable results.
# Read image
img = cv2.imread('image.jpg', cv2.IMREAD_GRAYSCALE)
# Resize Image
img = cv2.resize(img, (0,0), fx=0.25, fy=0.25)
# Initialize output
out = cv2.cvtColor(img, cv2.COLOR_GRAY2BGR)
# Median blurring to get rid of the noise; invert image
img = cv2.medianBlur(img, 5)
# Adaptive Treshold
bw = cv2.adaptiveThreshold(img,255,cv2.ADAPTIVE_THRESH_GAUSSIAN_C,\
cv2.THRESH_BINARY,15,8)
# HoughLinesP
linesP = cv2.HoughLinesP(bw, 500, np.pi / 180, 50, None, 50, 10)
# Draw Lines
if linesP is not None:
for i in range(0, len(linesP)):
l = linesP[i][0]
cv2.line(out, (l[0], l[1]), (l[2], l[3]), (0,0,255), 3, cv2.LINE_AA)
The adaptive treshold lets you see edges quite well, but with HoughLinesP you don't get anything usable out of it
What am I doing wrong?
Thanks, both #fmw42 and #jeru-luke for your great solutions to this problem! I liked isolating / masking the green board, so I combined both:
import cv2
import numpy as np
img = cv2.imread("image.jpg")
scale_percent = 50 # percent of original size
width = int(img.shape[1] * scale_percent / 100)
height = int(img.shape[0] * scale_percent / 100)
dim = (width, height)
# resize image
img = cv2.resize(img, dim, interpolation = cv2.INTER_AREA)
lab = cv2.cvtColor(img, cv2.COLOR_BGR2LAB)
a_component = lab[:,:,1]
# binary threshold the a-channel
th = cv2.threshold(a_component,127,255,cv2.THRESH_BINARY_INV+cv2.THRESH_OTSU)[1]
# numpy black
black = np.zeros((img.shape[0],img.shape[1]),np.uint8)
# function to obtain the largest contour in given image after filling it
def get_region(image):
contours, hierarchy = cv2.findContours(image, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
c = max(contours, key = cv2.contourArea)
mask = cv2.drawContours(black,[c],0,255, -1)
return mask
mask = get_region(th)
# turning the region outside the green block white
green_block = cv2.bitwise_and(img, img, mask = mask)
green_block[black==0]=(255,255,255)
# median blur
median = cv2.medianBlur(green_block, 5)
# threshold on black
lower = (0,0,0)
upper = (15,15,15)
thresh = cv2.inRange(median, lower, upper)
# apply morphology open and close
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (3,3))
morph = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (29,29))
morph = cv2.morphologyEx(morph, cv2.MORPH_CLOSE, kernel)
# filter contours on area
contours = cv2.findContours(morph, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
result = green_block.copy()
for c in contours:
area = cv2.contourArea(c)
if area > 1000:
cv2.drawContours(result, [c], -1, (0, 0, 255), 2)
# view result
cv2.imshow("result", result)
cv2.waitKey(0)
cv2.destroyAllWindows()

Here I am presenting a repeated segmentation approach using color.
This answer is based on the usage of LAB color space
1. Isolating the green lego block
img = cv2.imread(image_path)
lab = cv2.cvtColor(img, cv2.COLOR_BGR2LAB)
a_component = lab[:,:,1]
# binary threshold the a-channel
th = cv2.threshold(a_component,127,255,cv2.THRESH_BINARY_INV+cv2.THRESH_OTSU)[1]
th
# function to obtain the largest contour in given image after filling it
def get_region(image):
contours, hierarchy = cv2.findContours(image, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
c = max(contours, key = cv2.contourArea)
black = np.zeros((image.shape[0], image.shape[1]), np.uint8)
mask = cv2.drawContours(black,[c],0,255, -1)
return mask
mask = get_region(th)
mask
# turning the region outside the green block white
green_block = cv2.bitwise_and(img, img, mask = mask)
green_block[black==0]=(255,255,255)
green_block
2. Segmenting the road
To get an approximate region of the road, I subtracted the mask and th.
cv2.subtract() performs arithmetic subtraction, where cv2 will take care of negative values.
road = cv2.subtract(mask,th)
# `road` contains some unwanted spots/contours which are removed using the function "get_region"
only_road = get_region(road)
only_road
Masking only the road segment with the original image gives
road_colored = cv2.bitwise_and(img, img, mask = only_road)
road_colored[only_road==0]=(255,255,255)
road_colored
From the above image only the black regions (road) are present, which is easy to segment:
# converting to grayscale and applying threshold
th2 = cv2.threshold(road_colored[:,:,1],127,255,cv2.THRESH_BINARY_INV+cv2.THRESH_OTSU)[1]
# using portion of the code from fmw42's answer, to get contours above certain area
contours = cv2.findContours(th2, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
result = img.copy()
for c in contours:
area = cv2.contourArea(c)
if area > 1000:
cv2.drawContours(result, [c], -1, (0, 0, 255), 4)
result
Note:
To clean up the end result, you can apply morphological operations on th2 before drawing contours.

