Related
I am trying to perform a 2d convolution in python using numpy
I have a 2d array as follows with kernel H_r for the rows and H_c for the columns
data = np.zeros((nr, nc), dtype=np.float32)
#fill array with some data here then convolve
for r in range(nr):
data[r,:] = np.convolve(data[r,:], H_r, 'same')
for c in range(nc):
data[:,c] = np.convolve(data[:,c], H_c, 'same')
data = data.astype(np.uint8);
It does not produce the output that I was expecting, does this code look OK, I think the problem is with the casting from float32 to 8bit. Whats the best way to do this
Thanks
Maybe it is not the most optimized solution, but this is an implementation I used before with numpy library for Python:
def convolution2d(image, kernel, bias):
m, n = kernel.shape
if (m == n):
y, x = image.shape
y = y - m + 1
x = x - m + 1
new_image = np.zeros((y,x))
for i in range(y):
for j in range(x):
new_image[i][j] = np.sum(image[i:i+m, j:j+m]*kernel) + bias
return new_image
I hope this code helps other guys with the same doubt.
Regards.
Edit [Jan 2019]
#Tashus comment bellow is correct, and #dudemeister's answer is thus probably more on the mark. The function he suggested is also more efficient, by avoiding a direct 2D convolution and the number of operations that would entail.
Possible Problem
I believe you are doing two 1d convolutions, the first per columns and the second per rows, and replacing the results from the first with the results of the second.
Notice that numpy.convolve with the 'same' argument returns an array of equal shape to the largest one provided, so when you make the first convolution you already populated the entire data array.
One good way to visualize your arrays during these steps is to use Hinton diagrams, so you can check which elements already have a value.
Possible Solution
You can try to add the results of the two convolutions (use data[:,c] += .. instead of data[:,c] = on the second for loop), if your convolution matrix is the result of using the one dimensional H_r and H_c matrices like so:
Another way to do that would be to use scipy.signal.convolve2d with a 2d convolution array, which is probably what you wanted to do in the first place.
Since you already have your kernel separated you should simply use the sepfir2d function from scipy:
from scipy.signal import sepfir2d
convolved = sepfir2d(data, H_r, H_c)
On the other hand, the code you have there looks all right ...
I checked out many implementations and found none for my purpose, which should be really simple. So here is a dead-simple implementation with for loop
def convolution2d(image, kernel, stride, padding):
image = np.pad(image, [(padding, padding), (padding, padding)], mode='constant', constant_values=0)
kernel_height, kernel_width = kernel.shape
padded_height, padded_width = image.shape
output_height = (padded_height - kernel_height) // stride + 1
output_width = (padded_width - kernel_width) // stride + 1
new_image = np.zeros((output_height, output_width)).astype(np.float32)
for y in range(0, output_height):
for x in range(0, output_width):
new_image[y][x] = np.sum(image[y * stride:y * stride + kernel_height, x * stride:x * stride + kernel_width] * kernel).astype(np.float32)
return new_image
It might not be the most optimized solution either, but it is approximately ten times faster than the one proposed by #omotto and it only uses basic numpy function (as reshape, expand_dims, tile...) and no 'for' loops:
def gen_idx_conv1d(in_size, ker_size):
"""
Generates a list of indices. This indices correspond to the indices
of a 1D input tensor on which we would like to apply a 1D convolution.
For instance, with a 1D input array of size 5 and a kernel of size 3, the
1D convolution product will successively looks at elements of indices [0,1,2],
[1,2,3] and [2,3,4] in the input array. In this case, the function idx_conv1d(5,3)
outputs the following array: array([0,1,2,1,2,3,2,3,4]).
args:
in_size: (type: int) size of the input 1d array.
ker_size: (type: int) kernel size.
return:
idx_list: (type: np.array) list of the successive indices of the 1D input array
access to the 1D convolution algorithm.
example:
>>> gen_idx_conv1d(in_size=5, ker_size=3)
array([0, 1, 2, 1, 2, 3, 2, 3, 4])
"""
f = lambda dim1, dim2, axis: np.reshape(np.tile(np.expand_dims(np.arange(dim1),axis),dim2),-1)
out_size = in_size-ker_size+1
return f(ker_size, out_size, 0)+f(out_size, ker_size, 1)
def repeat_idx_2d(idx_list, nbof_rep, axis):
"""
Repeats an array of indices (idx_list) a number of time (nbof_rep) "along" an axis
(axis). This function helps to browse through a 2d array of size
(len(idx_list),nbof_rep).
args:
idx_list: (type: np.array or list) a 1D array of indices.
nbof_rep: (type: int) number of repetition.
axis: (type: int) axis "along" which the repetition will be applied.
return
idx_list: (type: np.array) a 1D array of indices of size len(idx_list)*nbof_rep.
example:
>>> a = np.array([0, 1, 2])
>>> repeat_idx_2d(a, 3, 0) # repeats array 'a' 3 times along 'axis' 0
array([0, 0, 0, 1, 1, 1, 2, 2, 2])
>>> repeat_idx_2d(a, 3, 1) # repeats array 'a' 3 times along 'axis' 1
array([0, 1, 2, 0, 1, 2, 0, 1, 2])
>>> b = np.reshape(np.arange(3*4), (3,4))
>>> b[repeat_idx_2d(np.arange(3), 4, 0), repeat_idx_2d(np.arange(4), 3, 1)]
array([0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11])
"""
assert axis in [0,1], "Axis should be equal to 0 or 1."
tile_axis = (nbof_rep,1) if axis else (1,nbof_rep)
return np.reshape(np.tile(np.expand_dims(idx_list, 1),tile_axis),-1)
def conv2d(im, ker):
"""
Performs a 'valid' 2D convolution on an image. The input image may be
a 2D or a 3D array.
