We Keep Coding

Check if sum of subarray is a multiple of target

I encountered this problem, where I have to check if there exists a subarray sum that is a multiple of a target value, and if the length of the subarray is at least 2.
I've looked at one of the solution, which is below
class Solution():
def checkSubarraySum(self, nums, k):
"""
:type nums: List[int]
:type k: int
:rtype: bool
"""
dic = {0:-1}
summ = 0
for i, n in enumerate(nums):
if k != 0:
summ = (summ + n) % k
else:
summ += n
if summ not in dic:
dic[summ] = i
else:
if i - dic[summ] >= 2:
return True
return False
What I don't understand is why it is "i - dic[summ] >= 2" instead of greater or equal to 1? I assume it is checking whether the length is greater than 2, so wouldn't the difference of two indexes plus one be the length of the subarray?

Since all the elements in nums are either 0 or positive, the condition summ in dic (else of summ not in dic) and i - dic[summ] >= 2 only satisfy when the line summ = (summ + n) % k is run in the same iteration. The reason we need to check why it's >=2 and not >=1 is because the index in dic[summ] is not included in the subarray so i - dic[summ] is to check if the size of the continuous subarray is at least 2

Returning smallest positive int that does not occur in given list

Write a function that given an array of A of N int, returns the smallest positive(greater than 0) that does not occur in A.
I decided to approach this problem by iterating through the list after sorting it.
The value of the current element would be compared to the value of the next element. Because the list is sorted, the list should follow sequentially until the end.
However, if there is a skipped number this indicates the smallest number that does not occur in the list.
And if it follows through until the end, then you should just add one to the value of the last element.
def test():
arr = [23,26,25,24,28]
arr.sort()
l = len(arr)
if arr[-1] <= 0:
return 1
for i in range(0,l):
for j in range(1,l):
cur_val = arr[i]
next_val = arr[j]
num = cur_val + 1
if num != next_val:
return num
if num == next_val: //if completes the list with no skips
return arr[j] + 1
print(test())

I suggest that you convert to a set, and you can then efficiently test whether numbers are members of it:
def first_int_not_in_list(lst, starting_value=1):
s = set(lst)
i = starting_value
while i in s:
i += 1
return i
arr = [23,26,25,24,28]
print(first_int_not_in_list(arr)) # prints 1

You can do the following:
def minint(arr):
s=set(range(min(arr),max(arr)))-set(arr)
if len(s)>0:
return min(set(range(min(arr),max(arr)))-set(arr)) #the common case
elif 1 in arr:
return max(arr)+1 #arr is a complete range with no blanks
else:
return 1 #arr is negative numbers only

You can make use of sets to achieve your goal.
set.difference() method is same as relative complement denoted by A – B, is the set of all elements in A that are not in B.
Example:
Let A = {1, 3, 5} and B = {1, 2, 3, 4, 5, 6}. Then A - B = {2, 4, 6}.
Using isNeg() method is used to check whether given set contains any negative integer.
Using min() method on A - B returns the minimum value from set difference.
Here's the code snippet
def retMin(arrList):
min_val = min(arrList) if isNeg(arrList) else 1
seqList=list(range((min_val),abs(max(arrList))+2))
return min(list(set(seqList).difference(arrList)))
def isNeg(arr):
return(all (x > 0 for x in arr))
Input:
print(retMin([1,3,6,4,1,2]))
Output:
5
Input:
print(retMin([-2,-6,-7]))
Output:
1
Input:
print(retMin([23,25,26,28,30]))
Output:
24

Try with the following code and you should be able to solve your problem:
def test():
arr = [3,-1,23,26,25,24,28]
min_val = min(val for val in arr if val > 0)
arr.sort()
l = len(arr)
if arr[-1] <= 0:
return 1
for i in range(0,l):
if arr[i] > 0 and arr[i] <= min_val:
min_val = arr[i] + 1
return min_val
print(test())
EDIT
It seems you're searching for the the value grater than the minimum positive integer in tha array not sequentially.
The code it's just the same as before I only change min_val = 1 to:
min_val = min(val for val in arr if val > 0), so I'm using a lambda expression to get all the positive value of the array and after getting them, using the min function, I'll get the minimum of those.
You can test it here if you want

How to apply recursion to this code about the number of ways to sum up to 'N'?

