What's the proper way to tell a looping thread to stop looping?
I have a fairly simple program that pings a specified host in a separate threading.Thread class. In this class it sleeps 60 seconds, the runs again until the application quits.
I'd like to implement a 'Stop' button in my wx.Frame to ask the looping thread to stop. It doesn't need to end the thread right away, it can just stop looping once it wakes up.
Here is my threading class (note: I haven't implemented looping yet, but it would likely fall under the run method in PingAssets)
class PingAssets(threading.Thread):
def __init__(self, threadNum, asset, window):
threading.Thread.__init__(self)
self.threadNum = threadNum
self.window = window
self.asset = asset
def run(self):
config = controller.getConfig()
fmt = config['timefmt']
start_time = datetime.now().strftime(fmt)
try:
if onlinecheck.check_status(self.asset):
status = "online"
else:
status = "offline"
except socket.gaierror:
status = "an invalid asset tag."
msg =("{}: {} is {}. \n".format(start_time, self.asset, status))
wx.CallAfter(self.window.Logger, msg)
And in my wxPyhton Frame I have this function called from a Start button:
def CheckAsset(self, asset):
self.count += 1
thread = PingAssets(self.count, asset, self)
self.threads.append(thread)
thread.start()
Threaded stoppable function
Instead of subclassing threading.Thread, one can modify the function to allow
stopping by a flag.
We need an object, accessible to running function, to which we set the flag to stop running.
We can use threading.currentThread() object.
import threading
import time
def doit(arg):
t = threading.currentThread()
while getattr(t, "do_run", True):
print ("working on %s" % arg)
time.sleep(1)
print("Stopping as you wish.")
def main():
t = threading.Thread(target=doit, args=("task",))
t.start()
time.sleep(5)
t.do_run = False
if __name__ == "__main__":
main()
The trick is, that the running thread can have attached additional properties. The solution builds
on assumptions:
the thread has a property "do_run" with default value True
driving parent process can assign to started thread the property "do_run" to False.
Running the code, we get following output:
$ python stopthread.py
working on task
working on task
working on task
working on task
working on task
Stopping as you wish.
Pill to kill - using Event
Other alternative is to use threading.Event as function argument. It is by
default False, but external process can "set it" (to True) and function can
learn about it using wait(timeout) function.
We can wait with zero timeout, but we can also use it as the sleeping timer (used below).
def doit(stop_event, arg):
while not stop_event.wait(1):
print ("working on %s" % arg)
print("Stopping as you wish.")
def main():
pill2kill = threading.Event()
t = threading.Thread(target=doit, args=(pill2kill, "task"))
t.start()
time.sleep(5)
pill2kill.set()
t.join()
Edit: I tried this in Python 3.6. stop_event.wait() blocks the event (and so the while loop) until release. It does not return a boolean value. Using stop_event.is_set() works instead.
Stopping multiple threads with one pill
Advantage of pill to kill is better seen, if we have to stop multiple threads
at once, as one pill will work for all.
The doit will not change at all, only the main handles the threads a bit differently.
def main():
pill2kill = threading.Event()
tasks = ["task ONE", "task TWO", "task THREE"]
def thread_gen(pill2kill, tasks):
for task in tasks:
t = threading.Thread(target=doit, args=(pill2kill, task))
yield t
threads = list(thread_gen(pill2kill, tasks))
for thread in threads:
thread.start()
time.sleep(5)
pill2kill.set()
for thread in threads:
thread.join()
This has been asked before on Stack. See the following links:
Is there any way to kill a Thread in Python?
Stopping a thread after a certain amount of time
Basically you just need to set up the thread with a stop function that sets a sentinel value that the thread will check. In your case, you'll have the something in your loop check the sentinel value to see if it's changed and if it has, the loop can break and the thread can die.
I read the other questions on Stack but I was still a little confused on communicating across classes. Here is how I approached it:
I use a list to hold all my threads in the __init__ method of my wxFrame class: self.threads = []
As recommended in How to stop a looping thread in Python? I use a signal in my thread class which is set to True when initializing the threading class.
class PingAssets(threading.Thread):
def __init__(self, threadNum, asset, window):
threading.Thread.__init__(self)
self.threadNum = threadNum
self.window = window
self.asset = asset
self.signal = True
def run(self):
while self.signal:
do_stuff()
sleep()
and I can stop these threads by iterating over my threads:
def OnStop(self, e):
for t in self.threads:
t.signal = False
I had a different approach. I've sub-classed a Thread class and in the constructor I've created an Event object. Then I've written custom join() method, which first sets this event and then calls a parent's version of itself.
