We Keep Coding

How to match and replace this pattern in Python RE?

s = "[abc]abx[abc]b"
s = re.sub("\[([^\]]*)\]a", "ABC", s)
'ABCbx[abc]b'
In the string, s, I want to match 'abc' when it's enclosed in [], and followed by a 'a'. So in that string, the first [abc] will be replaced, and the second won't.
I wrote the pattern above, it matches:
match anything starting with a '[', followed by any number of characters which is not ']', then followed by the character 'a'.
However, in the replacement, I want the string to be like:
[ABC]abx[abc]b . // NOT ABCbx[abc]b
Namely, I don't want the whole matched pattern to be replaced, but only anything with the bracket []. How to achieve that?
match.group(1) will return the content in []. But how to take advantage of this in re.sub?

Why not simply include [ and ] in the substitution?
s = re.sub("\[([^\]]*)\]a", "[ABC]a", s)

There exist more than 1 method, one of them is exploting groups.
import re
s = "[abc]abx[abc]b"
out = re.sub('(\[)([^\]]*)(\]a)', r'\1ABC\3', s)
print(out)
Output:
[ABC]abx[abc]b
Note that there are 3 groups (enclosed in brackets) in first argument of re.sub, then I refer to 1st and 3rd (note indexing starts at 1) so they remain unchanged, instead of 2nd group I put ABC. Second argument of re.sub is raw string, so I do not need to escape \.

This regex uses lookarounds for the prefix/suffix assertions, so that the match text itself is only "abc":
(?<=\[)[^]]*(?=\]a)
Example: https://regex101.com/r/NDlhZf/1
So that's:
(?<=\[) - positive look-behind, asserting that a literal [ is directly before the start of the match
[^]]* - any number of non-] characters (the actual match)
(?=\]a) - positive look-ahead, asserting that the text ]a directly follows the match text.

Match everything except a pattern and replace matched with string

I want to use python in order to manipulate a string I have.
Basically, I want to prepend"\x" before every hex byte except the bytes that already have "\x" prepended to them.
My original string looks like this:
mystr = r"30336237613131\x90\x01\x0A\x90\x02\x146F6D6D616E64\x90\x01\x06\x90\x02\x0F52656C6174\x90\x01\x02\x90\x02\x50656D31\x90\x00"
And I want to create the following string from it:
mystr = r"\x30\x33\x62\x37\x61\x31\x31\x90\x01\x0A\x90\x02\x14\x6F\x6D\x6D\x61\x6E\x64\x90\x01\x06\x90\x02\x0F\x52\x65\x6C\x61\x74\x90\x01\x02\x90\x02\x50\x65\x6D\x31\x90\x00"
I thought of using regular expressions to match everything except /\x../g and replace every match with "\x". Sadly, I struggled with it a lot without any success. Moreover, I'm not sure that using regex is the best approach to solve such case.

Regex: (?:\\x)?([0-9A-Z]{2}) Substitution: \\x$1
Details:
(?:) Non-capturing group
? Matches between zero and one time, match string \x if it exists.
() Capturing group
[] Match a single character present in the list 0-9 and A-Z
{n} Matches exactly n times
\\x String \x
$1 Group 1.
Python code:
import re
text = R'30336237613131\x90\x01\x0A\x90\x02\x146F6D6D616E64\x90\x01\x06\x90\x02\x0F52656C6174\x90\x01\x02\x90\x02\x50656D31\x90\x00'
text = re.sub(R'(?:\\x)?([0-9A-Z]{2})', R'\\x\1', text)
print(text)
Output:
\x30\x33\x62\x37\x61\x31\x31\x90\x01\x0A\x90\x02\x14\x6F\x6D\x6D\x61\x6E\x64\x90\x01\x06\x90\x02\x0F\x52\x65\x6C\x61\x74\x90\x01\x02\x90\x02\x50\x65\x6D\x31\x90\x00
Code demo

You don't need regex for this. You can use simple string manipulation. First remove all of the "\x" from your string. Then add add it back at every 2 characters.
replaced = mystr.replace(r"\x", "")
newstr = "".join([r"\x" + replaced[i*2:(i+1)*2] for i in range(len(replaced)/2)])
Output:
>>> print(newstr)
\x30\x33\x62\x37\x61\x31\x31\x90\x01\x0A\x90\x02\x14\x6F\x6D\x6D\x61\x6E\x64\x90\x01\x06\x90\x02\x0F\x52\x65\x6C\x61\x74\x90\x01\x02\x90\x02\x50\x65\x6D\x31\x90\x00

You can get a list with your values to manipulate as you wish, with an even simpler re pattern
mystr = r"30336237613131\x90\x01\x0A\x90\x02\x146F6D6D616E64\x90\x01\x06\x90\x02\x0F52656C6174\x90\x01\x02\x90\x02\x50656D31\x90\x00"
import re
pat = r'([a-fA-F0-9]{2})'
match = re.findall(pat, mystr)
if match:
print('\n\nNew string:')
print('\\x' + '\\x'.join(match))
#for elem in match: # match gives you a list of strings with the hex values
# print('\\x{}'.format(elem), end='')
print('\n\nOriginal string:')
print(mystr)

This can be done without replacing existing \x by using a combination of positive lookbehinds and negative lookaheads.
(?!(?<=\\x)|(?<=\\x[a-f\d]))([a-f\d]{2})
Usage
See code in use here
import re
regex = r"(?!(?<=\\x)|(?<=\\x[a-f\d]))([a-f\d]{2})"
test_str = r"30336237613131\x90\x01\x0A\x90\x02\x146F6D6D616E64\x90\x01\x06\x90\x02\x0F52656C6174\x90\x01\x02\x90\x02\x50656D31\x90\x00"
subst = r"\\x$1"
result = re.sub(regex, subst, test_str, 0, re.IGNORECASE)
if result:
print (result)
Explanation
(?!(?<=\\x)|(?<=\\x[a-f\d])) Negative lookahead ensuring either of the following doesn't match.
(?<=\\x) Positive lookbehind ensuring what precedes is \x.
(?<=\\x[a-f\d]) Positive lookbehind ensuring what precedes is \x followed by a hexidecimal digit.
([a-f\d]{2}) Capture any two hexidecimal digits into capture group 1.