The output image first two dimensions will be reduced depending on the
convolution size.
The kernel may be a 2D or 3D array. If 2D, it will be applied on every
channel of the input image. If 3D, its last dimension must match the
image one.
args:
im: (type: np.array) image (2D or 3D).
ker: (type: np.array) convolution kernel (2D or 3D).
returns:
im: (type: np.array) convolved image.
example:
>>> im = np.reshape(np.arange(10*10*3),(10,10,3))/(10*10*3) # 3D image
>>> ker = np.array([[0,1,0],[-1,0,1],[0,-1,0]]) # 2D kernel
>>> conv2d(im, ker) # 3D array of shape (8,8,3)
"""
if len(im.shape)==2: # if the image is a 2D array, it is reshaped by expanding the last dimension
im = np.expand_dims(im,-1)
im_x, im_y, im_w = im.shape
if len(ker.shape)==2: # if the kernel is a 2D array, it is reshaped so it will be applied to all of the image channels
ker = np.tile(np.expand_dims(ker,-1),[1,1,im_w]) # the same kernel will be applied to all of the channels
assert ker.shape[-1]==im.shape[-1], "Kernel and image last dimension must match."
ker_x = ker.shape[0]
ker_y = ker.shape[1]
# shape of the output image
out_x = im_x - ker_x + 1
out_y = im_y - ker_y + 1
# reshapes the image to (out_x, ker_x, out_y, ker_y, im_w)
idx_list_x = gen_idx_conv1d(im_x, ker_x) # computes the indices of a 1D conv (cf. idx_conv1d doc)
idx_list_y = gen_idx_conv1d(im_y, ker_y)
idx_reshaped_x = repeat_idx_2d(idx_list_x, len(idx_list_y), 0) # repeats the previous indices to be used in 2D (cf. repeat_idx_2d doc)
idx_reshaped_y = repeat_idx_2d(idx_list_y, len(idx_list_x), 1)
im_reshaped = np.reshape(im[idx_reshaped_x, idx_reshaped_y, :], [out_x, ker_x, out_y, ker_y, im_w]) # reshapes
# reshapes the 2D kernel
ker = np.reshape(ker,[1, ker_x, 1, ker_y, im_w])
# applies the kernel to the image and reduces the dimension back to the one of original input image
return np.squeeze(np.sum(im_reshaped*ker, axis=(1,3)))
I tried to add a lot of comments to explain the method but the global idea is to reshape the 3D input image to a 5D one of shape (output_image_height, kernel_height, output_image_width, kernel_width, output_image_channel) and then to apply the kernel directly using the basic array multiplication. Of course, this methods is then using more memory (during the execution the size of the image is thus multiply by kernel_height*kernel_width) but it is faster.
To do this reshape step, I 'over-used' the indexing methods of numpy arrays, especially, the possibility of giving a numpy array as indices into a numpy array.
This methods could also be used to re-code the 2D convolution product in Pytorch or Tensorflow using the base math functions but I have no doubt in saying that it will be slower than the existing nn.conv2d operator...
I really enjoyed coding this method by only using the numpy basic tools.
One of the most obvious is to hard code the kernel.
img = img.convert('L')
a = np.array(img)
out = np.zeros([a.shape[0]-2, a.shape[1]-2], dtype='float')
out += a[:-2, :-2]
out += a[1:-1, :-2]
out += a[2:, :-2]
out += a[:-2, 1:-1]
out += a[1:-1,1:-1]
out += a[2:, 1:-1]
out += a[:-2, 2:]
out += a[1:-1, 2:]
out += a[2:, 2:]
out /= 9.0
out = out.astype('uint8')
img = Image.fromarray(out)
This example does a box blur 3x3 completely unrolled. You can multiply the values where you have a different value and divide them by a different amount. But, if you honestly want the quickest and dirtiest method this is it. I think it beats Guillaume Mougeot's method by a factor of like 5. His method beating the others by a factor of 10.
It may lose a few steps if you're doing something like a gaussian blur. and need to multiply some stuff.
