This question already has an answer here:
Compute a chain of functions in python
(1 answer)
Closed 7 months ago.
I am reading Joseph Howse OpenCV book. In the appendix, he's discussing creation of composite function from 2 other functions, as follows:
def createCompositeFunction(func1, func2):
return lambda x : func2(func1(x))
How could I write this for an arbitrary number of functions, like so
def createCompositeFunction(*funcs):
pass
I assume this should be done using recursion, but I can not wrap my head around it.
Any suggestions?
You don't need recursion; this is a simple iterative problem:
def createCompositeFunction(*funcs):
def apply(x):
for func in funcs:
x = func(x)
return x
return apply
def f1(x):
return x + 2
def f2(x):
return x * 3
def f3(x):
return x / 2
comp = createCompositeFunction(f1, f2, f3)
print("comp(1) =", comp(1))
print("comp(2) =", comp(2))
Running the above code will output:
comp(1) = 4.5
comp(2) = 6.0
What you're asking for in functional programming terms is a reducer higher-order function. Python provides functools.reduce to this end:
def reduce(function, iterable, initializer=None):
Where function should be an applicator, iterable is the chain of funcs you want to apply, and initializer is your argument.
Here's a simple example on one argument:
from functools import reduce
def sub1(a):
return a - 1
def mul2(a):
return a * 2
def apply(x, f):
return f(x)
def compose(*fns):
return lambda x: reduce(apply, fns, x)
print(compose(sub1, mul2)(4)) # => 6
You can partial or lambda in extra args as needed:
from functools import partial, reduce
from operator import mul, sub
def compose(*fns):
return lambda x: reduce(lambda x, f: f(x), fns, x)
print(compose(lambda x: sub(x, 2), partial(mul, 3))(4)) # => 6
There are a lot of ways to go with this sort of thing, so I'll leave it at this absent further information about your use case.
As it turns out, this is pretty much a more fleshed-out version of Compute a chain of functions in python.
#ggorlen offers an efficient solution using reduce. Here's a recursive form -
# right-to-left composition
def compose(f = lambda x: x, *funcs):
if not funcs:
return f
else:
return lambda x: f(compose(*funcs)(x))
# left-to-right composition
def compose(f = lambda x: x, *funcs):
if not funcs:
return f
else:
return lambda x: compose(*funcs)(f(x))
Using separate definitions for identity and comp2 may make it easier to see how things are working -
def identity(x):
return x
def comp2(f, g):
return lambda x: f(g(x))
# right-to-left composition
def compose(f = identity, *funcs):
if not funcs:
return f
else:
return comp2(f, compose(*funcs))
# left-to-right composition
def compose(f = identity, *funcs):
if not funcs:
return f
else:
return comp2(compose(*funcs), f)
Here's a complete demo using left-to-right compose and a curry helper. Because curry accepts function as input, we can conveniently use it as a decorator too -
def curry(arity):
def loop(f, n, args):
return f(*args) if n == 0 else lambda x: loop(f, n - 1, (*args, x))
return lambda f: loop(f, arity, ())
#curry(2)
def add(x, y):
return x + y
#curry(2)
def mul(x, y):
return x * y;
myfunc = compose(add(1), mul(2), mul(2), mul(2))
print(myfunc(0))
# (((0 + 1) * 2) * 2) * 2
# 8
You can use accumulate from functools (and keep intermediate results):
from itertools import accumulate
def f1(x): return x + 2
def f2(x): return x * 3
def f3(x): return x / 4
def createCompositeFunction(func1, func2):
return lambda x: func2(func1(x))
# For x=3
l = [f(3) for f in accumulate([f1, f2, f3], createCompositeFunction)]
Output:
>>> l
[5, 15, 3.75] # <- the last item l[-1] is the final value
#larsks has a pretty nice answer. If you're interested in recursion specifically, here's an option:
def createCompositeFunction(*funcs):
func = funcs[0]
funcs = funcs[1:]
if len(funcs) == 0:
return func
return lambda x: func(createCompositeFunction(*funcs)(x))
def square(x):
return x ** 2
square_thrice = createCompositeFunction(square, square, square)
print(square_thrice(2))
Output:
>>> 256
Recursive approached: Assumed that the range of each function is the same of the domain of the next one.
