I am trying to install the requirements for odoo15 on my MBP M1 Pro running MacOS Ventura 13.0 in my virtual environment running python 3.10.8
but I keep getting the following error:
build/temp.macosx-12-arm64-cpython-310/_openssl.c:575:10: fatal error: 'openssl/opensslv.h' file not found
#include <openssl/opensslv.h>
^~~~~~~~~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/clang' failed with exit code 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for cryptography
Building wheel for psycopg2 (setup.py) ... error
error: subprocess-exited-with-error
...
ld: warning: directory not found for option '-L/usr/local/opt/openssl/lib'
ld: library not found for -lssl
clang: error: linker command failed with exit code 1 (use -v to see invocation)
error: command '/usr/bin/clang' failed with exit code 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for psycopg2
Running setup.py clean for psycopg2
...
Failed to build cryptography psycopg2
ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects
Now, I have already spent a lot of time researching and it seems that openssl might be the problem here
I have already install openssl via brew, it is running the newest version, as suggested in this GitHub issue
I have installed the newest version of pip as suggested in this StackOverflow post
Edit: I have now also tried setting these flags as suggested in this StackOverflow post:
export LDFLAGS="-L/opt/homebrew/opt/openssl#1.1/lib"
export CPPFLAGS="-I/opt/homebrew/opt/openssl#1.1/include"
I have also retried everything in another venv using Python version 3.8
I am trying to install aerospike in my virtualenv by using below command
pip install aerospike==5.0.0
but it is unable to install. It is throwing below error
Collecting aerospike==5.0.0
Using cached aerospike-5.0.0.tar.gz (182 kB)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: aerospike
Building wheel for aerospike (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [150 lines of output]
info: Executing ./scripts/aerospike-client-c.sh
# ... very long output ... #
ld: warning: directory not found for option '-L/usr/local/opt/openssl#1.1/lib'
ld: warning: directory not found for option '-L/usr/local/opt/openssl/lib'
ld: library not found for -lssl
clang: error: linker command failed with exit code 1 (use -v to see invocation)
error: command 'clang' failed with exit status 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> aerospike
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
I have tried to install wheel and then install this package but it's not working.
I have also tried by installing rosetta2 on mac but it didn't work.
Also, if it requires whole output do let me know where I can share that publish the link here in my question.
I'm trying to install the web3 tester with pip install -U web3[tester] but always getting this error.
Pip and setuptools are both on their current version.
The complete error:
Building wheels for collected packages: blake2b-py
Building wheel for blake2b-py (PEP 517) ... error
ERROR: Command errored out with exit status 1:
command: /Library/Frameworks/Python.framework/Versions/3.9/bin/python3.9 /Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pip/_vendor/pep517/_in_process.py build_wheel /var/folders/rf/h_h1jw411_l1d366hm2pybm00000gn/T/tmpigyl8c27
cwd: /private/var/folders/rf/h_h1jw411_l1d366hm2pybm00000gn/T/pip-install-yu97ljpj/blake2b-py_61e5c1e928bf4c3fa77c17397812b60f
Complete output (20 lines):
Compiling proc-macro2 v1.0.24
Compiling unicode-xid v0.2.1
Compiling syn v1.0.58
Compiling proc-macro-hack v0.5.19
Compiling memchr v2.3.4
Compiling serde_derive v1.0.118
Compiling serde v1.0.118
Compiling ryu v1.0.5
Compiling lazy_static v1.4.0
Compiling serde_json v1.0.61
error: could not compile `ryu`
To learn more, run the command again with --verbose.
warning: build failed, waiting for other jobs to finish...
error: build failed
💥 maturin failed
Caused by: Failed to build a native library through cargo
Caused by: Cargo build finished with "exit code: 101": `cargo rustc --message-format json --manifest-path Cargo.toml --lib --release -- -C link-arg=-undefined -C link-arg=dynamic_lookup`
Running `maturin pep517 build-wheel -i python`
Error: Command '['maturin', 'pep517', 'build-wheel', '-i', 'python']' returned non-zero exit status 1.