Try to first round and then cast to uint8:
data = data.round().astype(np.uint8);
I wrote this convolve_stride which uses numpy.lib.stride_tricks.as_strided. Moreover it supports both strides and dilation. It is also compatible to tensor with order > 2.
import numpy as np
from numpy.lib.stride_tricks import as_strided
from im2col import im2col
def conv_view(X, F_s, dr, std):
X_s = np.array(X.shape)
F_s = np.array(F_s)
dr = np.array(dr)
Fd_s = (F_s - 1) * dr + 1
if np.any(Fd_s > X_s):
raise ValueError('(Dilated) filter size must be smaller than X')
std = np.array(std)
X_ss = np.array(X.strides)
Xn_s = (X_s - Fd_s) // std + 1
Xv_s = np.append(Xn_s, F_s)
Xv_ss = np.tile(X_ss, 2) * np.append(std, dr)
return as_strided(X, Xv_s, Xv_ss, writeable=False)
def convolve_stride(X, F, dr=None, std=None):
if dr is None:
dr = np.ones(X.ndim, dtype=int)
if std is None:
std = np.ones(X.ndim, dtype=int)
if not (X.ndim == F.ndim == len(dr) == len(std)):
raise ValueError('X.ndim, F.ndim, len(dr), len(std) must be the same')
Xv = conv_view(X, F.shape, dr, std)
return np.tensordot(Xv, F, axes=X.ndim)
%timeit -n 100 -r 10 convolve_stride(A, F)
#31.2 ms ± 1.31 ms per loop (mean ± std. dev. of 10 runs, 100 loops each)
Super simple and fast convolution using only basic numpy:
import numpy as np
def conv2d(image, kernel):
# apply kernel to image, return image of the same shape
# assume both image and kernel are 2D arrays
# kernel = np.flipud(np.fliplr(kernel)) # optionally flip the kernel
k = kernel.shape[0]
width = k//2
# place the image inside a frame to compensate for the kernel overlap
a = framed(image, width)
b = np.zeros(image.shape) # fill the output array with zeros; do not use np.empty()
# shift the image around each pixel, multiply by the corresponding kernel value and accumulate the results
for p, dp, r, dr in [(i, i + image.shape[0], j, j + image.shape[1]) for i in range(k) for j in range(k)]:
b += a[p:dp, r:dr] * kernel[p, r]
# or just write two nested for loops if you prefer
# np.clip(b, 0, 255, out=b) # optionally clip values exceeding the limits
return b
def framed(image, width):
a = np.zeros((image.shape[0]+2*width, image.shape[1]+2*width))
a[width:-width, width:-width] = image
# alternatively fill the frame with ones or copy border pixels
return a
Run it:
Image.fromarray(conv2d(image, kernel).astype('uint8'))
Instead of sliding the kernel along the image and computing the transformation pixel by pixel, create a series of shifted versions of the image corresponding to each element in the kernel and apply the corresponding kernel value to each of the shifted image versions.
This is probably the fastest you can get using just basic numpy; the speed is already comparable to C implementation of scipy convolve2d and better than fftconvolve. The idea is similar to #Tatarize. This example works only for one color component; for RGB just repeat for each (or modify the algorithm accordingly).
Typically, Convolution 2D is a misnomer. Ideally, under the hood,
whats being done is a correlation of 2 matrices.
pad == same
returns the output as the same as input dimension
It can also take asymmetric images. In order to perform correlation(convolution in deep learning lingo) on a batch of 2d matrices, one can iterate over all the channels, calculate the correlation for each of the channel slices with the respective filter slice.
For example: If image is (28,28,3) and filter size is (5,5,3) then take each of the 3 slices from the image channel and perform the cross correlation using the custom function above and stack the resulting matrix in the respective dimension of the output.
def get_cross_corr_2d(W, X, pad = 'valid'):
if(pad == 'same'):
pr = int((W.shape[0] - 1)/2)
pc = int((W.shape[1] - 1)/2)
conv_2d = np.zeros((X.shape[0], X.shape[1]))
X_pad = np.zeros((X.shape[0] + 2*pr, X.shape[1] + 2*pc))
X_pad[pr:pr+X.shape[0], pc:pc+X.shape[1]] = X
for r in range(conv_2d.shape[0]):
for c in range(conv_2d.shape[1]):
conv_2d[r,c] = np.sum(np.inner(W, X_pad[r:r+W.shape[0], c:c+W.shape[1]]))
return conv_2d
else:
pr = W.shape[0] - 1
pc = W.shape[1] - 1
conv_2d = np.zeros((X.shape[0] - W.shape[0] + 2*pr + 1,
X.shape[1] - W.shape[1] + 2*pc + 1))
X_pad = np.zeros((X.shape[0] + 2*pr, X.shape[1] + 2*pc))
X_pad[pr:pr+X.shape[0], pc:pc+X.shape[1]] = X
for r in range(conv_2d.shape[0]):
for c in range(conv_2d.shape[1]):
conv_2d[r,c] = np.sum(np.multiply(W, X_pad[r:r+W.shape[0], c:c+W.shape[1]]))
return conv_2d
This code incorrect:
for r in range(nr):
data[r,:] = np.convolve(data[r,:], H_r, 'same')
for c in range(nc):
data[:,c] = np.convolve(data[:,c], H_c, 'same')
See Nussbaumer transformation from multidimentional convolution to one dimentional.
I have a numpy array of 300x300 where I want to keep all elements periodically. Specifically, for both axes I want to keep the first 5 elements, then discard 15, keep 5, discard 15, etc. This should result in an array of 75x75 elements. How can this be done?
