encoding = ('utf-8')
data = b"C:\Users\victim\Desktop\test1.exe"
print (data.decode(encoding))
when I run it I get the following
C:\Users[]ictim\Desktop est1.exe
what I need to get is C:\Users\victim\Desktop\test1.exe
You'll need to escape the \ characters, otherwise it'll pick up on the character next to it and take it as a \t. Try:
>>> encoding = ('utf-8')
>>> data = b"C:\\Users\\victim\\Desktop\\test1.exe"
>>> print (data.decode(encoding))
C:\Users\victim\Desktop\test1.exe
Alternatively, skip the encoding part, and just define your string as raw:
data = r"C:\Users\victim\Desktop\test1.exe"
Related
So I am reading and manipulate a file with :
base_file = open(path+'/'+base_name, "r")
lines = base_file.readlines()
After this I search and find the "raw_data" start of line.
if re.match("\s{0,100}raw_data: ",line):
split_line = line.split("raw_data:")
print(split_line)
raw_string = split_line[1]
One example of raw_data is:
raw_data: "&\276!\300\307 =\277\"O\271\277vH9?j?\345?#\243\264=\350\034\345\277\260\345\033\300\023\017(#z|\273\277L\}\277\210\\031\300\213\263z\277\302\241\033\300\000\207\323\277\247Oh>j\354\215#\364\305\201\276\361+\202#t:\304\277\344\231\243#\225k\002\300vw\262\277\362\220j\300\"(\337\276\354b8\300\230\347H\300\201\320\204\300S;N\300Z0G\300>j\210\000#\034\014\220#\231\330J#\223\025\236#\006\332\230\276\227\273\n\277\353#,#\202\205\215\277\340\356\022\300/\223\035\277\331\277\362\276a\350\013#)\353\276\277v6\316\277K\326\207\300`2)\300\004\014Q\300\340\267\271\300MV\305\300\327\010\207\300j\346o\300\377\260\216\300[\332g\300\336\266\003\300\320S\272?6\300Y#\356\250\034\300\367\277&\300\335Uq>o\010&\300r\277\252\300U\314\243\300\253d\377\300"
And raw_string will be
print(raw_data)
"&\276!\300\307
=\277\"O\271\277vH9?j?\345?#\243\264=\350\034\345\277\260\345\033\300\023\017(#z|\273\277L\}\277\210\\031\300\213\263z\277\302\241\033\300\000\207\323\277\247Oh>j\354\215#\364\305\201\276\361+\202#t:\304\277\344\231\243#\225k\002\300vw\262\277\362\220j\300\"(\337\276\354b8\300\230\347H\300\201\320\204\300S;N\300Z0G\300>j\210\000#\034\014\220#\231\330J#\223\025\236#\006\332\230\276\227\273\n\277\353#,#\202\205\215\277\340\356\022\300/\223\035\277\331\277\362\276a\350\013#)\353\276\277v6\316\277K\326\207\300`2)\300\004\014Q\300\340\267\271\300MV\305\300\327\010\207\300j\346o\300\377\260\216\300[\332g\300\336\266\003\300\320S\272?6\300Y#\356\250\034\300\367\277&\300\335Uq>o\010&\300r\277\252\300U\314\243\300\253d\377\300"
If I tried to read this file I will obtain one char to one char even for escape characters.
So, my question is how to transform this plain text to utf-8 string so that I can have one character when reading \300 and not 4 characters.
I tried to pass "encondig =utf-8" in open file method but does not work.
I have made the same example passing raw_data as variable and it works properly.
RAW_DATA = "&\276!\300\307 =\277\"O\271\277vH9?j?\345?#\243\264=\350\034\345\277\260\345\033\300\023\017(#z|\273\277L\\}\277\210\\\031\300\213\263z\277\302\241\033\300\000\207\323\277\247Oh>j\354\215#\364\305\201\276\361+\202#t:\304\277\344\231\243#\225k\002\300vw\262\277\362\220j\300\"(\337\276\354b8\300\230\347H\300\201\320\204\300S;N\300Z0G\300<I>>j\210\000#\034\014\220#\231\330J#\223\025\236#\006\332\230\276\227\273\n\277\353#,#\202\205\215\277\340\356\022\300/\223\035\277\331\277\362\276a\350\013#)\353\276\277v6\316\277K\326\207\300`2)\300\004\014Q\300\340\267\271\300MV\305\300\327\010\207\300j\346o\300\377\260\216\300[\332g\300\336\266\003\300\320S\272?6\300Y#\356\250\034\300\367\277&\300\335Uq>o\010&\300r\277\252\300U\314\243\300\253d\377\300"
print(f"Qnt -> {len(RAW_DATA)}") # Qnt -> 256
print(type(RAW_DATA))
at = 0
total = 0
while at < len(RAW_DATA):
fin = at+4
substrin = RAW_DATA[at:fin]
resu = FourString_float(substrin)
at = fin
For this example \300 is only one char.