----------------------------------------
ERROR: Failed building wheel for blake2b-py
Failed to build blake2b-py
ERROR: Could not build wheels for blake2b-py which use PEP 517 and cannot be installed directly
When I run the command again with --verbose I am getting:
error: failed to run custom build command for `pyo3 v0.8.5`
Caused by:
process didn't exit successfully: `/private/var/folders/rf/h_h1jw411_l1d366hm2pybm00000gn/T/pip-install-ewvt5uxi/blake2b-py_af0db53ab76c4fb48590a7692b7f3b09/target/release/build/pyo3-3ab2c629ff3fb44d/build-script-build` (exit code: 101)
--- stderr
thread 'main' panicked at 'Error: pyo3 requires a nightly or dev version of Rust.', /Users/Pancake/.cargo/registry/src/github.com-1ecc6299db9ec823/pyo3-0.8.5/build.rs:542:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
💥 maturin failed
Caused by: Failed to build a native library through cargo
Caused by: Cargo build finished with "exit code: 101": `cargo rustc --message-format json --manifest-path Cargo.toml --lib --release -- -C link-arg=-undefined -C link-arg=dynamic_lookup`
Running `maturin pep517 build-wheel -i python`
Error: Command '['maturin', 'pep517', 'build-wheel', '-i', 'python']' returned non-zero exit status 1.
Building wheel for blake2b-py (PEP 517) ... error
ERROR: Failed building wheel for blake2b-py
Failed to build blake2b-py
ERROR: Could not build wheels for blake2b-py which use PEP 517 and cannot be installed directly
Exception information:
Traceback (most recent call last):
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pip/_internal/cli/base_command.py", line 224, in _main
status = self.run(options, args)
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pip/_internal/cli/req_command.py", line 180, in wrapper
return func(self, options, args)
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pip/_internal/commands/install.py", line 361, in run
raise InstallationError(
pip._internal.exceptions.InstallationError: Could not build wheels for blake2b-py which use PEP 517 and cannot be installed directly
Removed build tracker: '/private/var/folders/rf/h_h1jw411_l1d366hm2pybm00000gn/T/pip-req-tracker-zvzjdf19'
stderr thread 'main' panicked at 'Error: pyo3 requires a nightly or dev version of Rust.'
You have to install a nightly or dev version of Rust (do you have rust installed at all ?)
EDIT
You can install rust nightly on macOS with following commands in the shell:
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
rustup default nightly
Running:
xcode-select --reset
Did the job for me
Im attempting to install python-saml onto the latest Amazon Linux for Elasticbeanstalk (64bit Amazon Linux 2016.09 v2.3.3 running Python 2.7)
When it attempts to install dm.xmlsec.binding it fails with
Running setup.py (path:/tmp/pip-build-5dg8_B/dm.xmlsec.binding/setup.py) egg_info for package dm.xmlsec.binding
Running command python setup.py egg_info
Complete output from command python setup.py egg_info:
{standard input}: Assembler messages:
{standard input}:26237: Warning: end of file not at end of a line; newline inserted
{standard input}:26953: Error: unknown pseudo-op: `.l'
{standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
gcc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <http://bugzilla.redhat.com/bugzilla> for instructions.
Building lxml version 3.7.3.
Building without Cython.
Using build configuration of libxslt 1.1.28
Building against libxml2/libxslt in the following directory: /usr/lib64
Compile failed: command 'gcc' failed with exit status 1
No issues on Ubuntu 16.04
upgrading lxml fixed the issue
sudo pip install lxml --upgrade
I'm following these instructions for setting up cx_Freeze on Mac OS X in the Terminal: http://martinfitzpatrick.name/article/cx-freeze-and-pyside-on-mac/
When I type: pip install cx_Freeze
I just get a wall of output ending with:
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
error: command 'gcc' failed with exit status 1
Any ideas?