You can created a 1D mask, that carries out the keep/discard function, and then repeat the mask and apply the mask to the array. Here is an example.
import numpy as np
size = 300
array = np.arange(size).reshape((size, 1)) * np.arange(size).reshape((1, size))
mask = np.concatenate((np.ones(5), np.zeros(15))).astype(bool)
period = len(mask)
mask = np.repeat(mask.reshape((1, period)), repeats=size // period, axis=0)
mask = np.concatenate(mask, axis=0)
result = array[mask][:, mask]
print(result.shape)
You can view the array as series of 20x20 blocks, of which you want to keep the upper-left 5x5 portion. Let's say you have
keep = 5
discard = 15
This only works if
assert all(s % (keep + discard) == 0 for s in arr.shape)
First compute the shape of the view and use it:
block = keep + discard
shape1 = (arr.shape[0] // block, block, arr.shape[1] // block, block)
view = arr.reshape(shape1)[:, :keep, :, :keep]
The following operation will create a copy of the data because the view creates a non-contiguous buffer:
shape2 = (shape1[0] * keep, shape1[2] * keep)
result = view.reshape(shape2)
You can compute shape1 and shape2 in a more general manner with something like
shape1 = tuple(
np.stack((np.array(arr.shape) // block,
np.full(arr.ndim, block)), -1).ravel())
shape2 = tuple(np.array(shape1[::2]) * keep)
I would recommend packaging this into a function.
Here is my first thought of a solution. Will update later if I think of one with fewer lines. This should work even if the input is not square:
output = []
for i in range(len(arr)):
tmp = []
if i % (15+5) < 5: # keep first 5, then discard next 15
for j in range(len(arr[i])):
if j % (15+5) < 5: # keep first 5, then discard next 15
tmp.append(arr[i,j])
output.append(tmp)
Update:
Building off of Yang's answer, here is another way which uses np.tile, which repeats an array a given number of times along each axis. This relies on the input array being square in dimension.
import numpy as np
# Define one instance of the keep/discard box
keep, discard = 5, 15
mask = np.concatenate([np.ones(keep), np.zeros(discard)])
mask_2d = mask.reshape((keep+discard,1)) * mask.reshape((1,keep+discard))
# Tile it out -- overshoot, then trim to match size
count = len(arr)//len(mask_2d) + 1
tiled = np.tile(mask_2d, [count,count]).astype('bool')
tiled = tiled[:len(arr), :len(arr)]
# Apply the mask to the input array
dim = sum(tiled[0])
output = arr[tiled].reshape((dim,dim))
Another option using meshgrid and a modulo:
# MyArray = 300x300 numpy array
r = np.r_[0:300] # A slide from 0->300
xv, yv = np.meshgrid(r, r) # x and y grid
mask = ((xv%20)<5) & ((yv%20)<5) # We create the boolean mask
result = MyArray[mask].reshape((75,75)) # We apply the mask and reshape the final output
I have this for loop:
blockSize = 5
ds = np.arange(20)
ds = np.reshape(ds, (1, len(ds))
counts = np.zeros(len(ds[0]/blockSize))
for i in range(len(counts[0])):
counts[0, i] = np.floor(np.sum(ds[0, i*blockSize:i*blockSize+blockSize]))
I am trying to vectorize it, doing something like this:
countIndices = np.arange(len(counts[0]))
counts[0, countsIndices] = np.floor(np.sum(ds[0, countIndices*blockSize:countIndices*blockSize + blockSize]))
However, this does not work and gives this error:
counts[0, countIndices] = np.floor(np.sum(ds[0, countIndices*blockSize:countIndices*blockSize + blockSize]))
TypeError: only integer scalar arrays can be converted to a scalar index
I know that something like this works:
counts[0, countIndices] = np.floor(ds[0, countIndices*blockSize]
+ ds[0, countIndices*blockSize + 2] +
... ds[0, countIndices*blockSize + blockSize])
The issue is that for large values of blocksize (which blocksize is very large in my actual code), this is not feasible to implement. I am confused as to how to accomplish what I want. Any help is greatly appreciated.
You don't need to do floor if you store the result to an integer array. You can also create a fake new axis of size blockSize to fully vectorize your operation.
block_size = 5
ds = np.arange(80.0).reshape(4, -1) # Shape (4, 20)
counts = np.empty((ds.shape[0], ds.shape[1] // block_size), dtype=int)
To introduce the fake dimension and sum:
ds.reshape(ds.shape[0], -1, block_size).sum(axis=-1, out=counts)
Reshaping does not copy the data, so the operation ds.reshape(ds.shape[0], -1, block_size) is extremely cheap in both time and space.
You can use -1 for one of the reshape dimensions to avoid computing/writing out long division expressions.
I am comparing 2 numpy arrays, and want to add them together. but, before doing so, i need to make sure they are the same size. If the size are not same, then take the smaller sized one and fill the last rows with zero to match the shape.
Both array have 16 columns and N rows. I am assuming it should be pretty straight forward, but I can't get my head around it. So far I am able to compare the 2 array shape.
import csv
import numpy as np
import sys
data = np.genfromtxt('./test1.csv', dtype=float, delimiter=',')
data_sys = np.genfromtxt('./test2.csv', dtype=float, delimiter=',')
print data.shape
print data_sys.shape
if data.shape != data_sys.shape:
print "we have an error"
This is the output I got:
=============New file.csv============
(603, 16)
(604, 16)
we have an error
I want the fill the last row of "data" array with 0 so that I can add the 2 arrays.
