I'm using Python3 on Ubuntu 20.04 inside WSL2, running print(sys.executable) outputs /usr/bin/python3
Within VS Code, pressing "Select Interpreter" then "Enter Interpreter Path" I have tried both /usr/bin/python3 and the full windows path \\wsl$\Ubuntu/\usr\bin/python3 (which is reachable inside file explorer).
Both paths returns the error An Invalid Python interpreter is selected, please try changing it to enable features such as IntelliSense, linting, and debugging.
It seems to only accept an .exe file, how can I select the Linux path as the interpreter? Thanks.
It sounds like either:
You are starting VSCode from Windows, rather than from inside WSL
Or you don't have the WSL extension installed
Or both
There are several options for doing WSL development in VSCode, but all do require that you start by installing (if you haven't already) either:
The "Remote - WSL" extension
Or the "Remote Development" extension pack, which includes the former
Then, typically, you'll start VSCode by navigating to your project directory in WSL and:
code .
You'll see that VSCode has switched from "Windows" mode to "WSL" mode in the lower left-hand corner of the status-bar, where you should see "WSL: [distroname]".
With that in place, you should be able to select the Linux Python interpreter.
Alternatively, you can start VSCode through Windows, then switch to WSL mode with the stacked "><" icon in that same location on the status-bar. Or just enter the command-palette and "Remote-WSL: New WSL Window".
Context: Running python in VSCode on Windows
Default Terminal is Bash (via WSL)
Using WSL - Debian
Python 3 installed on Windows, not on WSL
I want Bash to call my Windows Python Executable when I run my python files. I am only using WSL so I can replace cmd/powershell with bash. I do not want to install anything on WSL, I want to use existing programs on Windows (in this case Python).
However when I try to run my Python file (Clicking 'play' button) I get the error:
-bash: C:/Users/Connor/AppData/Local/Programs/Python/Python310/python.exe: No such file or directory
I believe this can be solved by replacing C: with \mnt\c
How can I achieve this?
I had a same problem as yours. I solved this by following steps.
Open the VSCode
On your left-down side, you can see the the icon that I pointed enter image description here (the name in here is "Open a Remote Window")
Next you can see above the "Reopen Folder in WSL" enter image description here and clicked
Then you can run python with wsl and no more directory errors
I'm using Spyder 3 bundled with Anaconda Python on Ubuntu. Usually with other Python IDEs (like IDLE,...) when i want to work inside a specific folder, I just go to that folder then open a terminal, type "idle" and the IDE pops up, then I can work inside that folder.
But with Spyder when i open a terminal, type "spyder" , the Spyder IDE still works at the default directory! How can I change this? Please help me, thank you very much
You can change working directory after opening Spyder by typing inside IPython console cd path/to/working/dir.
EDIT:
I have found how you can set directory from the command line (from spyder3 --help). It is -w flag:
spyder3 -w path/to/dir
or
cd path/to/dir
spyder3 -w `pwd`
(Spyder maintainer here) The options to configure the current working directory are present in
Tools > Preferences > Current working directory.
We don't have a graphical way to sync that with the directory of the terminal from which Spyder was started, but there's a command line option to do it, as #Bartłomiej mentioned.
I recently downloaded the Anaconda distribution for Python. I noticed that if I write and execute a Python script (by double-clicking on its icon), my computer (running on Windows 8) will execute it using my old version of Python rather than Anaconda's version. So for example, if my script contains import matplotlib, I will receive an error. Is there a way to get my scripts to use Anaconda's version of Python instead?
I know that I can just open Anaconda's version of Python in the command prompt and manually import it, but I'd like to set things us so that I can just double-click on a .py file and Anaconda's version of Python is automatically used.
I know this is old, but none of the answers here is a real solution if you want to be able to double-click Python files and have the correct interpreter used without modifying your PYTHONPATH or PATH every time you want to use a different interpreter. Sure, from the command line, activate my-environment works, but OP specifically asked about double-clicking.
In this case, the correct thing to do is use the Python launcher for Windows. Then, all you have to do is add #! path\to\interpreter\python.exe to the top of your script. Unfortunately, although the launcher comes standard with Python 3.3+, it is not included with Anaconda (see Python & Windows: Where is the python launcher?), and the simplest thing to do is to install it separately from here.
Set your python path to the Anaconda version instead
Windows has a built-in dialog for changing environment variables (following guide applies to XP classical view): Right-click the icon for your machine (usually located on your Desktop and called “My Computer”) and choose Properties there. Then, open the Advanced tab and click the Environment Variables button.