The freedom in the initial value infers a condition on the outputs of the function, it cannot be None (filter as is not None to avoid automatic casting, i.e. 1<-->True, ''<-->False, ...).
def direct_composition(funcs, init_value=None):
if funcs:
if init_value is not None:
return direct_composition(funcs[1:], funcs[0](init_value))
return direct_composition(funcs[1:], funcs[0]())
return init_value
# sample functions
def a0(): return 'a' # initial function with no args
def a(x): return 'a'+x
def b(x): return 'b' + x
def c(x): return 'c' + x
# test with initial function taking parameters
funcs = a, b, c
direct_composition(funcs, '>')
#cba>
# test with initial function taking no parameters
funcs = a0, a, b, c
direct_composition(funcs)
#cba
Double layer approach with no side-effects, no restriction on the output of the functions. A pushward is when you fix a function that will be the most internal one and the other functions will be applied in increasing order to it.
def pushforward(f, initial_value=None):
def apply(value, funcs):
if funcs:
return apply(funcs[0](value), funcs[1:])
return value
return (lambda funcs: apply(f(initial_value), funcs)) if initial_value else (lambda funcs: apply(f(), funcs))
# with no initial value
f_init = a0
funcs = a, b, c
res = pushforward(f_init)(funcs)
print(res)
# with initial value
f_init = a
funcs = b, c
res = pushforward(f_init, '>')(funcs)
print(res)
I wrote a function "rep" that takes a function f and takes n compositions of f.
So rep(square,3) behaves like this: square(square(square(x))).
And when I pass 3 into it, rep(square,3)(3)=6561.
There is no problem with my code, but I was wondering if there was a way to make it "prettier" (or shorter) without having to call another function or import anything. Thanks!
def compose1(f, g):
"""Return a function h, such that h(x) = f(g(x))."""
def h(x):
return f(g(x))
return h
def rep(f,n):
newfunc = f
count=1
while count < n:
newfunc = compose1(f,newfunc)
count+=1
return newfunc
If you're looking for speed, the for loop is clearly the way to go. But if you're looking for theoretical academic acceptance ;-), stick to terse functional idioms. Like:
def rep(f, n):
return f if n == 1 else lambda x: f(rep(f, n-1)(x))
def rep(f, n):
def repeated(x):
for i in xrange(n):
x = f(x)
return x
return repeated
Using a for loop instead of while is shorter and more readable, and compose1 doesn't really need to be a separate function.
While I agree that repeated composition of the same function is best done with a loop, you could use *args to compose an arbitrary number of functions:
def identity(x):
return x
def compose(*funcs):
if funcs:
rest = compose(*funcs[1:])
return lambda x: funcs[0](rest(x))
else:
return identity
And in this case you would have:
def rep(f,n):
funcs = (f,)*n # tuple with f repeated n times
return compose(*funcs)
And as DSM kindly pointed out in the comments, you could remove the recursion like so:
def compose(*funcs):
if not funcs:
return identity
else:
def composed(x):
for f in reversed(funcs):
x = f(x)
return x
return composed
(also note that you can replace x with *args if you also want to support arbitrary arguments to the functions you're composing, but I left it at one argument since that's how you have it in the original problem)
Maybe someone will find this solution useful
Compose number of functions
from functools import reduce
def compose(*functions):
return reduce(lambda x, y: (lambda arg: x(y(arg))), functions)
Use list comprehensions to generate list of functions
def multi(how_many, func):
return compose(*[func for num in range(how_many)])
Usage
def square(x):
return x * x
multi(3, square)(3) == 6561
I have an array of functions and I'm trying to produce one function which consists of the composition of the elements in my array.
My approach is:
def compose(list):
if len(list) == 1:
return lambda x:list[0](x)
list.reverse()
final=lambda x:x
for f in list:
final=lambda x:f(final(x))
return final
This method doesn't seems to be working, help will be appreciated.