Thanks for your help.
You can use vstack(array1, array2) from numpy which stacks arrays vertically. For example:
A = np.random.randint(2, size = (2, 16))
B = np.random.randint(2, size = (5, 16))
print A.shape
print B.shape
if A.shape[0] < B.shape[0]:
A = np.vstack((A, np.zeros((B.shape[0] - A.shape[0], 16))))
elif A.shape[0] > B.shape[0]:
B = np.vstack((B, np.zeros((A.shape[0] - B.shape[0], 16))))
print A.shape
print A
In your case:
if data.shape[0] < data_sys.shape[0]:
data = np.vstack((data, np.zeros((data_sys.shape[0] - data.shape[0], 16))))
elif data.shape[0] > data_sys.shape[0]:
data_sys = np.vstack((data_sys, np.zeros((data.shape[0] - data_sys.shape[0], 16))))
I assume that your matrices have always the same number of columns, if not you can similarly use hstack to stack them horizontally.
If you have only two files, and their shapes differ in just the 0th dimension, a simple check and copy is probably easiest, though it lacks generality:
import numpy as np
data = np.genfromtxt('./test1.csv', dtype=float, delimiter=',')
data_sys = np.genfromtxt('./test2.csv', dtype=float, delimiter=',')
fill_value = 0 # could be np.nan or something else instead
if data.shape[0]>data_sys.shape[0]:
temp = data_sys
data_sys = np.ones(data.shape)*fill_value
data_sys[:temp.shape[0],:] = temp
elif data.shape[0]<data_sys.shape[0]:
temp = data
data = np.ones(data_sys.shape)*fill_value
data[:temp.shape[0],:] = temp
print 'Using conditional:'
print data.shape
print data_sys.shape
if data.shape != data_sys.shape:
print "we have an error"
A much more general solution is a custom class--overkill for your two files but much easier if you have lots of files to handle. The basic idea is that static class variables sx and sy keep track of the largest widths and heights, and are used when get_data is called, to output a standard shape array. This is pre-filled with your desired fill value, and the actual data from the corresponding file are copied into the upper left corner of the standard shape array:
import numpy as np
class IsomorphicArray:
sy = 0 # static class variable
sx = 0 # static class variable
fill_value = 0.0
def __init__(self,csv_filename):
self.data = np.genfromtxt(csv_filename,dtype=float,delimiter=',')
self.instance_sy,self.instance_sx = self.data.shape
if self.instance_sy>IsomorphicArray.sy:
IsomorphicArray.sy = self.instance_sy
if self.instance_sx>IsomorphicArray.sx:
IsomorphicArray.sx = self.instance_sx
def get_data(self):
out = np.ones((IsomorphicArray.sy,IsomorphicArray.sx))*self.fill_value
out[:self.instance_sy,:self.instance_sx] = self.data
return out
isomorphic_array_list = []
for filename in ['./test1.csv','./test2.csv']:
isomorphic_array_list.append(IsomorphicArray(filename))
numpy_array_list = []
for isomorphic_array in isomorphic_array_list:
numpy_array_list.append(isomorphic_array.get_data())
print 'Using custom class:'
for numpy_array in numpy_array_list:
print numpy_array.shape
Assuming both arrays have 16 columns
len1=len(data)
len2=len(data_sys)
if len1<len2:
data=np.append(data, np.zeros((len2-len1, 16)),axis=0)
elif len2<len1:
data_sys=np.append(data_sys, np.zeros((len1-len2, 16)),axis=0)
print data.shape
print data_sys.shape
if data.shape != data_sys.shape:
print "we have an error"
else:
print "we r good"
Numpy provides an append function to add values to an array: see here for details. In multi-dimensional arrays you can define how the values should be added. As you have already the information which of your arrays is the smaller one, just add the desired number of zeroes with creating a zero filled array first by numpy.zeroes and then append it to your target array.
It might be necessary to flatten your array first and then to reshape it.
I had a similar situation. Two arrays of sizes mask_in:(n1,m1) and mask_ot:(n2,m2)that were generated through a mask of a 2D image of size (N,M) where A2 is larger than A1 and both share a common center (X0,Y0). I followed the approach suggested by #AniaG using vstack and hstack. I simply obtained the shapes of both arrays, size difference and finally account the number of missing elements at both ends.
