I use the following code when training a model in keras
from keras.callbacks import EarlyStopping
model = Sequential()
model.add(Dense(100, activation='relu', input_shape = input_shape))
model.add(Dense(1))
model_2.compile(optimizer='adam', loss='mean_squared_error', metrics=['accuracy'])
model.fit(X, y, epochs=15, validation_split=0.4, callbacks=[early_stopping_monitor], verbose=False)
model.predict(X_test)
but recently I wanted to get the best trained model saved as the data I am training on gives a lot of peaks in "high val_loss vs epochs" graph and I want to use the best one possible yet from the model.
Is there any method or function to help with that?
EarlyStopping and ModelCheckpoint is what you need from Keras documentation.
You should set save_best_only=True in ModelCheckpoint. If any other adjustments needed, are trivial.
Just to help you more you can see a usage here on Kaggle.
Adding the code here in case the above Kaggle example link is not available:
model = getModel()
model.summary()
batch_size = 32
earlyStopping = EarlyStopping(monitor='val_loss', patience=10, verbose=0, mode='min')
mcp_save = ModelCheckpoint('.mdl_wts.hdf5', save_best_only=True, monitor='val_loss', mode='min')
reduce_lr_loss = ReduceLROnPlateau(monitor='val_loss', factor=0.1, patience=7, verbose=1, epsilon=1e-4, mode='min')
model.fit(Xtr_more, Ytr_more, batch_size=batch_size, epochs=50, verbose=0, callbacks=[earlyStopping, mcp_save, reduce_lr_loss], validation_split=0.25)
EarlyStopping's restore_best_weights argument will do the trick:
restore_best_weights: whether to restore model weights from the epoch with the best value of the monitored quantity. If False, the model weights obtained at the last step of training are used.
So not sure how your early_stopping_monitor is defined, but going with all the default settings and seeing you already imported EarlyStopping you could do this:
early_stopping_monitor = EarlyStopping(
monitor='val_loss',
min_delta=0,
patience=0,
verbose=0,
mode='auto',
baseline=None,
restore_best_weights=True
)
And then just call model.fit() with callbacks=[early_stopping_monitor] like you already do.
I guess model_2.compile was a typo.
This should help if you want to save the best model w.r.t to the val_losses -
checkpoint = ModelCheckpoint('model-{epoch:03d}-{acc:03f}-{val_acc:03f}.h5', verbose=1, monitor='val_loss',save_best_only=True, mode='auto')
model.compile(optimizer='adam', loss='mean_squared_error', metrics=['accuracy'])
model.fit(X, y, epochs=15, validation_split=0.4, callbacks=[checkpoint], verbose=False)
Related
New to ML and I would like to know what I'm missing or doing incorrectly.
I'm trying to figure out why my data is being underfit when applying early stopping and dropout however when I don't use earlystopping or dropout the fit seems to be okay...
Dataset I'm using:
https://www.kaggle.com/datasets/kanths028/usa-housing
Model Parameters:
The dataset has 5 features to train on and the target is the price
I chose 4 layers arbitrarily
Epochs at 600 (way too many) because I want to test early stopping
Optimizers and loss because those seemed to get me the most consistent results when compared to SKLearns LinearRegression (MAE is about 81K)
Data Pre-preprocessing:
X = df[df.columns[:-2]].values
y = df['Price'].values
X_train, X_test, y_train, y_test = train_test_split(X, y, test_size=0.30, random_state=42)
scaler = MinMaxScaler()
X_train = scaler.fit_transform(X_train)
X_test = scaler.transform(X_test)
Fit looks okay:
model = Sequential()
model.add(Dense(5, activation='relu'))
model.add(Dense(5, activation='relu'))
model.add(Dense(5, activation='relu'))
model.add(Dense(5, activation='relu'))
model.add(Dense(1))
model.compile(optimizer='adam', loss='mae')
model.fit(X_train, y_train, validation_data=(X_test, y_test), epochs=600)
Data looks underfit with earlystopping and dropout combined:
model = Sequential()
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(1))
early_stopping = EarlyStopping(monitor='val_loss', mode='min', patience=25)
model.compile(optimizer='adam', loss='mae')
model.fit(X_train, y_train, validation_data=(X_test, y_test), epochs=600, callbacks=[early_stopping])
I'm trying to figure out why early stopping would stop when the results are so far off. I would guess that the model would continue until the end of the 600 epochs however early stopping pulls the plug around 300.
