Related
I recently installed pycharm. I also use a different libraries when I code. I was able to install Numpy, Pandas, etc. But when I tried to install tensor flow, I got an error saying,
ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
I have the latest pip(20.1.1) and latest pycharm version. I use python 3.8.1 which is not the latest. I don't know if it's the problem or not because it fits the requirements.
I had the same issue , it's because the latest version of Python matches with Tensorflow 2.x , and these versions are not supported by pip installation ( venv ) , you better install Anaconda and create a portable environnement that you can use on multiple projects , it'll be easier to install Tensorflow
conda install tensorflow
Or you can use the Anaconda Navigator for a gui interface packages installation
Try first using pip command. You will have more details of the fails.
pip install pandas
also check which python version are you using inside pycharm. I suggest you to configure a virtualenv.
Try this,
MacOS:
python -m pip install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-2.2.0-cp38-cp38-macosx_10_14_x86_64.whl
Windows:
python -m pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow_cpu-2.2.0-cp38-cp38-win_amd64.whl
Does anyone know how to properly install tensorflow on Windows?
I'm currently using Python 3.7 (also tried with 3.6) and every time I get the same "Could not find a version that satisfies the requirement tensorflow-gpu (from versions: )
No matching distribution found for tensorflow-gpu" error
I tried installing using pip and anaconda, both don't work for me.
Found a solution, seems like Tensorflow doesn't support versions of python after 3.6.4. This is the version I'm currently using and it works.
Tensorflow or Tensorflow-gpu is supported only for 3.5.X versions of Python. Try installing with any Python 3.5.X version. This should fix your problem.
Here is what i did to get tensorflow working with windows.
Download python 3.7.0 (64 bit from Python Releases for Windows) Install it and check python version by running below command in cmd:
python --version
Python 3.7.0
Then run below command to upgrade pip to latest
python -m pip install --upgrade pip
Now install tensorflow using pip
pip install tensorflow
That's it you have installed tensorflow on windows. Below image shows what happens when you type above commands
link for tensorflow for python 3x
https://pypi.org/project/tensorflow/#files
tensorflow-1.14.0-cp37-cp37m-win_amd64.whl (68.3 MB)
Unfortunately, tensorflow can't installed correctly on python 3.7 and last version of anaconda: so, the best and effective way to do this is to downgrade your python to python 3.6.7 use the next steps:
1- download the latest version of Anaconda
use Anaconda prompt with administrator privilege
2- conda install python=3.6.7 (need a long time)
3-conda install tensorflow
4- conda install keras
5- conda install numpy
Check whether you have a CPU or GPU, if your system doesn't have GPU, then it will generate error.
If you are going to install tensorflow using Windows command prompt (assuming python is already installed), then just run the following command. Go to the root directory, preferably 'C:' drive then run
For GPU- pip3 install --upgrade tensorflow-gpu
For CPU- pip3 install --upgrade tensorflow
If you are using Anaconda, then open Anaconda Navigator->Environments->Select 'All' from the drop down menu and then search TensorFlow. If you are using CPU, then select 'tensorflow', else for GPU select 'tensorflow-gpu'. Then click Apply.
Screenshot of Anaconda Navigator-In case you are not familiar where to look.
Download the latest version of anaconda from here
I'm using Anaconda 2019.03 for Windows Installer, Python 3.7, 64-bit
Upgrade pip as:
python -m pip install --upgrade pip
(a). Install tensorflow using pip3 as:
pip3 install --user --upgrade tensorflow
(b). If you installed anaconda with all users mode. The above
command will become:
pip3 install --upgrade tensorflow
Check installation success as:
python -c "import tensorflow as tf; print(tf.reduce_sum(tf.random.normal([1000, 1000])))"
As of Feb 2020, Tensorflow is not supported for Python 3.8+
To make it work install a virtualenv w/ Python 3.7 from here: https://www.python.org/downloads/windows/
Tensorflow pip installation for python version 3.5-3.8 requires pip 19.0 or later, as mentioned in the official tensorflow documentation.