Here is what I got:
mask_in = np.random.randint(2, size = (2, 8))
mask_ot = np.random.randint(2, size = (6, 16))
mask_in_amp = mask_in
dif_row = mask_ot.shape[0]-mask_in_amp.shape[0]
dif_col = mask_ot.shape[1]-mask_in_amp.shape[1]
complete_row = dif_row / 2
complete_col = dif_col / 2
mask_in_amp = np.vstack((mask_in_amp, np.zeros((complete_row, mask_in_amp.shape[1]))))
mask_in_amp = np.vstack((np.zeros((complete_row, mask_in_amp.data.shape[1])), mask_in_amp))
mask_in_amp = np.hstack((mask_in_amp, np.zeros((mask_in_amp.shape[0],complete_col))))
mask_in_amp = np.hstack((np.zeros((mask_in_amp.shape[0],complete_col)), mask_in_amp))
If you don't care about the exact shapes of two arrays you can also do the following:
if data.size == datasys.size:
print ('arrays have the same number of elements, and possibly shape')
else:
print ('arrays do not have the same shape for sure')
I am trying to perform a 2d convolution in python using numpy
I have a 2d array as follows with kernel H_r for the rows and H_c for the columns
data = np.zeros((nr, nc), dtype=np.float32)
#fill array with some data here then convolve
for r in range(nr):
data[r,:] = np.convolve(data[r,:], H_r, 'same')
for c in range(nc):
data[:,c] = np.convolve(data[:,c], H_c, 'same')
data = data.astype(np.uint8);
It does not produce the output that I was expecting, does this code look OK, I think the problem is with the casting from float32 to 8bit. Whats the best way to do this
Thanks
Maybe it is not the most optimized solution, but this is an implementation I used before with numpy library for Python:
def convolution2d(image, kernel, bias):
m, n = kernel.shape
if (m == n):
y, x = image.shape
y = y - m + 1
x = x - m + 1
new_image = np.zeros((y,x))
for i in range(y):
for j in range(x):
new_image[i][j] = np.sum(image[i:i+m, j:j+m]*kernel) + bias
return new_image
I hope this code helps other guys with the same doubt.
Regards.
Edit [Jan 2019]
#Tashus comment bellow is correct, and #dudemeister's answer is thus probably more on the mark. The function he suggested is also more efficient, by avoiding a direct 2D convolution and the number of operations that would entail.
Possible Problem
I believe you are doing two 1d convolutions, the first per columns and the second per rows, and replacing the results from the first with the results of the second.
Notice that numpy.convolve with the 'same' argument returns an array of equal shape to the largest one provided, so when you make the first convolution you already populated the entire data array.
One good way to visualize your arrays during these steps is to use Hinton diagrams, so you can check which elements already have a value.
Possible Solution
You can try to add the results of the two convolutions (use data[:,c] += .. instead of data[:,c] = on the second for loop), if your convolution matrix is the result of using the one dimensional H_r and H_c matrices like so:
Another way to do that would be to use scipy.signal.convolve2d with a 2d convolution array, which is probably what you wanted to do in the first place.
Since you already have your kernel separated you should simply use the sepfir2d function from scipy:
from scipy.signal import sepfir2d
convolved = sepfir2d(data, H_r, H_c)
On the other hand, the code you have there looks all right ...
I checked out many implementations and found none for my purpose, which should be really simple. So here is a dead-simple implementation with for loop
def convolution2d(image, kernel, stride, padding):
image = np.pad(image, [(padding, padding), (padding, padding)], mode='constant', constant_values=0)
kernel_height, kernel_width = kernel.shape
padded_height, padded_width = image.shape
output_height = (padded_height - kernel_height) // stride + 1
output_width = (padded_width - kernel_width) // stride + 1
new_image = np.zeros((output_height, output_width)).astype(np.float32)
for y in range(0, output_height):
for x in range(0, output_width):
new_image[y][x] = np.sum(image[y * stride:y * stride + kernel_height, x * stride:x * stride + kernel_width] * kernel).astype(np.float32)
return new_image
It might not be the most optimized solution either, but it is approximately ten times faster than the one proposed by #omotto and it only uses basic numpy function (as reshape, expand_dims, tile...) and no 'for' loops:
def gen_idx_conv1d(in_size, ker_size):
"""
Generates a list of indices. This indices correspond to the indices
of a 1D input tensor on which we would like to apply a 1D convolution.
For instance, with a 1D input array of size 5 and a kernel of size 3, the
1D convolution product will successively looks at elements of indices [0,1,2],
[1,2,3] and [2,3,4] in the input array. In this case, the function idx_conv1d(5,3)
outputs the following array: array([0,1,2,1,2,3,2,3,4]).
args:
in_size: (type: int) size of the input 1d array.
ker_size: (type: int) kernel size.
return:
idx_list: (type: np.array) list of the successive indices of the 1D input array
access to the 1D convolution algorithm.
example:
>>> gen_idx_conv1d(in_size=5, ker_size=3)
array([0, 1, 2, 1, 2, 3, 2, 3, 4])
"""
f = lambda dim1, dim2, axis: np.reshape(np.tile(np.expand_dims(np.arange(dim1),axis),dim2),-1)
out_size = in_size-ker_size+1
return f(ker_size, out_size, 0)+f(out_size, ker_size, 1)
def repeat_idx_2d(idx_list, nbof_rep, axis):
"""
Repeats an array of indices (idx_list) a number of time (nbof_rep) "along" an axis
(axis). This function helps to browse through a 2d array of size
(len(idx_list),nbof_rep).
args:
idx_list: (type: np.array or list) a 1D array of indices.
nbof_rep: (type: int) number of repetition.
axis: (type: int) axis "along" which the repetition will be applied.
return
idx_list: (type: np.array) a 1D array of indices of size len(idx_list)*nbof_rep.
