We Keep Coding

python regex combine patterns with AND and group

I am trying to use regex to match something meets the following conditions:
do not contain a "//" string
contain Chinese characters
pick up those Chinese characters
I read line by line from a file:
f = open("test.js", 'r')
lines = f.readlines()
for line in lines:
matches = regex.findall(line)
if matches:
print(matches)
First I tried to match Chinese characters using following pattern:
re.compile(r"[\u4e00-\u9fff]+")
it works and give me the output:
['下载失成功']
['下载失败']
['绑定监听']
['该功能暂未开放']
Then I tried to exclude the "//" with the following pattern and combine it to the above pattern:
re.compile(r"^(?=^(?:(?!//).)*$)(?=.*[\u4e00-\u9fff]+).*$")
it gives me the output:
[' showToastByText("该功能暂未开放");']
which is almost right but what I want is only the Chinese characters part.
I tried to add "()" but just can not pick up the part that I want.
Any advice will be appreciated, thanks :)

You don't need so complex regex for just negating // in your input and capturing the Chinese characters that appear in sequence together. For discarding the lines containing // just this (?!.*//) negative look ahead is enough and for capturing the Chinese text, you can capture with this regex [^\u4e00-\u9fff]*([\u4e00-\u9fff]+) and your overall regex becomes this,
^(?!.*//)[^\u4e00-\u9fff]*([\u4e00-\u9fff]+)
Where you can extract Chinese characters from first grouping pattern.
Explanation of above regex:
^ - Start of string
(?!.*//) - Negative look ahead that will discard the match if // is present in the line anywhere ahead
[^\u4e00-\u9fff]* - Optionally matches zero or more non-Chinese characters
([\u4e00-\u9fff]+) - Captures Chinese characters one or more and puts then in first grouping pattern.
Demo
Edit: Here are sample codes showing how to capture text from group1
import re
s = ' showToastByText("该功能暂未开放");'
m = re.search(r'^(?!.*//)[^\u4e00-\u9fff]*([\u4e00-\u9fff]+)',s)
if (m):
print(m.group(1))
Prints,
该功能暂未开放
Online Python Demo
Edit: For extracting multiple occurrence of Chinese characters as mentioned in comment
As you want to extract multiple occurrence of Chinese characters, you can check if the string does not contain // and then use findall to extract all the Chinese text. Here is a sample code demonstrating same,
import re
arr = ['showToastByText("该功能暂未开放");','//showToastByText("该功能暂未开放");','showToastByText("未开放");','showToastByText("该功能暂xxxxxx未开放");']
for s in arr:
if (re.match(r'\/\/', s)):
print(s, ' --> contains // hence not finding')
else:
print(s, ' --> ', re.findall(r'[\u4e00-\u9fff]+',s))
Prints,
showToastByText("该功能暂未开放"); --> ['该功能暂未开放']
//showToastByText("该功能暂未开放"); --> contains // hence not finding
showToastByText("未开放"); --> ['未开放']
showToastByText("该功能暂xxxxxx未开放"); --> ['该功能暂', '未开放']
Online Python demo

You don't need a positive lookahead to get the chinese characters (as it will not match anything). So we can rewrite that part to make a lazy match for .* until it finds the desired characters.
As such, using:
^(?=^(?:(?!//).)*$).*?([\u4e00-\u9fff]+).*$
Your first capture group will be the chinese characters

How to match numeric characters with no white space following

I need to match lines in text document where the line starts with numbers and the numbers are followed by nothing.... I want to include numbers that have '.' and ',' separating them.
Currently, I have:
p = re.compile('\$?\s?[0-9]+')
for i, line in enumerate(letter):
m = p.match(line)
if s !=None:
print(m)
print(line)
Which gives me this:
"15,704" and "416" -> this is good, I want this
but also this:
"$40 million...." -> I do not want to match this line or any line where the numbers are followed by words.
I've tried:
p = re.compile('\$?\s?[0-9]+[ \t\n\r\f\v]')
But it doesn't work. One reason is that it turns out there is no white space after the numbers I'm trying to match.
Appreciate any tips or tricks.

