Related
I am using popen to run the following command on a windows vm
'tf changeset ...'
however when I run it using
commandLine = 'tf changeset /noprompt /latest /loginType:OAuth /login:.,***'
process = Popen(commandLine, shell=True, stdout=PIPE, stderr=PIPE)
I see the following being executed in the logs
'C:\Azure\Agent-1/externals/tf/tf changeset ...'
Meaning that 'C:\Azure\Agent-1/externals/tf/' has been prepended to my command. I was just expecting to see
'tf changeset ...'
Unfortunately adding the path to the execution breaks the command, is there any way to stop python from doing this?
Try passing the commandLine to Popen as a list of arguments:
commandLine = ["tf", "changeset", "/noprompt", "/latest", "/loginType:OAuth", "/login:.,***'"]
process = Popen(commandLine, stdout=PIPE, stderr=PIPE)
Python by itself does no such thing. Perhaps the shell=True is doing more than you hoped or bargained for? But we would need access to your shell's configuration to get beyond mere speculation around this.
Calling Popen on the result from Popen is obviously not well-defined; but perhaps this is just an error in your transcription of your real code?
Removing the first process =Popen( would fix this with minimal changes. As per the above, I would also remove shell=True as at least superfluous and at worst directly harmful.
commandLine = 'tf changeset /noprompt /latest /loginType:OAuth /login:.,***'
process = Popen(commandLine, stdout=PIPE, stderr=PIPE)
Like the subprocess documentation tells you, shell=True is only useful on Windows when your command is a cmd built-in.
For proper portability, you should break the command into tokens, manually or by way of shlex.split() if you are lazy or need the user to pass in a string to execute.
commandLine = ['tf ', 'changeset', '/noprompt', '/latest', '/loginType:OAuth', '/login:.,***']
process = Popen(commandLine, stdout=PIPE, stderr=PIPE)
This avoids the other dangers of shell=True and will be portable to non-Windows platforms (assuming of course that the command you are trying to run is available on the target platform).
Is there any way to use Popen with interactive commands? I mean nslookup, ftp, powershell... I read the whole subprocess documentation several times but I can't find the way.
What I have (removing the parts of the project which aren't of interest here) is:
from subprocess import call, PIPE, Popen
command = raw_input('>>> ')
command = command.split(' ')
process = Popen(command, stdout=PIPE, stderr=PIPE, shell=True)
execution = process.stdout.read()
error = process.stderr.read()
output = execution + error
process.stderr.close()
process.stdout.close()
print(output)
Basically, when I try to print the output with a command like dir, the output is a string, so I can work with the .read() on it. But when I try to use nslookup for example, the output isn't a string, so it can't be read, and the script enters in a deadlock.
I know that I can invoke nslookup in non-interactive mode, but that's not the point. I want to remove all the chances of a deadlock, and make it works with every command you can run in a normal cmd.
The real way the project works is through sockets, so the raw_input is a s.recv() and the output is sending back the output, but I have simplified it to focus on the problem.
I'm trying to write a Python script that starts a subprocess, and writes to the subprocess stdin. I'd also like to be able to determine an action to be taken if the subprocess crashes.
The process I'm trying to start is a program called nuke which has its own built-in version of Python which I'd like to be able to submit commands to, and then tell it to quit after the commands execute. So far I've worked out that if I start Python on the command prompt like and then start nuke as a subprocess then I can type in commands to nuke, but I'd like to be able to put this all in a script so that the master Python program can start nuke and then write to its standard input (and thus into its built-in version of Python) and tell it to do snazzy things, so I wrote a script that starts nuke like this:
subprocess.call(["C:/Program Files/Nuke6.3v5/Nuke6.3", "-t", "E:/NukeTest/test.nk"])
Then nothing happens because nuke is waiting for user input. How would I now write to standard input?
I'm doing this because I'm running a plugin with nuke that causes it to crash intermittently when rendering multiple frames. So I'd like this script to be able to start nuke, tell it to do something and then if it crashes, try again. So if there is a way to catch a crash and still be OK then that'd be great.