example:
>>> a = np.array([0, 1, 2])
>>> repeat_idx_2d(a, 3, 0) # repeats array 'a' 3 times along 'axis' 0
array([0, 0, 0, 1, 1, 1, 2, 2, 2])
>>> repeat_idx_2d(a, 3, 1) # repeats array 'a' 3 times along 'axis' 1
array([0, 1, 2, 0, 1, 2, 0, 1, 2])
>>> b = np.reshape(np.arange(3*4), (3,4))
>>> b[repeat_idx_2d(np.arange(3), 4, 0), repeat_idx_2d(np.arange(4), 3, 1)]
array([0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11])
"""
assert axis in [0,1], "Axis should be equal to 0 or 1."
tile_axis = (nbof_rep,1) if axis else (1,nbof_rep)
return np.reshape(np.tile(np.expand_dims(idx_list, 1),tile_axis),-1)
def conv2d(im, ker):
"""
Performs a 'valid' 2D convolution on an image. The input image may be
a 2D or a 3D array.
The output image first two dimensions will be reduced depending on the
convolution size.
The kernel may be a 2D or 3D array. If 2D, it will be applied on every
channel of the input image. If 3D, its last dimension must match the
image one.
args:
im: (type: np.array) image (2D or 3D).
ker: (type: np.array) convolution kernel (2D or 3D).
returns:
im: (type: np.array) convolved image.
example:
>>> im = np.reshape(np.arange(10*10*3),(10,10,3))/(10*10*3) # 3D image
>>> ker = np.array([[0,1,0],[-1,0,1],[0,-1,0]]) # 2D kernel
>>> conv2d(im, ker) # 3D array of shape (8,8,3)
"""
if len(im.shape)==2: # if the image is a 2D array, it is reshaped by expanding the last dimension
im = np.expand_dims(im,-1)
im_x, im_y, im_w = im.shape
if len(ker.shape)==2: # if the kernel is a 2D array, it is reshaped so it will be applied to all of the image channels
ker = np.tile(np.expand_dims(ker,-1),[1,1,im_w]) # the same kernel will be applied to all of the channels
assert ker.shape[-1]==im.shape[-1], "Kernel and image last dimension must match."
ker_x = ker.shape[0]
ker_y = ker.shape[1]
# shape of the output image
out_x = im_x - ker_x + 1
out_y = im_y - ker_y + 1
# reshapes the image to (out_x, ker_x, out_y, ker_y, im_w)
idx_list_x = gen_idx_conv1d(im_x, ker_x) # computes the indices of a 1D conv (cf. idx_conv1d doc)
idx_list_y = gen_idx_conv1d(im_y, ker_y)
idx_reshaped_x = repeat_idx_2d(idx_list_x, len(idx_list_y), 0) # repeats the previous indices to be used in 2D (cf. repeat_idx_2d doc)
idx_reshaped_y = repeat_idx_2d(idx_list_y, len(idx_list_x), 1)
im_reshaped = np.reshape(im[idx_reshaped_x, idx_reshaped_y, :], [out_x, ker_x, out_y, ker_y, im_w]) # reshapes
# reshapes the 2D kernel
ker = np.reshape(ker,[1, ker_x, 1, ker_y, im_w])
# applies the kernel to the image and reduces the dimension back to the one of original input image
return np.squeeze(np.sum(im_reshaped*ker, axis=(1,3)))
I tried to add a lot of comments to explain the method but the global idea is to reshape the 3D input image to a 5D one of shape (output_image_height, kernel_height, output_image_width, kernel_width, output_image_channel) and then to apply the kernel directly using the basic array multiplication. Of course, this methods is then using more memory (during the execution the size of the image is thus multiply by kernel_height*kernel_width) but it is faster.
To do this reshape step, I 'over-used' the indexing methods of numpy arrays, especially, the possibility of giving a numpy array as indices into a numpy array.
This methods could also be used to re-code the 2D convolution product in Pytorch or Tensorflow using the base math functions but I have no doubt in saying that it will be slower than the existing nn.conv2d operator...
I really enjoyed coding this method by only using the numpy basic tools.
One of the most obvious is to hard code the kernel.
img = img.convert('L')
a = np.array(img)
out = np.zeros([a.shape[0]-2, a.shape[1]-2], dtype='float')
out += a[:-2, :-2]
out += a[1:-1, :-2]
out += a[2:, :-2]
out += a[:-2, 1:-1]
out += a[1:-1,1:-1]
out += a[2:, 1:-1]
out += a[:-2, 2:]
out += a[1:-1, 2:]
out += a[2:, 2:]
out /= 9.0
out = out.astype('uint8')
img = Image.fromarray(out)
This example does a box blur 3x3 completely unrolled. You can multiply the values where you have a different value and divide them by a different amount. But, if you honestly want the quickest and dirtiest method this is it. I think it beats Guillaume Mougeot's method by a factor of like 5. His method beating the others by a factor of 10.
It may lose a few steps if you're doing something like a gaussian blur. and need to multiply some stuff.