Here is one way to do that in Python/OpenCV.
Read the image
Apply median blur
Threshold on black color using cv2.inRange()
Apply morphology to clean it up
Get contours and filter on area
Draw contours on input
Save the result
Input:
import cv2
import numpy as np
# read image
img = cv2.imread('black_lines.jpg')
# median blur
median = cv2.medianBlur(img, 5)
# threshold on black
lower = (0,0,0)
upper = (15,15,15)
thresh = cv2.inRange(median, lower, upper)
# apply morphology open and close
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (3,3))
morph = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (29,29))
morph = cv2.morphologyEx(morph, cv2.MORPH_CLOSE, kernel)
# filter contours on area
contours = cv2.findContours(morph, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
result = img.copy()
for c in contours:
area = cv2.contourArea(c)
if area > 1000:
cv2.drawContours(result, [c], -1, (0, 0, 255), 2)
# save result
cv2.imwrite("black_lines_threshold.jpg", thresh)
cv2.imwrite("black_lines_morphology.jpg", morph)
cv2.imwrite("black_lines_result.jpg", result)
# view result
cv2.imshow("threshold", thresh)
cv2.imshow("morphology", morph)
cv2.imshow("result", result)
cv2.waitKey(0)
cv2.destroyAllWindows()
Threshold image:
Morphology image:
Result:

Find box in the image and save as an image cv2

I am new in computer vision, and I want to create a program which helps me to detect box in the image and save as an image.
and etc...
I tried some code but did not get my desired result.
here is my code and its output.
import cv2
# Load iamge, grayscale, adaptive threshold
image = cv2.imread('image.jpeg')
result = image.copy()
gray = cv2.cvtColor(image,cv2.COLOR_BGR2GRAY)
thresh = cv2.adaptiveThreshold(gray,255,cv2.ADAPTIVE_THRESH_GAUSSIAN_C, cv2.THRESH_BINARY_INV,51,9)
# Fill rectangular contours
cnts = cv2.findContours(thresh, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
cnts = cnts[0] if len(cnts) == 2 else cnts[1]
for c in cnts:
cv2.drawContours(thresh, [c], -1, (255,255,255), -1)
# Morph open
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (9,9))
opening = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel, iterations=4)
# Draw rectangles
cnts = cv2.findContours(opening, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
cnts = cnts[0] if len(cnts) == 2 else cnts[1]
for c in cnts:
x,y,w,h = cv2.boundingRect(c)
cv2.rectangle(image, (x, y), (x + w, y + h), (36,255,12), 3)
cv2.imshow('thresh', thresh)
cv2.imshow('opening', opening)
cv2.imshow('image', image)
cv2.waitKey()
output:

All you need to do is simply first remove the outermost white area, that is, make it black so that we can detect the boxes without any issues using the cv2.RETR_EXTERNAL flag as they are not touching. Then we'll just extract the boxes one by one.
To remove the outmost area, I have used the point polygon test of the contours. If the point (1, 1) lies inside or on a contour, it is not drawn and every other contour will be drawn on a new image. From this new image, I have read the box contours and extracted them.
import cv2
import numpy as np
img = cv2.imread("2lscp.png", cv2.IMREAD_GRAYSCALE)
ret, img = cv2.threshold(img, 50, 255, cv2.THRESH_BINARY+cv2.THRESH_OTSU)
Contours = cv2.findContours(img, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)[-2]
newImg = np.zeros(img.shape, dtype=np.uint8)
for Contour in Contours:
if cv2.pointPolygonTest(Contour, (1, 1), False) == -1:
cv2.drawContours(newImg, [Contour], -1, 255, 1)
Contours = cv2.findContours(newImg, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)[-2]
for Contour in Contours:
[x, y, w, h] = cv2.boundingRect(Contour)
cv2.imshow("box extracted", img[y:y+h, x:x+w])
cv2.waitKey(0)
cv2.destroyAllWindows()

This case seems particularly simple because the image is quasi-binary. Detect the contours of the white regions and select those that have an area like 10 to 15% of the whole image. These are the desired boxes. Then fit a rectangle or rotated rectangle.
No need for additional processing.

