Say I have this time
00:46:19,870
where it represents 46h 19m and 870 is 870/1000 of a minute (I think I can just get rid of the last part). How do I convert this to seconds?
I've tried
time.strptime('00:46:19,870'.split(',')[0],'%H:%M:%S')
but realized that it wouldn't work as it's using a format different than mine.
How can I convert 00:46:19,870 to 2779?
You are close, you can still use the datetime you just need to calculate the time delta. What you really have isn't really a date but what appears to be a stopwatch time time. You can still strip the time from that and you will notice that Python uses a default year, month, and day. You can use that default to figure out the delta in seconds:
from datetime import datetime
DEFAULT_DATE = (1900, 1, 1)
stopwatch = datetime.strptime('00:46:19,870', '%H:%M:%S,%f')
a_timedelta = stopwatch - datetime(*DEFAULT_DATE)
seconds = a_timedelta.total_seconds()
print(seconds)
I am testing the difference between an actual UTC time and timestamp when my object was saved in a table (UTC). It must be not more than 60 seconds.
Example of timestamp_from_table (string from my site): 2021-02-05 13:51:52
After researching for options to make this, I came to this approach:
timestamp_from_table = driver.find_element_by_css_selector("my_locator").text
current_time = time.strftime('%Y-%m-%d %H:%M:%S', time.gmtime()) # current time converted to string
current_time_truncated = datetime.strptime(current_time, "%Y-%m-%d %H:%M:%S") # cutting milliseconds
date_time_obj = datetime.strptime(timestamp_from_table, '%Y-%m-%d %H:%M:%S') # converting string timestamp to a datetime object
time_difference = current_time_truncated - date_time_obj
result = time_difference.seconds # datetime.timedelta represented in seconds
assert result in range(1, 60), error()
It works just fine, but probably there is a shorter way to compare a difference between a timestamp saved as string and actual utc timestamp. Thanks for any advice.
I'm reading between the lines a bit, but it sounds like at a high level your goal is to calculate the elapsed seconds between two times. If I'm right about that, here is a typical way to do it in Python:
import datetime
import time
previous = datetime.datetime.now()
time.sleep(5) # Added to simulate the passing of time for demonstration purposes
current = datetime.datetime.now()
elapsed_seconds = (current - previous) / datetime.timedelta(seconds=1)
"Division" by timedelta is the key to getting elapsed seconds (or any other time unit) between two datetime objects. While not UTC specific hopefully this shines a light on an approach that works for you.
This is my code that I tried to use but it doesn't work since it's a string
from datetime import datetime
now = datetime.now()
current_time = now.strftime("%H:%M")
print("time=", current_time)
wake_up=0
x=current_time - wake_up - 0.40
wake_up = float(input("when are you gonna wake up"))
print(x)
I am trying to make a calculator where as it prints the current time. (for example 23:00) and then the input asks what time are you going to wake up and you write (for example 08:30) and the output should be "You will get 09:30 hours and minutes of sleep" or preferably "You will get 9 hours and 30 minutes of sleep"
I tried to do this but it is a string and cannot be calculated and I tried to find an integer version of the now.strftime module. Can someone help me find out how to do this?
You'll need to use datetime.strptime(), which takes in a date string and a format string (reference here) and converts the string to a datetime object.
In your case, you would use the following to convert wake_up to a datetime object:
dt = datetime.strptime(wake_up, "%H:%M")
Modifications done based on your code:
from datetime import datetime, date
now_time = datetime.now().time() # get time only
current_time_str = now.strftime("%H:%M")
print("time=", current_time_str)
#wake_up = input("when are you gonna wake up")
wake_up = '08:30' # assuming this is user input
wake_up_time = datetime.strptime(wake_up, "%H:%M").time()
x = datetime.combine(date.today(), wake_up_time) - datetime.combine(date.today(), now_time)
print(str(x)) #also, you can get hours by x.seconds/3600
Other questions will help you.
Python speed testing - Time Difference - milliseconds
Converting string into datetime
subtract two times in python
Format timedelta to string
I have two date time objects
`statrt_time` and `end_time`
my code is
if self.book_from and self.book_to:
fmt = '%Y-%m-%d %H:%M:%S'
s = datetime.strptime(self.book_from,fmt) #start date
e = datetime.strptime(self.book_to,fmt) #end date
diff = e - s
total_seconds=diff.seconds
time_diff = (total_seconds/3600.0)
no_of_units = (time_diff/4)
if(e<s):
self.units = 0
else:
self.units = math.ceil(no_of_units)
Here when I subtract time within the same day it is giving the correct difference. But when the day is changed, it is not calculating the day difference but only giving time difference. How can I add day difference also?
