I am trying to extract data from a .txt file in Python. My goal is to capture the last occurrence of a certain word and show the next line, so I do a reverse () of the text and read from behind. In this case, I search for the word 'MEC', and show the next line, but I capture all occurrences of the word, not the first.
Any idea what I need to do?
Thanks!
This is what my code looks like:
import re
from file_read_backwards import FileReadBackwards
with FileReadBackwards("camdex.txt", encoding="utf-8") as file:
for l in file:
lines = l
while line:
if re.match('MEC', line):
x = (file.readline())
x2 = (x.strip('\n'))
print(x2)
break
line = file.readline()
The txt file contains this:
MEC
29/35
MEC
28,29/35
And with my code print this output:
28,29/35
29/35
And my objetive is print only this:
28,29/35
This will give you the result as well. Loop through lines, add the matching lines to an array. Then print the last element.
import re
with open("data\camdex.txt", encoding="utf-8") as file:
result = []
for line in file:
if re.match('MEC', line):
x = file.readline()
result.append(x.strip('\n'))
print(result[-1])
Get rid of the extra imports and overhead. Read your file normally, remembering the last line that qualifies.
with ("camdex.txt", encoding="utf-8") as file:
for line in file:
if line.startswith("MEC"):
last = line
print(last[4:-1]) # "4" gets rid of "MEC "; "-1" stops just before the line feed.
If the file is very large, then reading backwards makes sense -- seeking to the end and backing up will be faster than reading to the end.
I have a large 11 GB .txt file with email addresses. I would like to save only the strings till the # symbol among each other. My output only generate the first line.I have used this code of a earlier project. I would like to save the output in a different .txt file. I hope someone could help me out.
my code:
import re
def get_html_string(file,start_string,end_string):
answer="nothing"
with open(file, 'rb') as open_file:
for line in open_file:
line = line.rstrip()
if re.search(start_string, line) :
answer=line
break
start=answer.find(start_string)+len(start_string)
end=answer.find(end_string)
#print(start,end,answer)
return answer[start:end]
beginstr=''
end='#'
file='test.txt'
readstring=str(get_html_string(file,beginstr,end))
print readstring
Your file is quite big (11G) so you shouldn't keep all those strings in memory. Instead, process the file line by line and write the result before reading next line.
This should be efficient :
with open('test.txt', 'r') as input_file:
with open('result.txt', 'w') as output_file:
for line in input_file:
prefix = line.split('#')[0]
output_file.write(prefix + '\n')
If your file looks like this example:
user#google.com
user2#jshds.com
Useruser#jsnl.com
You can use this:
def get_email_name(file_name):
with open(file_name) as file:
lines = file.readlines()
result = list()
for line in lines:
result.append(line.split('#')[0])
return result
get_email_name('emails.txt')
Out:
['user', 'user2', 'Useruser']
How to replace a specific line or a string with another string on a text file with Python? I tried this method:
with open("textfile.txt","r") as f:
newline = []
for word in f.readlines():
newline.append(word.replace("previous_line","new_line"))
Try below:
with open("test.txt", "r+") as f:
data=f.read()
Now we have all the contents of a file in variable data , now assuming each line is ending with a \n . We can split it .
mylines = data.splitlines()
for x in range(1,len(mylines)-1):
if myline[x]=='thanks for help':
myline[x] = myline[x-1]
data = "\\n".join(mylines)
f.write(data)
of course, if the line replacing the thanks for help is not the previous line, u may need to create some logic there.
I am reading a file and getting the first element from each start of the line, and comparing it to my list, if found, then I append it to the new output file that is supposed to be exactly like the input file in terms of the structure.
my_id_list = [
4985439
5605471
6144703
]
input file:
4985439 16:0.0719814
5303698 6:0.09407 19:0.132581
5605471 5:0.0486076
5808678 8:0.130536
6144703 5:0.193785 19:0.0492507
6368619 3:0.242678 6:0.041733
my attempt:
output_file = []
input_file = open('input_file', 'r')
for line in input_file:
my_line = np.array(line.split())
id = str(my_line[0])
if id in my_id_list:
output_file.append(line)
np.savetxt("output_file", output_file, fmt='%s')
Question is:
It is currently adding an extra empty line after each line written to the output file. How can I fix it? or is there any other way to do it more efficiently?
update:
output file should be for this example:
4985439 16:0.0719814
5605471 5:0.0486076
6144703 5:0.193785 19:0.0492507
try something like this
# read lines and strip trailing newline characters
with open('input_file','r') as f:
input_lines = [line.strip() for line in f.readlines()]
# collect all the lines that match your id list
output_file = [line for line in input_lines if line.split()[0] in my_id_list]
# write to output file
with open('output_file','w') as f:
f.write('\n'.join(output_file))
I don't know what numpy does to the text when reading it, but this is how you could do it without numpy:
my_id_list = {4985439, 5605471, 6144703} # a set is faster for membership testing
with open('input_file') as input_file:
# Your problem is most likely related to line-endings, so here
# we read the inputfile into an list of lines with intact line endings.
# To preserve the input, exactly, you would need to open the files
# in binary mode ('rb' for the input file, and 'wb' for the output
# file below).
lines = input_file.read().splitlines(keepends=True)
with open('output_file', 'w') as output_file:
for line in lines:
first_word = line.split()[0]
if first_word in my_id_list:
output_file.write(line)
getting the first word of each line is wasteful, since this:
first_word = line.split()[0]
creates a list of all "words" in the line when we just need the first one.
If you know that the columns are separated by spaces you can make it more efficient by only splitting on the first space:
first_word = line.split(' ', 1)[0]
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n