(I'm reversing the list because this is the order of composition I want the functions to be)
The easiest approach would be first to write a composition of 2 functions:
def compose2(f, g):
return lambda *a, **kw: f(g(*a, **kw))
And then use reduce to compose more functions:
import functools
def compose(*fs):
return functools.reduce(compose2, fs)
Or you can use some library, which already contains compose function.
def compose (*functions):
def inner(arg):
for f in reversed(functions):
arg = f(arg)
return arg
return inner
Example:
>>> def square (x):
return x ** 2
>>> def increment (x):
return x + 1
>>> def half (x):
return x / 2
>>> composed = compose(square, increment, half) # square(increment(half(x)))
>>> composed(5) # square(increment(half(5))) = square(increment(2.5)) = square(3.5) = 12,25
12.25
It doesn't work because all the anonymous functions you create in the loop refer to the same loop variable and therefore share its final value.
As a quick fix, you can replace the assignment with:
final = lambda x, f=f, final=final: f(final(x))
Or, you can return the lambda from a function:
def wrap(accum, f):
return lambda x: f(accum(x))
...
final = wrap(final, f)
To understand what's going on, try this experiment:
>>> l = [lambda: n for n in xrange(10)]
>>> [f() for f in l]
[9, 9, 9, 9, 9, 9, 9, 9, 9, 9]
This result surprises many people, who expect the result to be [0, 1, 2, ...]. However, all the lambdas point to the same n variable, and all refer to its final value, which is 9. In your case, all the versions of final which are supposed to nest end up referring to the same f and, even worse, to the same final.
The topic of lambdas and for loops in Python has been already covered on SO.
One liner:
compose = lambda *F: reduce(lambda f, g: lambda x: f(g(x)), F)
Example usage:
f1 = lambda x: x+3
f2 = lambda x: x*2
f3 = lambda x: x-1
g = compose(f1, f2, f3)
assert(g(7) == 15)
Recursive implementation
Here's a fairly elegant recursive implementation, which uses features of Python 3 for clarity:
def strict_compose(*funcs):
*funcs, penultimate, last = funcs
if funcs:
penultimate = strict_compose(*funcs, penultimate)
return lambda *args, **kwargs: penultimate(last(*args, **kwargs))
Python 2 compatible version:
def strict_compose2(*funcs):
if len(funcs) > 2:
penultimate = strict_compose2(*funcs[:-1])
else:
penultimate = funcs[-2]
return lambda *args, **kwargs: penultimate(funcs[-1](*args, **kwargs))
This is an earlier version which uses lazy evaluation of the recursion:
def lazy_recursive_compose(*funcs):
def inner(*args, _funcs=funcs, **kwargs):
if len(_funcs) > 1:
return inner(_funcs[-1](*args, **kwargs), _funcs=_funcs[:-1])
else:
return _funcs[0](*args, **kwargs)
return inner
Both would seem to make a new tuple and dict of arguments each recursive call.
Comparison of all suggestions:
Let's test some of these implementations and determine which is most performant, first some single argument functions (Thank you poke):
def square(x):
return x ** 2
def increment(x):
return x + 1
def half(x):
return x / 2
Here's our implementations, I suspect my iterative version is the second most efficient (manual compose will naturally be fastest), but that may be in part due to it sidestepping the difficulty of passing any number of arguments or keyword arguments between functions - in most cases we'll only see the trivial one argument being passed.
from functools import reduce
def strict_recursive_compose(*funcs):
*funcs, penultimate, last = funcs
if funcs:
penultimate = strict_recursive_compose(*funcs, penultimate)
return lambda *args, **kwargs: penultimate(last(*args, **kwargs))
def strict_recursive_compose2(*funcs):
if len(funcs) > 2:
penultimate = strict_recursive_compose2(*funcs[:-1])
else:
penultimate = funcs[-2]
return lambda *args, **kwargs: penultimate(funcs[-1](*args, **kwargs))
def lazy_recursive_compose(*funcs):
def inner(*args, _funcs=funcs, **kwargs):
if len(_funcs) > 1:
return inner(_funcs[-1](*args, **kwargs), _funcs=_funcs[:-1])
else:
return _funcs[0](*args, **kwargs)
return inner
def iterative_compose(*functions):
"""my implementation, only accepts one argument."""