Use total_seconds() instead of seconds.
timedelta.seconds just shows "second" part of the difference, while total_seconds() shows the duration of the difference in seconds. See Mureinik's answer for more details.
So, use this:
total_seconds=diff.total_seconds()
total_seconds is a timedelta object which stores the difference between two datetimes using three fields - days, seconds and miliseconds. Your snippet just uses the seconds attributes instead of the entire difference. The total_seconds() method takes care of this for you and returns, well, the total number of seconds between two datatimes.
I got another way of doing.. BUT A WORK AROUND..
if self.book_from and self.book_to:
fmt = '%Y-%m-%d %H:%M:%S'
s = datetime.strptime(self.book_from,fmt) #start date
e = datetime.strptime(self.book_to,fmt) #end date
diff = e - s
days=diff.days// convert difference to day instead of seconds//
days_seconds=0
if(days>0): //Checking whether the difference exceeds a day//
days_seconds=days*24*3600 //If so convert it to seconds//
total_seconds=diff.seconds+days_seconds
time_diff = (total_seconds/3600.0)
I have two times, a start and a stop time, in the format of 10:33:26 (HH:MM:SS). I need the difference between the two times. I've been looking through documentation for Python and searching online and I would imagine it would have something to do with the datetime and/or time modules. I can't get it to work properly and keep finding only how to do this when a date is involved.
Ultimately, I need to calculate the averages of multiple time durations. I got the time differences to work and I'm storing them in a list. I now need to calculate the average. I'm using regular expressions to parse out the original times and then doing the differences.
For the averaging, should I convert to seconds and then average?
Yes, definitely datetime is what you need here. Specifically, the datetime.strptime() method, which parses a string into a datetime object.
from datetime import datetime
s1 = '10:33:26'
s2 = '11:15:49' # for example
FMT = '%H:%M:%S'
tdelta = datetime.strptime(s2, FMT) - datetime.strptime(s1, FMT)
That gets you a timedelta object that contains the difference between the two times. You can do whatever you want with that, e.g. converting it to seconds or adding it to another datetime.
This will return a negative result if the end time is earlier than the start time, for example s1 = 12:00:00 and s2 = 05:00:00. If you want the code to assume the interval crosses midnight in this case (i.e. it should assume the end time is never earlier than the start time), you can add the following lines to the above code:
if tdelta.days < 0:
tdelta = timedelta(
days=0,
seconds=tdelta.seconds,
microseconds=tdelta.microseconds
)
(of course you need to include from datetime import timedelta somewhere). Thanks to J.F. Sebastian for pointing out this use case.
Try this -- it's efficient for timing short-term events. If something takes more than an hour, then the final display probably will want some friendly formatting.
import time
start = time.time()
time.sleep(10) # or do something more productive
done = time.time()
elapsed = done - start
print(elapsed)
The time difference is returned as the number of elapsed seconds.
Here's a solution that supports finding the difference even if the end time is less than the start time (over midnight interval) such as 23:55:00-00:25:00 (a half an hour duration):
#!/usr/bin/env python
from datetime import datetime, time as datetime_time, timedelta
def time_diff(start, end):
if isinstance(start, datetime_time): # convert to datetime
assert isinstance(end, datetime_time)
start, end = [datetime.combine(datetime.min, t) for t in [start, end]]
if start <= end: # e.g., 10:33:26-11:15:49
return end - start
else: # end < start e.g., 23:55:00-00:25:00
end += timedelta(1) # +day
assert end > start
return end - start
for time_range in ['10:33:26-11:15:49', '23:55:00-00:25:00']:
s, e = [datetime.strptime(t, '%H:%M:%S') for t in time_range.split('-')]
print(time_diff(s, e))
assert time_diff(s, e) == time_diff(s.time(), e.time())
Output
0:42:23
0:30:00
time_diff() returns a timedelta object that you can pass (as a part of the sequence) to a mean() function directly e.g.:
#!/usr/bin/env python
from datetime import timedelta
def mean(data, start=timedelta(0)):
"""Find arithmetic average."""
return sum(data, start) / len(data)
data = [timedelta(minutes=42, seconds=23), # 0:42:23
timedelta(minutes=30)] # 0:30:00
print(repr(mean(data)))
# -> datetime.timedelta(0, 2171, 500000) # days, seconds, microseconds
The mean() result is also timedelta() object that you can convert to seconds (td.total_seconds() method (since Python 2.7)), hours (td / timedelta(hours=1) (Python 3)), etc.