Here is solution
try this:
import cv2
import numpy as np
#Read input image
img = cv2.imread('hw_data.png')
#convert from BGR to HSV color space
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
#apply threshold
thresh = cv2.threshold(gray, 30, 255, cv2.THRESH_BINARY)[1]
# find contours and get one with area about 180*35
# draw all contours in green and accepted ones in red
contours = cv2.findContours(thresh, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
contours = contours[0] if len(contours) == 2 else contours[1]
#area_thresh = 0
min_area = 0.95*180*44
max_area = 1.05*180*44
print(min_area)
print(max_area)
result = img.copy()
i = 1
for c in contours:
# print(c)
area = cv2.contourArea(c)
cv2.drawContours(result, [c], -1, (0, 255, 0), 1)
x,y,w,h = cv2.boundingRect(c)
# crop region of img using bounding box
region = result[y:y+h, x:x+w]
# save region to new image
print(region.shape,' i ',i)
# cv2.imwrite("black_region_{0}.png".format(i), region)
i = i + 1
if region.shape[0]>70 and region.shape[1]<100:
cv2.imwrite("black_region_{0}.png".format(i), region)
# break
# if area > min_area and area < max_area:
# cv2.drawContours(result, [c], -1, (0, 0, 255), 1)
# break
# save result
# cv2.imwrite("box_found.png", result)
# show images
# cv2.imshow("GRAY", gray)
# cv2.imshow("THRESH", thresh)
# cv2.imshow("RESULT", result)
# cv2.waitKey(0)

detect an initial/a sketch drawing on a text page

I would like to get the coordinates of the box around the initial ("H") on the following page (and similar ones with other initials, so opencv template matching is not an option):
Following this tutorial, I tried to solve the problem with opencv contours:
import cv2
import matplotlib.pyplot as plt
page = "image.jpg"
# read the image
image = cv2.imread(page)
# convert to RGB
image = cv2.cvtColor(image, cv2.COLOR_BGR2RGB)
# convert to grayscale
gray = cv2.cvtColor(image, cv2.COLOR_RGB2GRAY)
# create a binary thresholded image
_, binary = cv2.threshold(gray, 0,150,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
# find the contours from the thresholded image
contours, hierarchy = cv2.findContours(binary, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
# draw all contours
image = cv2.drawContours(image, contours, 3, (0, 255, 0), 2)
plt.savefig("result.png")
The result is of course not exactly what I wanted:
Does anyone know of an viable algorithm (and possibly an implementation thereof) that could provide an easy solution to my task?