Given a list of integers, and a target integer N, I want to find the number of ways in which the integers in the list can be added to get N. Repetition is allowed.
This is the code:
def countWays(arr, m, N):
count = [0 for i in range(N + 1)]
# base case
count[0] = 1
# Count ways for all values up
# to 'N' and store the result
# m=len(arr)
for i in range(1, N + 1):
for j in range(m):
# if i >= arr[j] then
# accumulate count for value 'i' as
# ways to form value 'i-arr[j]'
if (i >= arr[j]):
count[i] += count[i - arr[j]]
# required number of ways
return count[N]
(from Geeksforgeeks)
Any idea on how to do it using recursion and memoization?

The problem you are trying to solve is the same as the number of ways to make a change for an amount given a list of denominations. In your case, the amount is analogous to target number N and the denominations are analogous to the list of integers. Here is the recursive code. The link is https://www.geeksforgeeks.org/coin-change-dp-7/
# Returns the count of ways we can sum
# arr[0...m-1] coins to get sum N
def count(arr, m, N ):
# If N is 0 then there is 1
# solution (do not include any coin)
if (N == 0):
return 1
# If N is less than 0 then no
# solution exists
if (N < 0):
return 0;
# If there are no coins and N
# is greater than 0, then no
# solution exist
if (m <=0 and N >= 1):
return 0
# count is sum of solutions (i)
# including arr[m-1] (ii) excluding arr[m-1]
return count( arr, m - 1, N ) + count( arr, m, N-arr[m-1] );

Python: Dynamic array classes. Working with negative indices but not sure how to start this.

Using dynamic arrays, I'm trying to modify the getitem method to accept negative indexes but right now, it only accepts positive ones.
This is what I have so far:
def __getitem__(self, k):
"""Return element at index k."""
if not 0 <= k < self._n:
raise IndexError('Invalid index.')
return self._A[k]
I really just don't how to start it. Any help is appreciated.

First test if k is within the range positive range from [0,n), if so return the element using k as the index. If k is negative then add k to n. But first check if k is within the range (-n,0], since n+k for -k < -n will result in a negative index. Adding k to n will index k elements from n towards zero.
def __getitem__(self, k):
"""Return element at index k."""
if k >= 0 and k < self._n:
return self._A[k]
else k < 0 and self._n+k >= 0:
return self._A[self._n+k]
raise IndexError('Invalid index.')

Finding all possible permutations of a given string in python

I have a string. I want to generate all permutations from that string, by changing the order of characters in it. For example, say:
x='stack'
what I want is a list like this,
l=['stack','satck','sackt'.......]
Currently I am iterating on the list cast of the string, picking 2 letters randomly and transposing them to form a new string, and adding it to set cast of l. Based on the length of the string, I am calculating the number of permutations possible and continuing iterations till set size reaches the limit.
There must be a better way to do this.

The itertools module has a useful method called permutations(). The documentation says:
itertools.permutations(iterable[, r])
Return successive r length permutations of elements in the iterable.
If r is not specified or is None, then r defaults to the length of the
iterable and all possible full-length permutations are generated.
Permutations are emitted in lexicographic sort order. So, if the input
iterable is sorted, the permutation tuples will be produced in sorted
order.
You'll have to join your permuted letters as strings though.
>>> from itertools import permutations
>>> perms = [''.join(p) for p in permutations('stack')]
>>> perms
['stack', 'stakc', 'stcak', 'stcka', 'stkac', 'stkca', 'satck',
'satkc', 'sactk', 'sackt', 'saktc', 'sakct', 'sctak', 'sctka',
'scatk', 'scakt', 'sckta', 'sckat', 'sktac', 'sktca', 'skatc',
'skact', 'skcta', 'skcat', 'tsack', 'tsakc', 'tscak', 'tscka',
'tskac', 'tskca', 'tasck', 'taskc', 'tacsk', 'tacks', 'taksc',
'takcs', 'tcsak', 'tcska', 'tcask', 'tcaks', 'tcksa', 'tckas',
'tksac', 'tksca', 'tkasc', 'tkacs', 'tkcsa', 'tkcas', 'astck',
'astkc', 'asctk', 'asckt', 'asktc', 'askct', 'atsck', 'atskc',
'atcsk', 'atcks', 'atksc', 'atkcs', 'acstk', 'acskt', 'actsk',
'actks', 'ackst', 'ackts', 'akstc', 'aksct', 'aktsc', 'aktcs',
'akcst', 'akcts', 'cstak', 'cstka', 'csatk', 'csakt', 'cskta',
'cskat', 'ctsak', 'ctska', 'ctask', 'ctaks', 'ctksa', 'ctkas',
'castk', 'caskt', 'catsk', 'catks', 'cakst', 'cakts', 'cksta',
'cksat', 'cktsa', 'cktas', 'ckast', 'ckats', 'kstac', 'kstca',
'ksatc', 'ksact', 'kscta', 'kscat', 'ktsac', 'ktsca', 'ktasc',
'ktacs', 'ktcsa', 'ktcas', 'kastc', 'kasct', 'katsc', 'katcs',
'kacst', 'kacts', 'kcsta', 'kcsat', 'kctsa', 'kctas', 'kcast',
'kcats']
If you find yourself troubled by duplicates, try fitting your data into a structure with no duplicates like a set:
>>> perms = [''.join(p) for p in permutations('stacks')]
>>> len(perms)
720
>>> len(set(perms))
360
Thanks to #pst for pointing out that this is not what we'd traditionally think of as a type cast, but more of a call to the set() constructor.

