It seems to be common practice to set up a Python virtual environment using some variant of the following:
python -m venv venv && source ./venv/bin/activate
python -m pip install -U pip -r requirements.txt
What I hope the above command does is:
Upgrade pip first
Run the installation of the packages in requirements.txt
However, what actually seems to happen is:
Collects all packages, including newest version of pip
Installs them all together
The original/outdated version of pip is what actually runs the installs
And the new version of pip is not used until after this command
Question(s)
Is it possible to have pip upgrade itself and then install a requirements file, in one command?
Would this infer any particular benefits?
Should I switch to the following?
python -m venv venv && source ./venv/bin/activate
python -m pip install -U pip
python -m pip install -r requirements.txt
What is the optimal method to install requirements files?
I see people sometimes installing/upgrading wheel and setuptools as well
The answers to your questions are:
No. pip doesn't currently treat itself as a special dependency, so it doesn't know to install then execute itself, which is what it would need to do to overcome the problems you observed.
Updating pip in a separate step is indeed the recommended way to proceed.
You may from time to time see pip issue a message advising that a newer version is available. This happens a lot if you create them from a python with an outdated pip.
I had a situation similar to yours, I needed to first upgrade pip and then install a bunch of libraries in a lab that had 20 PCs. What I did was writing all the librarie's name in a requirements.txt file, then create a .bat file with two commands:
`python -m pip install --upgrade pip`
`pip install -r requirements.txt`
The first command for upgrading pip and the second one for installing all the libraries listed in the requirements.txt file.
I'd like to do something like pip install requests --save packages.txt so I could have list of all I used and later I could just pip -r install packages.txt when I clone it from repository.
you can use freeze to dump all the installations to your .txt file as:
pip freeze > requirements.txt
And, you can run following later when needed :
pip install -r requirements.txt
pip install package --download="path to directory"
pip install --no-index --find-links="path to directory" package_name
Note: pip download replaces the --download option to pip install, which is now deprecated and will be removed in pip 10.
I looked up how to install multiple packages from a requirements document using pip. The answers were mostly:
pip install -r requirements.txt
What does the -r do though? I can't find an answer for this and it isn't listed when I run pip help.
Instead of pip --help, look into pip install --help:
-r, --requirement Install from the given requirements
file. This option can be used multiple
times.
Also see these documentation paragraphs:
pip install
Requirements Files.
-r will search for requirement file.
pip install --help
will help you !!
May, 2022 Update:
If you run this command below without "-r":
pip install requirements.txt
You will get this error below:
ERROR: Could not find a version that satisfies the requirement requirements.txt (from versions: none)
HINT: You are attempting to install a package literally named "requirements.txt" (which cannot exist). Consider using the '-r' flag to install the packages listed in requirements.txt
ERROR: No matching distribution found for requirements.txt
Because "pip" tries to install the package "requirements.txt" instead of installing the packages listed in "requirements.txt". Of cource, the package "requirements.txt" doesn't exist in PyPI while for example, the packages "django" and "pillow" exist in PyPI:
pip install django
pip install pillow
So, to install the packages listed in "requirements.txt", you must need "-r";
pip install -r requirements.txt
You can check what "-r" means by running the command below:
pip install --help
-r, --requirement Install from the given requirements file. This option can be used multiple times.
In your case pip install -r requirements.txt will install the libraries listed in your requirements.txt file.
pip install requirements.txt
Above statement looks for a python package named requirements.txt. No such package exists. Your intention is that pip install opens the txt and reads the packages from there. The -r allows pip install to open requirements.txt and install the packages inside of it instead.
How do I upgrade all my python packages from requirements.txt file using pip command?
tried with below command
$ pip install --upgrade -r requirements.txt
Since, the python packages are suffixed with the version number (Django==1.5.1) they don't seem to upgrade. Is there any better approach than manually editing requirements.txt file?
EDIT
As Andy mentioned in his answer packages are pinned to a specific version, hence it is not possible to upgrade packages through pip command.
But, we can achieve this with pip-tools using the following command.
$ pip-review --auto
this will automatically upgrade all packages from requirements.txt (make sure to install pip-tools using pip install command).
I already answered this question here. Here's my solution:
Because there was no easy way for upgrading package by package, and updating the requirements.txt file, I wrote this pip-upgrader which also updates the versions in your requirements.txt file for the packages chosen (or all packages).
Installation
pip install pip-upgrader
Usage
Activate your virtualenv (important, because it will also install the new versions of upgraded packages in current virtualenv).
cd into your project directory, then run:
pip-upgrade
Advanced usage
If the requirements are placed in a non-standard location, send them as arguments:
pip-upgrade path/to/requirements.txt
If you already know what package you want to upgrade, simply send them as arguments:
pip-upgrade -p django -p celery -p dateutil
If you need to upgrade to pre-release / post-release version, add --prerelease argument to your command.