You can find the target area by filtering your contours. Now, there's at least two filtering criteria that you can use. One is filter by area - that is, discard too small and too large contours until you get the contour you are looking for. The other one is by computing the extent of every contour. The extent is the ratio of the contour's area to its bounding rectangle area. You are looking for a square-like contour, so its extent should be close to 1.0.
Let's see the code:
# imports:
import cv2
import numpy as np
# Reading an image in default mode:
inputImage = cv2.imread(path + fileName)
# Deep copy for results:
inputImageCopy = inputImage.copy()
# Convert RGB to grayscale:
grayscaleImage = cv2.cvtColor(inputImage, cv2.COLOR_BGR2GRAY)
# Get binary image via Otsu:
_, binaryImage = cv2.threshold(grayscaleImage, 0, 255, cv2.THRESH_BINARY_INV + cv2.THRESH_OTSU)
The first portion of the code gets you a binary image that you can use as a mask to compute contours:
Now, let's filter contours. Let's use the area approach first. You need to define a range of minimum area and maximum area to filter everything that does not fall in this range. I've heuristically determined a range of areas from 30000 px to 150000 px:
# Find the contours on the binary image:
contours, hierarchy = cv2.findContours(binaryImage, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
# Look for the outer bounding boxes (no children):
for _, c in enumerate(contours):
# Get blob area:
currentArea = cv2.contourArea(c)
print("Contour Area: "+str(currentArea))
# Set an area range:
minArea = 30000
maxArea = 150000
if minArea < currentArea < maxArea:
# Get the contour's bounding rectangle:
boundRect = cv2.boundingRect(c)
# Get the dimensions of the bounding rect:
rectX = boundRect[0]
rectY = boundRect[1]
rectWidth = boundRect[2]
rectHeight = boundRect[3]
# Set bounding rect:
color = (0, 0, 255)
cv2.rectangle( inputImageCopy, (int(rectX), int(rectY)),
(int(rectX + rectWidth), int(rectY + rectHeight)), color, 2 )
cv2.imshow("Rectangles", inputImageCopy)
cv2.waitKey(0)
Once you successfully filter the area, you can then compute the bounding rectangle of the contour with cv2.boundingRect. You can retrieve the bounding rectangle's x, y (top left) coordinates as well as its width and height. After that just draw the rectangle on a deep copy of the original input.
Now, let's see the second option, using the contour's extent. The for loop gets modified as follows:
# Look for the outer bounding boxes (no children):
for _, c in enumerate(contours):
# Get blob area:
currentArea = cv2.contourArea(c)
# Get the contour's bounding rectangle:
boundRect = cv2.boundingRect(c)
# Get the dimensions of the bounding rect:
rectX = boundRect[0]
rectY = boundRect[1]
rectWidth = boundRect[2]
rectHeight = boundRect[3]
# Calculate extent:
extent = float(currentArea)/(rectWidth *rectHeight)
print("Extent: " + str(extent))
# Set the extent filter, look for an extent close to 1.0:
delta = abs(1.0 - extent)
epsilon = 0.1
if delta < epsilon:
# Set bounding rect:
color = (0, 0, 255)
cv2.rectangle( inputImageCopy, (int(rectX), int(rectY)),
(int(rectX + rectWidth), int(rectY + rectHeight)), color, 2 )
cv2.imshow("Rectangles", inputImageCopy)
cv2.waitKey(0)
Both approaches yield this result:

You almost have it. You just need to filter contours on area and aspect ratio. Here is my approach in Python/OpenCV.
Input:
import cv2
import numpy as np
# read image as grayscale
img = cv2.imread('syriados.jpg')
# convert to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# threshold to binary
#thresh = cv2.threshold(gray, 0, 255, cv2.THRESH_BINARY)[1]
thresh = cv2.threshold(gray, 0, 255, cv2.THRESH_BINARY+cv2.THRESH_OTSU)[1]
# invert threshold
thresh = 255 - thresh
# apply morphology to remove small white regions and to close the rectangle boundary
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (3,3))
morph = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
kernel = cv2.getStructuringElement(cv2.MORPH_RECT, (7,7))
morph = cv2.morphologyEx(thresh, cv2.MORPH_CLOSE, kernel)
# find contours
result = img.copy()
cntrs = cv2.findContours(morph, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
cntrs = cntrs[0] if len(cntrs) == 2 else cntrs[1]
# filter on area and aspect ratio
for c in cntrs:
area = cv2.contourArea(c)
x,y,w,h = cv2.boundingRect(c)
if area > 10000 and abs(w-h) < 100:
cv2.drawContours(result, [c], 0, (0,0,255), 2)
# write results
cv2.imwrite("syriados_thresh.jpg", thresh)
cv2.imwrite("syriados_morph.jpg", morph)
cv2.imwrite("syriados_box.jpg", result)
# show results
cv2.imshow("thresh", thresh)
cv2.imshow("morph", morph)
cv2.imshow("result", result)
cv2.waitKey(0)
Threshold image:
Morphology image:
Resulting contour image:

To get a result like this:
You'll need to detect the contour in the image with the second to the greatest area, as the one possessing the greatest area would be the border of the image.
So with the list of contours, we can get the one with the second greatest area via the built-in sorted method, using the cv2.contourArea method as the custom key:
import cv2
import numpy as np
def process(img):
img_gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
img_blur = cv2.GaussianBlur(img_gray, (7, 7), 2)
img_canny = cv2.Canny(img_blur, 50, 50)
kernel = np.ones((6, 6))
img_dilate = cv2.dilate(img_canny, kernel, iterations=1)
img_erode = cv2.erode(img_dilate, kernel, iterations=2)
return img_erode
def get_contours(img):
contours, _ = cv2.findContours(process(img), cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_NONE)
cnt = sorted(contours, key=cv2.contourArea)[-2]
peri = cv2.arcLength(cnt, True)
approx = cv2.approxPolyDP(cnt, 0.02 * peri, True)
cv2.drawContours(img, [approx], -1, (0, 255, 0), 2)
page = "image.jpg"
image = cv2.imread(page)
get_contours(image)
cv2.imshow("Image", image)
cv2.waitKey(0)
The above only puts the area of the contours into consideration; if you want more reliable results, you can make it so that it will only detect contours that are 4-sided.