I'm probably doing something wrong but I can't figure it out so any insights would be appreciated. Thank you in advance :)
It defines performance measure and specifies whether to maximize or minimize it.
Keras then stops training at the appropriate epoch. When verbose=1 is designated, it is possible to output on the screen when the training is stopped in keras.
es = EarlyStopping(monitor='val_loss', mode='min')
It may not be effective to stop right away because performance does not increase. Patience defines how many times to allow epochs that do not increase performance. Partiance is a rather subjective criterion. The optimal value can be changed depending on the design of the used data and model used.
es = EarlyStopping(monitor='val_loss', mode='min', verbose=1, patience=50)
When the training is stopped by the Model Choice Early stopping object, the state will generally have a higher validation error than the previous model. Therefore, early stopping may be controlled so that the validation error of the model is no longer lowered by stopping the training of the model at a certain point in time, but the stopped state will not be the best model. Therefore, it is necessary to store the model with the best validation performance, and for this purpose, the object called Model Checkpoint exists in keras. This object monitors validation errors and unconditionally stores parameters at this time if the validation performance is better than the previous epoch. Through this, when training is stopped, the model with the highest validation performance can be returned.
from keras.callbacks import ModelCheckpoint
mc = ModelCheckpoint ('best_model.h5', monitor='val_loss', mode='min', save_best_only=True)
in the callbacks parameter, allowing the best model to be stored.
hist = model.fit(train_x, train_y, nb_epoch=10,
batch_size=10, verbose=2, validation_split=0.2,
callbacks=[early_stopping, mc])
In your case Patience 25 indicates whether to end when the reference value does not improve more than 25 times consecutively.
from keras.callbacks import ModelCheckpoint
model = Sequential()
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(10, activation='relu'))
model.add(Dropout(0.2))
model.add(Dense(1))
early_stopping = EarlyStopping(monitor='val_loss', mode='min', patience=25, verbose=1)
mc = ModelCheckpoint ('best_model.h5', monitor='val_loss', mode='min', save_best_only=True)
model.compile(optimizer='adam', loss='mae')
model.fit(X_train, y_train, validation_data=(X_test, y_test), epochs=600, callbacks=[early_stopping, mc])
I recommend 2 things. In the early stop callback set the parameter
restore_best_weights=True
This way if the early stopping callback activates, your model is set to the weights for the epoch with the lowest validation loss. To get the lower validation loss I recommend you use the callback ReduceLROnPlateau. My recommended code for these callbacks is shown below.
estop=tf.keras.callbacks.EarlyStopping( monitor="val_loss", patience=4,
verbose=1, estore_best_weights=True)
rlronp=tf.keras.callbacks.ReduceLROnPlateau(monitor="val_loss", factor=0.5,
patience=2, verbose=1)
callbacks=[estop, rlronp]
In model.fit set parameter callbacks=callbacks. Set epochs to a large number so it is likely the estop callback will be activated.
I am training a model and wanted to progressively freeze layers and continue training with the already learned weights. I tried to see if I can find something but can't seem to find anything. I looked at this post but it wasnt much help. Can some one please confirm that I am doing this correctly. This is using keras.