Here is a part of this documentation:
System requirements
Python 3.5–3.8
Python 3.8 support requires TensorFlow 2.2 or later.
pip 19.0 or later (requires manylinux2010 support)
Try running pip install --upgrade pip inside your python3 virtualenv.
You mentioned Anaconda. Do you run your python through there?
If so check in Anaconda Navigator --> Environments, if your current environment have got tensorflow installed.
If not, install tensorflow and run from that environment.
Should work.
I had the same problem that yours, happened that I had python at version 3.7. So for installing the Tensorflow with the GPU support I used:
py -3.6 -m pip install tensorflow-gpu
at a Virtualenv ambient. You can see the documentation behind on this website:
https://docs.python.org/3/installing/index.html
I think that this solution is better than downgrade the Python version.
Actually the easiest way to install tensorflow is:
install python 3.5 (not 3.6 or 3.7) you can check wich version you have by typing "python" in the cmd.
When you install it check in the options that you install pip with it and you add it to variables environnement.
When its done just go into the cmd and tipe "pip install tensorflow"
It will download tensorflow automatically.
If you want to check that it's been installed type "python" in the cmd then some that ">>>" will appear, then you write "import tensorflow" and if there's no error, you've done it!
As of November 2018, Tensorflow is not supported for Python 3.6.4+
What to do:
Downgrade Anaconda's Python from 3.7 or 3.6.5+ to 3.6.4
a. Open Command Prompt, find your Anaconda environment, and change your directory
where anaconda or where python
Example path and cd:
cd C:\ProgramData\Anaconda3\bin
b. While in anaconda3/bin in your Command Prompt, source activate your base Anaconda environment
source activate
c. In your Command Prompt, downgrade your base Anaconda environment
conda install python=3.6.4
d. Install Tensorflow
pip install tensorflow
Further reading:
http://docs.anaconda.com/anaconda/user-guide/faq/#how-do-i-get-the-latest-anaconda-with-python-3-5
As of July 2019, I have installed it on python 3.7.3 using py -3 -m pip install tensorflow-gpu
py -3 in my installation selects the version 3.7.3.
The installation can also fail if the python installation is not 64 bit. Install a 64 bit version first.
This is Manas working as a intern in COE-AI lab(CET,BBSR) under tech machindra.
We faced same error. After a little research, we found that there is a glitch in anaconda python 3.7. It does not install tensorflow through pip or conda install command, even if it does..produces same error..
Here is the solution, install conda environment for python=3.6:
go to the directory where conda is installed
cd anaconda3
conda create -n tensorflow python=3.6
conda activate tensorflow
conda install tensorflow python=3.6
python
Import tensorflow.
steps
Do it twice:
enter image description here
enter image description here
-> Not able to install tensorflow , Here I have a solution that worked for me
Step 1 :
- Check version of python(3.7.3)
- Python must be 64 bit Otherwise tensorflow never ever going to be installed it defiitely gives Error.
Step 2 :
pip install tensorflow==2.0.0
Step 3 :
pip install sklearn==0.0
pip install Pillow==8.0.1
pip install h5py==2.10.0
Step 4 :
pip install keras==2.3.1
Now its ready to use.
In Windows 10 with Python 3.8.5, first i tried directly then it was giving following error:
ERROR: Could not find a version that satisfies the requirement tensorflow==1.15 (from versions: none)
Then i installed successfully in virtual environment shown below:
PS E:\udemy\full_stack_web_ai\deeplearning> .\myenv\Scripts\activate
(myenv) PS E:\udemy\full_stack_web_ai\deeplearning> pip install tensorflow
Collecting tensorflow ###
Downloading tensorflow-2.4.1-cp38-cp38-win_amd64.whl (370.7 MB)
Use virtual environment using:
python -m venv myenv
.\myenv\Scripts\activate
Not Enabling the Long Paths can be the potential problem.To solve that,
Steps include:
Go to Registry Editor on the Windows Laptop
Find the key "HKEY_LOCAL_MACHINE"->"SYSTEM"->"CurrentControlSet"->
"File System"->"LongPathsEnabled" then double click on that option and change the value from 0 to 1.
