We Keep Coding

How do I draw this shape in Turtle? [closed]

Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 2 years ago.
The community reviewed whether to reopen this question 8 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I got a challenge in a learning group today to draw this shape in python turtle library.
I cannot figure out a way to express the geometrical solution to find the angles to turn and the size of the line I need.
Can you please tell me how to draw the first polygon alone? I already know how to make the pattern.
I am in fifth grade. So please give me a solution that I can understand.

Here is the solution I came up with. It is based on this diagram:
Math background
My solution uses "trigonometry", which is a method for calculating the length of one side of a triangle from the length of another side and the angles of the triangle. This is advanced math which I would expect to be taught maybe in 9th or 10th grade. I do not expect someone in 5th grade to know trigonometry. Also I cannot explain every detail of trigonometry, because I would have to write a lot and I do not think I have the teaching skills to make it clear. I would recommend you to look at for example this video to learn about the method:
https://www.youtube.com/watch?v=5tp74g4N8EY
You could also ask your teacher for more information, or research about it on the internet on your own.
Step 1: Calculating the angles
We can do this without trigonometry.
First, we see there is a "pentagon" (5-sided polygon) in the middle. I want to know the inner angle of a corner in this "pentagon". I call this angle X:
How can we calculate the angle X? We first remember that the sum of the inner angles in a triangle is 180°. We see that we can divide a 5-sides polygon into 5-2 triangles like this:
The sum of the inner angle of each of these 5-2 triangles is 180°. So for the whole 5-sided polygon, the sum of the inner angles is 180° * (5-2). Since all angles have the same size, each angle is 180°*(5-2) / 5 = 108°. So we have X = 108°.
The angle on the other side is the same as X. This allows us the calculate the angle between the two X. I will call this angle Y:
Since a full circle is 360°, we know that 360° = 2*X + 2*Y. Therefore, Y = (360° - 2*X) / 2. We know that X = 108°, so we get Y = 72°.
Next, we see there is a triangle containing the Y angle. I want to know the angle Z at the other corner of the triangle:
The inner angles of a triangle sum up to 180°*(3-2) = 180°. Therefore, we know that 180° = 2*Y + Z, so Z = 180° - 2*Y. We know that Y = 72°, so we get Z = 36°.
We will use the angle Z a lot. You can see that every corner of the green star has angle Z. The blue star is the same as the green star except it is rotated, so all blue corners also have angle Z. The corners of the red star are twice as wide as the corners of the green and blue stars, so the corners of the red star have the angle 2*Z.
Step 2: Calculating the lengths
First, we observe that all outer corners are on a circle. We call the radius of this circle R. We do not have to calculate R. Instead, we can take any value we want for R. We will always get the same shape but in different sizes. We could call R a "parameter" of the shape.
Given some value for R, I want to know the following lengths:
Calculating A:
We start with A. We can see the following triangle:
The long side of the triangle is our radius R. The other side has length A/2 and we do not care about the third side. The angle in the right-most corner is Z/2 (with Z = 36° being the angle we calculated in the previous section). The angle S is a right-angle, so S = 90°. We can calculate the third angle T because we know that the inner angles of a triangle sum up to 180°. Therefore, 180° = S + Z/2 + T. Solving for T, we get T = 180° - S - Z/2 = 180° - 90° - 36°/2 = 72°.
Next, we use trigonometry to calculate A/2. Trigonometry teaches us that A/2 = R * sin(T). Putting in the formula for T, we get A/2 = R * sin(72°). Solving for A, we get A = 2*R*sin(72°).