model = create_model()
model.compile(loss=loss, optimizer=opt_rms, metrics=['acc'])
mdl_fit = model.fit_generator(
train_dataset, steps_per_epoch=len(train_dataset),
callbacks=[early_stopping_monitor],
epochs=n_epochs, verbose=1, validation_data=test_dataset
)
for x in range(4):
for layer in model.layers[100-((x+1)*20):100-(x*20)]:
layer.trainable = True
model.compile(loss=loss, optimizer=opt_rms, metrics=['acc'])
mdl_fit = model.fit_generator(
train_dataset, steps_per_epoch=len(train_dataset),
# , callbacks=[early_stopping_monitor]
epochs=n_epochs, verbose=1, validation_data=test_dataset
)
There is a lot already out there about saving models, but I'm struggling to work out how I can save my model only when it improves upon val_accuracy. My model looks like this:
model = keras.Sequential([
keras.layers.Embedding(numberOfWords,
embedding_vector_length, input_length=1000),
keras.layers.LSTM(128),
keras.layers.Dropout(0.3),
keras.layers.Dense(128, activation='relu'),
keras.layers.Dropout(0.3),
keras.layers.Dense(64, activation='relu'),
keras.layers.Dropout(0.3),
keras.layers.Dense(1, activation='sigmoid')
])
model.compile(optimizer=tf.keras.optimizers.Adam(lr=1e-3, decay=1e-5), loss='binary_crossentropy',
metrics=['accuracy'])
model.fit(x_train, y_train, epochs=200, batch_size=32,
validation_data=(x_test, y_test))
During training, I want to save the model after the first epoch. Then, after every epoch, if val_accuracy has been improved upon, I want to overwrite the old model with the new one.
How do I do this?
you just have to define a Callback-List and enter it into the model.fit declaration: Keras_fit In this example its just safing the best weigths, so its actually overwriting the old ones, and safes it into an hdf5 format. Hope that solved your problem :)
from keras.callbacks import ModelCheckpoint
filepath="weights.best.hdf5"
checkpoint = ModelCheckpoint(filepath, monitor='val_acc', verbose=1,save_best_only=True, mode='max')
callbacks_list = [checkpoint]
model.fit(x_train, y_train, epochs=200,,callbacks=callbacks_list, batch_size=32,
validation_data=(x_test, y_test))
1.
model = Model(inPut, outputs=outPut)
model.compile(loss="mse", optimizer="adam")
for i in range(10):
model.fit(dataX, dataY, epochs=EPOCH, batch_size=BATCHSIZE, verbose=0, shuffle=False)
#save model
2.
model = Model(inPut, outputs=outPut)
for i in range(10):
model.compile(loss="mse", optimizer="adam")
model.fit(dataX, dataY, epochs=EPOCH, batch_size=BATCHSIZE, verbose=0, shuffle=False)
#save model
3.
for i in range(10):
model = Model(inPut, outputs=outPut)
model.compile(loss="mse", optimizer="adam")
model.fit(dataX, dataY, epochs=EPOCH, batch_size=BATCHSIZE, verbose=0, shuffle=False)
#save model
I studied neural network in keras.
i want that each iteration is each learning.
but second(third.. fourth..) iteration learning(model.fit) is going continually fisrt learning(model.fit)
loss is going continually in three code.
could you tell me some method that each iteration is each learning?
each iteration model is another model.
If it is your intent to create differently trained models but maintain the same architecture, then your code snippet for #3 is the one you're after. You create a new model using the same architecture, configure the neural network then train it. After each iteration, make sure you save the model.
I am training a neural network with Keras. I set num_epochs to a high number and let EarlyStopping terminate training.
model = Sequential()
model.add(Dense(1, input_shape=(nFeatures,), activation='linear'))
model.compile(optimizer='rmsprop', loss='mse', metrics=['mse', 'mae'])
early_stopping_monitor = EarlyStopping(monitor='val_loss', patience=15, verbose=1, mode='auto')
checkpointer = ModelCheckpoint(filepath = fname_saveWeights, verbose=1, save_best_only=True)
seqModel = model.fit(X_train, y_train, batch_size=4, epochs=num_epochs, validation_data=(X_test, y_test), shuffle=True, callbacks=[early_stopping_monitor, checkpointer], verbose=2)
This works fine. However, I then attempt to plot the loss function:
val_loss = seqModel.history['val_loss']
xc = range(num_epochs)
plt.figure()
plt.plot(xc, val_loss)
plt.show()
I am attempting to plot the range of num-epochs (xc) but EarlyStopping ends much earlier, so I have an error in shapes.
How can I detect at what epoch EarlyStopping ended to solve the mismatch?
Verbose setting prints the ending epoch to screen, but I cannot determine how to access the value to use in the plot.
It is set (code) as a field inside the callback:
early_stopping_monitor.stopped_epoch
will give you the epoch it stopped at after training or 0 if it didn't early stop.