If you want to match the whole string with a regex,
you have 2 choices:
Either call re.fullmatch(pattern, string) (note full in the function name).
It tries to match just the whole string.
Or put $ anchor at the end of your regex and call re.match(pattern, string).
It tries to find a match from the start of the string.
Actually, you could also add ^ at the start of regex and call re.search(pattern,
string), but it would be a very strange combination.
I have also a remark concerning how you specified your conditions, maybe in incomplete
way: You put e.g. $40 million string and stated that the only reason to reject
it is space and letters after $40.
So actually you should have written that you want to match a string:
Possibly starting with $.
After the $ there can be a space (maybe, I'm not sure).
Then there can be a sequence of digits, dots or commas.
And nothing more.
And one more remark concerning Python literals: Apparently you have forgotten to prepend the pattern with r.
If you use r-string literal, you do not have to double backslashes inside.
So I think the most natural solution is to call a function devoted just to
match the whole string (i.e. fullmatch), without adding start / end
anchors and the whole script can be:
import re
pat = re.compile(r'(?:\$\s?)?[\d,.]+')
lines = ["416", "15,704", "$40 million"]
for line in lines:
if pat.fullmatch(line):
print(line)
Details concerning the regex:
(?: - A non-capturing group.
\$ - Consisting of a $ char.
\s? - And optional space.
)? - End of the non-capturing group and ? stating that the whole
group group is optional.
[\d,.]+ - A sequence of digits, commas and dots (note that between [
and ] the dot represents itself, so no backslash quotation is needed.
If you would like to reject strings like 2...5 or 3.,44 (no consecutive
dots or commas allowed), change the last part of the above regex to:
[\d]+(?:[,.]?[\d]+)*
Details:
[\d]+ - A sequence of digits.
(?: - A non-capturing group.
[,.] - Either a comma or a dot (single).
[\d]+ - Another sequence of digits.
)* - End of the non-capturing group, it may occur several times.

With a little modification to your code:
letter = ["15,704", "$40 million"]
p = re.compile('^\d{1,3}([\.,]\d{3})*$') # Numbers separated by commas or points
for i, line in enumerate(letter):
m = p.match(line)
if m:
print(line)
Output:
15,704

You could use the following regex:
import re
pattern = re.compile('^[0-9,.]+\s*$')
lines = ["416", "15,704", "$40 million...."]
for line in lines:
if pattern.match(line):
print(line)
Output
416
15,704
The pattern ^[0-9,.]+\s*$ matches everything that is a digit a , or ., followed by zero or more spaces. If you want to match only numbers with one , or . use the following pattern: '^\d+[,.]?\d+\s*$', code:
import re
pattern = re.compile('^\d+[,.]?\d+\s*$')
lines = ["416", "15,704", "$40 million...."]
for line in lines:
if pattern.match(line):
print(line)
Output
416
15,704
The pattern ^\d+[,.]?\d+\s*$ matches everything that starts with a group of digits (\d+) followed by an optional , or . ([,.]?) followed by a group of digits, with an optional group of spaces \s*.

Python regex to match after the text and the dot [duplicate]

I am using Python and would like to match all the words after test till a period (full-stop) or space is encountered.
text = "test : match this."
At the moment, I am using :
import re
re.match('(?<=test :).*',text)
The above code doesn't match anything. I need match this as my output.

Everything after test, including test
test.*
Everything after test, without test
(?<=test).*
Example here on regexr.com

You need to use re.search since re.match tries to match from the beging of the string. To match until a space or period is encountered.
re.search(r'(?<=test :)[^.\s]*',text)
To match all the chars until a period is encountered,
re.search(r'(?<=test :)[^.]*',text)

In a general case, as the title mentions, you may capture with (.*) pattern any 0 or more chars other than newline after any pattern(s) you want:
import re
p = re.compile(r'test\s*:\s*(.*)')
s = "test : match this."
m = p.search(s) # Run a regex search anywhere inside a string
if m: # If there is a match
print(m.group(1)) # Print Group 1 value
If you want . to match across multiple lines, compile the regex with re.DOTALL or re.S flag (or add (?s) before the pattern):
p = re.compile(r'test\s*:\s*(.*)', re.DOTALL)
p = re.compile(r'(?s)test\s*:\s*(.*)')
However, it will retrun match this.. See also a regex demo.
You can add \. pattern after (.*) to make the regex engine stop before the last . on that line:
test\s*:\s*(.*)\.
Watch out for re.match() since it will only look for a match at the beginning of the string (Avinash aleady pointed that out, but it is a very important note!)
See the regex demo and a sample Python code snippet:
import re
p = re.compile(r'test\s*:\s*(.*)\.')
s = "test : match this."
m = p.search(s) # Run a regex search anywhere inside a string
if m: # If there is a match
print(m.group(1)) # Print Group 1 value
If you want to make sure test is matched as a whole word, add \b before it (do not remove the r prefix from the string literal, or '\b' will match a BACKSPACE char!) - r'\btest\s*:\s*(.*)\.'.