How to find border coordinates on image using OpenCV and Python

I have to find out automatically coordinates (only one point) where border (object) begin, I do not know how to handle function findContours.
testImage.jpg
image = cv2.imread("testImage.jpg")
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
# Threshold
ret, thresh = cv2.threshold(gray,225,255,0)
# Contours
contours, hierarchy = cv2.findContours(thresh, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
# Here are coordinates that I have to find out
coord = contours[0][1]
# Coordinates to point
point = (coord[0][0],coord[0][1])
# Draw circle on coordinates
cv2.circle(image,point,10,(0,255,0),1)
cv2.imshow("Image", image)
cv2.waitKey()
cv2.destroyAllWindows()
Output
And my goal is find out coordinates anywhere on the border (blue line) - see last image.
Goal
Thanks.

I tweaked your code a little. It seems to do the trick. Check out if it helps:
import cv2
import numpy as np
image = cv2.imread("test.jpg")
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
t = 230 # threshold: tune this number to your needs
# Threshold
ret, thresh = cv2.threshold(gray,t,255,cv2.THRESH_BINARY_INV)
#kernel = np.ones((9,9),np.uint8)
#thresh = cv2.morphologyEx(thresh, cv2.MORPH_OPEN, kernel)
cv2.imshow("thresh", thresh)
cv2.waitKey(1)
# Contours
contours, hierarchy = cv2.findContours(thresh, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
# find the coordinate with the smallest x value
for contour in contours:
coord = min(contour[0], key=lambda c: c[0])
# Coordinates to point
point = (coord[0],coord[1])
#draw circles on coordinates
cv2.circle(image,point,10,(0,255,0),5)
cv2.imshow("Image", image)
cv2.waitKey()
cv2.destroyAllWindows()
Note: Increase parameter t to move your green circle 'farther outside' of the contour. Decrease it to move inside.

#Sparkofska
Thanks for your idea, I use it with another way to find out.
image = cv2.imread('testImage.jpg')
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
t=230
ret, thresh = cv2.threshold(gray,t,255,cv2.THRESH_BINARY_INV)
cv2.imshow("filter", thresh)
# Canny Edge detection
canny = cv2.Canny(thresh, 0, 100)
cv2.imshow("canny", canny)
# Find contours
cnts = cv2.findContours(canny, cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)[-2:]
cnts = cnts[0] if len(cnts) == 2 else cnts[1]
for c in cnts:
x, y, w, h = cv2.boundingRect(c)
# My coordinates
cv2.circle(image,(x,y), 10, (0,255,0), 5)
cv2.imshow("output", image)
cv2.waitKey()
cv2.destroyAllWindows()

How to rotate an image to align the text for extraction?

I am using pytessearct to extract the text from images. But it doesn't work on images which are inclined. Consider the image given below:
Here is the code to extract text, which is working fine on images which are not inclined.
img = cv2.imread(<path_to_image>)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
blur = cv2.GaussianBlur(gray, (5,5),0)
ret3, thresh = cv2.threshold(blur,0,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
def findSignificantContours (img, edgeImg):
contours, heirarchy = cv2.findContours(edgeImg, cv2.RETR_TREE, cv2.CHAIN_APPROX_NONE)
# Find level 1 contours
level1 = []
for i, tupl in enumerate(heirarchy[0]):
# Each array is in format (Next, Prev, First child, Parent)
# Filter the ones without parent
if tupl[3] == -1:
tupl = np.insert(tupl, 0, [i])
level1.append(tupl)
significant = []
tooSmall = edgeImg.size * 5 / 100 # If contour isn't covering 5% of total area of image then it probably is too small
for tupl in level1:
contour = contours[tupl[0]];
area = cv2.contourArea(contour)
if area > tooSmall:
significant.append([contour, area])
# Draw the contour on the original image
cv2.drawContours(img, [contour], 0, (0,255,0),2, cv2.LINE_AA, maxLevel=1)
significant.sort(key=lambda x: x[1])
#print ([x[1] for x in significant]);
mx = (0,0,0,0) # biggest bounding box so far
mx_area = 0
for cont in contours:
x,y,w,h = cv2.boundingRect(cont)
area = w*h
if area > mx_area:
mx = x,y,w,h
mx_area = area
x,y,w,h = mx
# Output to files
roi = img[y:y+h,x:x+w]
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
blur = cv2.GaussianBlur(gray, (5,5),0)
ret3, thresh = cv2.threshold(blur,0,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
cv2_imshow(thresh)
text = pytesseract.image_to_string(roi);
print(text); print("\n"); print(pytesseract.image_to_string(thresh));
print("\n")
return [x[0] for x in significant];
edgeImg_8u = np.asarray(thresh, np.uint8)
# Find contours
significant = findSignificantContours(img, edgeImg_8u)
mask = thresh.copy()
mask[mask > 0] = 0
cv2.fillPoly(mask, significant, 255)
# Invert mask
mask = np.logical_not(mask)
#Finally remove the background
img[mask] = 0;
Tesseract can't extract the text from this image. Is there a way I can rotate it to align the text perfectly and then feed it to pytesseract? Please let me know if my question require any more clarity.

