I would like you to suggest me some way how non-IT person would install program I created.
So basically I have virtualenv with python with libs. I am looking for some program that would create something (some exe or whatever necessary) that I would just put on usb, and when another human copied it on newly installed windows pc, it would just work. Its going to be PyQT application.
I would easily be able to setup everything, but it needs to be dumb-proof way. Just some 'exe-like' solution that would do everything itself.
Any suggestions would be highly appreciated. If you feel like this is duplicate, please point me into right direction...but all examples I found needed at least little bit of "IT mind".
pyinstaller package is the best one! see : http://www.pyinstaller.org/
with pyinstaller you can convert your .py files to .exe
you should install ( pywin32 pakcage too ), then you can try this ( run this on your commandline ):
pyinstaller.exe --onefile --windowed --icon=app.ico your_app.py
you can find all its commands on : https://pythonhosted.org/PyInstaller/usage.html, https://mborgerson.com/creating-an-executable-from-a-python-script/
Related
I'm trying to convert a fairly simple Python program to an executable and couldn't find what I was looking for, so I have a few questions (I'm running Python 3.6):
The methods of doing this that I have found so far are as follows
downloading an old version of Python and using pyinstaller/py2exe
setting up a virtual environment in Python 3.6 that will allow me to do 1.
downloading a Python to C++ converter and using that.
Here is what I've tried/what problems I've run into.
I installed pyinstaller before the required download before it (pypi-something) so it did not work. After downloading the prerequisite file, pyinstaller still does not recognize it.
If I'm setting up a virtualenv in Python 2.7, do I actually need to have Python 2.7 installed?
similarly, the only python to C++ converters I see work only up until Python 3.5 - do I need to download and use this version if attempting this?
Steps to convert .py to .exe in Python 3.6
Install Python 3.6.
Install cx_Freeze, (open your command prompt and type pip install cx_Freeze.
Install idna, (open your command prompt and type pip install idna.
Write a .py program named myfirstprog.py.
Create a new python file named setup.py on the current directory of your script.
In the setup.py file, copy the code below and save it.
With shift pressed right click on the same directory, so you are able to open a command prompt window.
In the prompt, type python setup.py build
If your script is error free, then there will be no problem on creating application.
Check the newly created folder build. It has another folder in it. Within that folder you can find your application. Run it. Make yourself happy.
See the original script in my blog.
setup.py:
from cx_Freeze import setup, Executable
base = None
executables = [Executable("myfirstprog.py", base=base)]
packages = ["idna"]
options = {
'build_exe': {
'packages':packages,
},
}
setup(
name = "<any name>",
options = options,
version = "<any number>",
description = '<any description>',
executables = executables
)
EDIT:
be sure that instead of myfirstprog.py you should put your .pyextension file name as created in step 4;
you should include each imported package in your .py into packages list (ex: packages = ["idna", "os","sys"])
any name, any number, any description in setup.py file should not remain the same, you should change it accordingly (ex:name = "<first_ever>", version = "0.11", description = '' )
the imported packages must be installed before you start step 8.
Python 3.6 is supported by PyInstaller.
Open a cmd window in your Python folder (open a command window and use cd or while holding shift, right click it on Windows Explorer and choose 'Open command window here'). Then just enter
pip install pyinstaller
And that's it.
The simplest way to use it is by entering on your command prompt
pyinstaller file_name.py
For more details on how to use it, take a look at this question.
There is an open source project called auto-py-to-exe on GitHub. Actually it also just uses PyInstaller internally but since it is has a simple GUI that controls PyInstaller it may be a comfortable alternative. It can also output a standalone file in contrast to other solutions. They also provide a video showing how to set it up.
GUI:
Output:
Alternatively use pyinstaller directly:
pip install pyinstaller
pyinstaller filename
I can't tell you what's best, but a tool I have used with success in the past was cx_Freeze. They recently updated (on Jan. 7, '17) to version 5.0.1 and it supports Python 3.6.
Here's the pypi
https://pypi.python.org/pypi/cx_Freeze
The documentation shows that there is more than one way to do it, depending on your needs.
http://cx-freeze.readthedocs.io/en/latest/overview.html
I have not tried it out yet, so I'm going to point to a post where the simple way of doing it was discussed. Some things may or may not have changed though.
How do I use cx_freeze?
Now you can convert it by using PyInstaller. It works with even Python 3.
Steps:
Fire up your PC
Open command prompt
Enter command pip install pyinstaller
When it is installed, use the command 'cd' to go to the working directory.
Run command pyinstaller <filename>
I've been using Nuitka and PyInstaller with my package, PySimpleGUI.
Nuitka
There were issues getting tkinter to compile with Nuikta. One of the project contributors developed a script that fixed the problem.
If you're not using tkinter it may "just work" for you. If you are using tkinter say so and I'll try to get the script and instructions published.
PyInstaller
I'm running 3.6 and PyInstaller is working great!
The command I use to create my exe file is:
pyinstaller -wF myfile.py
The -wF will create a single EXE file. Because all of my programs have a GUI and I do not want to command window to show, the -w option will hide the command window.
This is as close to getting what looks like a Winforms program to run that was written in Python.