Hope someone can help me.
The problem is that on the read file the escape \ symbols are coming in as \, but in the example you've provided they are being evaluated as part of the numerics that follow it. ie, \276 is read as a single character.
If you run:
RAW_DATA = r"&\276!\300\307 =\277\"O\271\277vH9?j?\345?#\243\264=\350\034\345\277\260\345\033\300\023\017(#z|\273\277L\\}\277\210\\\031\300\213\263z\277\302\241\033\300\000\207\323\277\247Oh>j\354\215#\364\305\201\276\361+\202#t:\304\277\344\231\243#\225k\002\300vw\262\277\362\220j\300\"(\337\276\354b8\300\230\347H\300\201\320\204\300S;N\300Z0G\300<I>>j\210\000#\034\014\220#\231\330J#\223\025\236#\006\332\230\276\227\273\n\277\353#,#\202\205\215\277\340\356\022\300/\223\035\277\331\277\362\276a\350\013#)\353\276\277v6\316\277K\326\207\300`2)\300\004\014Q\300\340\267\271\300MV\305\300\327\010\207\300j\346o\300\377\260\216\300[\332g\300\336\266\003\300\320S\272?6\300Y#\356\250\034\300\367\277&\300\335Uq>o\010&\300r\277\252\300U\314\243\300\253d\377\300"
print(f"Qnt -> {len(RAW_DATA)}") # Qnt -> 256
print(type(RAW_DATA))
at = 0
total = 0
while at < len(RAW_DATA):
fin = at+4
substrin = RAW_DATA[at:fin]
resu = FourString_float(substrin)
at = fin
You would should be getting the same error that you were getting originally. Notice that we are using the raw-string literal instead of regular string literal. This will ensure that the \ don't get escaped.
You would need to evaluate the RAW_DATA to force it to evaluate the \.
You can do something like RAW_DATA = eval(f'"{RAW_DATA}"') or
import ast
RAW_DATA = ast.literal_eval(f'"{RAW_DATA}"')
Note, the second option is a bit more secure that doing a straight eval as you are limiting the scope of what can be executed.
I have a string which includes encoded bytes inside it:
str1 = "b'Output file \xeb\xac\xb8\xed\x95\xad\xeb\xb6\x84\xec\x84\x9d.xlsx Created'"
I want to decode it, but I can't since it has become a string. Therefore I want to ask whether there is any way I can convert it into
str2 = b'Output file \xeb\xac\xb8\xed\x95\xad\xeb\xb6\x84\xec\x84\x9d.xlsx Created'
Here str2 is a bytes object which I can decode easily using
str2.decode('utf-8')
to get the final result:
'Output file 문항분석.xlsx Created'
You could use ast.literal_eval:
>>> print(str1)
b'Output file \xeb\xac\xb8\xed\x95\xad\xeb\xb6\x84\xec\x84\x9d.xlsx Created'
>>> type(str1)
<class 'str'>
>>> from ast import literal_eval
>>> literal_eval(str1).decode('utf-8')
'Output file 문항분석.xlsx Created'
Based on the SyntaxError mentioned in your comments, you may be having a testing issue when attempting to print due to the fact that stdout is set to ascii in your console (and you may also find that your console does not support some of the characters you may be trying to print). You can try something like the following to set sys.stdout to utf-8 and see what your console will print (just using string slice and encode below to get bytes rather than the ast.literal_eval approach that has already been suggested):
import codecs
import sys
sys.stdout = codecs.getwriter('utf-8')(sys.stdout.buffer)
s = "b'Output file \xeb\xac\xb8\xed\x95\xad\xeb\xb6\x84\xec\x84\x9d.xlsx Created'"
b = s[2:-1].encode().decode('utf-8')
A simple way is to assume that all the characters of the initial strings are in the [0,256) range and map to the same Unicode value, which means that it is a Latin1 encoded string.