You can get all N! permutations without much code
def permutations(string, step = 0):
# if we've gotten to the end, print the permutation
if step == len(string):
print "".join(string)
# everything to the right of step has not been swapped yet
for i in range(step, len(string)):
# copy the string (store as array)
string_copy = [character for character in string]
# swap the current index with the step
string_copy[step], string_copy[i] = string_copy[i], string_copy[step]
# recurse on the portion of the string that has not been swapped yet (now it's index will begin with step + 1)
permutations(string_copy, step + 1)

Here is another way of doing the permutation of string with minimal code based on bactracking.
We basically create a loop and then we keep swapping two characters at a time,
Inside the loop we'll have the recursion. Notice,we only print when indexers reaches the length of our string.
Example:
ABC
i for our starting point and our recursion param
j for our loop
here is a visual help how it works from left to right top to bottom (is the order of permutation)
the code :
def permute(data, i, length):
if i==length:
print(''.join(data) )
else:
for j in range(i,length):
#swap
data[i], data[j] = data[j], data[i]
permute(data, i+1, length)
data[i], data[j] = data[j], data[i]
string = "ABC"
n = len(string)
data = list(string)
permute(data, 0, n)

Stack Overflow users have already posted some strong solutions but I wanted to show yet another solution. This one I find to be more intuitive
The idea is that for a given string: we can recurse by the algorithm (pseudo-code):
permutations = char + permutations(string - char) for char in string
I hope it helps someone!
def permutations(string):
"""
Create all permutations of a string with non-repeating characters
"""
permutation_list = []
if len(string) == 1:
return [string]
else:
for char in string:
[permutation_list.append(char + a) for a in permutations(string.replace(char, "", 1))]
return permutation_list

Here's a simple function to return unique permutations:
def permutations(string):
if len(string) == 1:
return string
recursive_perms = []
for c in string:
for perm in permutations(string.replace(c,'',1)):
recursive_perms.append(c+perm)
return set(recursive_perms)

itertools.permutations is good, but it doesn't deal nicely with sequences that contain repeated elements. That's because internally it permutes the sequence indices and is oblivious to the sequence item values.
Sure, it's possible to filter the output of itertools.permutations through a set to eliminate the duplicates, but it still wastes time generating those duplicates, and if there are several repeated elements in the base sequence there will be lots of duplicates. Also, using a collection to hold the results wastes RAM, negating the benefit of using an iterator in the first place.
Fortunately, there are more efficient approaches. The code below uses the algorithm of the 14th century Indian mathematician Narayana Pandita, which can be found in the Wikipedia article on Permutation. This ancient algorithm is still one of the fastest known ways to generate permutations in order, and it is quite robust, in that it properly handles permutations that contain repeated elements.
def lexico_permute_string(s):
''' Generate all permutations in lexicographic order of string `s`
This algorithm, due to Narayana Pandita, is from
https://en.wikipedia.org/wiki/Permutation#Generation_in_lexicographic_order
To produce the next permutation in lexicographic order of sequence `a`
1. Find the largest index j such that a[j] < a[j + 1]. If no such index exists,
the permutation is the last permutation.
2. Find the largest index k greater than j such that a[j] < a[k].
3. Swap the value of a[j] with that of a[k].
4. Reverse the sequence from a[j + 1] up to and including the final element a[n].
'''
a = sorted(s)
n = len(a) - 1
while True:
yield ''.join(a)
#1. Find the largest index j such that a[j] < a[j + 1]
for j in range(n-1, -1, -1):
if a[j] < a[j + 1]:
break
else:
return
#2. Find the largest index k greater than j such that a[j] < a[k]
v = a[j]
for k in range(n, j, -1):
if v < a[k]:
break
#3. Swap the value of a[j] with that of a[k].
a[j], a[k] = a[k], a[j]
#4. Reverse the tail of the sequence
a[j+1:] = a[j+1:][::-1]
for s in lexico_permute_string('data'):
print(s)
output
aadt
aatd
adat
adta
atad
atda
daat
data
dtaa
taad
tada
tdaa
Of course, if you want to collect the yielded strings into a list you can do
list(lexico_permute_string('data'))
or in recent Python versions:
[*lexico_permute_string('data')]

