Related
I'm new to python hence I am unable to implement the solutions I've found online in order to fix my problem.
I am trying to add a specific string to the end of a specific line to a textfile. As I understand text commands, I must overwrite the file if I don't want to append to the end of it. So, my solution is as follows:
ans = 'test'
numdef = ['H',2]
f = open(textfile, 'r')
lines = f.readlines()
f.close()
f = open(textfile, 'w')
f.write('')
f.close()
f = open(textfile, 'a')
for line in lines:
if int(line[0]) == numdef[1]:
if str(line[2]) == numdef[0]:
k = ans+ line
f.write(k)
else:
f.write(line)
Basically, I am trying to add variable ans to the end of a specific line, the line which appears in my list numdef. So, for example, for
2 H: 4,0 : Where to search for information : google
I want
2 H: 4,0 : Where to search for information : google test
I have also tried using line.insert() but to no avail.
I understand using the 'a' function of the open command is not so relevant and helpful here, but I am out of ideas. Would love tips with this code, or if maybe I should scrap it and rethink the whole thing.
Thank you for your time and advice!
When you use the method
lines = f.readlines()
Python automatically adds "\n" to the end of each line.
Try instead of :
k = line+ans
The following:
k = line.rstrip('\n') + ans
Good luck!
Try this. You don't have an else case if it meets the first requirement but not the other.
ans = 'test'
numdef = ['H',2]
f = open(textfile, 'r')
lines = f.readlines()
f.close()
f = open(textfile, 'w')
f.write('')
f.close()
f = open(textfile, 'a')
for line in lines:
if int(line[0]) == numdef[1] and str(line[2]) == numdef[0]:
k = line.replace('\n','')+ans
f.write(k)
else:
f.write(line)
f.close()
Better way:
#initialize variables
ans = 'test'
numdef = ['H',2]
#open file in read mode, add lines into lines
with open(textfile, 'r') as f:
lines=f.readlines()
#open file in write mode, override everything
with open(textfile, 'w') as f:
#in the list comprehension, loop through each line in lines, if both of the conditions are true, then take the line, remove all newlines, and add ans. Otherwise, remove all the newlines and don't add anything. Then combine the list into a string with newlines as separators ('\n'.join), and write this string to the file.
f.write('\n'.join([line.replace('\n','')+ans if int(line[0]) == numdef[1] and str(line[2]) == numdef[0] else line.replace('\n','') for line in lines]))
In Python, calling e.g. temp = open(filename,'r').readlines() results in a list in which each element is a line from the file. However, these strings have a newline character at the end, which I don't want.
How can I get the data without the newlines?
You can read the whole file and split lines using str.splitlines:
temp = file.read().splitlines()
Or you can strip the newline by hand:
temp = [line[:-1] for line in file]
Note: this last solution only works if the file ends with a newline, otherwise the last line will lose a character.
This assumption is true in most cases (especially for files created by text editors, which often do add an ending newline anyway).
If you want to avoid this you can add a newline at the end of file:
with open(the_file, 'r+') as f:
f.seek(-1, 2) # go at the end of the file
if f.read(1) != '\n':
# add missing newline if not already present
f.write('\n')
f.flush()
f.seek(0)
lines = [line[:-1] for line in f]
Or a simpler alternative is to strip the newline instead:
[line.rstrip('\n') for line in file]
Or even, although pretty unreadable:
[line[:-(line[-1] == '\n') or len(line)+1] for line in file]
Which exploits the fact that the return value of or isn't a boolean, but the object that was evaluated true or false.
The readlines method is actually equivalent to:
def readlines(self):
lines = []
for line in iter(self.readline, ''):
lines.append(line)
return lines
# or equivalently
def readlines(self):
lines = []
while True:
line = self.readline()
if not line:
break
lines.append(line)
return lines
Since readline() keeps the newline also readlines() keeps it.
Note: for symmetry to readlines() the writelines() method does not add ending newlines, so f2.writelines(f.readlines()) produces an exact copy of f in f2.
temp = open(filename,'r').read().split('\n')
Reading file one row at the time. Removing unwanted chars from end of the string with str.rstrip(chars).
with open(filename, 'r') as fileobj:
for row in fileobj:
print(row.rstrip('\n'))
See also str.strip([chars]) and str.lstrip([chars]).
I think this is the best option.
temp = [line.strip() for line in file.readlines()]
temp = open(filename,'r').read().splitlines()
My preferred one-liner -- if you don't count from pathlib import Path :)
lines = Path(filename).read_text().splitlines()
This it auto-closes the file, no need for with open()...