It might be better to use communicate:
from subprocess import Popen, PIPE, STDOUT
p = Popen(['myapp'], stdout=PIPE, stdin=PIPE, stderr=PIPE)
stdout_data = p.communicate(input='data_to_write')[0]
"Better", because of this warning:
Use communicate() rather than .stdin.write, .stdout.read or .stderr.read to avoid deadlocks due to any of the other OS pipe buffers filling up and blocking the child process.
To clarify some points:
As jro has mentioned, the right way is to use subprocess.communicate.
Yet, when feeding the stdin using subprocess.communicate with input, you need to initiate the subprocess with stdin=subprocess.PIPE according to the docs.
Note that if you want to send data to the process’s stdin, you need to create the Popen object with stdin=PIPE. Similarly, to get anything other than None in the result tuple, you need to give stdout=PIPE and/or stderr=PIPE too.
Also qed has mentioned in the comments that for Python 3.4 you need to encode the string, meaning you need to pass Bytes to the input rather than a string. This is not entirely true. According to the docs, if the streams were opened in text mode, the input should be a string (source is the same page).
If streams were opened in text mode, input must be a string. Otherwise, it must be bytes.
So, if the streams were not opened explicitly in text mode, then something like below should work:
import subprocess
command = ['myapp', '--arg1', 'value_for_arg1']
p = subprocess.Popen(command, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
output = p.communicate(input='some data'.encode())[0]
I've left the stderr value above deliberately as STDOUT as an example.
That being said, sometimes you might want the output of another process rather than building it up from scratch. Let's say you want to run the equivalent of echo -n 'CATCH\nme' | grep -i catch | wc -m. This should normally return the number characters in 'CATCH' plus a newline character, which results in 6. The point of the echo here is to feed the CATCH\nme data to grep. So we can feed the data to grep with stdin in the Python subprocess chain as a variable, and then pass the stdout as a PIPE to the wc process' stdin (in the meantime, get rid of the extra newline character):
import subprocess
what_to_catch = 'catch'
what_to_feed = 'CATCH\nme'
# We create the first subprocess, note that we need stdin=PIPE and stdout=PIPE
p1 = subprocess.Popen(['grep', '-i', what_to_catch], stdin=subprocess.PIPE, stdout=subprocess.PIPE)
# We immediately run the first subprocess and get the result
# Note that we encode the data, otherwise we'd get a TypeError
p1_out = p1.communicate(input=what_to_feed.encode())[0]
# Well the result includes an '\n' at the end,
# if we want to get rid of it in a VERY hacky way
p1_out = p1_out.decode().strip().encode()
# We create the second subprocess, note that we need stdin=PIPE
p2 = subprocess.Popen(['wc', '-m'], stdin=subprocess.PIPE, stdout=subprocess.PIPE)
# We run the second subprocess feeding it with the first subprocess' output.
# We decode the output to convert to a string
# We still have a '\n', so we strip that out
output = p2.communicate(input=p1_out)[0].decode().strip()
This is somewhat different than the response here, where you pipe two processes directly without adding data directly in Python.
Hope that helps someone out.
Since subprocess 3.5, there is the subprocess.run() function, which provides a convenient way to initialize and interact with Popen() objects. run() takes an optional input argument, through which you can pass things to stdin (like you would using Popen.communicate(), but all in one go).
Adapting jro's example to use run() would look like:
import subprocess
p = subprocess.run(['myapp'], input='data_to_write', capture_output=True, text=True)
After execution, p will be a CompletedProcess object. By setting capture_output to True, we make available a p.stdout attribute which gives us access to the output, if we care about it. text=True tells it to work with regular strings rather than bytes. If you want, you might also add the argument check=True to make it throw an error if the exit status (accessible regardless via p.returncode) isn't 0.
This is the "modern"/quick and easy way to do to this.
One can write data to the subprocess object on-the-fly, instead of collecting all the input in a string beforehand to pass through the communicate() method.
This example sends a list of animals names to the Unix utility sort, and sends the output to standard output.
import sys, subprocess
p = subprocess.Popen('sort', stdin=subprocess.PIPE, stdout=sys.stdout)
for v in ('dog','cat','mouse','cow','mule','chicken','bear','robin'):
p.stdin.write( v.encode() + b'\n' )
p.communicate()
Note that writing to the process is done via p.stdin.write(v.encode()). I tried using
print(v.encode(), file=p.stdin), but that failed with the message TypeError: a bytes-like object is required, not 'str'. I haven't figured out how to get print() to work with this.