Full disclosure: I wrote this package.
you can try:
pip install --upgrade --force-reinstall -r requirements.txt
You can also ignore installed package and install the new one :
pip install --ignore-installed -r requirements.txt
No. Your requirements file has been pinned to specific versions. If your requirements are set to that version, you should not be trying to upgrade beyond those versions. If you need to upgrade, then you need to switch to unpinned versions in your requirements file.
Example:
lxml>=2.2.0
This would upgrade lxml to any version newer than 2.2.0
lxml>=2.2.0,<2.3.0
This would upgrade lxml to the most recent version between 2.2.0 and 2.3.0.
I suggest freezing all of your dependencies in order to have predictable builds.
When doing that, you can update all dependencies at once like this:
sed -i '' 's/[~=]=/>=/' requirements.txt
pip install -U -r requirements.txt
pip freeze | sed 's/==/~=/' > requirements.txt
Having done the above, test your project with the new set of packages and eventually commit the requirements.txt file to the repository while still allowing for installing hot-fixes.
Another solution is to use the upgrade-requirements package
pip install upgrade-requirements
And then run :
upgrade-requirements
It will upgrade all the packages that are not at their latest versions, and also create an updated requirements.txt at the end.
Fixing dependencies to a specific version is the recommended practice.
Here's another solution using pur to keep the dependencies fresh!
Give pur your requirements.txt file and it will auto update all your high-level packages to the latest versions, keeping your original formatting and comments in-place.
For example, running pur on the example requirements.txt updates the packages to the currently available latest versions:
$ pur -r requirements.txt
Updated flask: 0.9 -> 0.10.1
Updated sqlalchemy: 0.9.10 -> 1.0.12
Updated alembic: 0.8.4 -> 0.8.6
All requirements up-to-date.
As pur never modifies your environment or installed packages, it's extremely fast and you can safely run it without fear of corrupting your local virtual environment. Pur separates updating your requirements.txt file from installing the updates. So you can use pur, then install the updates in separate steps.
I've just had to do the same... used this small one-liner to do the job:
packages=$(cat requirements.txt | sed 's/==.*//g'); echo $packages | xargs pip3 install -U; freeze=$(pip3 freeze); for p in $(echo $packages); do echo $freeze | grep -E "^${p}==" >> requirements.new; done
which:
packages=$(cat requirements.txt | sed 's/==.*//g') creates a list of the current packages names in requirements.txt (removing the version).
echo $packages | xargs pip3 install -U then passes all of the packages as arguments to pip3 to upgrade.
freeze=$(pip3 freeze); Gets all of the current package versions in the format required for requirements.txt
for p in $(echo $packages) then iterates through the package names
echo $freeze | grep -E "^${p}==" >> requirements.new gets the package version line from the pip freeze output which matches the package and writes to new requirements.txt
This has the added benefit of preserving the ordering of the original requirements.txt. :)
Hope this helps!
The second answer is the most useful but what I wanted to do is lock some packages while having others at the latest version (e.g. youtube-dl).
An example requirements.txt would look like this (~ means compatible):
Pillow==6.2.2
requests~=2.22.0
youtube_dl
Then in the terminal, use the command pip install --upgrade -r requirements.txt
This ensures that Pillow will stay at 6.2.2, requests will be upgraded to the latest 2.22.x (if available), and the latest version of youtube-dl will be installed if not already.
Since I couldn't do that using bash, I wrote a python module to create a new requirements file with no versions and use it:
data = open('requirements-prod.pip', 'r')
data2 = open('requirements-prod-no-version.pip', 'w')
for line in data.readlines():
new_line = line[:line.index('==')]
data2.write(new_line + '\n')
data2.flush()
Then install the libs from the new file pip install -U -r requirements-prod-no-version.pip
Finally freeze the versions to the original file pip freeze > requirements-prod.pip
More robust solution is IMO to use a dependency management such as poetry, https://python-poetry.org which comes with an exhaustive dependency resolver.
I guess the simplest solution is creating the requirements.txt with:
pip freeze | sed 's/==/>=/' > requirements.txt
You can use below command on Linux and Mac:
cat requirements.txt | cut -f1 -d= | xargs pip install -U
1) To upgrade pip installed files from reqs.txt
add the >= in replacement of ==
this will tell pip to install lib greater than or equal to the version you are requesting, here by installing the most to-date version of requested library
1.a) **My answer for thread ** By adding py -m pip install -r reqs.txt to a daily restart... or something of the nature you can update your installed libs.
