How can i get word example from such string:
str = "http://test-example:123/wd/hub"
I write something like that
print(str[10:str.rfind(':')])
but it doesn't work right, if string will be like
"http://tests-example:123/wd/hub"
You can use this regex to capture the value preceded by - and followed by : using lookarounds
(?<=-).+(?=:)
Regex Demo
Python code,
import re
str = "http://test-example:123/wd/hub"
print(re.search(r'(?<=-).+(?=:)', str).group())
Outputs,
example
Non-regex way to get the same is using these two splits,
str = "http://test-example:123/wd/hub"
print(str.split(':')[1].split('-')[1])
Prints,
example
You can use following non-regex because you know example is a 7 letter word:
s.split('-')[1][:7]
For any arbitrary word, that would change to:
s.split('-')[1].split(':')[0]
many ways
using splitting:
example_str = str.split('-')[-1].split(':')[0]
This is fragile, and could break if there are more hyphens or colons in the string.
using regex:
import re
pattern = re.compile(r'-(.*):')
example_str = pattern.search(str).group(1)
This still expects a particular format, but is more easily adaptable (if you know how to write regexes).
I am not sure why do you want to get a particular word from a string. I guess you wanted to see if this word is available in given string.
if that is the case, below code can be used.
import re
str1 = "http://tests-example:123/wd/hub"
matched = re.findall('example',str1)
Split on the -, and then on :
s = "http://test-example:123/wd/hub"
print(s.split('-')[1].split(':')[0])
#example
using re
import re
text = "http://test-example:123/wd/hub"
m = re.search('(?<=-).+(?=:)', text)
if m:
print(m.group())
Python strings has built-in function find:
a="http://test-example:123/wd/hub"
b="http://test-exaaaample:123/wd/hub"
print(a.find('example'))
print(b.find('example'))
will return:
12
-1
It is the index of found substring. If it equals to -1, the substring is not found in string. You can also use in keyword:
'example' in 'http://test-example:123/wd/hub'
True
Related
Using regex, how can i split a string and keep it's deliminators in the returned results? I'm trying to split a string containing numbers and strings by a set of letters followed by any numerical value including '.' however it's not appearing to work correctly.
Below is my test string, im using python 2.7 and it's not producing what id expect.
s = 'M160.394,83.962L121.5,52L86.31,73.378L58,104.917L89.75,C136.667L158.542,136.667L185,110.208L160.394,83.962Z'
parts = filter(None, re.split('([MLHVCSQTAZ][^MLHVCSQTAZ]+)', s, re.IGNORECASE))
print len(parts), parts
>>> 3 ['M160.394,83.962', 'L121.5,52', 'L86.31,73.378L58,104.917L89.75,C136.667L158.542,136.667L185,110.208L160.394,83.962Z']
I would expect it to give me this
>>> 10 ['M160.394,83.962', 'L121.5,52', 'L86.31,73.378', 'L58,104.917', 'L89.75,', 'C136.667', 'L158.542,136.667', 'L185,110.208', 'L160.394,83.962', 'Z']
It should output a list of strings where each string starts with a letter, found in the original regex MLHVCSQTAZ
In your code you are passing re.IGNORECASE as 3rd argument to re.split but 3rd argument of re.split is maxsplit not flags.
re.IGNORECASE equals to 2 hence your input is split only two times.
You may use:
>>> list(filter(None, re.split(r'([MLHVCSQTAZ][^MLHVCSQTAZ]+)', s, 0, re.I)))
['M160.394,83.962', 'L121.5,52', 'L86.31,73.378', 'L58,104.917', 'L89.75,', 'C136.667', 'L158.542,136.667', 'L185,110.208', 'L160.394,83.962', 'Z']
Or use inline mode for ignore case:
re.split(r'(?i)([MLHVCSQTAZ][^MLHVCSQTAZ]+)', s)
I suggest using this simple re.findall code that uses almost identical regex:
parts = re.findall('(?i)[MLHVCSQTAZ][^MLHVCSQTAZ]*', s)
Reference: SRE_FLAG_IGNORECASE = 2 in lib/python2.7/sre_constants.py (thanks to comment from #vks)
You can use re.findall:
import re
s = 'M160.394,83.962L121.5,52L86.31,73.378L58,104.917L89.75,C136.667L158.542,136.667L185,110.208L160.394,83.962Z'
result = re.findall('[A-Z][\.\d,]+|[A-Z]', s)
Output:
['M160.394,83.962', 'L121.5,52', 'L86.31,73.378', 'L58,104.917', 'L89.75,', 'C136.667', 'L158.542,136.667', 'L185,110.208', 'L160.394,83.962', 'Z']
parts = filter(None, re.split('([MLHVCSQTAZ][^MLHVCSQTAZ]+)', s, flags=re.IGNORECASE))
You need to use flags.Check re.split function definition.