The conversion is then trivial:
str1[2:-1].encode('Latin1').decode('utf8')
Finally I have found an answer where i use a function to cast a string to bytes without encoding.Given string
str1 = "b'Output file \xeb\xac\xb8\xed\x95\xad\xeb\xb6\x84\xec\x84\x9d.xlsx Created'"
now i take only actual encoded text inside of it
str1[2:-1]
and pass this to the function which convert the string to bytes without encoding its values
import struct
def rawbytes(s):
"""Convert a string to raw bytes without encoding"""
outlist = []
for cp in s:
num = ord(cp)
if num < 255:
outlist.append(struct.pack('B', num))
elif num < 65535:
outlist.append(struct.pack('>H', num))
else:
b = (num & 0xFF0000) >> 16
H = num & 0xFFFF
outlist.append(struct.pack('>bH', b, H))
return b''.join(outlist)
So, calling the function would convert it to bytes which then is decoded
rawbytes(str1[2:-1]).decode('utf-8')
will give the correct output
'Output file 문항분석.xlsx Created'
I'm trying to read a null terminated string but i'm having issues when unpacking a char and putting it together with a string.
This is the code:
def readString(f):
str = ''
while True:
char = readChar(f)
str = str.join(char)
if (hex(ord(char))) == '0x0':
break
return str
def readChar(f):
char = unpack('c',f.read(1))[0]
return char
Now this is giving me this error:
TypeError: sequence item 0: expected str instance, int found
I'm also trying the following:
char = unpack('c',f.read(1)).decode("ascii")
But it throws me:
AttributeError: 'tuple' object has no attribute 'decode'
I don't even know how to read the chars and add it to the string, Is there any proper way to do this?
Here's a version that (ab)uses __iter__'s lesser-known "sentinel" argument:
with open('file.txt', 'rb') as f:
val = ''.join(iter(lambda: f.read(1).decode('ascii'), '\x00'))
How about:
myString = myNullTerminatedString.split("\x00")[0]
For example:
myNullTerminatedString = "hello world\x00\x00\x00\x00\x00\x00"
myString = myNullTerminatedString.split("\x00")[0]
print(myString) # "hello world"
This works by splitting the string on the null character. Since the string should terminate at the first null character, we simply grab the first item in the list after splitting. split will return a list of one item if the delimiter doesn't exist, so it still works even if there's no null terminator at all.
It also will work with byte strings:
myByteString = b'hello world\x00'
myStr = myByteString.split(b'\x00')[0].decode('ascii') # "hello world" as normal string
If you're reading from a file, you can do a relatively larger read - estimate how much you'll need to read to find your null string. This is a lot faster than reading byte-by-byte. For example:
resultingStr = ''
while True:
buf = f.read(512)
resultingStr += buf
if len(buf)==0: break
if (b"\x00" in resultingStr):
extraBytes = resultingStr.index(b"\x00")
resultingStr = resultingStr.split(b"\x00")[0]
break
# now "resultingStr" contains the string
f.seek(0 - extraBytes,1) # seek backwards by the number of bytes, now the pointer will be on the null byte in the file
# or f.seek(1 - extraBytes,1) to skip the null byte in the file
(edit version 2, added extra way at the end)
Maybe there are some libraries out there that can help you with this, but as I don't know about them lets attack the problem at hand with what we know.
In python 2 bytes and string are basically the same thing, that change in python 3 where string is what in py2 is unicode and bytes is its own separate type, which mean that you don't need to define a read char if you are in py2 as no extra work is required, so I don't think you need that unpack function for this particular case, with that in mind lets define the new readString
def readString(myfile):
chars = []
while True:
c = myfile.read(1)
if c == chr(0):
return "".join(chars)
chars.append(c)
just like with your code I read a character one at the time but I instead save them in a list, the reason is that string are immutable so doing str+=char result in unnecessary copies; and when I find the null character return the join string. And chr is the inverse of ord, it will give you the character given its ascii value. This will exclude the null character, if its needed just move the appending...