You can provide a file-like object to the stdin argument of subprocess.call().
The documentation for the Popen object applies here.
To capture the output, you should instead use subprocess.check_output(), which takes similar arguments. From the documentation:
>>> subprocess.check_output(
... "ls non_existent_file; exit 0",
... stderr=subprocess.STDOUT,
... shell=True)
'ls: non_existent_file: No such file or directory\n'
I need to run a external exe file inside a python script. I need two things out of this.
Get whatever the exe outputs to the stdout (stderr).
exe stops executing only after I press the enter Key. I can't change this behavior. I need the script the pass the enter Key input after it gets the output from the previous step.
This is what I have done so far and I am not sure how to go after this.
import subprocess
first = subprocess.Popen(["myexe.exe"],shell=True,stdout=subprocess.PIPE)
from subprocess import Popen, PIPE, STDOUT
first = Popen(['myexe.exe'], stdout=PIPE, stderr=STDOUT, stdin=PIPE)
while first.poll() is None:
data = first.stdout.read()
if b'press enter to' in data:
first.stdin.write(b'\n')
first.stdin.close()
first.stdout.close()
This pipes stdin as well, do not forget to close your open file handles (stdin and stdout are also file handles in a sense).
Also avoid shell=True if at all possible, I use it a lot my self but best practices say you shouldn't.
I assumed python 3 here and stdin and stdout assumes bytes data as input and output.
first.poll() will poll for a exit code of your exe, if none is given it means it's still running.
Some other tips
one tedious thing to do can be to pass arguments to Popen, one neat thing to do is:
import shlex
Popen(shlex.split(cmd_str), shell=False)
It preserves space separated inputs with quotes around them, for instance python myscript.py debug "pass this parameter somewhere" would result in three parameters from sys.argv, ['myscript.py', 'debug', 'pass this parameter somewhere'] - might be useful in the future when working with Popen
Another thing that would be good is to check if there's output in stdout before reading from it, otherwise it might hang the application. To do this you could use select.
Or you could use pexpect which is often used with SSH since it lives in another user space than your application when it asks for input, you need to either fork your exe manually and read from that specific pid with os.read() or use pexpect.
I'm trying to write a Python script that starts a subprocess, and writes to the subprocess stdin. I'd also like to be able to determine an action to be taken if the subprocess crashes.
The process I'm trying to start is a program called nuke which has its own built-in version of Python which I'd like to be able to submit commands to, and then tell it to quit after the commands execute. So far I've worked out that if I start Python on the command prompt like and then start nuke as a subprocess then I can type in commands to nuke, but I'd like to be able to put this all in a script so that the master Python program can start nuke and then write to its standard input (and thus into its built-in version of Python) and tell it to do snazzy things, so I wrote a script that starts nuke like this:
subprocess.call(["C:/Program Files/Nuke6.3v5/Nuke6.3", "-t", "E:/NukeTest/test.nk"])
Then nothing happens because nuke is waiting for user input. How would I now write to standard input?
I'm doing this because I'm running a plugin with nuke that causes it to crash intermittently when rendering multiple frames. So I'd like this script to be able to start nuke, tell it to do something and then if it crashes, try again. So if there is a way to catch a crash and still be OK then that'd be great.
It might be better to use communicate:
from subprocess import Popen, PIPE, STDOUT
p = Popen(['myapp'], stdout=PIPE, stdin=PIPE, stderr=PIPE)
stdout_data = p.communicate(input='data_to_write')[0]
"Better", because of this warning:
Use communicate() rather than .stdin.write, .stdout.read or .stderr.read to avoid deadlocks due to any of the other OS pipe buffers filling up and blocking the child process.
To clarify some points:
As jro has mentioned, the right way is to use subprocess.communicate.
Yet, when feeding the stdin using subprocess.communicate with input, you need to initiate the subprocess with stdin=subprocess.PIPE according to the docs.