def inner(arg):
for f in reversed(functions):
arg = f(arg)
return arg
return inner
def _compose2(f, g):
return lambda *a, **kw: f(g(*a, **kw))
def reduce_compose1(*fs):
return reduce(_compose2, fs)
def reduce_compose2(*funcs):
"""bug fixed - added reversed()"""
return lambda x: reduce(lambda acc, f: f(acc), reversed(funcs), x)
And to test these:
import timeit
def manual_compose(n):
return square(increment(half(n)))
composes = (strict_recursive_compose, strict_recursive_compose2,
lazy_recursive_compose, iterative_compose,
reduce_compose1, reduce_compose2)
print('manual compose', min(timeit.repeat(lambda: manual_compose(5))), manual_compose(5))
for compose in composes:
fn = compose(square, increment, half)
result = min(timeit.repeat(lambda: fn(5)))
print(compose.__name__, result, fn(5))
Results
And we get the following output (same magnitude and proportion in Python 2 and 3):
manual compose 0.4963762479601428 12.25
strict_recursive_compose 0.6564744340721518 12.25
strict_recursive_compose2 0.7216697579715401 12.25
lazy_recursive_compose 1.260614730999805 12.25
iterative_compose 0.614982972969301 12.25
reduce_compose1 0.6768529079854488 12.25
reduce_compose2 0.9890829260693863 12.25
And my expectations were confirmed: the fastest is of course, manual function composition followed by the iterative implementation. The lazy recursive version is much slower - likely since a new stack frame is created by each function call and a new tuple of functions is created for each function.
For a better and perhaps more realistic comparison, if you remove **kwargs and change *args to arg in the functions, the ones that used them will be more performant, and we can better compare apples to apples - here, aside from manual composition, reduce_compose1 wins followed by the strict_recursive_compose:
manual compose 0.443808660027571 12.25
strict_recursive_compose 0.5409777010791004 12.25
strict_recursive_compose2 0.5698030130006373 12.25
lazy_recursive_compose 1.0381018499610946 12.25
iterative_compose 0.619289995986037 12.25
reduce_compose1 0.49532539502251893 12.25
reduce_compose2 0.9633988010464236 12.25
Functions with just one arg:
def strict_recursive_compose(*funcs):
*funcs, penultimate, last = funcs
if funcs:
penultimate = strict_recursive_compose(*funcs, penultimate)
return lambda arg: penultimate(last(arg))
def strict_recursive_compose2(*funcs):
if len(funcs) > 2:
penultimate = strict_recursive_compose2(*funcs[:-1])
else:
penultimate = funcs[-2]
return lambda arg: penultimate(funcs[-1](arg))
def lazy_recursive_compose(*funcs):
def inner(arg, _funcs=funcs):
if len(_funcs) > 1:
return inner(_funcs[-1](arg), _funcs=_funcs[:-1])
else:
return _funcs[0](arg)
return inner
def iterative_compose(*functions):
"""my implementation, only accepts one argument."""
def inner(arg):
for f in reversed(functions):
arg = f(arg)
return arg
return inner
def _compose2(f, g):
return lambda arg: f(g(arg))
def reduce_compose1(*fs):
return reduce(_compose2, fs)
def reduce_compose2(*funcs):
"""bug fixed - added reversed()"""
return lambda x: reduce(lambda acc, f: f(acc), reversed(funcs), x)
The most reliable implementation I have found is in the 3rd party library toolz. The compose function from this library also deals with docstring for the composition of functions.
The source code is freely available. Below is a simple example of usage.
from toolz import compose
def f(x):
return x+1
def g(x):
return x*2
def h(x):
return x+3
res = compose(f, g, h)(5) # 17
You can also create an array of functions and use reduce:
def f1(x): return x+1
def f2(x): return x+2
def f3(x): return x+3
x = 5
# Will print f3(f2(f1(x)))
print reduce(lambda acc, x: x(acc), [f1, f2, f3], x)
# As a function:
def compose(*funcs):
return lambda x: reduce(lambda acc, f: f(acc), funcs, x)
f = compose(f1, f2, f3)
pip install funcoperators is another library to implement it that allows infix notation:
from funcoperators import compose
# display = lambda x: hex(ord(list(x)))
display = hex *compose* ord *compose* list
# also works as a function
display = compose(hex, ord, list)
pip install funcoperators https://pypi.org/project/funcoperators/
Disclaimer: I'm the creator of the module
Suppose you have the following functions:
def square(x):
return x**2
def inc(x):
return x+1
def half(x):
return x/2
Define a compose function as follows:
import functools
def compose(*functions):
return functools.reduce(lambda f, g: lambda x: g(f(x)),
functions,
lambda x: x)
Usage:
composed = compose(square, inc, inc, half)
compose(10)
>>> 51.0
which executes the functions procedurally in the defined order:
square (= 100)
inc (= 101)
inc (= 102)
half (= 51)
Adapted from https://mathieularose.com/function-composition-in-python/.