Here is my class, I'm using for serial port communication in wxPython app:
import wx, threading, serial, Events, Queue
class PumpThread(threading.Thread):
def __init__ (self, port, queue, parent):
super(PumpThread, self).__init__()
self.port = port
self.queue = queue
self.parent = parent
self.serial = serial.Serial()
self.serial.port = self.port
self.serial.timeout = 0.5
self.serial.baudrate = 9600
self.serial.parity = 'N'
self.stopRequest = threading.Event()
def run (self):
try:
self.serial.open()
except Exception, ex:
print ("[ERROR]\tUnable to open port {}".format(self.port))
print ("[ERROR]\t{}\n\n{}".format(ex.message, ex.traceback))
self.stopRequest.set()
else:
print ("[INFO]\tListening port {}".format(self.port))
self.serial.write("FLOW?\r")
while not self.stopRequest.isSet():
msg = ''
if not self.queue.empty():
try:
command = self.queue.get()
self.serial.write(command)
except Queue.Empty:
continue
while self.serial.inWaiting():
char = self.serial.read(1)
if '\r' in char and len(msg) > 1:
char = ''
#~ print('[DATA]\t{}'.format(msg))
event = Events.PumpDataEvent(Events.SERIALRX, wx.ID_ANY, msg)
wx.PostEvent(self.parent, event)
msg = ''
break
msg += char
self.serial.close()
def join (self, timeout=None):
self.stopRequest.set()
super(PumpThread, self).join(timeout)
def SetPort (self, serial):
self.serial = serial
def Write (self, msg):
if self.serial.is_open:
self.queue.put(msg)
else:
print("[ERROR]\tPort {} is not open!".format(self.port))
def Stop(self):
if self.isAlive():
self.join()
The Queue is used for sending messages to the port and main loop takes responses back. I've used no serial.readline() method, because of different end-line char, and I have found the usage of io classes to be too much fuss.
Depends on what you run in that thread.
If that's your code, then you can implement a stop condition (see other answers).
However, if what you want is to run someone else's code, then you should fork and start a process. Like this:
import multiprocessing
proc = multiprocessing.Process(target=your_proc_function, args=())
proc.start()
now, whenever you want to stop that process, send it a SIGTERM like this:
proc.terminate()
proc.join()
And it's not slow: fractions of a second.
Enjoy :)
My solution is:
import threading, time
def a():
t = threading.currentThread()
while getattr(t, "do_run", True):
print('Do something')
time.sleep(1)
def getThreadByName(name):
threads = threading.enumerate() #Threads list
for thread in threads:
if thread.name == name:
return thread
threading.Thread(target=a, name='228').start() #Init thread
t = getThreadByName('228') #Get thread by name
time.sleep(5)
t.do_run = False #Signal to stop thread
t.join()
I find it useful to have a class, derived from threading.Thread, to encapsulate my thread functionality. You simply provide your own main loop in an overridden version of run() in this class. Calling start() arranges for the object’s run() method to be invoked in a separate thread.
Inside the main loop, periodically check whether a threading.Event has been set. Such an event is thread-safe.
Inside this class, you have your own join() method that sets the stop event object before calling the join() method of the base class. It can optionally take a time value to pass to the base class's join() method to ensure your thread is terminated in a short amount of time.
import threading
import time
class MyThread(threading.Thread):
def __init__(self, sleep_time=0.1):
self._stop_event = threading.Event()
self._sleep_time = sleep_time
"""call base class constructor"""
super().__init__()
def run(self):
"""main control loop"""
while not self._stop_event.isSet():
#do work
print("hi")
self._stop_event.wait(self._sleep_time)
def join(self, timeout=None):
"""set stop event and join within a given time period"""
self._stop_event.set()
super().join(timeout)
if __name__ == "__main__":
t = MyThread()
t.start()
time.sleep(5)
t.join(1) #wait 1s max
Having a small sleep inside the main loop before checking the threading.Event is less CPU intensive than looping continuously. You can have a default sleep time (e.g. 0.1s), but you can also pass the value in the constructor.
Sometimes you don't have control over the running target. In those cases you can use signal.pthread_kill to send a stop signal.
from signal import pthread_kill, SIGTSTP
from threading import Thread
from itertools import count
from time import sleep
def target():
for num in count():
print(num)
sleep(1)
thread = Thread(target=target)
thread.start()
sleep(5)
pthread_kill(thread.ident, SIGTSTP)
result
0
1
2
3
4
[14]+ Stopped
import time
import threading
class Check(threading.Thread):
def __init__(self):
self.stopped = False
threading.Thread.__init__(self)
def run(self):
i = 0
while not self.stopped:
time.sleep(1)
i = i + 1
print(i)
if(i==5):
self.stopped = True
inst = Check()
inst.start()
You have to set up your own mechanism for stopping a thread--Python doesn't have a built-in way to do it. This is actually a common problem among many languages, not just Python.
import time
import threading
class Check(threading.Thread):
def __init__(self):
threading.Thread.__init__(self)
# An event can be useful here, though a simple boolean works too since
# assignment is atomic in Python.
self.stop_event = threading.Event()
def run(self):
i = 0
while not self.stop_event.is_set():
time.sleep(1)
i = i + 1
print(i)
if(i==5):
self.stopped = True
def stop(self):
# Tell the thread to stop...
self.stop_event.set()
# Wait for the thread to stop
self.join()
inst = Check()
inst.start()
# Do stuff...
time.sleep(1)
inst.stop()
# Thread has stopped, but the main thread is still running...
print("I'm still here!")