I don't see why you want to use regex if you're just getting a subset from a string.
This works the same way:
if line.startswith('test:'):
print(line[5:line.find('.')])
example:
>>> line = "test: match this."
>>> print(line[5:line.find('.')])
match this
Regex is slow, it is awkward to design, and difficult to debug. There are definitely occassions to use it, but if you just want to extract the text between test: and ., then I don't think is one of those occasions.
See: https://softwareengineering.stackexchange.com/questions/113237/when-you-should-not-use-regular-expressions
For more flexibility (for example if you are looping through a list of strings you want to find at the beginning of a string and then index out) replace 5 (the length of 'test:') in the index with len(str_you_looked_for).

Python regex extract string between two braces, including new lines [duplicate]

I'm having a bit of trouble getting a Python regex to work when matching against text that spans multiple lines. The example text is ('\n' is a newline)
some Varying TEXT\n
\n
DSJFKDAFJKDAFJDSAKFJADSFLKDLAFKDSAF\n
[more of the above, ending with a newline]\n
[yep, there is a variable number of lines here]\n
\n
(repeat the above a few hundred times).
I'd like to capture two things: the 'some_Varying_TEXT' part, and all of the lines of uppercase text that comes two lines below it in one capture (i can strip out the newline characters later).
I've tried with a few approaches:
re.compile(r"^>(\w+)$$([.$]+)^$", re.MULTILINE) # try to capture both parts
re.compile(r"(^[^>][\w\s]+)$", re.MULTILINE|re.DOTALL) # just textlines
and a lot of variations hereof with no luck. The last one seems to match the lines of text one by one, which is not what I really want. I can catch the first part, no problem, but I can't seem to catch the 4-5 lines of uppercase text.
I'd like match.group(1) to be some_Varying_Text and group(2) to be line1+line2+line3+etc until the empty line is encountered.
If anyone's curious, its supposed to be a sequence of aminoacids that make up a protein.

Try this:
re.compile(r"^(.+)\n((?:\n.+)+)", re.MULTILINE)
I think your biggest problem is that you're expecting the ^ and $ anchors to match linefeeds, but they don't. In multiline mode, ^ matches the position immediately following a newline and $ matches the position immediately preceding a newline.
Be aware, too, that a newline can consist of a linefeed (\n), a carriage-return (\r), or a carriage-return+linefeed (\r\n). If you aren't certain that your target text uses only linefeeds, you should use this more inclusive version of the regex:
re.compile(r"^(.+)(?:\n|\r\n?)((?:(?:\n|\r\n?).+)+)", re.MULTILINE)
BTW, you don't want to use the DOTALL modifier here; you're relying on the fact that the dot matches everything except newlines.

This will work:
>>> import re
>>> rx_sequence=re.compile(r"^(.+?)\n\n((?:[A-Z]+\n)+)",re.MULTILINE)
>>> rx_blanks=re.compile(r"\W+") # to remove blanks and newlines
>>> text="""Some varying text1
...
... AAABBBBBBCCCCCCDDDDDDD
... EEEEEEEFFFFFFFFGGGGGGG
... HHHHHHIIIIIJJJJJJJKKKK
...
... Some varying text 2
...
... LLLLLMMMMMMNNNNNNNOOOO
... PPPPPPPQQQQQQRRRRRRSSS
... TTTTTUUUUUVVVVVVWWWWWW
... """
>>> for match in rx_sequence.finditer(text):
... title, sequence = match.groups()
... title = title.strip()
... sequence = rx_blanks.sub("",sequence)
... print "Title:",title
... print "Sequence:",sequence
... print
...
Title: Some varying text1
Sequence: AAABBBBBBCCCCCCDDDDDDDEEEEEEEFFFFFFFFGGGGGGGHHHHHHIIIIIJJJJJJJKKKK
Title: Some varying text 2
Sequence: LLLLLMMMMMMNNNNNNNOOOOPPPPPPPQQQQQQRRRRRRSSSTTTTTUUUUUVVVVVVWWWWWW
Some explanation about this regular expression might be useful: ^(.+?)\n\n((?:[A-Z]+\n)+)
The first character (^) means "starting at the beginning of a line". Be aware that it does not match the newline itself (same for $: it means "just before a newline", but it does not match the newline itself).
Then (.+?)\n\n means "match as few characters as possible (all characters are allowed) until you reach two newlines". The result (without the newlines) is put in the first group.
[A-Z]+\n means "match as many upper case letters as possible until you reach a newline. This defines what I will call a textline.
((?:textline)+) means match one or more textlines but do not put each line in a group. Instead, put all the textlines in one group.
You could add a final \n in the regular expression if you want to enforce a double newline at the end.
Also, if you are not sure about what type of newline you will get (\n or \r or \r\n) then just fix the regular expression by replacing every occurrence of \n by (?:\n|\r\n?).