Here is another approach different from what #Adriano and #illerucis posted. This has a better runtime, you can check that yourself by measuring the time:
def removeCharFromStr(str, index):
endIndex = index if index == len(str) else index + 1
return str[:index] + str[endIndex:]
# 'ab' -> a + 'b', b + 'a'
# 'abc' -> a + bc, b + ac, c + ab
# a + cb, b + ca, c + ba
def perm(str):
if len(str) <= 1:
return {str}
permSet = set()
for i, c in enumerate(str):
newStr = removeCharFromStr(str, i)
retSet = perm(newStr)
for elem in retSet:
permSet.add(c + elem)
return permSet
For an arbitrary string "dadffddxcf" it took 1.1336 sec for the permutation library, 9.125 sec for this implementation and 16.357 secs for #Adriano's and #illerucis' version. Of course you can still optimize it.

Here's a slightly improved version of illerucis's code for returning a list of all permutations of a string s with distinct characters (not necessarily in lexicographic sort order), without using itertools:
def get_perms(s, i=0):
"""
Returns a list of all (len(s) - i)! permutations t of s where t[:i] = s[:i].
"""
# To avoid memory allocations for intermediate strings, use a list of chars.
if isinstance(s, str):
s = list(s)
# Base Case: 0! = 1! = 1.
# Store the only permutation as an immutable string, not a mutable list.
if i >= len(s) - 1:
return ["".join(s)]
# Inductive Step: (len(s) - i)! = (len(s) - i) * (len(s) - i - 1)!
# Swap in each suffix character to be at the beginning of the suffix.
perms = get_perms(s, i + 1)
for j in range(i + 1, len(s)):
s[i], s[j] = s[j], s[i]
perms.extend(get_perms(s, i + 1))
s[i], s[j] = s[j], s[i]
return perms

See itertools.combinations or itertools.permutations.

why do you not simple do:
from itertools import permutations
perms = [''.join(p) for p in permutations(['s','t','a','c','k'])]
print perms
print len(perms)
print len(set(perms))
you get no duplicate as you can see :
['stack', 'stakc', 'stcak', 'stcka', 'stkac', 'stkca', 'satck', 'satkc',
'sactk', 'sackt', 'saktc', 'sakct', 'sctak', 'sctka', 'scatk', 'scakt', 'sckta',
'sckat', 'sktac', 'sktca', 'skatc', 'skact', 'skcta', 'skcat', 'tsack',
'tsakc', 'tscak', 'tscka', 'tskac', 'tskca', 'tasck', 'taskc', 'tacsk', 'tacks',
'taksc', 'takcs', 'tcsak', 'tcska', 'tcask', 'tcaks', 'tcksa', 'tckas', 'tksac',
'tksca', 'tkasc', 'tkacs', 'tkcsa', 'tkcas', 'astck', 'astkc', 'asctk', 'asckt',
'asktc', 'askct', 'atsck', 'atskc', 'atcsk', 'atcks', 'atksc', 'atkcs', 'acstk',
'acskt', 'actsk', 'actks', 'ackst', 'ackts', 'akstc', 'aksct', 'aktsc', 'aktcs',
'akcst', 'akcts', 'cstak', 'cstka', 'csatk', 'csakt', 'cskta', 'cskat', 'ctsak',
'ctska', 'ctask', 'ctaks', 'ctksa', 'ctkas', 'castk', 'caskt', 'catsk', 'catks',
'cakst', 'cakts', 'cksta', 'cksat', 'cktsa', 'cktas', 'ckast', 'ckats', 'kstac',
'kstca', 'ksatc', 'ksact', 'kscta', 'kscat', 'ktsac', 'ktsca', 'ktasc', 'ktacs',
'ktcsa', 'ktcas', 'kastc', 'kasct', 'katsc', 'katcs', 'kacst', 'kacts', 'kcsta',
'kcsat', 'kctsa', 'kctas', 'kcast', 'kcats']
120
120
[Finished in 0.3s]

def permute(seq):
if not seq:
yield seq
else:
for i in range(len(seq)):
rest = seq[:i]+seq[i+1:]
for x in permute(rest):
yield seq[i:i+1]+x
print(list(permute('stack')))