Default re does not support 0 width assertion split.So you can also use regex module for that.
import regex
s = 'M160.394,83.962L121.5,52L86.31,73.378L58,104.917L89.75,C136.667L158.542,136.667L185,110.208L160.394,83.962Z'
print regex.split('(?=[MLHVCSQTAZ][^MLHVCSQTAZ])', s, flags=regex.IGNORECASE|regex.VERSION1)
I have some sample strings:
s = 'neg(able-23, never-21) s2-1/3'
i = 'amod(Market-8, magical-5) s1'
I've got the problem where I can figure out if the string has 's1' or 's3' using:
word = re.search(r's\d$', s)
But if I want to know if the contains 's2-1/3' in it, it won't work.
Is there a regex expression that can be used so that it works for both cases of 's#' and 's#+?
Thanks!
You can allow the characters "-" and "/" to be captured as well, in addition to just digits. It's hard to tell the exact pattern you're going for here, but something like this would capture "s2-1/3" from your example:
import re
s = "neg(able-23, never-21) s2-1/3"
word = re.search(r"s\d[-/\d]*$", s)
I'm guessing that maybe you would want to extract that with some expression, such as:
(s\d+)-?(.*)$
Demo 1
or:
(s\d+)-?([0-9]+)?\/?([0-9]+)?$
Demo 2
Test
import re
expression = r"(s\d+)-?(.*)$"
string = """
neg(able-23, never-21) s211-12/31
neg(able-23, never-21) s2-1/3
amod(Market-8, magical-5) s1
"""
print(re.findall(expression, string, re.M))
Output
[('s211', '12/31'), ('s2', '1/3'), ('s1', '')]
As title says string is '="24digit number"' and I want to extract number between "" (example: ="000021484123647598423458" should get me '000021484123647598423458').
There are answers that answer how to get data between " but in my case I also need to confirm that =" exist without capturing (there are also other "\d{24}" strings, but they are for other stuff) it.
I couldn't modify these answers to get what I need.
My latest regex was ((?<=\")\d{24}(?=\")) and string is ="000021484123647598423458".
UPDATE: I think I will settle with pattern r'^(?:\=\")(\d{24})(?:\")' because I just want to capture digit characters.
word = '="000021484123647598423458"'
pattern = r'^(?:\=\")(\d{24})(?:\")'
match = re.findall(pattern, word)[0]
Thank you all for suggestions.
You could have it like:
=(['"])(\d{24})\1
See a demo on regex101.com.
In Python:
import re
string = '="000021484123647598423458"'
rx = re.compile(r'''=(['"])(\d{24})\1''')
print(rx.search(string).group(2))
# 000021484123647598423458
Any one of the following works:
>>> st = '="000021484123647598423458"'
>>> import re
>>> re.findall(r'".*\d+.*"',st)
['"000021484123647598423458"']
or
>>> re.findall(r'".*\d{24}.*"',st)
['"000021484123647598423458"']
or
>>> re.findall(r'"\d{24}"',st)
['"000021484123647598423458"']
First of all, sorry if the title isn't very explicit, it's hard for me to formulate it properly. That's also why I haven't found if the question has already been asked, if it has.
So, I have a list of string, and I want to perform a "procedural" search replacing every * in my target-substring by any possible substring.
Here is an example:
strList = ['obj_1_mesh',
'obj_2_mesh',
'obj_TMP',
'mesh_1_TMP',
'mesh_2_TMP',
'meshTMP']
searchFor('mesh_*')
# should return: ['mesh_1_TMP', 'mesh_2_TMP']
In this case where there is just one * I just split each string with * and use startswith() and/or endswith(), so that's ok.
But I don't know how to do the same thing if there are multiple * in the search string.
So my question is, how do I search for any number of unknown substrings in place of * in a list of string?
For example:
strList = ['obj_1_mesh',
'obj_2_mesh',
'obj_TMP',
'mesh_1_TMP',
'mesh_2_TMP',
'meshTMP']
searchFor('*_1_*')
# should return: ['obj_1_mesh', 'mesh_1_TMP']
Hope everything is clear enough. Thanks.