I prefer this one due to readability/simplicity
from functools import reduce
def compose(*fs):
apply = lambda arg, f: f(arg)
composition = lambda x: reduce(apply, [x, *fs])
return composition
the pipe = compose(a, b, c) will first apply a, then b and then c.
With regard to maintainability (an debugging) I think actually this one is the easiest to use:
def compose(*fs):
def composition(x):
for f in fs:
x = f(x)
return x
return composition
You can use funcy.
Installation:
pip install funcy
Then you can use compose or rcompose as follows:
from funcy import compose, rcompose
def inc(x): return x + 1
def double(x): return x + x
def tripple(x): return x + x + x
print(compose(tripple, double, inc)(1)) # 12
print(rcompose(inc, double, tripple)(1)) # 12
I found this piece of code from GeeksforGeeks here for Python 3. Not sure of how efficient it is, but it is very simple to understand.
# importing reduce() from functools
from functools import reduce
# composite_function accepts N
# number of function as an
# argument and then compose them
def composite_function(*func):
def compose(f, g):
return lambda x : f(g(x))
return reduce(compose, func, lambda x : x)
# Function to add 2
def add(x):
return x + 2
# Function to multiply 2
def multiply(x):
return x * 2
# Function to subtract 2
def subtract(x):
return x - 1
# Here add_subtract_multiply will
# store lambda x : multiply(subtract(add(x)))
add_subtract_multiply = composite_function(multiply,
subtract,
add)
print("Adding 2 to 5, then subtracting 1 and multiplying the result with 2: ",
add_subtract_multiply(5))
You can keep adding more functions to composite_functions e.g.:
print(composite_function(multiply, add, subtract, multiply,subtract, add)(5))
More general solution of Imanol Luengo from my point of view (python notebook example):
from functools import reduce
from functools import partial
def f(*argv, **kwargs):
print('f: {} {}'.format(argv, kwargs))
return argv, kwargs
def g(*argv, **kwargs):
print('g: {} {}'.format(argv, kwargs))
return argv, kwargs
def compose(fs, *argv, **kwargs):
return reduce(lambda x, y: y(*x[0], **x[1]), fs, (argv, kwargs))
h = partial(compose, [f, g])
h('value', key='value')
output:
f: ('value',) {'key': 'value'}
g: ('value',) {'key': 'value'}
m = partial(compose, [h, f, g])
m('value', key='value')
output:
f: ('value',) {'key': 'value'}
g: ('value',) {'key': 'value'}
f: ('value',) {'key': 'value'}
g: ('value',) {'key': 'value'}
Perfectly good question, but the answers sure are unnecessarily complex. It's just:
def compose(*funs):
return (lambda x:
x if len(funs) == 0
else compose(*funs[:-1])(funs[-1](x)))
If you want no dependencies here is a one-liner recursive solution:
def compose(*f):
return f[0] if len(f) <= 1 else lambda *a,**kw: f[0](compose(*f[1:])(*a,**kw))
N.B. len(f) == 1 might seem more reasonable at first sight, but it allows to write compose() (i.e. no arguments) throwing an error only when you apply the empty compose function. On the contrary, with len(f) <= 1, compose() throws an error immediately, which is a more rational behavior.
