I'm havin a rough time trying to fgure this error out. Y try ro run a simple script like the these:
from instapy_cli import client
username = "username"
password = "password"
image = "Image.jpg"
description = "This is a test"
with client(username, password) as cli:
cli.upload(image, description)
and i get the following error:
[IG] not found cookie/cookie_file >> login as default
Error parsing error response: Expecting value: line 1 column 1 (char 0)
Error is >>
Bad Request
Something went bad.
Please retry or send an issue on https://github.com/b3nab/instapy-cli
Traceback (most recent call last):
File "c:/Users/Lucas/Desktop/Python/Proyectos/Insta Automation/Matetemático/Posting Script.py", line 15, in <module>
cli.upload(imagen, text)
File "C:\Users\Lucas\AppData\Roaming\Python\Python37\site-packages\instapy_cli\cli.py", line 153, in upload
raise IOError("Unable to upload.")
OSError: Unable to upload.
I was facing the same issue, and I solved it by uninstalling and then re-installing:
pip uninstall instapy-cli
pip install instapy-cli
install these packages should be greater than a specific version
[instabot 0.117.0 requires moviepy>=1.0.1, but you have moviepy 0.2.3.2 which is incompatible.
instabot 0.117.0 requires tqdm>=4.41.1, but you have tqdm 4.11.2 which is incompatible]
try this
Related
I have a small Python3-script like this:
import speedtest
# Speedtest
test = speedtest.Speedtest() # <--- line 4
test.get_servers()
best = test.get_best_server()
print(f"Found: {best['host']} located in {best['country']}")
The first time I run it, it works and everything is fine; it outputs:
Found: speedtest.witcom.cloud:8080 located in Germany
Happy days.
The second time (and subsequel times) that I run the script, I get this error:
Traceback (most recent call last):
File "/Users/zeth/Code/pinger/pinger.py", line 4, in <module>
test = speedtest.Speedtest()
File "/usr/local/lib/python3.9/site-packages/speedtest.py", line 1095, in __init__
self.get_config()
File "/usr/local/lib/python3.9/site-packages/speedtest.py", line 1127, in get_config
raise ConfigRetrievalError(e)
speedtest.ConfigRetrievalError: HTTP Error 403: Forbidden
When Googling around, I saw that I could also call this module straight from the command line, but just running this:
$ speedtest-cli
That gives me the same kind of error:
Retrieving speedtest.net configuration...
Cannot retrieve speedtest configuration
ERROR: HTTP Error 403: Forbidden
But if I run the direct cli-command: speedtest-cli --secure ( docs for the --secure-flag ), then it goes through and outputs this:
Retrieving speedtest.net configuration...
Testing from Deutsche Telekom AG (212.185.228.168)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by hotspot.koeln (Cologne) [3.44 km]: 28.805 ms
Testing download speed................................................................................
Download: 30.01 Mbit/s
Testing upload speed......................................................................................................
Upload: 8.68 Mbit/s
The question
I can't figure out how to change this Python-line: test = speedtest.Speedtest() to use a --secure-flag (nor via HTTPS).
The documentation for speedtest-cli is scarce.
Other attempts
I found this solution here: Python Speedtest facing problems with certification _ssl.c:1056, that suggests manually approving the certificates.
But in this directory: /Volumes/Macintosh HD/Applications/ I don't have anything called Python3.9. I have python3.9 installed via Brew. And I'm on a Mac.
I could do this:
test = speedtest.Speedtest(secure=True)
I looked into the source code myself, in this directory:
vim /usr/local/lib/python3.9/site-packages/speedtest.py
Where I would see the function was defined like this:
class Speedtest(object):
"""Class for performing standard speedtest.net testing operations"""
def __init__(self, config=None, source_address=None, timeout=10,
secure=False, shutdown_event=None):
self.config = {}
self._source_address = source_address
self._timeout = timeout
self._opener = build_opener(source_address, timeout)
self._secure = secure
...
...
...