The following is a regular expression matching a multiline block of text:
import re
result = re.findall('(startText)(.+)((?:\n.+)+)(endText)',input)

If each file only has one sequence of aminoacids, I wouldn't use regular expressions at all. Just something like this:
def read_amino_acid_sequence(path):
with open(path) as sequence_file:
title = sequence_file.readline() # read 1st line
aminoacid_sequence = sequence_file.read() # read the rest
# some cleanup, if necessary
title = title.strip() # remove trailing white spaces and newline
aminoacid_sequence = aminoacid_sequence.replace(" ","").replace("\n","")
return title, aminoacid_sequence

find:
^>([^\n\r]+)[\n\r]([A-Z\n\r]+)
\1 = some_varying_text
\2 = lines of all CAPS
Edit (proof that this works):
text = """> some_Varying_TEXT
DSJFKDAFJKDAFJDSAKFJADSFLKDLAFKDSAF
GATACAACATAGGATACA
GGGGGAAAAAAAATTTTTTTTT
CCCCAAAA
> some_Varying_TEXT2
DJASDFHKJFHKSDHF
HHASGDFTERYTERE
GAGAGAGAGAG
PPPPPAAAAAAAAAAAAAAAP
"""
import re
regex = re.compile(r'^>([^\n\r]+)[\n\r]([A-Z\n\r]+)', re.MULTILINE)
matches = [m.groups() for m in regex.finditer(text)]
#NOTE can be sorter with matches = re.findall(pattern, text, re.MULTILINE)
for m in matches:
print 'Name: %s\nSequence:%s' % (m[0], m[1])

It can sometimes be comfortable to specify the flag directly inside the string, as an inline-flag:
"(?m)^A complete line$".
For example in unit tests, with assertRaisesRegex. That way, you don't need to import re, or compile your regex before calling the assert.

My preference.
lineIter= iter(aFile)
for line in lineIter:
if line.startswith( ">" ):
someVaryingText= line
break
assert len( lineIter.next().strip() ) == 0
acids= []
for line in lineIter:
if len(line.strip()) == 0:
break
acids.append( line )
At this point you have someVaryingText as a string, and the acids as a list of strings.
You can do "".join( acids ) to make a single string.
I find this less frustrating (and more flexible) than multiline regexes.

Regular expression for (=string)

I have a text file including thousands of lines. here's an example
line = .Falies/367. 11DG1550/11DG15537.Axiom=nt60
line = .Failies/367. 11DG1550/11DG15537.Axiom=nt50
I tried to extract the string at the end 'nt60', 'nt50'.
lines = line.split('=')
version = lines[-1]
the problem is that the end of line character will be included ('\n')
I thought of using regular expression search to match the string starting from ('=nt')
but I have no idea what shall I use to match a =, word, number.
Can anyone help?

Your first approach is absolutely fine. You can just use the string that you have extracted using your first method and then apply strip() to it:
strip() removes all leading and trailing whitespaces and newlines from a string.
>>> your_str = 'nt60\n'
>>> your_str.strip()
'nt60'
For your case:
lines = line.rsplit('=',1)
version = lines[-1].strip()

The regex to match a = nt then a number is:
=(nt\d+)
And in your example:
line = .Falies/367. 11DG1550/11DG15537.Axiom=nt60
line = .Failies/367. 11DG1550/11DG15537.Axiom=nt50
it will return two matches:
MATCH 1
1. [49-53] `nt60`
MATCH 2
1. [105-109] `nt50`
Explanation:
`=` matches the character `=` literally
1st Capturing group `(nt\d+)`
`nt` matches the characters `nt` literally (case sensitive)
`\d` match a digit `[0-9]`
`+` Quantifier: Between one and unlimited times, as many times as possible,
giving back as needed
if you want your regex to match a = word number then just replace the nt with \w+ to match any word.
hope this helps.