In short, your path is:
My Computer ‣ Properties ‣ Advanced ‣ Environment Variables
In this dialog, you can add or modify User and System variables. To change System variables, you need non-restricted access to your machine (i.e. Administrator rights).
Find your PATH variable and add the location of your Anaconda directory.
Example of someone doing it here: How to add to the PYTHONPATH in Windows, so it finds my modules/packages? Make sure that you sub path out for the Anaconda file though.
The instructions in the official Python documentation worked for me: https://docs.python.org/2/using/windows.html#executing-scripts
Launch a command prompt.
Associate the correct file group with .py scripts:
assoc .py=Python.File
Redirect all Python files to the new executable:
ftype Python.File=C:\Path\to\pythonw.exe "%1" %*
The example shows how to associate the .py extension with the .pyw executable, but it works if you want to associate the .py extension with the Anaconda Python executable. You need administrative rights. The name "Python.File" could be anything, you just have to make sure is the same name in the ftype command. When you finish and before you try double-clicking the .py file, you must change the "Open with" in the file properties. The file type will be now ".py" and it is opened with the Anaconda python.exe.
I like to run a "bare-bones" version of Python 2 to verify scripts that I create for other people without an advanced python setup. But Anaconda and Python 3 have a lot of nice features. To enjoy both things on the same computer I do this on my Windows computer which allows me to easily switch.
C:\Users>python --version
Python 2.7.11
C:\Users>conda create --name p3 python=3
C:\Users>conda info --envs
Using Anaconda Cloud api site https://api.anaconda.org
# conda environments:
#
p3 C:\Anaconda3\envs\p3
root * C:\Anaconda3
C:\Users>activate p3
Deactivating environment "C:\Anaconda3"...
Activating environment "C:\Anaconda3\envs\p3"...
[p3] C:\Users>python --version
Python 3.5.1 :: Continuum Analytics, Inc.
For more info: http://conda.pydata.org/docs/test-drive.html
I know this is an old post, but I recently came across with the same problem. However, adding Anaconda to PYTHONPATH wasn't working for me. What got it fixed was the following:
Added Anaconda to the PYTHONPATH and remove any other distribution of Python from any paths.
Opened the command prompt and started python (Here I had to verify that it was indeed running under the Anaconda dist)
Ran the following lines inside anaconda
>>> import sys
>>> sys.path
['','C:\\Anaconda','C:\\Anaconda\\Scripts','C:\\Anaconda\\python27.zip','C:\\Anaconda\\DLLs','C:\\Anaconda\\lib','C:\\Anaconda\\lib\\plat-win','C:\\Anaconda\\lib\\lib-tk','C:\\Anaconda\\lib\\site-packages','C:\\Anaconda\\lib\\site-packages\\PIL','C:\\Anaconda\\lib\\site-packages\\Sphinx-1.2.3-py2.7.egg','C:\\Anaconda\\lib\\site-packages\\win32', 'C:\\Anaconda\\lib\\site-packages\\win32\\lib', 'C:\\Anaconda\\lib\\site-packages\\Pythonwin','C:\\Anaconda\\lib\\site-packages\\runipy-0.1.1-py2.7.egg','C:\\Anaconda\\lib\\site-packages\\setuptools-5.8-py2.7.egg']
Copied the displayed path
Within the script that I'm trying to execute on double click, changed the path to the previously copied one.
import sys
sys.path =['','C:\\Anaconda','C:\\Anaconda\\Scripts','C:\\Anaconda\\python27.zip','C:\\Anaconda\\DLLs','C:\\Anaconda\\lib','C:\\Anaconda\\lib\\plat-win','C:\\Anaconda\\lib\\lib-tk','C:\\Anaconda\\lib\\site-packages','C:\\Anaconda\\lib\\site-packages\\PIL','C:\\Anaconda\\lib\\site-packages\\Sphinx-1.2.3-py2.7.egg','C:\\Anaconda\\lib\\site-packages\\win32', 'C:\\Anaconda\\lib\\site-packages\\win32\\lib', 'C:\\Anaconda\\lib\\site-packages\\Pythonwin','C:\\Anaconda\\lib\\site-packages\\runipy-0.1.1-py2.7.egg','C:\\Anaconda\\lib\\site-packages\\setuptools-5.8-py2.7.egg']
Changed the default application for the script to 'python'
After doing this, my scripts are working on double click.
This solution is not perfectly answering the question because it modifies your .py file into a .bat file but it serves the save purpose, so I think it can help few people out there.