Summed up by Andy Perfectly
-My reason For entering this thread was to find information on how to update virtual env base pip (usually 10.0.03 for me??)
in-hopes of satisfying an issue of which have I was able to derive one of two solutions
A. creation of venv || B. Installation of Required libs
Thanks to Andy I have satisfied need B
By adding pip >= requested version in reqs.txt
upon instantiation of new virtual-Environment || re-instantiation of previous Venv
py -m venv devenv
to setup new dev env
devenv\scripts\activate.bat
to activate dev env
python -m pip install -r requirenments.txt
to install base libs
yeilds output
Collecting pip >= 20.0.2 (from -r requirenments.txt (line 1))
Using cached >https://files.pythonhosted.org/packages/54/0c/d01aa759fdc501a58f431eb594a17495f15b88da142ce14b5845662c13f3/pip-20.0.2-py2.py3-none-any.whl
Found existing installation: pip 10.0.1
Uninstalling pip-10.0.1:
Successfully uninstalled pip-10.0.1
Successfully installed pip-20.0.2
Sorry for the Brain Dump, Hopes this helps someone :)
🤳 Austin 👨🎤🚀🥊
If you install anything in your django project and after installation you want to update your requirement file this command can update you requirement.txt file
pip freeze > requirements.txt
if your requirement file not exist in you project you can use this command for make new requirement.txt file
pip freeze > requirements.txt
With pip-tools you have a basic requirements.in with desired dependencies and a requirements.txt file with pinned versions. pip-tools then generates the pinned versions automatically, which makes handling the whole process including upgrading your dependencies a lot easier.
# requirements.in
django
and the autogenerated requirements.txt (to pin all dependencies)
$ pip-compile requirements.in
#
# This file is autogenerated by pip-compile
# To update, run:
#
# pip-compile requirements.in
#
asgiref==3.2.3
# via django
django==3.0.3
# via -r requirements.in
pytz==2019.3
# via django
sqlparse==0.3.0
# via django
If you use that workflow, which I can highly recommend, it's
pip-compile --upgrade
which generates the requirements.txt with the latest versions.
I edit the requirements.txt as below and run $sh ./requirements.txt
pip install -U amqp;
pip install -U appdirs;
pip install -U arrow;
pip install -U Babel;
pip install -U billiard;
pip install -U celery;
pip install -U Django;
pip install -U django-cors-headers;
pip install -U django-crispy-forms;
pip install -U django-filter;
pip install -U django-markdown-deux;
pip install -U django-pagedown;
pip install -U django-timezone-field;
pip install -U djangorestframework;
pip install -U fcm-django;
pip install -U flower;
pip install -U gunicorn;
pip install -U kombu;
pip install -U Markdown;
pip install -U markdown2;
pip install -U packaging;
my requirements file is like that :
https://github.com/sontek/pyramid_webassets/archive/38b0b9f9f4e36dc22b3a5c10eabf4d9228d97740.zip#egg=pyramid_webassets-0.0
https://github.com/miracle2k/webassets/archive/334d55c6bcfd091cb2d984777daf943acde0d364.zip#egg=webassets-0.8.dev
when running pip install -r requirements.txt I want it to install the specific version of pyramid_webassets, and then the specific webassets version (0.8.dev)
the problem is that pyramid_webassets have the webassets as sub-dependency, and it installs the latest of this package.
so the output of pip freeze is
Chameleon==2.14
Mako==0.9.1
MarkupSafe==0.18
PasteDeploy==1.5.2
WebOb==1.3.1
argparse==1.2.1
pyramid==1.4.5
pyramid-webassets==0.0
repoze.lru==0.6
translationstring==1.1
venusian==1.0a8
webassets==0.9
wsgiref==0.1.2
zope.deprecation==4.1.0
zope.interface==4.0.5
you might notice that webassets version is the latest (0.9) though I specified the version I want (0.8.dev).
I tried to reorder the list, adding the --upgrade flag- nothing helped.
any idea how can I install it and still having the required version of webassets?
Thanks.
soultion:
I found this commend useful:
cat requirements.txt | xargs -L1 pip install
that will install one by one the packages orderly
but we should add --upgrade for the last package so it'll upgrade it.
use pip install option to not install package dependencies
$ pip install --no-deps -r requirements.txt
Doing a pip freeze afterwards
gottfried#sascha-Latitude-XT2:~/venv$ bin/pip freeze
argparse==1.2.1
pyramid-webassets==0.0
webassets==0.8.dev
wsgiref==0.1.2
References
pip cookbook - Ensuring repeatability
What happens when you move webassets higher then pyramid_webassets on the list?