3.Now try to install the tensorflow it will work.
I am trying to install tensorflow 1.0.0 on windows 10 , but, it's showing this error message:
Could not find a version that satisfies the requirement tensorflow==1.0 (from versions ...
No matching distribution found for tensorflow==1.0
I have already tried to install using anaconda v 5.2, Python v 3.6
Try by creating python 3.5 env in anaconda it should work.
conda create --name tf1.0 pip python=3.5
activate tf1.0
pip install tensorflow==1.0
I faced the same problem. Then after much hardships, I got to know that anaconda versions>=4.2.0 don't support the direct installation of tensorflow version 1.0.0, So, I installed anaconda version=4.2.0 and works perfectly now.
it takes direct installation:
pip install tensorflow==1.0.0
I want to install Tensorflow 1.o for python on windows.
This is information for my system.
D:\>python --version
Python 3.5.2 :: Anaconda 4.2.0 (32-bit)
D:\>pip3 --version
pip 9.0.1 from d:\web\anaconda\lib\site-packages (python 3.5)'
But, when I execute below command,
D:\>pip3 install tensorflow
Collecting tensorflow
Could not find a version that satisfies the requirement tensorflow (from versions: )
No matching distribution found for tensorflow
I don't understand what the problem is...
And I tried another way...
This is case when I use Conda
(tensorflow) D:\>pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl
tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl is not a supported wheel on this platform.
What is the problem?
I was in same problem.
Below command solved my problem
pip3 install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-1.0.0-py3-none-any.whl
to find the list of all the urls based on the python version and CPU or GPU only refer to:
https://www.tensorflow.org/install/pip
Tensorflow requires a 64-bit version of Python.
Additionally, it only supports Python 3.5.x through Python 3.8.x.
If you're using a 32-bit version of Python or a version that's too old or new, then you'll get that error message.
To fix it, you can install the 64-bit version of Python 3.8.6 via Python's website.
Tensorflow on windows needs python 3.5. You can follow following steps to activate python 3.5 in anaconda:
See which version of python you have: conda search python
If you already have python 3.5 then go to step 3
otherwise use conda create -n py35 python=3.5 anaconda to create python 3.5
Activate python 3.5 using activate py35
Now install tensorflow using conda install tensorflow
If step4 is not working i.e, something like "tensorflow: no package found " then follow this tutorial to forge conda-forge channel and then try installing tensorflow using step4. It worked for me.
Try this
Installing with Anaconda
conda create --name tensorflow python=3.5
activate tensorflow
conda install jupyter
conda install scipy
pip install tensorflow
or
pip install tensorflow-gpu
It is important to add python=3.5 at the end of the first line, because it will install Python 3.5.
I was getting the same error
Get Python 3.5
Upgrade pip version to 9
Install tensorflow
It worked for me
I did it with:
python3 -m pip install --upgrade tensorflow
From your python version output, looks like that you are using Anaconda python, in that case, there is a simple way to install tensorflow.
conda install -c conda-forge tensorflow
This command will take care of all dependencies like upgrade/downgrade etc.
upgrading pip worked for me
python -m pip install --upgrade pip
i had python 3.8.5 ..but it will not work with tenserflow..
so i installed python 3.7.9 and it worked.
The solution for me was sooo dumb!!
I was using Python 3.8 in my environment. I made a new environment using Python 3.7, and the install worked fine.
source
The TensorFlow package couldn't be found by the latest version of the "pip".
To be honest, I really don't know why this is...
but, the quick fix that worked out for me was:
[In case you are using a virtual environment]
downgrade the virtual environment to python-3.8.x and pip-20.2.x
In case of anaconda, try:
conda install python=3.8
This should install the latest version of python-3.8 and pip-20.2.x for you.