Try to first round and then cast to uint8:
data = data.round().astype(np.uint8);
I wrote this convolve_stride which uses numpy.lib.stride_tricks.as_strided. Moreover it supports both strides and dilation. It is also compatible to tensor with order > 2.
import numpy as np
from numpy.lib.stride_tricks import as_strided
from im2col import im2col
def conv_view(X, F_s, dr, std):
X_s = np.array(X.shape)
F_s = np.array(F_s)
dr = np.array(dr)
Fd_s = (F_s - 1) * dr + 1
if np.any(Fd_s > X_s):
raise ValueError('(Dilated) filter size must be smaller than X')
std = np.array(std)
X_ss = np.array(X.strides)
Xn_s = (X_s - Fd_s) // std + 1
Xv_s = np.append(Xn_s, F_s)
Xv_ss = np.tile(X_ss, 2) * np.append(std, dr)
return as_strided(X, Xv_s, Xv_ss, writeable=False)
def convolve_stride(X, F, dr=None, std=None):
if dr is None:
dr = np.ones(X.ndim, dtype=int)
if std is None:
std = np.ones(X.ndim, dtype=int)
if not (X.ndim == F.ndim == len(dr) == len(std)):
raise ValueError('X.ndim, F.ndim, len(dr), len(std) must be the same')
Xv = conv_view(X, F.shape, dr, std)
return np.tensordot(Xv, F, axes=X.ndim)
%timeit -n 100 -r 10 convolve_stride(A, F)
#31.2 ms ± 1.31 ms per loop (mean ± std. dev. of 10 runs, 100 loops each)
Super simple and fast convolution using only basic numpy:
import numpy as np
def conv2d(image, kernel):
# apply kernel to image, return image of the same shape
# assume both image and kernel are 2D arrays
# kernel = np.flipud(np.fliplr(kernel)) # optionally flip the kernel
k = kernel.shape[0]
width = k//2
# place the image inside a frame to compensate for the kernel overlap
a = framed(image, width)
b = np.zeros(image.shape) # fill the output array with zeros; do not use np.empty()
# shift the image around each pixel, multiply by the corresponding kernel value and accumulate the results
for p, dp, r, dr in [(i, i + image.shape[0], j, j + image.shape[1]) for i in range(k) for j in range(k)]:
b += a[p:dp, r:dr] * kernel[p, r]
# or just write two nested for loops if you prefer
# np.clip(b, 0, 255, out=b) # optionally clip values exceeding the limits
return b
def framed(image, width):
a = np.zeros((image.shape[0]+2*width, image.shape[1]+2*width))
a[width:-width, width:-width] = image
# alternatively fill the frame with ones or copy border pixels
return a
Run it:
Image.fromarray(conv2d(image, kernel).astype('uint8'))
Instead of sliding the kernel along the image and computing the transformation pixel by pixel, create a series of shifted versions of the image corresponding to each element in the kernel and apply the corresponding kernel value to each of the shifted image versions.
This is probably the fastest you can get using just basic numpy; the speed is already comparable to C implementation of scipy convolve2d and better than fftconvolve. The idea is similar to #Tatarize. This example works only for one color component; for RGB just repeat for each (or modify the algorithm accordingly).
Typically, Convolution 2D is a misnomer. Ideally, under the hood,
whats being done is a correlation of 2 matrices.
pad == same
returns the output as the same as input dimension
It can also take asymmetric images. In order to perform correlation(convolution in deep learning lingo) on a batch of 2d matrices, one can iterate over all the channels, calculate the correlation for each of the channel slices with the respective filter slice.
For example: If image is (28,28,3) and filter size is (5,5,3) then take each of the 3 slices from the image channel and perform the cross correlation using the custom function above and stack the resulting matrix in the respective dimension of the output.
def get_cross_corr_2d(W, X, pad = 'valid'):
if(pad == 'same'):
pr = int((W.shape[0] - 1)/2)
pc = int((W.shape[1] - 1)/2)
conv_2d = np.zeros((X.shape[0], X.shape[1]))
X_pad = np.zeros((X.shape[0] + 2*pr, X.shape[1] + 2*pc))
X_pad[pr:pr+X.shape[0], pc:pc+X.shape[1]] = X
for r in range(conv_2d.shape[0]):
for c in range(conv_2d.shape[1]):
conv_2d[r,c] = np.sum(np.inner(W, X_pad[r:r+W.shape[0], c:c+W.shape[1]]))
return conv_2d
else:
pr = W.shape[0] - 1
pc = W.shape[1] - 1
conv_2d = np.zeros((X.shape[0] - W.shape[0] + 2*pr + 1,
X.shape[1] - W.shape[1] + 2*pc + 1))
X_pad = np.zeros((X.shape[0] + 2*pr, X.shape[1] + 2*pc))
X_pad[pr:pr+X.shape[0], pc:pc+X.shape[1]] = X
for r in range(conv_2d.shape[0]):
for c in range(conv_2d.shape[1]):
conv_2d[r,c] = np.sum(np.multiply(W, X_pad[r:r+W.shape[0], c:c+W.shape[1]]))
return conv_2d
This code incorrect:
for r in range(nr):
data[r,:] = np.convolve(data[r,:], H_r, 'same')
for c in range(nc):
data[:,c] = np.convolve(data[:,c], H_c, 'same')
See Nussbaumer transformation from multidimentional convolution to one dimentional.