Split string at capital letter but only if no whitespace

Set-up
I've got a string of names which need to be separated into a list.
Following this answer, I have,
string = 'KreuzbergLichtenbergNeuköllnPrenzlauer Berg'
re.findall('[A-Z][a-z]*', string)
where the last line gives me,
['Kreuzberg', 'Lichtenberg', 'Neuk', 'Prenzlauer', 'Berg']
Problems
1) Whitespace is ignored
'Prenzlauer Berg' is actually 1 name but the code splits according to the 'split-at-capital-letter' rule.
What is the command ensuring it to not split at a capital letter if preceding character is a whitespace?
2) Special characters not handled well
The code used cannot handle 'ö'. How do I include such 'German' characters?
I.e. I want to obtain,
['Kreuzberg', 'Lichtenberg', 'Neukölln', 'Prenzlauer Berg']

You can use positive and negative lookbehind and just list the Umlauts explicitly:
>>> string = 'KreuzbergLichtenbergNeuköllnPrenzlauer Berg'
>>> re.findall('(?<!\s)[A-ZÄÖÜ](?:[a-zäöüß\s]|(?<=\s)[A-ZÄÖÜ])*', string)
['Kreuzberg', 'Lichtenberg', 'Neukölln', 'Prenzlauer Berg']
(?<!\s)...: matches ... that is not preceded by \s
(?<=\s)...: matches ... that is preceded by \s
(?:...): non-capturing group so as to not mess with the findall results

This works
string="KreuzbergLichtenbergNeuköllnPrenzlauer Berg"
pattern="[A-Z][a-ü]+\s[A-Z][a-ü]+|[A-Z][a-ü]+"
re.findall(pattern, string)
#>>>['Kreuzberg', 'Lichtenberg', 'Neukölln', 'Prenzlauer Berg']

Regex replace with negative look ahead in Python

I am trying to delete the single quotes surrounding regular text. For example, given the list:
alist = ["'ABC'", '(-inf-0.5]', '(4800-20800]', "'\\'(4.5-inf)\\''", "'\\'(2.75-3.25]\\''"]
I would like to turn "'ABC'" into "ABC", but keep other quotes, that is:
alist = ["ABC", '(-inf-0.5]', '(4800-20800]', "'\\'(4.5-inf)\\''", "'\\'(2.75-3.25]\\''"]
I tried to use look-head as below:
fixRepeatedQuotes = lambda text: re.sub(r'(?<!\\\'?)\'(?!\\)', r'', text)
print [fixRepeatedQuotes(str) for str in alist]
but received error message:
sre_constants.error: look-behind requires fixed-width pattern.
Any other workaround? Thanks a lot in advance!

Try should work:
result = re.sub("""(?s)(?:')([^'"]+)(?:')""", r"\1", subject)
explanation
"""
(?: # Match the regular expression below
' # Match the character “'” literally (but the ? makes it a non-capturing group)
)
( # Match the regular expression below and capture its match into backreference number 1
[^'"] # Match a single character NOT present in the list “'"” from this character class (aka any character matches except a single and double quote)
+ # Between one and unlimited times, as many times as possible, giving back as needed (greedy)
)
(?: # Match the regular expression below
' # Match the character “'” literally (but the ? makes it a non-capturing group)
)
"""

re.sub accepts a function as the replace text. Therefore,
re.sub(r"'([A-Za-z]+)'", lambda match: match.group(), "'ABC'")
yields
"ABC"

Split with single colon but not double colon using regex

I have a string like this
"yJdz:jkj8h:jkhd::hjkjh"
I want to split it using colon as a separator, but not a double colon. Desired result:
("yJdz", "jkj8h", "jkhd::hjkjh")
I'm trying with:
re.split(":{1}", "yJdz:jkj8h:jkhd::hjkjh")
but I got a wrong result.
In the meanwhile I'm escaping "::", with string.replace("::", "$$")

You could split on (?<!:):(?!:). This uses two negative lookarounds (a lookbehind and a lookahead) which assert that a valid match only has one colon, without a colon before or after it.
To explain the pattern:
(?<!:) # assert that the previous character is not a colon
: # match a literal : character
(?!:) # assert that the next character is not a colon
Both lookarounds are needed, because if there was only the lookbehind, then the regular expression engine would match the first colon in :: (because the previous character isn't a colon), and if there was only the lookahead, the second colon would match (because the next character isn't a colon).

You can do this with lookahead and lookbehind, if you want:
>>> s = "yJdz:jkj8h:jkhd::hjkjh"
>>> l = re.split("(?<!:):(?!:)", s)
>>> print l
['yJdz', 'jkj8h', 'jkhd::hjkjh']
This regex essentially says "match a : that is not followed by a : or preceded by a :"