If you pick some value for R, for example R = 100, you can now calculate A with this formula. You would need a calculator for sin(72°), because it would be extremely difficult to calculate this in your head. Putting sin(72) into my calculator gives me 0.951056516. So for our choice R = 100, we know that A = 2 * R * sin(72°) = 2 * 100 * 0.951056516 = 190.211303259.
Calculating B:
We use the same technique to find a formula for B. We see the following triangle:
So the bottom side is the length of our radius R. The right side is B/2. We do not care about the third side. The right-most angle is three times Z/2. The angle S is a right-angle, so we have S = 90°. We can calculate the remaining angle T with 180° = S + T + 3*Z/2. Solving for T, we get T = 180° - S - 3*Z/2 = 180° - 90° - 3*36°/2 = 36°. Ok so T = Z, we could have also seen this from the picture, but now we have calculated it anyways.
Using trigonometry, we know that B/2 = R * sin(T), so we get the formula B = 2 * R * sin(36°) to calculate B for some choice of R.
Calculating C:
We see the following triangle:
So the bottom side has length A/2 and the top side has length B. We already have formulas for both of these sides. The third side is C, for which we want to find a formula. The right-most angle is Z. The angle S is a right-angle, so S = 90°. The top-most angle is three times Z/2.
Using trigonometry, we get C = sin(Z) * B.
Calculating D:
We see the following triangle:
We already have a formula for C. We want to find a formula for D. The top-most angle is Z/2 (I could not fit the text into the triangle). The bottom-left angle S is a right-angle.
Using trigonometry, we know that D = tan(Z/2) * C. The tan function is similar to the sin from the previous formulas. You can again put it into your calculator to compute the value, so for Z = 36°, I can put tan(36/2) into my calculator and it gives me 0.324919696.
Calculating E:
Ok this is easy, E = 2*D.
Halfway done already!
Calculating F:
This is similar to A and B:
We want to find a formula for F. The top side has length F/2. The bottom side has the length of our radius R. The right-most corner has angle Z. S is a right-angle. We can calculate T = 180° - S - Z = 180° - 90° - Z = 90° - Z.
Using trigonometry, we get F/2 = R * sin(T). Putting in the formula for T gives us F/2 = R*sin(90° - Z). Solving for F gives us F = 2*R*sin(90°-Z).
Calculating G:
We see the following triangle:
The top side has length F, we already know a formula for it. The right side has length G, we want to find a formula for it. We do not care about the bottom side. The left-most corner has angle Z/2. The right-most corner has angle 2*Z. The bottom corner has angle S, which is a right-angle, so S = 90°. It was not immediately obvious to me that the red line and the green line are perfectly perpendicular to each other so that S really is a right-angle, but you can verify this by using the formula for the inner angles of a triangle, which gives you 180° = Z/2 + 2*Z + S. Solving for S gives us S = 180° - Z/2 - 2*Z. Using Z = 36°, we get S = 180° - 36°/2 - 2* 36° = 90°.
Using trigonometry, we get G = F * sin(Z/2).
Calculating H:
We see the following triangle:
The right side has length G, we already have formula for that. The bottom side has length H, we want to find a formula for that. We do not care about the third side. The top corner has angle Z, the bottom-right corner has angle S. We already know that S is a right-angle from the last section.
Using trigonometry, we get H = G * tan(Z).
Calculating I:
This is easy, I is on the same line as A. We can see that A can be divided into A = I + H + E + H + I. We can simplify this to A = 2*I + 2*H + E. Solving for I gives us I = (A - 2*H - E)/2.
Calculating J:
Again this is easy, J is on the same line as F. We can see that F can be divided into F = G + J + G. We can simplify that to F = 2*G + J. Solving for J gives us J = F - 2*G.
Writing the Python program
We now have formulas for all the lines we were interested in! We can now put these into a Python program to draw the picture.