Note that if you want to send data to the process’s stdin, you need to create the Popen object with stdin=PIPE. Similarly, to get anything other than None in the result tuple, you need to give stdout=PIPE and/or stderr=PIPE too.
Also qed has mentioned in the comments that for Python 3.4 you need to encode the string, meaning you need to pass Bytes to the input rather than a string. This is not entirely true. According to the docs, if the streams were opened in text mode, the input should be a string (source is the same page).
If streams were opened in text mode, input must be a string. Otherwise, it must be bytes.
So, if the streams were not opened explicitly in text mode, then something like below should work:
import subprocess
command = ['myapp', '--arg1', 'value_for_arg1']
p = subprocess.Popen(command, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
output = p.communicate(input='some data'.encode())[0]
I've left the stderr value above deliberately as STDOUT as an example.
That being said, sometimes you might want the output of another process rather than building it up from scratch. Let's say you want to run the equivalent of echo -n 'CATCH\nme' | grep -i catch | wc -m. This should normally return the number characters in 'CATCH' plus a newline character, which results in 6. The point of the echo here is to feed the CATCH\nme data to grep. So we can feed the data to grep with stdin in the Python subprocess chain as a variable, and then pass the stdout as a PIPE to the wc process' stdin (in the meantime, get rid of the extra newline character):
import subprocess
what_to_catch = 'catch'
what_to_feed = 'CATCH\nme'
# We create the first subprocess, note that we need stdin=PIPE and stdout=PIPE
p1 = subprocess.Popen(['grep', '-i', what_to_catch], stdin=subprocess.PIPE, stdout=subprocess.PIPE)
# We immediately run the first subprocess and get the result
# Note that we encode the data, otherwise we'd get a TypeError
p1_out = p1.communicate(input=what_to_feed.encode())[0]
# Well the result includes an '\n' at the end,
# if we want to get rid of it in a VERY hacky way
p1_out = p1_out.decode().strip().encode()
# We create the second subprocess, note that we need stdin=PIPE
p2 = subprocess.Popen(['wc', '-m'], stdin=subprocess.PIPE, stdout=subprocess.PIPE)
# We run the second subprocess feeding it with the first subprocess' output.
# We decode the output to convert to a string
# We still have a '\n', so we strip that out
output = p2.communicate(input=p1_out)[0].decode().strip()
This is somewhat different than the response here, where you pipe two processes directly without adding data directly in Python.
Hope that helps someone out.
Since subprocess 3.5, there is the subprocess.run() function, which provides a convenient way to initialize and interact with Popen() objects. run() takes an optional input argument, through which you can pass things to stdin (like you would using Popen.communicate(), but all in one go).
Adapting jro's example to use run() would look like:
import subprocess
p = subprocess.run(['myapp'], input='data_to_write', capture_output=True, text=True)
After execution, p will be a CompletedProcess object. By setting capture_output to True, we make available a p.stdout attribute which gives us access to the output, if we care about it. text=True tells it to work with regular strings rather than bytes. If you want, you might also add the argument check=True to make it throw an error if the exit status (accessible regardless via p.returncode) isn't 0.
This is the "modern"/quick and easy way to do to this.
One can write data to the subprocess object on-the-fly, instead of collecting all the input in a string beforehand to pass through the communicate() method.
This example sends a list of animals names to the Unix utility sort, and sends the output to standard output.
import sys, subprocess
p = subprocess.Popen('sort', stdin=subprocess.PIPE, stdout=sys.stdout)
for v in ('dog','cat','mouse','cow','mule','chicken','bear','robin'):
p.stdin.write( v.encode() + b'\n' )
p.communicate()
Note that writing to the process is done via p.stdin.write(v.encode()). I tried using
print(v.encode(), file=p.stdin), but that failed with the message TypeError: a bytes-like object is required, not 'str'. I haven't figured out how to get print() to work with this.
You can provide a file-like object to the stdin argument of subprocess.call().
The documentation for the Popen object applies here.
To capture the output, you should instead use subprocess.check_output(), which takes similar arguments. From the documentation:
>>> subprocess.check_output(
... "ls non_existent_file; exit 0",
... stderr=subprocess.STDOUT,
... shell=True)
'ls: non_existent_file: No such file or directory\n'