To launch a python script with anaconda's environment : change your .py extension into a .bat extension and add this command line in the beginning of your script :
#echo off & call conda activate <env name> & python -x "%~f0" %* & goto :eof
It will launch a .bat file that will activate your conda environment and execute your python script. This allows you to have a single file that you can copy/paste anywhere and just double click on it to launch it.
Here is an example of the content of the ".bat" file :
#echo off & call conda activate my_environment & python -x "%~f0" %* & goto :eof
print("Hello World!")
input()
import pandas as pd
print('succes')
input()
Hope this helps some people ! Cheers
Note:
If anaconda is not in yourr PATH environment variable, just replace :
conda activate with the path of anaconda activate .bat file, it should look like this C:\ProgramData\Anaconda3\Scripts\activate.bat.
You can also replace the environment name with it's directory, it often looks like that :
C:\Users\<user name>\.conda\envs\<environment name>
Many thanks to this post that helped me figure out this solution:
Python command line -x option
don't know windows 8 but you can probably set the default prog for a specific extension, for example on windows 7 you do right click => open with, then you select the prog you want and select 'use this prog as default', or you can remove your old version of python from your path and add the one of the anaconda
You can try to change the default .py program via policy management. Go to windows, search for regedit, right click it. And then run as administrator. Then, you can search the key word "python.exe" And change your Python27 path to you Anaconda path.
I know that this is an old question, but still there is no accepted answer.
Here is what I'm doing to start a python script with a double click in a specific anaconda environment.
I have found a very useful script in the anaconda3 folder cwp.py. This doesn't activate an environment, but it adds the environment prefix to the path.
You should use it as follow:
python cwp.py PREFIX ARGS
So actually, assuming that your anaconda installation is in C:\Users\User\anaconda3 and your environment is in C:\Users\User\anaconda3\env\myenv then what you have to do is to write the following line in a windows shortcut as a target:
C:\Users\User\anaconda3\pythonw.exe C:\Users\User\anaconda3\cwp.py C:\Users\User\anaconda3\env\myenv C:\Users\User\anaconda3\env\myenv\pythonw.exe path_to_your_script\your-script.py
A double click on the shortcut will start your script!
Is there a way to control what version of python is run when double clicking on a py file? From the command line and in environments such as eclipse I can control what version is run. But from double clicking I am not sure.
I have 2.6 and 2.7 installed. 2.6 is for some application specific stuff and I want to make 2.7 the default. I have added "C:\Python27" to the PATH environment variable and that works well at the command line. C:\path\to\some\file>python someFile.py will run the file in 2.7. But if I double click the same file from explorer it runs 2.6. How to get it to run 2.7?
On Windows, you have to modify the file associations, for example via Right Click → Open with ... → Choose default program or the Control Panel's Folder Settings. You can choose between multiple python installations by navigating to the python.exe you want via the Browse button:
Alternatively, you can change the association in a command shell by typing
ftype Python.File="C:\Python27\python.exe" "%1" %*
Note that this requires administrator rights. If UAC is enabled on your machine, right click cmd in the start menu and select Run as administrator.
On freedesktop.org-compatible desktops, you can configure the association with xdg-mime.
On debian-based distributions, you can change the default python with update-alternatives. On all systems, you can also symlink the python in your path to the correct implementation, like this:
$ sudo ln -sf python2.7 /usr/bin/python
If the file is marked executable, it can also be executed directly from the command line or GUI if it starts with #! and the name of the interpreter:
#!/usr/bin/env python
To choose a specific Python version just for your program, you can start your Python program with one of the following lines:
#!/usr/bin/env python2.7
#!/usr/bin/python2.7
OK I have found the Python Launcher, which does exactly what I am after. Download can be found here. Installing this gave me the option for "Python Launcher for Windows (GUI)" when changing the file association via the right click menu.
Adding the shebang line
#!/usr/bin/python2.7
forces the script to run in 2.7.
This works great as I can control what version of python is running and users never need to know. No need for bat files, or dragging onto shortcuts etc. Nice and clean, and most importantly, no room for user error.
You can use ASSOC and FTYPE
assoc .py=pyfile
ftype pyfile=c:\Python27\python.exe %1
You will find answer in answers to the following questions:
How to execute python scripts in windows?
Using older Python 2.x while having both Python 2.x and 3.x installed on Windows
Temporary file association for single cmd.exe session
How to write a batch file showing path to executable and version of Python handling Python scripts on Windows?