I am using conda as the Python3 package management tool, sometimes the conda repo did not contains some Python package. So I have to install it using pip, first I found the anaconda environment folder, the next step switch to the anaconda environment folder:
cd /usr/local/anaconda3/envs/pydolphin
then using this command to install package:
./bin/pip install musicbrainzngs
is there any short way to do this? is it possible to install it the PyCharm IDE the simple way? the PyCharm IDE using conda install by default.
First activate your conda environment:
conda activate <env>
This will switch to the version of pip installed in this environment. Then you can install using pip as per normal which will install it into your conda environment:
pip install musicbrainzngs
This error raised while installing geopandas. I've looking for its solution on the web, but none of them really explain what happened and how to solve it..
This is the full error:
Collecting geopandas
Using cached https://files.pythonhosted.org/packages/24/11/d77c157c16909bd77557d00798b05a5b6615ed60acb5900fbe6a65d35e93/geopandas-0.4.0-py2.py3-none-any.whl
Requirement already satisfied: shapely in c:\users\alvaro\anaconda3\envs\tfdeeplearning\lib\site-packages (from geopandas) (1.6.4.post2)
Requirement already satisfied: pandas in c:\users\alvaro\anaconda3\envs\tfdeeplearning\lib\site-packages (from geopandas) (0.20.3)
Collecting fiona (from geopandas)
Using cached https://files.pythonhosted.org/packages/3a/16/84960540e9fce61d767fd2f0f1d95f4c63e99ab5d8fddc308e8b51b059b8/Fiona-1.8.4.tar.gz
Complete output from command python setup.py egg_info:
A GDAL API version must be specified. Provide a path to gdal-config using a GDAL_CONFIG environment variable or use a GDAL_VERSION environment variable.
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in C:\Users\Alvaro\AppData\Local\Temp\pip-install-oxgkjg8l\fiona\
pip install wheel
pip install pipwin
pipwin install numpy
pipwin install pandas
pipwin install shapely
pipwin install gdal
pipwin install fiona
pipwin install pyproj
pipwin install six
pipwin install rtree
pipwin install geopandas
here are the source links:
http://geopandas.org/install.html#installation
https://pip.pypa.io/en/latest/user_guide/#installing-from-wheels
https://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy
If you still have problems, consider uninstalling the above (pip uninstall) and reinstalling.
I solved this problem by running the following commands:
pip install pipwin
pipwin install gdal
pipwin install fiona
pip install geopandas
Works successfully on Windows.
Geospatial Data Abstraction Library (GDAL) is a library designed for vector geospatial data formats. It's a prerequisite for installing Fiona, the Python API for OGR (which doesn't really stand for anything), which is in turn a prerequisite for Geopandas. On UNIX-like systems the gdal-config script tells Fiona stuff about your particular gdal installation.
It seems that your gdal-config is not in one of the usual places on your PATH, so Fiona was unable to find it.
If you're using Anaconda, best is to remove gdal with conda remove gdal and then do a fresh conda install geopandas.
As a general rule, if you're using Conda you should never use pip to install something inside it unless you're absolutely sure conda offers no support for it. (Many package can be found on conda by specifying the right channel - -c argument.) And specifically in the case of geopandas, the maintainers recommend using conda over pip, since pip requires you to install the dependencies correctly.
I had a lot of issues myself installing geopandas, mostly showing error when downloading fiona and gdal. I did every step above and did a conda install geopandas but failed. The only thing worked for me is to install fiona and gdal wheel separately.
go to the link by Christoph: gohlke:https://www.lfd.uci.edu/~gohlke/pythonlibs/#fiona
You can search for fiona and gdal wheel files. Make sure you choose the file as per your python version, if it is 3.7 then there would be cp37.
Download the file
go to command prompt, put cd and then pip install , install GDAL wheel file, then fiona, then just do pip install geopandas.
This solution worked for me.
To install gdal, I followed the following steps:
downloaded the version that satisfies my computer (64 bit) from
https://www.lfd.uci.edu/~gohlke/pythonlibs/ . The file was GDAL-3.1.4-cp37-cp37m-win_amd64.whl
Put the file in a folder on the desktop.