And then, try
pip install tensorflow
Again, this worked fine for me, not sure if it'll work the same for you.
The Reason is that TensorFlow is only available upto python versions <= 3.6. You can't download tensorflow for python versions > 3.6 as there is no tensorflow.
If you don't want to downgrade your entire python version for a single package, do this:
create a new virtual environment for that project (using anaconda)
conda create -n <env_name> python=3.6.8
activate the created environment using conda activate <env_name>
Now install pip install tensorflow
note: If tensorflow dosen't install : try install keras module first and then try installing tensorflow
I'm trying to install TensorFlow on Windows.
I tried to install it with pip, but I always get the same error message:
... is not a supported wheel on this platform.
I first tried it with Python 3.5.1, now I upgraded to 3.6.0b4, but it makes no difference.
Python:
Python 3.6.0b4 (default, Nov 22 2016, 05:30:12) [MSC v.1900 64 bit (AMD64)] on win32
pip:
pip 9.0.1 from ...\python\lib\site-packages (python 3.6)
To be exact, I tried the following two commands:
pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl
pip install --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-0.12.0rc0-cp35-cp35m-win_amd64.whl
they output the following:
> tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform.
> tensorflow_gpu-0.12.0rc0-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform.
Does anyone know how to solve this problem? I'm not sure where I'm making a mistake.
Thanks!
Edit 1
Btw, I also tried pip install tensorflow and pip install tensorflow-gpu like suggested here. I got the following output:
> Could not find a version that satisfies the requirement tensorflow (from versions: ) No matching distribution found for tensorflow
> Could not find a version that satisfies the requirement tensorflow-gpu (from versions: ) No matching distribution found for tensorflow-gpu
Update 15.11.2017
It seems that by now it is working like one would expect. Running the following commands using the following pip and python version should work.
Installing with Python 3.6.x
Version
Python: 3.6.3
pip: 9.0.1
Installation Commands
The following commands are based of the following installation guide here.
using cmd
C:> pip3 install --upgrade tensorflow // cpu
C:> pip3 install --upgrade tensorflow-gpu // gpu
using Anaconda
C:> conda create -n tensorflow python=3.5
C:> activate tensorflow
(tensorflow)C:> pip install --ignore-installed --upgrade tensorflow
(tensorflow)C:> pip install --ignore-installed --upgrade tensorflow-gpu
Additional Information
A list of common installation problems can be found here.
You can find an example console output of a successful tensorflow cpu installation here.
Old response:
Okay to conclude; use version 3.5.2 !
Neither 3.5.1 nor 3.6.x seem to work at the moment.
Versions:
Python 3.5.2 pip 8.1.1 .. (python 3.5)
Commands:
// cpu
C:> pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl
// gpu
C:> pip install --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-0.12.0rc0-cp35-cp35m-win_amd64.whl
If you are using anaconda distribution, you can do the following to use python 3.5 on the new environnement "tensorflow":
conda create --name tensorflow python=3.5
activate tensorflow
conda install jupyter
conda install scipy
pip install tensorflow
# or
# pip install tensorflow-gpu
It is important to add python=3.5 at the end of the first line, because it will install Python 3.5.
Source: https://github.com/tensorflow/tensorflow/issues/6999#issuecomment-278459224
After searching a lot and trying to install and reinstall Python, i found the solution was very simple
use the following for windows
python -m pip install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-0.12.0-py3-none-any.whl
change to following on mac
python3 -m pip install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-0.12.0-py3-none-any.whl
for Anaconda use corresponding conda
Tensorflow now works with python 3.6.4, don't use python builds that came after 3.6.4 and most importantly tensorflow doesn't work on Python 3.7.2. You can download 3.6.4 for windows from here python 3.6.4.
Then just simply run pip install tensorflow-gpu
At the time of this writing, there is no official support for TensorFlow with Python 3.6 on Windows. The recommendation is to build TensorFlow yourself.