Now lets test it with your sample file
for instance lets try to read "Sword_Wea_Dummy" from it
with open("sword.blendscn","rb") as archi:
#lets simulate that some prior processing was made by
#moving the pointer of the file
archi.seek(6)
string=readString(archi)
print "string repr:", repr(string)
print "string:", string
print ""
#and the rest of the file is there waiting to be processed
print "rest of the file: ", repr(archi.read())
and this is the output
string repr: 'Sword_Wea_Dummy'
string: Sword_Wea_Dummy
rest of the file: '\xcd\xcc\xcc=p=\x8a4:\xa66\xbfJ\x15\xc6=\x00\x00\x00\x00\xeaQ8?\x9e\x8d\x874$-i\xb3\x00\x00\x00\x00\x9b\xc6\xaa2K\x15\xc6=;\xa66?\x00\x00\x00\x00\xb8\x88\xbf#\x0e\xf3\xb1#ITuB\x00\x00\x80?\xcd\xcc\xcc=\x00\x00\x00\x00\xcd\xccL>'
other tests
>>> with open("sword.blendscn","rb") as archi:
print readString(archi)
print readString(archi)
print readString(archi)
sword
Sword_Wea_Dummy
ÍÌÌ=p=Š4:¦6¿JÆ=
>>> with open("sword.blendscn","rb") as archi:
print repr(readString(archi))
print repr(readString(archi))
print repr(readString(archi))
'sword'
'Sword_Wea_Dummy'
'\xcd\xcc\xcc=p=\x8a4:\xa66\xbfJ\x15\xc6='
>>>
Now that I think about it, you mention that the data portion is of fixed size, if that is true for all files and the structure on all of them is as follow
[unknow size data][know size data]
then that is a pattern we can exploit, we only need to know the size of the file and we can get both part smoothly as follow
import os
def getDataPair(filename,knowSize):
size = os.path.getsize(filename)
with open(filename, "rb") as archi:
unknown = archi.read(size-knowSize)
know = archi.read()
return unknown, know
and by knowing the size of the data portion, its use is simple (which I get by playing with the prior example)
>>> strins_data, data = getDataPair("sword.blendscn", 80)
>>> string_data, data = getDataPair("sword.blendscn", 80)
>>> string_data
'sword\x00Sword_Wea_Dummy\x00'
>>> data
'\xcd\xcc\xcc=p=\x8a4:\xa66\xbfJ\x15\xc6=\x00\x00\x00\x00\xeaQ8?\x9e\x8d\x874$-i\xb3\x00\x00\x00\x00\x9b\xc6\xaa2K\x15\xc6=;\xa66?\x00\x00\x00\x00\xb8\x88\xbf#\x0e\xf3\xb1#ITuB\x00\x00\x80?\xcd\xcc\xcc=\x00\x00\x00\x00\xcd\xccL>'
>>> string_data.split(chr(0))
['sword', 'Sword_Wea_Dummy', '']
>>>
Now to get each string a simple split will suffice and you can pass the rest of the file contained in data to the appropriated function to be processed
Doing file I/O one character at a time is horribly slow.
Instead use readline0, now on pypi: https://pypi.org/project/readline0/ . Or something like it.
In 3.x, there's a "newline" argument to open, but it doesn't appear to be as flexible as readline0.
Here is my implementation:
import struct
def read_null_str(f):
r_str = ""
while 1:
back_offset = f.tell()
try:
r_char = struct.unpack("c", f.read(1))[0].decode("utf8")
except:
f.seek(back_offset)
temp_char = struct.unpack("<H", f.read(2))[0]
r_char = chr(temp_char)
if ord(r_char) == 0:
return r_str
else:
r_str += r_char
I am converting a CSV to dict, all the values are loaded correctly but with one issue.
CSV :
Testing testing\nwe are into testing mode
My\nServer This is my server.
When I convert the CSV to dict and if I try to use dict.get() method it is returning None.
When I debug, I get the following output:
{'Testing': 'testing\\nwe are into testing mode', 'My\\nServer': 'This is my server.'}
The My\nServer key is having an extra backslash.
If I do .get("My\nServer"), I am getting the output as None.
Can anyone help me?