So I am trying to make a download tool to download stuff via a link here is a snippet from my code
if download_choice == "14":
print("Downloading test file to Desktop...")
myfile14 = requests.get(url14)
open('c:/users/%userprofile%/desktop/', 'wb').write(myfile14.content)
I want to make a program that can download stuff via a link. I want it to run on all PCs not only on mine. Here is the error:
Traceback (most recent call last): File "C:\Users\David\Desktop\Windows Download Tool\Python\WDT.py", line 100, in <module> open('c:/users/%userprofile%/desktop/', 'wb').write(myfile14.content) FileNotFoundError: [Errno 2] No such file or directory: 'c:/users/%userprofile%/desktop/'
Python does not use %userprofile% to get the username of the executing user.
To achieve this, you need to import the package os and run it's getlogin function. This returns a string with the current username
Example:
import os
username = os.getlogin()
if download_choice == "14":
print("Downloading test file to Desktop...")
myfile14 = requests.get(url14)
open(f'C:/Users/{username}/desktop/', 'wb').write(myfile14.content)
I am using an f-string for opening the file, since it is preferred by PEP-8 (it's just correct code-styling)
Attention: This only works on a windows machine
I am getting this error in pip search while studying python.
The picture is an error when I pip search. Can you tell me how to fix it?
$ pip search pdbx
ERROR: Exception:
Traceback (most recent call last):
File "*/lib/python3.7/site-packages/pip/_internal/cli/base_command.py", line 224, in _main
status = self.run(options, args)
File "*/lib/python3.7/site-packages/pip/_internal/commands/search.py", line 62, in run
pypi_hits = self.search(query, options)
File "*/lib/python3.7/site-packages/pip/_internal/commands/search.py", line 82, in search
hits = pypi.search({'name': query, 'summary': query}, 'or')
File "/usr/lib/python3.7/xmlrpc/client.py", line 1112, in __call__
return self.__send(self.__name, args)
File "/usr/lib/python3.7/xmlrpc/client.py", line 1452, in __request
verbose=self.__verbose
File "*/lib/python3.7/site-packages/pip/_internal/network/xmlrpc.py", line 46, in request
return self.parse_response(response.raw)
File "/usr/lib/python3.7/xmlrpc/client.py", line 1342, in parse_response
return u.close()
File "/usr/lib/python3.7/xmlrpc/client.py", line 656, in close
raise Fault(**self._stack[0])
xmlrpc.client.Fault: <Fault -32500: 'RuntimeError: This API has been temporarily disabled due to unmanageable load and will be deprecated in the near future. Please use the Simple or JSON API instead.'>
The pip search command queries PyPI's servers, and PyPI's maintainers have explained that the API endpoint that the pip search command queries is very resource intensive and too expensive for them to always keep open to the public. Consequently they sometimes throttle access and are actually planning to remove it completely soon.
See this GitHub issues thread ...
The solution I am using for now is to pip install pip-search (a utility created by GitHub user #victorgarric).
So, instead of 'pip search', I use pip_search. Definitely beats searching PyPI via a web browser
Follow the suggestion from JRK at the discussion at github (last comment) the search command is temporarily disabled, use your browser to search for packages meanwhile:
Check the thread on github and give him a thumb up ;)
search on website, https://pypi.org/,
then install the package you wanted
The error says
Please use the Simple or JSON API instead
You can try pypi-simple to query the pip repository
https://pypi.org/project/pypi-simple/
It gives an example too, I tried to use it here:
pypi-simple version 0.8.0 DistributionPackage' object has no attribute 'get_digest':
!/usr/bin/env python3
-*- coding: utf-8 -*-
"""
Created on Thu Nov 11 17:40:03 2020
#author: Pietro
"""
from pypi_simple import PyPISimple
def simple():
package=input('\npackage to be checked ')
try:
with PyPISimple() as client:
requests_page = client.get_project_page(package)
except:
print("\n SOMETHING WENT WRONG !!!!! \n\n",
"CHECK INTERNET CONNECTION OR DON'T KNOW WHAT HAPPENED !!!\n")
pkg = requests_page.packages[0]
print(pkg)
print(type(pkg))
print('\n',pkg,'\n')
print('\n'+pkg.filename+'\n')
print('\n'+pkg.url+'\n')
print('\n'+pkg.project+'\n')
print('\n'+pkg.version+'\n')
print('\n'+pkg.package_type+'\n')
#print('\n'+pkg.get_digest()+'\n','ENDs HERE !!!!') #wasnt working
if __name__ == '__main__':
simple()
got -4 so far for this answer don't know why , figureout I can try to check for a package with:
# package_name = input('insert package name : ')
package_name = 'numpy'
import requests
url = ('https://pypi.org/pypi/'+package_name+'/json')
r = requests.get(url)
try:
data = r.json()
for i in data:
if i == 'info':
print('ok')
for j in data[i]:
if j == 'name':
print((data[i])[j])
print([k for k in (data['releases'])])
except:
print('something went south !!!!!!!!!!')