Added in Python 3.5.
https://docs.python.org/3/library/pathlib.html#pathlib.Path.read_text
Try this:
u=open("url.txt","r")
url=u.read().replace('\n','')
print(url)
To get rid of trailing end-of-line (/n) characters and of empty list values (''), try:
f = open(path_sample, "r")
lines = [line.rstrip('\n') for line in f.readlines() if line.strip() != '']
You can read the file as a list easily using a list comprehension
with open("foo.txt", 'r') as f:
lst = [row.rstrip('\n') for row in f]
my_file = open("first_file.txt", "r")
for line in my_file.readlines():
if line[-1:] == "\n":
print(line[:-1])
else:
print(line)
my_file.close()
This script here will take lines from file and save every line without newline with ,0 at the end in file2.
file = open("temp.txt", "+r")
file2 = open("res.txt", "+w")
for line in file:
file2.writelines(f"{line.splitlines()[0]},0\n")
file2.close()
if you looked at line, this value is data\n, so we put splitlines()
to make it as an array and [0] to choose the only word data
import csv
with open(filename) as f:
csvreader = csv.reader(f)
for line in csvreader:
print(line[0])
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
I want to open a file, search for a specific word, change the word and save the file again. Sounds really easy - but I just can't get it working... I know that I have to overwrite the whole file but only change this one word!
My Code:
f = open('./myfile', 'r')
linelist = f.readlines()
f.close
for line in linelist:
i =0;
if 'word' in line:
for number in arange(0,1,0.1)):
myNumber = 2 - number
myNumberasString = str(myNumber)
myChangedLine = line.replace('word', myNumberasString)
f2 = open('./myfile', 'w')
f2.write(line)
f2.close
#here I have to do some stuff with these files so there is a reason
#why everything is in this for loop. And I know that it will
#overwrite the file every loop and that is good so. I want that :)
If I make it like this, the 'new' myfile file contains only the changed line. But I want the whole file with the changed line... Can anyone help me?
****EDIT*****
I fixed it! I just turned the loops around and now it works perfectly like this:
f=open('myfile','r')
text = f.readlines()
f.close()
i =0;
for number in arange(0,1,0.1):
fw=open('mynewfile', 'w')
myNumber = 2 - number
myNumberasString = str(myNumber)
for line in text:
if 'word' in line:
line = line.replace('word', myNumberasString)
fw.write(line)
fw.close()
#do my stuff here where I need all these input files
You just need to write out all the other lines as you go. As I said in my comment, I don't know what you are really trying to do with your replace, but here's a slightly simplified version in which we're just replacing all occurrences of 'word' with 'new':
f = open('./myfile', 'r')
linelist = f.readlines()
f.close
# Re-open file here
f2 = open('./myfile', 'w')
for line in linelist:
line = line.replace('word', 'new')
f2.write(line)
f2.close()
Or using contexts:
with open('./myfile', 'r') as f:
lines = f.readlines()
with open('./myfile', 'w') as f:
for line in lines:
line = line.replace('word', 'new')
f.write(line)
Use fileinput passing in whatever you want to replace:
import fileinput
for line in fileinput.input("in.txt",inplace=True):
print(line.replace("whatever","foo"),end="")
You don't seem to be doing anything special in your loop that cannot be calculated first outside the loop, so create the string you want to replace the word with and pass it to replace.
inplace=True will mean the original file is changed. If you want to verify everything looks ok then remove the inplace=True for the first run and you will actually see the replaced output instead of the lines being written to the file.
If you want to write to a temporary file, you can use a NamedTemporaryFile with shutil.move:
from tempfile import NamedTemporaryFile
from shutil import move
with open("in.txt") as f, NamedTemporaryFile(dir=".",delete=False) as out:
for line in f:
out.write(line.replace("whatever","foo"))
move("in.txt",out.name)
One problem you may encounter is matching substrings with replace so if you know the word is always followed in the middle of a sentence surrounded by whitespace you could add that but if not you will need to split and check every word.
from tempfile import NamedTemporaryFile
from shutil import move
from string import punctuation
with open("in.txt") as f, NamedTemporaryFile(dir=".",delete=False) as out:
for line in f:
out.write(" ".join(word if word.strip(punctuation) != "whatever" else "foo"
for word in line.split()))
The are three issues with your current code. First, create the f2 file handle before starting the loop, otherwise you'll overwrite the file in each iteration. Third, you are writing an unmodified line in f2.write(line). I guess you meant f2.write(myChangedLine)? Third, you should add an else statement that writes unmodified lines to the file. So:
f = open('./myfile', 'r')
linelist = f.readlines()
f.close
f2 = open('./myfile', 'w')
for line in linelist:
i =0;
if 'word' in line:
for number in arange(0,1,0.1)):
myNumber = 2 - number
myNumberasString = str(myNumber)
myChangedLine = line.replace('word', myNumberasString)
f2.write(myChangedLine)
else:
f2.write(line)
f2.close()