Here's a simple approach:
Obtain binary image. Load image, convert to grayscale,
Gaussian blur, then Otsu's threshold.
Find contours and sort for largest contour. We find contours then filter using contour area with cv2.contourArea() to isolate the rectangular contour.
Perform perspective transform. Next we perform contour approximation with cv2.contourArea() to obtain the rectangular contour. Finally we utilize imutils.perspective.four_point_transform to actually obtain the bird's eye view of the image.
Binary image
Result
To actually extract the text, take a look at
Use pytesseract OCR to recognize text from an image
Cleaning image for OCR
Detect text area in an image using python and opencv
Code
from imutils.perspective import four_point_transform
import cv2
import numpy
# Load image, grayscale, Gaussian blur, Otsu's threshold
image = cv2.imread("1.jpg")
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
blur = cv2.GaussianBlur(gray, (7,7), 0)
thresh = cv2.threshold(blur, 0, 255, cv2.THRESH_BINARY + cv2.THRESH_OTSU)[1]
# Find contours and sort for largest contour
cnts = cv2.findContours(thresh, cv2.RETR_EXTERNAL,cv2.CHAIN_APPROX_SIMPLE)
cnts = cnts[0] if len(cnts) == 2 else cnts[1]
cnts = sorted(cnts, key=cv2.contourArea, reverse=True)
displayCnt = None
for c in cnts:
# Perform contour approximation
peri = cv2.arcLength(c, True)
approx = cv2.approxPolyDP(c, 0.02 * peri, True)
if len(approx) == 4:
displayCnt = approx
break
# Obtain birds' eye view of image
warped = four_point_transform(image, displayCnt.reshape(4, 2))
cv2.imshow("thresh", thresh)
cv2.imshow("warped", warped)
cv2.waitKey()

To Solve this problem you can also use minAreaRect api in opencv which will give you a minimum area rotated rectangle with an angle of rotation. You can then get the rotation matrix and apply warpAffine for the image to straighten it. I have also attached a colab notebook which you can play around on.
Colab notebook : https://colab.research.google.com/drive/1SKxrWJBOHhGjEgbR2ALKxl-dD1sXIf4h?usp=sharing
import cv2
from google.colab.patches import cv2_imshow
import numpy as np
def rotate_image(image, angle):
image_center = tuple(np.array(image.shape[1::-1]) / 2)
rot_mat = cv2.getRotationMatrix2D(image_center, angle, 1.0)
result = cv2.warpAffine(image, rot_mat, image.shape[1::-1], flags=cv2.INTER_LINEAR)
return result
img = cv2.imread("/content/sxJzw.jpg")
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
mask = np.zeros((img.shape[0], img.shape[1]))
blur = cv2.GaussianBlur(gray, (5,5),0)
ret, thresh = cv2.threshold(blur,0,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
cv2_imshow(thresh)
contours, _ = cv2.findContours(thresh, cv2.RETR_EXTERNAL,cv2.CHAIN_APPROX_SIMPLE)
largest_countour = max(contours, key = cv2.contourArea)
binary_mask = cv2.drawContours(mask, [largest_countour], 0, 1, -1)
new_img = img * np.dstack((binary_mask, binary_mask, binary_mask))
minRect = cv2.minAreaRect(largest_countour)
rotate_angle = minRect[-1] if minRect[-1] < 0 else -minRect[-1]
new_img = rotate_image(new_img, rotate_angle)
cv2_imshow(new_img)