Consider using 'fnmatch' which provides Unix-like file pattern matching. More info here http://docs.python.org/2/library/fnmatch.html
from fnmatch import fnmatch
strList = ['obj_1_mesh',
'obj_2_mesh',
'obj_TMP',
'mesh_1_TMP',
'mesh_2_TMP',
'meshTMP']
searchFor = '*_1_*'
resultSubList = [ strList[i] for i,x in enumerate(strList) if fnmatch(x,searchFor) ]
This should do the trick
I would use the regular expression package for this if I were you. You'll have to learn a little bit of regex to make correct search queries, but it's not too bad. '.+' is pretty similar to '*' in this case.
import re
def search_strings(str_list, search_query):
regex = re.compile(search_query)
result = []
for string in str_list:
match = regex.match(string)
if match is not None:
result+=[match.group()]
return result
strList= ['obj_1_mesh',
'obj_2_mesh',
'obj_TMP',
'mesh_1_TMP',
'mesh_2_TMP',
'meshTMP']
print search_strings(strList, '.+_1_.+')
This should return ['obj_1_mesh', 'mesh_1_TMP']. I tried to replicate the '*_1_*' case. For 'mesh_*' you could make the search_query 'mesh_.+'. Here is the link to the python regex api: https://docs.python.org/2/library/re.html
The simplest way to do this is to use fnmatch, as shown in ma3oun's answer. But here's a way to do it using Regular Expressions, aka regex.
First we transform your searchFor pattern so it uses '.+?' as the "wildcard" instead of '*'. Then we compile the result into a regex pattern object so we can efficiently use it multiple tests.
For an explanation of regex syntax, please see the docs. But briefly, the dot means any character (on this line), the + means look for one or more of them, and the ? means do non-greedy matching, i.e., match the smallest string that conforms to the pattern rather than the longest, (which is what greedy matching does).
import re
strList = ['obj_1_mesh',
'obj_2_mesh',
'obj_TMP',
'mesh_1_TMP',
'mesh_2_TMP',
'meshTMP']
searchFor = '*_1_*'
pat = re.compile(searchFor.replace('*', '.+?'))
result = [s for s in strList if pat.match(s)]
print(result)
output
['obj_1_mesh', 'mesh_1_TMP']
If we use searchFor = 'mesh_*' the result is
['mesh_1_TMP', 'mesh_2_TMP']
Please note that this solution is not robust. If searchFor contains other characters that have special meaning in a regex they need to be escaped. Actually, rather than doing that searchFor.replace transformation, it would be cleaner to just write the pattern using regex syntax in the first place.
If the string you are looking for looks always like string you can just use the find function, you'll get something like:
for s in strList:
if s.find(searchFor) != -1:
do_something()
If you have more than one string to look for (like abc*123*test) you gonna need to look for the each string, find the second one in the same string starting at the index you found the first + it's len and so on.
I have a string in which there are some attributes that may be empty:
[attribute1=value1, attribute2=, attribute3=value3, attribute4=]
With python I need to sobstitute the empty values with the value 'None'. I know I can use the string.replace('=,','=None,').replace('=]','=None]') for the string but I'm wondering if there is a way to do it using a regex, maybe with the ?P<name> option.
You can use
import re
s = '[attribute1=value1, attribute2=, attribute3=value3, attribute4=]'
re.sub(r'=(,|])', r'=None\1', s)
\1 is the match in parenthesis.
With python's re module, you can do something like this:
# import it first
import re
# your code
re.sub(r'=([,\]])', '=None\1', your_string)
You can use
s = '[attribute1=value1, attribute2=, attribute3=value3, attribute4=]'
re.sub(r'=(?!\w)', r'=None', s)
This works because the negative lookahead (?!\w) checks if the = character is not followed by a 'word' character. The definition of "word character", in regular expressions, is usually something like "a to z, 0 to 9, plus underscore" (case insensitive).
From your example data it seems all attribute values match this. It will not work if the values may start with something like a comma (unlikely), may be quoted, or may start with anything else. If so, you need a more fool proof setup, such as parse from the start: skipping the attribute name by locating the first = character.
Be specific and use a character class:
import re
string = "[attribute1=value1, attribute2=, attribute3=value3, attribute4=]"
rx = r'\w+=(?=[,\]])'
string = re.sub(rx, '\g<0>None', string)
print string
# [attribute1=value1, attribute2=None, attribute3=value3, attribute4=None]