This site says to try:
import datetime as dt
start="09:35:23"
end="10:23:00"
start_dt = dt.datetime.strptime(start, '%H:%M:%S')
end_dt = dt.datetime.strptime(end, '%H:%M:%S')
diff = (end_dt - start_dt)
diff.seconds/60
This forum uses time.mktime()
Structure that represent time difference in Python is called timedelta. If you have start_time and end_time as datetime types you can calculate the difference using - operator like:
diff = end_time - start_time
you should do this before converting to particualr string format (eg. before start_time.strftime(...)). In case you have already string representation you need to convert it back to time/datetime by using strptime method.
I like how this guy does it — https://amalgjose.com/2015/02/19/python-code-for-calculating-the-difference-between-two-time-stamps.
Not sure if it has some cons.
But looks neat for me :)
from datetime import datetime
from dateutil.relativedelta import relativedelta
t_a = datetime.now()
t_b = datetime.now()
def diff(t_a, t_b):
t_diff = relativedelta(t_b, t_a) # later/end time comes first!
return '{h}h {m}m {s}s'.format(h=t_diff.hours, m=t_diff.minutes, s=t_diff.seconds)
Regarding to the question you still need to use datetime.strptime() as others said earlier.
Try this
import datetime
import time
start_time = datetime.datetime.now().time().strftime('%H:%M:%S')
time.sleep(5)
end_time = datetime.datetime.now().time().strftime('%H:%M:%S')
total_time=(datetime.datetime.strptime(end_time,'%H:%M:%S') - datetime.datetime.strptime(start_time,'%H:%M:%S'))
print total_time
OUTPUT :
0:00:05
import datetime as dt
from dateutil.relativedelta import relativedelta
start = "09:35:23"
end = "10:23:00"
start_dt = dt.datetime.strptime(start, "%H:%M:%S")
end_dt = dt.datetime.strptime(end, "%H:%M:%S")
timedelta_obj = relativedelta(start_dt, end_dt)
print(
timedelta_obj.years,
timedelta_obj.months,
timedelta_obj.days,
timedelta_obj.hours,
timedelta_obj.minutes,
timedelta_obj.seconds,
)
result:
0 0 0 0 -47 -37
Both time and datetime have a date component.
Normally if you are just dealing with the time part you'd supply a default date. If you are just interested in the difference and know that both times are on the same day then construct a datetime for each with the day set to today and subtract the start from the stop time to get the interval (timedelta).
Take a look at the datetime module and the timedelta objects. You should end up constructing a datetime object for the start and stop times, and when you subtract them, you get a timedelta.
you can use pendulum:
import pendulum
t1 = pendulum.parse("10:33:26")
t2 = pendulum.parse("10:43:36")
period = t2 - t1
print(period.seconds)
would output:
610
import datetime
day = int(input("day[1,2,3,..31]: "))
month = int(input("Month[1,2,3,...12]: "))
year = int(input("year[0~2020]: "))
start_date = datetime.date(year, month, day)
day = int(input("day[1,2,3,..31]: "))
month = int(input("Month[1,2,3,...12]: "))
year = int(input("year[0~2020]: "))
end_date = datetime.date(year, month, day)
time_difference = end_date - start_date
age = time_difference.days
print("Total days: " + str(age))
Concise if you are just interested in the time elapsed that is under 24 hours. You can format the output as needed in the return statement :
import datetime
def elapsed_interval(start,end):
elapsed = end - start
min,secs=divmod(elapsed.days * 86400 + elapsed.seconds, 60)
hour, minutes = divmod(min, 60)
return '%.2d:%.2d:%.2d' % (hour,minutes,secs)
if __name__ == '__main__':
time_start=datetime.datetime.now()
""" do your process """
time_end=datetime.datetime.now()
total_time=elapsed_interval(time_start,time_end)
Usually, you have more than one case to deal with and perhaps have it in a pd.DataFrame(data) format. Then:
import pandas as pd
df['duration'] = pd.to_datetime(df['stop time']) - pd.to_datetime(df['start time'])
gives you the time difference without any manual conversion.
Taken from Convert DataFrame column type from string to datetime.
If you are lazy and do not mind the overhead of pandas, then you could do this even for just one entry.
Here is the code if the string contains days also [-1 day 32:43:02]:
print(
(int(time.replace('-', '').split(' ')[0]) * 24) * 60
+ (int(time.split(' ')[-1].split(':')[0]) * 60)
+ int(time.split(' ')[-1].split(':')[1])
)