I am trying to use http://sphinxdoc.github.io/pygooglevoice/examples.html#send-sms-messages and I am getting the error
File "build/bdist.macosx-10.6-intel/egg/googlevoice/voice.py", line 72, in login
AttributeError: 'NoneType' object has no attribute 'group'
My code is:
from googlevoice import Voice
from googlevoice.util import input
import sys
username, password = "email#gmail.com", "password"
voice = Voice()
voice.login(username, password)
phoneNumber = input('Number to send message to: ')
text = input('Message text: ')
voice.send_sms(phoneNumber, text)
I was wondering if that is a login error or error in the code? If so, how can I edit the code so that it works?
Thank you so much!
EDIT: I have been researching this and apparently it's a common problem and I have to change line 72 in the file voice.py but I can't find the file:
/usr/local/lib/python2.7/dist-packages/googlevoice/voice.py
To install, I did:
$ pip install python python-setuptools
$ sudo easy_install simplejson
$ sudo easy_install -U pygooglevoice
And now I can't find the voice.py file. I have been looking for a while on my mac but found nothing.
Other questions with the same problem:
https://code.google.com/archive/p/pygooglevoice/issues/76
googlevoice will not programatically login (Python)
python: pygooglevoice unable to login
Please please please help!
After struggling through errors and replacing the one line (which never worked...) I downloaded https://github.com/pettazz/pygooglevoice and put the googlevoice file in the same file I was working on. Hope this helps anyone with the same question.
still rather new to Python. I've been referencing a few blogs regarding the jnpr.junos packages. Specifically from Jeremy Schulman (http://forums.juniper.net/t5/Automation/Python-for-Non-Programmers-Part-2/bc-p/277682). I'm simply trying to make sure I have the commands right. I'm just attempting to pass simple commands to my SRX cluster. I'm attempting to pass the following to an SRX650 cluster.
>>> from jnpr.junos.utils.config import Config
>>> from jnpr.junos import Device
>>> dev = Device(host='devip',user='myuser',password='mypwd')
>>> dev.open()
Device(devip)
>>> cu = Config(dev)
>>> cu
jnpr.junos.utils.Config(devip)
>>> set_cmd = 'set system login message "Hello Admin!"'
>>> cu.load(set_cmd,format='set')
Warning (from warnings module):
File "C:\Python27\lib\site-packages\junos_eznc-1.0.0- py2.7.egg\jnpr\junos\utils\config.py", line 273
if any([e.find('[error-severity="error"]') for e in rerrs]):
FutureWarning: The behavior of this method will change in future versions. Use specific 'len(elem)' or 'elem is not None' test instead.
Traceback (most recent call last):
File "<pyshell#8>", line 1, in <module>
cu.load(set_cmd,format='set')
File "C:\Python27\lib\site-packages\junos_eznc-1.0.0- py2.7.egg\jnpr\junos\utils\config.py", line 296, in load
return try_load(rpc_contents, rpc_xattrs)
File "C:\Python27\lib\site-packages\junos_eznc-1.0.0-py2.7.egg\jnpr\junos\utils\config.py", line 274, in try_load
raise err
RpcError
I've done quite a bit of searching and can't seem to find anything as to why this RPC error is popping up. I've confirmed that the syntax is correct and read through the jnpr.junos documentation for Junos EZ.
Found that I was using an outdated version of junos.eznc. Running pip install -U junos-eznc updated me to junos.eznc 1.3.1. After doing this, my script worked properly.