All Possible Word with stack
from itertools import permutations
for i in permutations('stack'):
print(''.join(i))
permutations(iterable, r=None)
Return successive r length permutations of elements in the iterable.
If r is not specified or is None, then r defaults to the length of the iterable and all possible full-length permutations are generated.
Permutations are emitted in lexicographic sort order. So, if the input iterable is sorted, the permutation tuples will be produced in sorted order.
Elements are treated as unique based on their position, not on their value. So if the input elements are unique, there will be no repeat values in each permutation.

This is a recursive solution with n! which accepts duplicate elements in the string
import math
def getFactors(root,num):
sol = []
# return condition
if len(num) == 1:
return [root+num]
# looping in next iteration
for i in range(len(num)):
# Creating a substring with all remaining char but the taken in this iteration
if i > 0:
rem = num[:i]+num[i+1:]
else:
rem = num[i+1:]
# Concatenating existing solutions with the solution of this iteration
sol = sol + getFactors(root + num[i], rem)
return sol
I validated the solution taking into account two elements, the number of combinations is n! and the result can not contain duplicates. So:
inpt = "1234"
results = getFactors("",inpt)
if len(results) == math.factorial(len(inpt)) | len(results) != len(set(results)):
print("Wrong approach")
else:
print("Correct Approach")

With recursive approach.
def permute(word):
if len(word) == 1:
return [word]
permutations = permute(word[1:])
character = word[0]
result = []
for p in permutations:
for i in range(len(p)+1):
result.append(p[:i] + character + p[i:])
return result
running code.
>>> permute('abc')
['abc', 'bac', 'bca', 'acb', 'cab', 'cba']

Yet another initiative and recursive solution. The idea is to select a letter as a pivot and then create a word.
def find_premutations(alphabet):
words = []
word =''
def premute(new_word, alphabet):
if not alphabet:
words.append(word)
else:
for i in range(len(alphabet)):
premute(new_word=word + alphabet[i], alphabet=alphabet[0:i] + alphabet[i+1:])
premute(word, alphabet)
return words
# let us try it with 'abc'
a = 'abc'
find_premutations(a)
Output:
abc
acb
bac
bca
cab
cba

Here's a really simple generator version:
def find_all_permutations(s, curr=[]):
if len(s) == 0:
yield curr
else:
for i, c in enumerate(s):
for combo in find_all_permutations(s[:i]+s[i+1:], curr + [c]):
yield "".join(combo)
I think it's not so bad!

def f(s):
if len(s) == 2:
X = [s, (s[1] + s[0])]
return X
else:
list1 = []
for i in range(0, len(s)):
Y = f(s[0:i] + s[i+1: len(s)])
for j in Y:
list1.append(s[i] + j)
return list1
s = raw_input()
z = f(s)
print z

Here's a simple and straightforward recursive implementation;
def stringPermutations(s):
if len(s) < 2:
yield s
return
for pos in range(0, len(s)):
char = s[pos]
permForRemaining = list(stringPermutations(s[0:pos] + s[pos+1:]))
for perm in permForRemaining:
yield char + perm

from itertools import permutations
perms = [''.join(p) for p in permutations('ABC')]
perms = [''.join(p) for p in permutations('stack')]

def perm(string):
res=[]
for j in range(0,len(string)):
if(len(string)>1):
for i in perm(string[1:]):
res.append(string[0]+i)
else:
return [string];
string=string[1:]+string[0];
return res;
l=set(perm("abcde"))
This is one way to generate permutations with recursion, you can understand the code easily by taking strings 'a','ab' & 'abc' as input.
You get all N! permutations with this, without duplicates.