Some people have already done this and provide *.whl files that you can directly install with pip. These are unofficial, so use at your own risk:
http://www.lfd.uci.edu/%7Egohlke/pythonlibs/#tensorflow
You can simply download them and install them with pip install <filename>.whl.
See also this GitHub comment.
I was having Python 3.6 and was facing the issue as "No module named tensorflow" on "pip install tensorflow". Turned out as my machine was of 64 bit while the Python 3.6 version installed was for 32 bit. Uninstalled it, reinstalled the Python 3.6 x64 version, pip installed tensorflow, problem solved.
Tensorflow is now supported on Python 3.6. Just make sure that the Python installation is 64 bit on a 64 bit machine and that pip is the latest (pip install --upgrade pip).
After that (pip install --upgrade tensorflow) works like a charm.
Tensorflow indeed supports Python 3.6.X version, but only for 64-bit architecture. Here is the link where you can download Python 3.6.X 64-bit version
For Pip installation on Windows and 64-bit Python 3.5:
CPU only version:
C:\> pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl
For the GPU version:
C:\> pip install --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-0.12.0rc0-cp35-cp35m-win_amd64.whl
References:
Tensorflow installation issue on windows "tensorflow_gpu-0.12.0rc0-cp35-cp35m-win_amd64.whl is not a supported wheel on th is platform.".
https://www.tensorflow.org/versions/r0.12/get_started/os_setup.html
Also see tensorflow not found in pip.
Tensorflow in Now supporting Python 3.6.0 .....I have successfully installed the Tensorflow for Python 3.6.0
Using this Simple Instruction // pip install -- tensorflow
[enter image description here][1]
[1]: https://i.stack.imgur.com/1Y3kf.png
Installing collected packages: protobuf, html5lib, bleach, markdown, tensorflow-tensorboard, tensorflow
Successfully installed bleach-1.5.0 html5lib-0.9999999 markdown-2.6.9 protobuf-3.4.0 tensorflow-1.3.0 tensorflow-tensorboard-0.1.5
Same issue with you .
py3.6x
win10 pro x64
pip 9.0.1
Issue message
"Could not find a version that satisfies the requirement tensorflow (from versions: )
No matching distribution found for tensorflow"
Maybe you can try py3.5
Windows batch file for installing TensorFlow and Python 3.5 on Windows. The issue is that as of this date, TensorFlow is not updated to support Python 3.6+ and will not install. Additionally, many systems have an incompatible version of Python. This batch file should create a compatible environment without effecting other Python installs. See REM comments for assumptions.
REM download Anaconda3-4.2.0-Windows-x86_64.exe (contains python 3.5) from https://repo.continuum.io/archive/index.html
REM Assumes download is in %USERPROFILE%\Downloads
%USERPROFILE%\Downloads\Anaconda3-4.2.0-Windows-x86_64.exe
REM change path to use Anaconda3 (python 3.5).
PATH %USERPROFILE%\Anaconda3;%USERPROFILE%\Anaconda3\Scripts;%USERPROFILE%\Anaconda3\Library\bin;%PATH%
REM update pip to 9.0 or later (mandatory)
python -m pip install --upgrade pip
REM tell conda where to load tensorflow
conda config --add channels conda-forge
REM elevate command (mandatory) and install tensorflow - use explicit path to conda %USERPROFILE%\Anaconda3\scripts\conda
powershell.exe -Command start-process -verb runas cmd {/K "%USERPROFILE%\Anaconda3\scripts\conda install tensorflow"}
Be sure the above PATH is used when invoking TensorFlow.
Follow these steps to install ternsorflow:
(step 1) conda create -n py35 python=3.5
(step 2) activate py35
(step 3) conda create -n tensorflow
(step 4,only for GPU) pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-1.1.0-cp35-cp35m-win_amd64.whl
Just found Tensorflow 1.1 for python 3.6 on windows x64 (including GPU version, but i tested only cpu): http://www.lfd.uci.edu/~gohlke/pythonlibs/#tensorflow. Unofficial apparently, but worked for me when I import tensorflow or tflearn in my code. They have scipy for windows there and bunch of other packages.