Python gives you helper functions for computing sin and tan. They are contained in the math module. So you would add import math to the top of your program, and then you can use math.sin(...) and math.tan(...) in your program. However, there is one problem: These Python functions do not use degrees to measure angles. Instead they use a different unit called "radians". Fortunately, it is easy to convert between degrees and radians: In degrees a full circle is 360°. In radians, a full circle is 2*pi, where pi is a special constant that is approximately 3.14159265359.... Therefore, we can convert an angle that is measured in degrees into an angle that is measured in radians, by dividing the angle by 360° and then multiplying it by 2*pi. We can write the following helper functions in Python:
import math
def degree_to_radians(angle_in_degrees):
full_circle_in_degrees = 360
full_circle_in_radians = 2 * math.pi
angle_in_radians = angle_in_degrees / full_circle_in_degrees * full_circle_in_radians
return angle_in_radians
def sin_from_degrees(angle_in_degrees):
angle_in_radians = degree_to_radians(angle_in_degrees)
return math.sin(angle_in_radians)
def tan_from_degrees(angle_in_degrees):
angle_in_radians = degree_to_radians(angle_in_degrees)
return math.tan(angle_in_radians)
We can now use our functions sin_from_degrees and tan_from_degrees to compute sin and tan from angles measured in degrees.
Putting it all together:
from turtle import *
import math
# Functions to calculate sin and tan ###########################################
def degree_to_radians(angle_in_degrees):
full_circle_in_degrees = 360
full_circle_in_radians = 2 * math.pi
angle_in_radians = angle_in_degrees / full_circle_in_degrees * full_circle_in_radians
return angle_in_radians
def sin_from_degrees(angle_in_degrees):
angle_in_radians = degree_to_radians(angle_in_degrees)
return math.sin(angle_in_radians)
def tan_from_degrees(angle_in_degrees):
angle_in_radians = degree_to_radians(angle_in_degrees)
return math.tan(angle_in_radians)
# Functions to calculate the angles ############################################
def get_X():
num_corners = 5
return (num_corners-2)*180 / num_corners
def get_Y():
return (360 - 2*get_X()) / 2
def get_Z():
return 180 - 2*get_Y()
# Functions to calculate the lengths ###########################################
def get_A(radius):
Z = get_Z()
return 2 * radius * sin_from_degrees(90 - Z/2)
def get_B(radius):
Z = get_Z()
return 2 * radius * sin_from_degrees(90 - 3*Z/2)
def get_C(radius):
Z = get_Z()
return sin_from_degrees(Z) * get_B(radius)
def get_D(radius):
Z = get_Z()
return tan_from_degrees(Z/2) * get_C(radius)
def get_E(radius):
return 2 * get_D(radius)
def get_F(radius):
Z = get_Z()
return 2 * radius * sin_from_degrees(90 - Z)
def get_G(radius):
Z = get_Z()
return get_F(radius) * sin_from_degrees(Z/2)
def get_H(radius):
Z = get_Z()
return get_G(radius) * tan_from_degrees(Z)
def get_I(radius):
A = get_A(radius)
E = get_E(radius)
H = get_H(radius)
return (A - E - 2*H) / 2
def get_J(radius):
F = get_F(radius)
G = get_G(radius)
return F - 2*G
# Functions to draw the stars ##################################################
def back_to_center():
penup()
goto(0, 0)
setheading(0)
pendown()
def draw_small_star(radius):
penup()
forward(radius)
pendown()
Z = get_Z()
left(180)
right(Z/2)
E = get_E(radius)
H = get_H(radius)
I = get_I(radius)
for i in range(0,5):
penup()
forward(I)
pendown()
forward(H)
penup()
forward(E)
pendown()
forward(H)
penup()
forward(I)
left(180)
right(Z)
back_to_center()
def draw_green_star(radius):
pencolor('green')
draw_small_star(radius)
def draw_blue_star(radius):
pencolor('blue')
Z = get_Z()
left(Z)
draw_small_star(radius)
def draw_red_star(radius):
pencolor('red')
Z = get_Z()
penup()
forward(radius)
pendown()
left(180)
right(Z)
G = get_G(radius)
J = get_J(radius)
for i in range(0,10):
pendown()
forward(G)
penup()
forward(J)
pendown()
forward(G)
left(180)
right(2*Z)
back_to_center()
def draw_shape(radius):
draw_green_star(radius)
draw_blue_star(radius)
draw_red_star(radius)
radius = 400
draw_shape(radius)
done()
Output:

Here's a different solution. It's based on a kite polygon where the upper portion is a pair of 3-4-5 right triangles and the lower portion is a pair of 8-15-17 right triangles:
from turtle import Screen, Turtle
KITES = 10
RADIUS = 100
def kite(t):
t.right(37)
t.forward(100)
t.right(81)
t.forward(170)
t.right(124)
t.forward(170)
t.right(81)
t.forward(100)
t.right(37)
turtle = Turtle()
turtle.penup()
turtle.sety(-RADIUS)
for _ in range(KITES):
turtle.circle(RADIUS, extent=180/KITES)
turtle.pendown()
kite(turtle)
turtle.penup()
turtle.circle(RADIUS, extent=180/KITES)
turtle.hideturtle()
screen = Screen()
screen.exitonclick()

(Yes, I'm obsessed with this puzzle.) I was sufficiently impressed by the brevity of #AnnZen's solution, I decided to see if I could come up with an even shorter one. The only unique structure in this polygon is the side of the kite:
So the problem becomes drawing ten of these in a circular fashion, and then reversing the code to draw them again in the opposite direction:
from turtle import *
for _ in range(2):
for _ in range(10):
fd(105)
lt(90)
fd(76.5)
pu()
bk(153)
rt(54)
pd()
lt(72)
lt, rt = rt, lt
done()

My Short code:
from turtle import *
for f, t in [(0,-72),(71,108),(71,0)]*10+[(29,90),(73,72),(73,90),(29,72)]*10:fd(f),rt(t)

Here's the solution:
import turtle
#turtle.tracer(0)
a = turtle.Turtle()
for _ in range(10):
a.forward(100)
a.right(90)
a.forward(73)
a.right(72)
a.forward(73)
a.backward(73)
a.right(108)
a.forward(73)
a.right(90)
a.penup()
a.forward(100)
a.pendown()
a.forward(100)
a.right(108)
#turtle.update()

Let's look at a yet another approach to drawing this shape. We'll start with the same diagram as #f9c69e9781fa194211448473495534
Using a ruler (1" = 100px) and protractor on the OP's original image, we can approximate this diagram with very simple code:
from turtle import Screen, Turtle
turtle = Turtle()
turtle.hideturtle()
turtle.penup() # center on the screen
turtle.setposition(-170, -125)
turtle.pendown()
for _ in range(10):
turtle.forward(340)
turtle.left(126)
turtle.forward(400)
turtle.left(126)
screen = Screen()
screen.exitonclick()
This is equivalent to drawing with a pencil and not lifting it nor overdrawing (backing up) on any line.
To make the shape we want pop out, we divide the two lines that we draw above into segments that are thinner and thicker. The first line breaks into three segments and the second into five:
To do this, we simply break the forward() calls in our loop into wide and narrow segments:
for _ in range(10):
turtle.width(4)
turtle.forward(105)
turtle.width(1)
turtle.forward(130)
turtle.width(4)
turtle.forward(105)
turtle.left(126)
turtle.width(1)
turtle.forward(76.5)
turtle.width(4)
turtle.forward(76.5)
turtle.width(1)
turtle.forward(94)
turtle.width(4)
turtle.forward(76.5)
turtle.width(1)
turtle.forward(76.5)
turtle.left(126)
Finally, we replace the thickness changes with lifting and lowering the pen:
Which is simply a matter of replacing the width() calls with penup() and pendown():
for _ in range(10):
turtle.pendown()
turtle.forward(105)
turtle.penup()
turtle.forward(130)
turtle.pendown()
turtle.forward(105)
turtle.left(126)
turtle.penup()
turtle.forward(76.5)
turtle.pendown()
turtle.forward(76.5)
turtle.penup()
turtle.forward(94)
turtle.pendown()
turtle.forward(76.5)
turtle.penup()
turtle.forward(76.5)
turtle.left(126)

How to get the points of a bezier curve/parabola using 3 unique points on a graph

I'm trying to make a parabolic/bezier curve between two main points (using a third point as the control point) and cannot work out how to do it.
from turtle import *
pointA = (0.00,50.00)
pointB = (0.00,350.00)
pointC = (-300.00,50.00)
pu()
goto(pointB)
pd()
dot()
goto(pointC)
dot()
ht()
this creates a line between the 2 points that are my main points,
i also want to make a curve using pointA so i can have multiple lines,
i have already ruled out the possibility of parabolic curves because that equation doesn't fit on a parabola unless i rotate the plane but thats a whole other kettle of fish i'm not ready for.
i would love some help as i am decently stuck,
thank you
Edit:
i have tried a fair few things none of them got close, i ended up resorting to just running with a midpoint translated a few pixels. E.G.
for j in range(3):
pu()
goto(pointB)
pd()
dot()
midpoint = ((pointB[0]+pointC[0])/2, (pointB[1]+pointC[1])/2)
goto(midpoint[0]+(20*j), midpoint[1])
goto(pointC)
dot()
this is a more realistic use of what im using it for, except i want to change that solid line into a variable line as dependednt on the position of the two points it will be on the same line, thus making it look like 1 singular line.