Everyone loves the smell of their own code. Just sharing the one I find the simplest:
def get_permutations(word):
if len(word) == 1:
yield word
for i, letter in enumerate(word):
for perm in get_permutations(word[:i] + word[i+1:]):
yield letter + perm

This program does not eliminate the duplicates, but I think it is one of the most efficient approaches:
s=raw_input("Enter a string: ")
print "Permutations :\n",s
size=len(s)
lis=list(range(0,size))
while(True):
k=-1
while(k>-size and lis[k-1]>lis[k]):
k-=1
if k>-size:
p=sorted(lis[k-1:])
e=p[p.index(lis[k-1])+1]
lis.insert(k-1,'A')
lis.remove(e)
lis[lis.index('A')]=e
lis[k:]=sorted(lis[k:])
list2=[]
for k in lis:
list2.append(s[k])
print "".join(list2)
else:
break

With Recursion
# swap ith and jth character of string
def swap(s, i, j):
q = list(s)
q[i], q[j] = q[j], q[i]
return ''.join(q)
# recursive function
def _permute(p, s, permutes):
if p >= len(s) - 1:
permutes.append(s)
return
for i in range(p, len(s)):
_permute(p + 1, swap(s, p, i), permutes)
# helper function
def permute(s):
permutes = []
_permute(0, s, permutes)
return permutes
# TEST IT
s = "1234"
all_permute = permute(s)
print(all_permute)
With Iterative approach (Using Stack)
# swap ith and jth character of string
def swap(s, i, j):
q = list(s)
q[i], q[j] = q[j], q[i]
return ''.join(q)
# iterative function
def permute_using_stack(s):
stk = [(0, s)]
permutes = []
while len(stk) > 0:
p, s = stk.pop(0)
if p >= len(s) - 1:
permutes.append(s)
continue
for i in range(p, len(s)):
stk.append((p + 1, swap(s, p, i)))
return permutes
# TEST IT
s = "1234"
all_permute = permute_using_stack(s)
print(all_permute)
With Lexicographically sorted
# swap ith and jth character of string
def swap(s, i, j):
q = list(s)
q[i], q[j] = q[j], q[i]
return ''.join(q)
# finds next lexicographic string if exist otherwise returns -1
def next_lexicographical(s):
for i in range(len(s) - 2, -1, -1):
if s[i] < s[i + 1]:
m = s[i + 1]
swap_pos = i + 1
for j in range(i + 1, len(s)):
if m > s[j] > s[i]:
m = s[j]
swap_pos = j
if swap_pos != -1:
s = swap(s, i, swap_pos)
s = s[:i + 1] + ''.join(sorted(s[i + 1:]))
return s
return -1
# helper function
def permute_lexicographically(s):
s = ''.join(sorted(s))
permutes = []
while True:
permutes.append(s)
s = next_lexicographical(s)
if s == -1:
break
return permutes
# TEST IT
s = "1234"
all_permute = permute_lexicographically(s)
print(all_permute)

This code makes sense to me. The logic is to loop through all characters, extract the ith character, perform the permutation on the other elements and append the ith character at the beginning.
If i'm asked to get all permutations manually for string ABC. I would start by checking all combinations of element A:
A AB
A BC
Then all combinations of element B:
B AC
B CA
Then all combinations of element C:
C AB
C BA
def permute(s: str):
n = len(s)
if n == 1: return [s]
if n == 2:
return [s[0]+s[1], s[1]+s[0]]
permutations = []
for i in range(0, n):
current = s[i]
others = s[:i] + s[i+1:]
otherPermutations = permute(others)
for op in otherPermutations:
permutations.append(current + op)
return permutations

Simpler solution using permutations.
from itertools import permutations
def stringPermutate(s1):
length=len(s1)
if length < 2:
return s1
perm = [''.join(p) for p in permutations(s1)]
return set(perm)

def permute_all_chars(list, begin, end):
if (begin == end):
print(list)
return
for current_position in range(begin, end + 1):
list[begin], list[current_position] = list[current_position], list[begin]
permute_all_chars(list, begin + 1, end)
list[begin], list[current_position] = list[current_position], list[begin]
given_str = 'ABC'
list = []
for char in given_str:
list.append(char)
permute_all_chars(list, 0, len(list) -1)

The itertools module in the standard library has a function for this which is simply called permutations.
import itertools
def minion_game(s):
vow ="aeiou"
lsword=[]
ta=[]
for a in range(1,len(s)+1):
t=list(itertools.permutations(s,a))
lsword.append(t)
for i in range(0,len(lsword)):
for xa in lsword[i]:
if vow.startswith(xa):
ta.append("".join(xa))
print(ta)
minion_game("banana")