For some reason pip install URL returns code 404, so the installation would be the following:
1) Download protobuf whl package from here: http://www.lfd.uci.edu/~gohlke/pythonlibs/vu0h7y4r/protobuf-3.3.0-py3-none-any.whl
2) pip install {DownloadFolder}\protobuf-3.3.0-py3-none-any.whl
3) Download TF whl file: http://www.lfd.uci.edu/~gohlke/pythonlibs/vu0h7y4r/tensorflow-1.1.0-cp36-cp36m-win_amd64.whl
4) pip install {DownloadFolder}\tensorflow-1.1.0-cp36-cp36m-win_amd64.whl
It worked for me.
For someone w/ TF 1.3:
Current TensorFlow 1.3 support Python 3.6, and then you need cuDNN 6 (cudnn64_6.dll)
Based on Tensorflow on windows - ImportError: DLL load failed: The specified module could not be found
and this: https://github.com/tensorflow/tensorflow/issues/7705
On 2/22/18, when I tried the official recommendation:
pip3 install --upgrade tensorflow
I got this error
Could not find a version that satisfies the requirement tensorflow
But instead using
pip install --upgrade tensorflow
installed it ok. (I ran it from the ps command prompt.)
I have 64-bit windows 10, 64-bit python 3.6.3, and pip3 version 9.0.1.
Tensor flow on 32 bit machine.
There is no official build out for 32 bit, but still there is a workaround for that, follow the link http://cudamusing.blogspot.in/2015/11/building-tensorflow-for-jetson-tk1.html. I would not suggest doing this big reason is its not possible to follow the process every time there is a change in official tensor flow code.
I had the same issue, but I followed the following steps:-
I had Python 3.6.5 (32 bit) installed on my desktop, but from all the research I did, I could conclude that Tensorflow runs only on Python 3.5x or 3.6x 64 bit versions. So I uninstalled it and Installed Python 3.5.0 instead.
I ran Python 3.5.0 as an administrator. This step is necessary for Windows as, without it, the system doesn't get any privileges and can't install tensorflow.
Install Pip3 using command:- python -m pip install --upgrade pip
Once the newest version (10.0.1 in my case) is installed, you can install tensorflow usin command:- pip3 install --upgrade tensorflow
Your tensorflow will be downloaded and installed. For further help on how to run tensorflow programs, go to https://www.tensorflow.org/get_started/premade_estimators
https://i.stack.imgur.com/1Y3kf.png
pip install -- tensorflow
This worked for me for this version of python
Python 3.6.4 : : Anaconda, Inc.
Tensorflow is not compatible with python3.7 and spyder3.3.1
To work with stable tensorflow version
follow the procedure
windows-->search-->Anaconda prompt-->right click -->click Run as adminstrator
Below command create the virtual environment which does not disturb existing projects
conda create -n projectname
Below command activates your virtual environment within this directory installed package will not disturb your existing project.
activate projectname
Below command installs python 3.6.7 and spyder 3.2.3 as well
conda install spyder=3.2.3
Below mentioned tensorflow version works without any error. As per your need, you can install tensorflow version specifically.
pip install tensorflow==1.3.0
To open spyder
spyder
To exit form Virtual environment
deactivate
For the GPU version, see my answer here.
In short, install Anaconda, then open an anaconda terminal and type conda create --name tf_gpu tensorflow-gpu
You are then free to use the conda environment tf_gpu
Tensor flow has only support for python 2.7 3.4 3.5
Other python versions are not supported
So you please install the supported python version and try it again.
The official link is https://www.tensorflow.org/install/install_linux#InstallingAnaconda
It provides how to install it with anaconda .
This will help you