Based on Wikipedia's explanation of quadratic Bézier curves we should be able to simply do:
from turtle import Screen, Turtle, Vec2D
p0 = Vec2D(0, 50)
p1 = Vec2D(-300, 50)
p2 = Vec2D(0, 350)
b = lambda t: p1 + (1 - t)**2 * (p0 - p1) + t**2 * (p2 - p1)
turtle = Turtle()
turtle.penup()
for position in [p2, p1, p0]:
turtle.goto(position)
turtle.dot()
turtle.pendown()
t = 0
while t <= 1:
position = b(t)
turtle.setheading(turtle.towards(position))
turtle.goto(position)
t += 0.1
screen = Screen()
screen.exitonclick()

Random Walk - Any Direction

I'm new to this, but I'm trying to create a program that goes on a Random Walk in turtle and I have no idea what I'm doing.This is the program that I need to create Requirements, and this is what I have so far Code. I'm starting to get a little lost, and am wondering if I 'm headed towards the right direction or if i need to scrap it and start all over again
Thanks,
import turtle
import random
import math
def start():
myS = turtle.Screen()
myS.title("Random Walk")
border = 50
myWin.setworldcoordinates(-border, -border, border, border)
def go(heading, step_size):
turtle.setheading(heading)
turtle.forward(step_size)
def random_walk(step_size, steps):
angle = random.random() * 2 * math.pi
x = 0
y = 0
x = x + math.cos(angle)
y = y + math.sin(angle)
coord = (x, y)
for _ in range(steps):
go(random.choice(coord), step_size)
if __name__ == '__main__':
turtle.hideturtle()
turtle.speed('fastest')
random_walk(15, 1000)

Your random_walk function does way to many things; I think it grew over your head a little. What it should do for every step:
Calculate a random angle between 0 and 2*math.pi
Calculate x and y with the given formulas
Call turtle.goto(x,y) to go to these coordinates
Also there was a little typo in start.
import turtle
import random
import math
def start():
myS = turtle.Screen()
myS.title("Random Walk")
border = 50
myS.setworldcoordinates(-border, -border, border, border)
def go(heading, step_size):
turtle.setheading(heading)
turtle.forward(step_size)
def random_walk(steps):
x = 0
y = 0
for i in range(steps):
angle = random.random()*2*math.pi
x = x + math.cos(angle)
y = y + math.sin(angle)
turtle.goto(x,y)
if __name__=="__main__":
start()
random_walk(100)

Because this looks like a homework assignment I don't want to just fix your errors but instead give you pointers to the right solution. I will also hide hints behind spoilers...
if you run random_walk() with e.g. parameters random_walk(1, 1) your will notice that the direction of the walk will not appear random. Use some form of debugging to find out why that is
your go() functions expects an angle, look at what random.choice() produces
if you fix the issue number 1. you will see that the turtle will not draw a random line at all again
looks like the angle does not change every step. find a solution that updates the angle before each step!
units of angles: find out what unit setheading() expects: hint
your requirements mention the output of straight line distance and distance travelled. This somehow sounds like you need some form of tally variable (one or several). hint: if you read the turtle documentation carefully you might find a funtion that maybe makes this task easier
read the documentation for turtle.position().