Here I use an event to signal whether or not the thread should stop. We add a stop method to signal the event and then wait for the thread to finish processing before continuing. This is very simplistic, but hopefully it gives you the idea of the kind of strategy you can take. It gets much more complicated if you want to handle error conditions like being informed if an error occurred in the run() method or if the body of the run() method is taking too long, etc.
I have the following python script:
#! /usr/bin/python
import os
from gps import *
from time import *
import time
import threading
import sys
gpsd = None #seting the global variable
class GpsPoller(threading.Thread):
def __init__(self):
threading.Thread.__init__(self)
global gpsd #bring it in scope
gpsd = gps(mode=WATCH_ENABLE) #starting the stream of info
self.current_value = None
self.running = True #setting the thread running to true
def run(self):
global gpsd
while gpsp.running:
gpsd.next() #this will continue to loop and grab EACH set of gpsd info to clear the buffer
if __name__ == '__main__':
gpsp = GpsPoller() # create the thread
try:
gpsp.start() # start it up
while True:
print gpsd.fix.speed
time.sleep(1) ## <<<< THIS LINE HERE
except (KeyboardInterrupt, SystemExit): #when you press ctrl+c
print "\nKilling Thread..."
gpsp.running = False
gpsp.join() # wait for the thread to finish what it's doing
print "Done.\nExiting."
I'm not very good with python, unfortunately. The script should be multi-threaded somehow (but that probably doesn't matter in the scope of this question).
What baffles me is the gpsd.next() line. If I get it right, it was supposed to tell the script that new gps data have been acquired and are ready to be read.
However, I read the data using the infinite while True loop with a 1 second pause with time.sleep(1).
What this does, however, is that it sometimes echoes the same data twice (the sensor hasn't updated the data in the last second). I figure it also skips some sensor data somehow too.
Can I somehow change the script to print the current speed not every second, but every time the sensor reports new data? According to the data sheet it should be every second (a 1 Hz sensor), but obviously it isn't exactly 1 second, but varies by milliseconds.
As a generic design rule, you should have one thread for each input channel or more generic, for each "loop over a blocking call". Blocking means that the execution stops at that call until data arrives. E.g. gpsd.next() is such a call.
To synchronize multiple input channels, use a Queue and one extra thread. Each input thread should put its "events" on the (same) queue. The extra thread loops over queue.get() and reacts appropriately.
From this point of view, your script need not be multithreaded, since there is only one input channel, namely the gpsd.next() loop.
Example code:
from gps import *
class GpsPoller(object):
def __init__(self, action):
self.gpsd = gps(mode=WATCH_ENABLE) #starting the stream of info
self.action=action
def run(self):
while True:
self.gpsd.next()
self.action(self.gpsd)
def myaction(gpsd):
print gpsd.fix.speed
if __name__ == '__main__':
gpsp = GpsPoller(myaction)
gpsp.run() # runs until killed by Ctrl-C
Note how the use of the action callback separates the plumbing from the data evaluation.
To embed the poller into a script doing other stuff (i.e. handling other threads as well), use the queue approach. Example code, building on the GpsPoller class:
from threading import Thread
from Queue import Queue
class GpsThread(object):
def __init__(self, valuefunc, queue):
self.valuefunc = valuefunc
self.queue = queue
self.poller = GpsPoller(self.on_value)
def start(self):
self.t = Thread(target=self.poller.run)
self.t.daemon = True # kill thread when main thread exits
self.t.start()
def on_value(self, gpsd):
# note that we extract the value right here.
# Otherwise it could change while the event is in the queue.
self.queue.put(('gps', self.valuefunc(gpsd)))
def main():
q = Queue()
gt = GpsThread(
valuefunc=lambda gpsd: gpsd.fix.speed,
queue = q
)
print 'press Ctrl-C to stop.'
gt.start()
while True:
# blocks while q is empty.
source, data = q.get()
if source == 'gps':
print data
The "action" we give to the GpsPoller says "calculate a value by valuefunc and put it in the queue". The mainloop sits there until a value pops out, then prints it and continues.
It is also straightforward to put other Thread's events on the queue and add the appropriate handling code.
I see two options here:
GpsPoller will check if data changed and raise a flag
GpsPoller will check id data changed and put new data in the queue.