This is my version
def compose(*fargs):
def inner(arg):
if not arg:
raise ValueError("Invalid argument")
if not all([callable(f) for f in fargs]):
raise TypeError("Function is not callable")
return reduce(lambda arg, func: func(arg), fargs, arg)
return inner
An example of how it's used
def calcMean(iterable):
return sum(iterable) / len(iterable)
def formatMean(mean):
return round(float(mean), 2)
def adder(val, value):
return val + value
def isEven(val):
return val % 2 == 0
if __name__ == '__main__':
# Ex1
rand_range = [random.randint(0, 10000) for x in range(0, 10000)]
isRandIntEven = compose(calcMean, formatMean,
partial(adder, value=0), math.floor.__call__, isEven)
print(isRandIntEven(rand_range))
I'm writing a python script that should take a list of functions, written as lambda expressions, and return the compose of all the function, but, I have an arrow in the script, maybe because of the way I'm using lambda expression. It seems like even after I give the returned function a number value, I get back a function, and not a number. This is what I've wrote:
def compose1(lst):
if lst == []:
return lambda x: x
else:
temp = (lst[len(lst)-1])
for i in range(len(lst)-2,-1,-1):
temp = lambda x: lst[i](temp)
return lambda x: temp
this is a tast for the function I've wrote, which says I have a mistake.
f = compose1([lambda x: x+1, lambda x: x*2, lambda x: x-1])
for x in range(10):
assert (f(x) == 1 + (x - 1) * 2)
f = compose1([lambda x: x-1, lambda x: x*2, lambda x: x+1])
for x in range(10):
assert (f(x) == (x + 1) * 2) - 1
I would apreciate some halp on this problem..
thanks :)
def compose(*funcs):
"""
compose(func[,...[, func]]) -> function
Return the composition of functions.
For example, compose(foo, bar)(5) == foo(bar(5))
"""
if not all(callable(func) for func in funcs):
raise TypeError('argument must be callable')
funcs = funcs[::-1]
def composition(*args, **kwargs):
args = funcs[0](*args, **kwargs)
for func in funcs[1:]:
args = func(args)
return args
return composition
f = compose(*[lambda x: x+1, lambda x: x*2, lambda x: x-1])
for x in range(10):
assert f(x) == (1 + (x - 1) * 2)
f = compose(*[lambda x: x-1, lambda x: x*2, lambda x: x+1])
for x in range(10):
assert f(x) == ((x + 1) * 2) - 1
It looks like your loop is just reimplementing what reduce does. Here's a functional look at your function composition problem:
def compose1(fnlist):
if not fnlist:
return lambda x: x
# compose 1 function of x from two others
def compose2fns(fn1, fn2):
return lambda x : fn1(fn2(x))
# or if you really love lambdas
# compose2fns = lambda fn1,fn2: lambda x: fn1(fn2(x))
# use reduce to cumulatively apply compose2fns to the functions
# in the given list
return reduce(compose2fns, fnlist)
This passes your tests just fine.
CODE GOLF:
I couldn't resist, here is a one-liner, even including your check for an empty input list:
compose1 = lambda fnlist: reduce(lambda fn1,fn2: lambda x : fn1(fn2(x)),
fnlist or [lambda x:x])
Your issue here is your logic.
for i in range(len(lst)-2,-1,-1):
temp = lambda x: lst[i](temp)
return lambda x: temp
This will set temp to a function. lst is a list of functions, lst[i] is a function. You call that, to give a value, and then you make a new function with lambda. You then return a function that gives that function.
Your return value is a function, that gives a function, that gives a value, hence your issue.
As a note, this code has other problems. if lst == []: should be if not lst:, for example. You should also never iterate by index, and instead iterate by value, as Python is designed. I can't actually work out what you are trying to achieve with your code, which shows how hard to read iterating by index is.
Your code currently does this:
If there are no values, return a function that returns the first argument.
If there is one value, return the function in the list.
If there are many values, return a function that returns a function that returns the first value retrieved by running the first function from the list.
I'm not sure what you were trying to do, but I'm pretty sure that isn't it.
I like this syntax:
f = do (lambda x: x-1) (lambda x: x*2) (lambda x: x+1)
for x in range(10):
assert f(x) == 1 + (x - 1) * 2
The implementation is surprisingly trivial:
class do(object):
def __init__(self, x):
self.fns = [x]
def __call__(self, x):
if callable(x):
self.fns.append(x)
return self
for f in self.fns:
x = f(x)
return x