Can't draw parabolic curve correctly with turtle graphics

I'm making a game like 'angry bird'.
There are two input:power and angle.
I apply those inputs to parabolic curve.
My turtle flies, making a parabolic curve. and my turtle have to hit the target,
but my turtle draws strange curve when angle is greater than 46, angle is 30, 40 etc...
I don't know where is problem....here is my code:
import turtle
import random
import math
g=9.80665
origin_x=-480
origin_y=-180
flag=False
def create_target():
x=random.randint(0,500)
y=random.randint(-200,0)
target=turtle.Turtle()
target.hideturtle()
target.penup()
target.goto(x,y)
target.shape('square')
target.color('red')
target.showturtle()
return target
def create_turtle():
homework=turtle.Turtle()
homework.hideturtle()
homework.penup()
homework.speed(0)
homework.goto(origin_x,origin_y)
homework.pendown()
homework.shape('turtle')
homework.color('blue')
homework.left(45)
homework.showturtle()
return homework
def setting():
'''drawing back ground lines'''
setting=turtle.Turtle()
setting.hideturtle()
setting.speed(0)
turtle.colormode(255)
setting.pencolor(214,214,214)
for y in range(100,-101,-100):
setting.penup()
setting.goto(-500,y)
setting.pendown()
setting.goto(500,y)
for x in range(-375,500,125):
setting.penup()
setting.goto(x,200)
setting.pendown()
setting.goto(x,-200)
def throw_turtle(turtle,target):
angle=int(input("Enter Angle:"))
power=int(input("Enter Power:"))
'''
parabola fomula:
x coordinate: speed(in here, that is power) * cos(anlge)*time
y coordinate: speed*sin(angle)*time - (gravity speed*time**2)/2
'''
for time in range(1,20):
# the origin fomula is for the situation that starts from (0,0). so I think
# I should compensate it, but is it right?
x=power*math.cos(angle)*time + origin_x
y=power*math.sin(angle)*time - (((time**2)*g)/2) + origin_y
if x<origin_x: # I think it has problem...
x-=origin_x
turtle.goto(x,y)
turtle.stamp() #this is for testing
if (x==target.xcor()) and (y==target.ycor()):
print("******Target is HIT!!! ******")
print("End of Game")
flag=True
break
else:
print("You missed...")
turtle.setup(1000,400)
windo=turtle.Screen()
windo.title('Angry Turtle')
setting()
#__main
my_turtle=create_turtle()
while flag==False:
target=create_target()
my_turtle=create_turtle()
my_turtle.speed(6)
throw_turtle(my_turtle,target)
my_turtle.hideturtle()
target.hideturtle()
I think create_target() and create_turtle(), and setting() don't have problem...

Below, I reduce your code to a MVCE (minimal, complete, and verifiable example) to examine the parabolic curve drawing code. The problem I found with it is the usual one of the difference between degrees and radians. The Python math library thinks in radians but provides a conversion function for degrees. The Python turtle library thinks in degress, by default, but can switch to radians using turtle.radians(). Either way is fine but the usage has to be consistent:
from turtle import Turtle, Screen
import math
import random
G = 9.80665
origin_x = -480
origin_y = -180
def create_turtle():
homework = Turtle(shape='turtle')
homework.hideturtle()
homework.penup()
homework.goto(origin_x, origin_y)
homework.pendown()
homework.speed(0)
homework.left(45)
homework.showturtle()
return homework
def throw_turtle(turtle):
angle = int(input("Enter Angle (in degrees): "))
power = int(input("Enter Power: "))
# parabola formula:
# x coordinate: speed(in here, that is power) * cos(angle)*time
# y coordinate: speed*sin(angle)*time - (gravity speed * time**2)/2
for time in range(1, 20):
x = power * math.cos(math.radians(angle)) * time + origin_x
y = power * math.sin(math.radians(angle)) * time - (((time ** 2) * G) / 2) + origin_y
turtle.goto(x, y)
turtle.stamp() # this is for testing
window = Screen()
window.setup(1000, 400)
for _ in range(3):
my_turtle = create_turtle()
my_turtle.color(random.choice(['red', 'green', 'blue', 'purple', 'black']))
throw_turtle(my_turtle)
window.exitonclick()
EXAMPLE
> python3 test.py
Enter Angle (in degrees): 30
Enter Power: 120
Enter Angle (in degrees): 45
Enter Power: 90
Enter Angle (in degrees): 60
Enter Power: 90
>
Now, what more do you want it to do parabolic curve-wise?