Option #1:
global is_speed_changed = False
def run(self):
global gpsd, is_speed_changed
while gpsp.running:
prev_speed = gpsd.fix.speed
gpsd.next()
if prev_speed != gpsd.fix.speed
is_speed_changed = True # raising flag
while True:
if is_speed_changed:
print gpsd.fix.speed
is_speed_changed = False
Option #2 ( I prefer this one since it protects us from raise conditions):
gpsd_queue = Queue.Queue()
def run(self):
global gpsd
while gpsp.running:
prev_speed = gpsd.fix.speed
gpsd.next()
curr_speed = gpsd.fix.speed
if prev_speed != curr_speed:
gpsd_queue.put(curr_speed) # putting new speed to queue
while True:
# get will block if queue is empty
print gpsd_queue.get()
I have a very simple example, it prints out the names, but the problem is, when I press ctrl+C, the program doesn't return to the normal command line interface:
^CStopping
After I only see my cursor blinking, but I can't do anything, so I have to close the window and open it up again.
I'm running Ubuntu 12.10.
that's my code:
import threading
import random
import time
import Queue
import urllib2
import sys
queue = Queue.Queue()
keep_running = True
class MyThread(threading.Thread):
def __init__(self, queue):
threading.Thread.__init__(self)
self.queue = queue
self.names = ['Sophia', 'Irina', 'Tanya', 'Cait', 'Jess']
def run(self):
while keep_running:
time.sleep(0.25)
line = self.names[random.randint(0,len(self.names)-1)]
queue.put(line)
self.queue.task_done()
class Starter():
def __init__(self):
self.queue = queue
t = MyThread(self.queue)
t.start()
self.next()
def next(self):
while True:
time.sleep(0.2)
if not self.queue.empty():
line = self.queue.get()
print line, self.queue.qsize()
else:
print 'waiting for queue'
def main():
try:
Starter()
queue.join()
except KeyboardInterrupt, e:
print 'Stopping'
keep_running = False
sys.exit(1)
main()
Your main problem is that you didn't declare keep_running as global, so main is just creating a local variable with the same name.
If you fix that, it will usually exit on some platforms.
If you want it to always exit on all platforms, you need to do two more things:
join the thread that you created.
protect the shared global variable with a Lock or other sync mechanism.
However, a shared global keep_running flag isn't really needed here anyway. You've already got a queue. Just define a special "shutdown" message you can post on the queue, or use closing the queue as a signal to shutdown.
While we're at it, unless you're trying to simulate a slow network or something, there is no need for that time.sleep in your code. Just call self.queue.get(timeout=0.2). That way, instead of always taking 0.2 seconds to get each entry, it will take up to 0.2 seconds, but as little as 0 if there's already something there.
Your main thread is stuck in Starter.next. The interrupt then is called there and propagates up to the first line of the try statement and is caught, jumping to the except clause before join can be called. Try putting the join call in a finally block (with the sys.exit) or simply moving it to th exception handler
I'm trying to create a kind of non-blocking class in python, but I'm not sure how.
I'd like a class to be a thread itself, detached from the main thread so other threads can interact with it.
In a little example:
#!/usr/bin/python2.4
import threading
import time
class Sample(threading.Thread):
def __init__(self):
super(Sample, self).__init__()
self.status = 1
self.stop = False
def run(self):
while not(self.stop):
pass
def getStatus(self):
return self.status
def setStatus(self, status):
self.status = status
def test(self):
while self.status != 0:
time.sleep(2)
#main
sample = Sample()
sample.start()
sample.test()
sample.setStatus(0)
sample.stop()
What I'd like is having the "sample" instance running as a separate thread (detached from the main one) so, in the example, when the main thread reaches sample.test(), sample (and only "sample") would go to sleep for 2 seconds. In the meanwhile, the main thread would continue its execution and set sample's status to 0. When after the 2 seconds "sample" wakes up it would see the status=0 and exit the while loop.
The problem is that if I do this, the line sample.setStatus(0) is never reached (creating an infinite loop). I have named the threads, and it turns out that by doing this, test() is run by the main thread.
I guess I don't get the threading in python that well...
Thank you in advance
The object's run() method is what executes in a separate thread. When you call sample.test(), that executes in the main thread, so you get your infinite loop.
Perhaps something like this?
import threading
import time
class Sample(threading.Thread):
def __init__(self):
super(Sample, self).__init__()
self.stop = False
def run(self):
while not(self.stop):
print('hi')
time.sleep(.1)
def test(self):
print('testing...')
time.sleep(2)
#main
sample = Sample()
sample.start() # Initiates second thread which calls sample.run()
sample.test() # Main thread calls sample.test
sample.stop=True # Main thread sets sample.stop
sample.join() # Main thread waits for second thread to finish