From cmd, i moved to that directory and executed python -m pip install GDAL-3.1.4-cp37-cp37m-win_amd64.whl
This is followed by installing fiona the same way: python -m pip install Fiona-1.8.18-cp37-cp37m-win_amd64.whl
For shapely, i executed conda install -c conda-forge shapely
After that, i was able to install keplergl as usual: pip install keplergl
install descartes: conda install -c conda-forge descartes (or python -m pip install descartes).
In this way, i didn't have to play around with the 'Environmental Variables' as this may affect other programs
Cheers..
Installing geopandas
Geopandas has very complex multi-language dependencies, some of which need to be built with consistent compiler versions across packages. Because of this, the geopandas docs recommend installing using conda in a new environment using conda-forge only. Here are some general best practices to keep in mind:
conda is the recommended installation method. You can install geopandas from pip or source, but it's going to be a bumpy ride and it's not recommended. If you're installing conda for the first time, I recommend you start with miniconda (or better yet miniforge, a conda-forge-first miniconda variant), not anaconda, to keep your base env lean.
When using conda, you should not mix and match conda channels.
When installing geopandas, try creating a fresh environment rather than installing into your base environment. If you have anaconda installed, it comes with a large number of packages from the "defaults" channel installed in your base environment. I recommend deleting anaconda and installing miniconda, then installing into a new environment.
Try to create a new environment with everything you plan to use all at once rather than iteratively modifying the environment. In other words, if you want to use geopandas with scikit_learn, folium, and rasterio, install them together with a single conda create command
As a last resort, delete your conda installation and re-install miniconda. Desperate times call for desperate measures, and this usually resolves gnarly installation nightmares.
To create a fresh conda environment in which you install all necessary dependencies at the same time, using the conda-forge channel:
conda create -n my-geopandas-env -c conda-forge geopandas [all other packages you need]
For example, I might set up an environment with something along the lines of...
conda create -n my-geopandas-env -c conda-forge python=3.9 \
ipython ipykernel geopandas scipy seaborn fiona matplotlib cartopy
Bundling your installations into a single environment creation step like this reduces the chance of packages falling out of sync. To speed this process up, you could first install mamba or mambaforge, a faster drop-in replacement for conda, into your base environment and then run the above commands with mamba instead of conda.
Generally, it's best to avoid installing much of anything in your base environment (cross-environment system utilities like mamba are some of the few exceptions). If you already have a complex base environment (maybe you started with anaconda rather than miniconda) this may be the time to delete your entire conda installation and start from scratch (I know that's terrifying... sorry! but it'll save you heartache in the future). mamba is great for speeding this process up.
Connecting your editor to the conda environment
Once you have installed all of the packages you need, activate your environment with conda activate my-geopandas-env. See the conda guide to managing environments for more info.
Jupyter/ipython
Some editors/IDEs including jupyter require additional packages - jupyter requires that ipython and ipykernel be installed in order to load the environment within the notebook or editor - that's why I included ipykernel in my list above. See the ipykernel docs for more info.
Other IDES
To link this environment to an IDE such as VSCODE, spider, etc., find the location of this python version with conda run -n my-geopandas-env which python then point your editor to this python executable. Check the docs of your specific editor to get more targeted info about how to set up a conda environment for use with your editor:
Spider: FAQ on using an existing environment and Spider wiki guide to working with packages and environments
VSCode: Using python environments in vscode
PyCharm: Configure a conda virtual environment
I don't have conda installed, then using just pip I followed these steps:
Download GDAL and Fiona wheels directly on:
GDAL: https://www.lfd.uci.edu/~gohlke/pythonlibs/#gdal
FIONA: https://www.lfd.uci.edu/~gohlke/pythonlibs/#fiona
Then:
pip install <gdal.whl>
pip install <fiona.whl>
In my case I did pip install GDAL-3.4.1-cp38-cp38-win_amd64.whl and Fiona-1.8.21-cp38-cp38-win_amd64.whl. Where cp38 stands for python 3.8.
After that you are able to install geopandas with pip as well.
pip install geo pandas
For me, the only solution was to install the ready binaries from here
https://www.lfd.uci.edu/~gohlke/pythonlibs/#gdal
Then just install locally
pip install GDAL-3.1.4-cp38-cp38-win_amd64.whl
One way in which I could install geopandas was through the Anaconda Navigator. Get into the environment and install the package 'geopandas'. After that I could import the geopandas package in spyder
I will add
!pip install descartes
to #JDOaktown list.
I started with pip install geopandas and got the error, but later tried with conda install --channel conda-forge geopandas and the error disappeared.