Oh Thanks thanks really thanks.......!!!!
but, i have one more problem. that is, the 'if' sentence in throw_turtle function.
my intention for using that 'if' sentence is for check and end the game. but in fact, the user can not exactly correct coordinate of target. so it is impossible that end the game. so the game is endless....
to avoid that, i re-write like this.
def throw_turtle(turtle,target):
angle=int(input("Enter Angle:"))
power=int(input("Enter Power:"))
'''
parabola fomula: x coordinate: speed(in here, that is power) * cos(anlge)*time
y coordinate: speed*sin(angle)*time - (gravity speed*time**2)/2'''
for time in range(1,20):
x=power*math.cos(math.radians(angle))*time + origin_x #the origin fomula is for the situation that starts from (0,0). so i think i should compensate it. but.. is it right?
y=power*math.sin(math.radians(angle))*time - (((time**2)*g)/2) + origin_y
turtle.goto(x,y)
turtle.stamp() #this is for testing min_target_x=target.xcor()-1
max_target_x=target.xcor()+1 #the '1' means target's size
min_target_y=target.ycor()-1
max_target_y=target.ycor()+1
min_target_y=target.ycor()-1
if ((turtle.xcor()>=min_target_x) or (turtle.xcor()<=max_target_x)) and ((turtle.ycor()>=min_target_y) or (turtle.ycor()<=max_target_y)):
print("******Target is HIT!!! ******")
print("End of Game")
flag=True
break
else:
print("You missed...")

Python Drawing a Circle with X Radius Using Forward()

I'm using Python Turtles to draw a circle using forward() and right().
I have a for loop counting from 0 to 359, and each time it triggers, it moves the turtle forward 1 and right 1.
But the problem is I need specific diameters. I am nearly 100% sure I'll need to use trig, but I've tried to no avail.
I can't figure out the math how to do it. We're supposed to use forward() and right(), NOT circle().
Thanks!

Here is a working example:
import turtle
import math
def circle(radius):
turtle.up()
# go to (0, radius)
turtle.goto(0,radius)
turtle.down()
turtle.color("black")
# number of times the y axis has been crossed
times_crossed_y = 0
x_sign = 1.0
while times_crossed_y <= 1:
# move by 1/360 circumference
turtle.forward(2*math.pi*radius/360.0)
# rotate by one degree (there will be
# approx. 360 such rotations)
turtle.right(1.0)
# we use the copysign function to get the sign
# of turtle's x coordinate
x_sign_new = math.copysign(1, turtle.xcor())
if(x_sign_new != x_sign):
times_crossed_y += 1
x_sign = x_sign_new
return
circle(100)
print('finished')
turtle.done()

Well, a complete circle is 360°, and you are planning on turning 360 times, so each turn should be:
right( 360 ° / 360 ), or
right(1)
The distance traveled will be one circumference, or π * diameter, so your forward might be:
forward( diameter * π / 360 )
I haven't tested this yet -- give it a try and see how it works.

This is one of the exercises in "Think Python," in chapter 4. It really is a horrible exercise to have this early in the book, especially with the "hint" given. I'm using forward and left here, but you can switch left with right.
You should have the polygon function:
def polygon(t, length, n):
for i in range(n):
bob.fd(length)
bob.lt(360 / n)
Then you create a circle function:
def circle(t):
polygon(t, 1, 360)
That will draw a circle, no radius needed. The turtle goes forward 1, then left 1 (360 / 360), 360 times.
Then, if you want to make the circle bigger, you calculate the circumference of the circle. The hint says:
Hint: figure out the circumference of the circle and make sure that
length * n = circumference.
Ok, so the formula for circumference = 2 * pi * radius. And the hint says length * n = circumference. n = 360 (number of sides/degrees). We have circumference, so we need to solve for length.
So:
def circle(t, r):
circumference = 2 * 3.14 * r
length = circumference / 360
polygon(t, length, 360)
Now, call the function with whatever radius you want:
circle(bob, 200)