#!/usr/bin/env python
import os
import codecs
import json
from csv import reader
def get_dict(path):
with codecs.open(path, 'r', 'utf-8') as msgfile:
data = msgfile.read()
data = reader([r.encode('utf-8') for r in data.splitlines()])
newdata = []
for row in data:
newrow = []
for val in row:
newrow.append(unicode(val, 'utf-8'))
newdata.append(newrow)
return dict(newdata)
thanks
You either need to escape the newline properly, using \\n:
>>> d = {'Testing': 'testing\\nwe are into testing mode', 'My\\nServer': 'This is my server.'}
>>> d.get('My\\nServer')
'This is my server.'
or you can use a raw string literal which doesn't need extra escaping:
>>> d.get(r'My\nServer')
'This is my server.'
Note that raw string will treat all the backslash escape sequences this way, not just the newline \n.
In case you are getting the values dynamically, you can use str.encode with string_escape or unicode_escape encoding:
>>> k = 'My\nServer' # API call result
>>> k.encode('string_escape')
'My\\nServer'
>>> d.get(k.encode('string_escape'))
'This is my server.'
"\n" is newline.
If you want to represent a text like "---\n---" in Python, and not having there newline, you have to escape it.
The way you write it in code and how it gets printed differs, in code, you will have to write "\" (unless u use raw string), when printed, the extra slash will not be seen
So in your code, you shall ask:
>>> dct = {'Testing': 'testing\\nwe are into testing mode', 'My\\nServer': 'This is my server.'}
>>> dct.get("My\\nServer")
'This is my server.'
I'm falling the unicode hell.
My environment in on unix, python 2.7.3
LC_CTYPE=zh_TW.UTF-8
LANG=en_US.UTF-8
I'm trying to dump hex encoded data in human readable format, here is simplified code
#! /usr/bin/env python
# encoding:utf-8
import sys
s=u"readable\n" # previous result keep in unicode string
s2="fb is not \xfb" # data read from binary file
s += s2
print s # method 1
print s.encode('utf-8') # method 2
print s.encode('utf-8','ignore') # method 3
print s.decode('iso8859-1') # method 4
# method 1-4 display following error message
#UnicodeDecodeError: 'ascii' codec can't decode byte 0xfb
# in position 0: ordinal not in range(128)
f = open('out.txt','wb')
f.write(s)
I just want to print out the 0xfb.
I should describe more here. The key is 's += s2'.
Where s will keep my previous decoded string.
And the s2 is next string which should append into s.
If I modified as following, it occurs on write file.
s=u"readable\n"
s2="fb is not \xfb"
s += s2.decode('cp437')
print s
f=open('out.txt','wb')
f.write(s)
# UnicodeEncodeError: 'ascii' codec can't encode character
# u'\u221a' in position 1: ordinal not in range(128)
I wish the result of out.txt is
readable
fb is not \xfb
or
readable
fb is not 0xfb
[Solution]
#! /usr/bin/env python
# encoding:utf-8
import sys
import binascii
def fmtstr(s):
r = ''
for c in s:
if ord(c) > 128:
r = ''.join([r, "\\x"+binascii.hexlify(c)])
else:
r = ''.join([r, c])
return r
s=u"readable"
s2="fb is not \xfb"
s += fmtstr(s2)
print s
f=open('out.txt','wb')
f.write(s)
I strongly suspect that your code is actually erroring out on the previous line: the s += s2 one. s2 is just a series of bytes, which can't be arbitrarily tacked on to a unicode object (which is instead a series of code points).
If you had intended the '\xfb' to represent U+FB, LATIN SMALL LETTER U WITH CIRCUMFLEX, it would have been better to assign it like this instead:
s2 = u"\u00fb"
But you said that you just want to print out \xHH codes for control characters. If you just want it to be something humans can understand which still makes it apparent that special characters are in a string, then repr may be enough. First, don't have s be a unicode object, because you're treating your strings here as a series of bytes, not a series of code points.
s = s.encode('utf-8')
s += s2
print repr(s)
Finally, if you don't want the extra quotes on the outside that repr adds, for nice pretty printing or whatever, there's not a simple builtin way to do that in Python (that I know of). I've used something like this before:
import re
controlchars_re = re.compile(r'[\x00-\x31\x7f-\xff]')
def _show_control_chars(match):
txt = repr(match.group(0))
return txt[1:-1]
def escape_special_characters(s):
return controlchars_re.sub(_show_control_chars, s.replace('\\', '\\\\'))
You can pretty easily tweak the controlchars_re regex to define which characters you care about escaping.