Successfully installed in RHEL 7.8.
It automatically downloaded the required packages. This might be helpful
Installing collected packages: certifi, pyproj, shapely, attrs, click, click-plugins, munch, cligj, fiona, geopandas
Successfully installed attrs-20.3.0 certifi-2020.11.8 click-7.1.2 click-plugins-1.1.1 cligj-0.7.0 fiona-1.8.17 geopandas-0.8.1 munch-2.5.0 pyproj-3.0.0.post1 shapely-1.7.1
If you want to install GDAL, Geopandas, Shapely, Fiona etc in a windows Virtual Environment download .whl files for all of them and first install GDAL using
pip install gdal-.whl
Following this command edit the activate.bat file in you venv\Scripts folder and add
GDAL_CONFIG = \venv\Lib\site-packages\osgeo
Then you can install rest using pip install
I started off with a clean environment gdal_test in Conda environments, but made the mistake of using the old activate gdal_test instead of conda activate gdal_test. This made Conda Environment resolving take forever, which is why I resolved to other methods at first.
Takeaway: let conda handle it, with a proper new environment.
I ran into this problem not with anaconda/windows, but with python:3.6 Docker image. Google search always led me to this question, so I think I will share how I resolve my issue in case others also end up here.
Based on here, you need to install system relevant packages in the Dockerfile before running pip install geopandas or pip install requirements.txt:
RUN apt-get update && apt-get install -y --no-install-recommends \
build-essential \
libatlas-base-dev \
libgdal-dev \
gfortran
The following worked on macOS:
brew install gdal --HEAD
Verify the installation by running gdal-config --version
Following that pip installation as normal worked without a problem.
I have just installed Anaconda with Python3.7 on my Ubuntu 18.04. Ubuntu 18.04 comes with Python3.6 by default (but not pip).
After installing Anaconda and reading its documentation, I can see that Anaconda comes with both conda and pip. This is the case, as I can see:
$ which pip
# Output: /home/user-name/anaconda3/bin/pip
$ pip --version
# Output:
pip 10.0.1 from /home/user-name/anaconda3/lib/python3.7/site-packages/pip (python 3.7)
However, I am confused when reading the instructions from this link:
https://conda.io/docs/user-guide/tasks/manage-pkgs.html#installing-non-conda-packages
On one hand it says: " Both pip and conda are included in Anaconda and Miniconda, so you do not need to install them separately." => That's the pip I can see in my commands above.
But on the other hand it says: " It is possible to have pip installed outside a conda environment or inside a conda environment. To gain the benefits of conda integration, be sure to install pip inside the currently active conda environment, and then install packages with that instance of pip. The command conda list shows packages installed this way, with a label showing that they were installed with pip.
So I'm confused:
I clearly got a version of pip when installing Anaconda and I can see in /home/user-name/anaconda3/bin
But if I want to use pip to install a package, I need to install pip in my environment using $ conda install pip and then $ pip install package (all of this in my normal Ubuntu terminal).
I don't understand how this makes sense..
Many thanks!
I am trying to figure out how to install packages for the first time. I have downloaded Python 2.7 with the Anaconda distribution. When I go to terminal and I type:
pip install pandas-datareader
I see a message that the package was installed successfully. However, when I enter:
import pandas-datareader as pdr
into Spyder, I get the error:
No module named pandas-datareader
I think this might be because I am not installing the package in the right directory. I also tried:
conda install -c anaconda pandas-datareader
and got the same result. I know there are many posts about installing packages, but I am looking for a super basic beginner explanation for how to troubleshoot this. What directory should I save packages in? How do I navigate to that directory? How do I use terminal to download the package into that directory, etc.
Conda installs any package to a conda environment and pip installs python packages to any environment. Your best bet is to create an environment and conda install to that. For example,
conda create -n py35
activate py35
conda install package_name
Typing these into the command line will set up your environment, activate it, and install whatever package you want.
After following your link, I got it to work by entering
!pip install pandas-datareader
in the Spyder Ipython console!
I try to install theano use conda install pip theano but always failed.
and I try to install using sudo, but when I try to import no module named theano.
you either use:
conda install theano
or
pip install theano
conda and pip are two distinct installers that you need to have on your machine first; pip comes with python; conda is a separate tool, usually installed with an anaconda distribution
To check if you have conda installed, type which conda in your terminal.
to update conda, type conda update conda