[Update 20-Jul-2019]
There is PySimpleGUI GUI based solution that uses PyInstaller. It uses PySimpleGUI. It's called pysimplegui-exemaker and can be pip installed.
pip install PySimpleGUI-exemaker
To run it after installing:
python -m pysimplegui-exemaker.pysimplegui-exemaker
The best and easiest way is auto-py-to-exe for sure, and I have given all the steps and red flags below which will take you just 5 mins to get a final .exe file as you don't have to learn anything to use it.
1.) It may not work for python 3.9 on some devices I guess.
2.) While installing python, if you had selected 'add python 3.x to path', open command prompt from start menu and you will have to type pip install auto-py-to-exe to install it. You will have to press enter on command prompt to get the result of the line that you are typing.
3.) Once it is installed, on command prompt itself, you can simply type just auto-py-to-exe to open it. It will open a new window. It may take up to a minute the first time. Also, closing command prompt will close auto-py-to-exe also so don't close it till you have your .exe file ready.
4.) There will be buttons for everything you need to make a .exe file and the screenshot of it is shared below. Also, for the icon, you need a .ico file instead of an image so to convert it, you can use https://convertio.co/
5.) If your script uses external files, you can add them through auto-py-to-exe and in the script, you will have to do some changes to their path. First, you have to write import sys if not written already, second, you have to make a variable for eg, location=getattr(sys,"_MEIPASS",".")+"/", third, the location of example.png would be location+"/example.png" if it is not in any folder.
6.) If it is showing any error, it may probably be because of a module called setuptools not being at the latest version. To upgrade it to the latest version, on command prompt, you will have to write pip install --upgrade setuptools. Also, in the script, writing import setuptools may help. If the version of setuptools is more than 50.0.0 then everything should be fine.
7.) After all these steps, in auto-py-to-exe, when the conversion is complete, the .exe file will be in the folder that you would have chosen (by default, it is 'c:/users/name/output') or it would have been removed by your antivirus if you have one. Every antivirus has different methods to restore a file so just experiment if you don't know.
Here is how the simple GUI of auto-py-to-exe can be used to make a .exe file.
PyOxidizer can be an option here. It's pretty popular with 3.3k stars on Github. Its documentation says
PyOxidizer is capable of producing a single file executable - with a copy of Python and all its dependencies statically linked and all resources (like .pyc files) embedded in the executable. You can copy a single executable file to another machine and run a Python application contained within. It just works.
While I'm not sure if it is capable of producing .exe file PyOxidizer definitely helps with packaging and distribution.
I have already converted my python script .py to .exe using pyinstaller. When I try to run this exe in Windows 10. It states this app can not be run on your PC.
As far as I see, I need to install Python in Windows as well, but in my situation this is not an option. In my company, every computer uses Windows 10 and there is no way for me to install Python all of them.
What I wonder is that whether there is any way to run my .py script in Windows 10 without installing anything into Windows 10. I should give a working directory to people in my company and they should run my script with just one click.
EDIT:
With the help of #Amey and #L00n3y, I managed to solve my problem. In case anyone has same problem, I explained the procedure clearly, in this link.
have you tried py2exe?
py2exe is a distutils extension which allows to build standalone Windows executable programs from Python scripts.
You can download it here:
https://pypi.org/project/py2exe/
You can also use 'Pyinstaller' which is widely used.
Install it using,
pip install pyinstaller
And create an executable using the following command,
Python pyinstaller.py --onefile pythonfile.py
With the help of #Amey and #L00n3y, I managed to solve my problem. In case anyone has same problem, I explained the procedure clearly, in this link.
I have developed a tkinter application but I need other users (with Windows 10 OS) to use it. Some have a python interpreter installed but others don't. I tried to create an executable through py2exe and auto py-to-exe but none worked. I also tried to run the tkinter through pythonanywhere.com but it also didn't work.
Is there a simply way to share the py files? Perhaps is there a click-to-run environment? What I don't need is to request users to install a full python application such as anaconda or WinPython, as this does not make sense for the users without a python interpreter.
I would use pyinstaller
run cmd.exe as Administartor and type:
pip install pyinstaller
then run with:
pyinstaller --onefile --noconsole --name your_script.py
This creates a single file executable which also includes your Python with all dependencies of your script/project.
If your projects contains external files like images/sounds you might need to edit the spec file as described here.
Full credit to the kid who made this video, it helped me out a lot when I had the same style of problem as you.
https://www.youtube.com/watch?v=pzc4vYqbruk
You'll just have to go through the generated .zip file to find the generated .exe file.
I'm trying to convert a fairly simple Python program to an executable and couldn't find what I was looking for, so I have a few questions (I'm running Python 3.6):
The methods of doing this that I have found so far are as follows
downloading an old version of Python and using pyinstaller/py2exe
setting up a virtual environment in Python 3.6 that will allow me to do 1.
downloading a Python to C++ converter and using that.
Here is what I've tried/what problems I've run into.
I installed pyinstaller before the required download before it (pypi-something) so it did not work. After downloading the prerequisite file, pyinstaller still does not recognize it.
If I'm setting up a virtualenv in Python 2.7, do I actually need to have Python 2.7 installed?
similarly, the only python to C++ converters I see work only up until Python 3.5 - do I need to download and use this version if attempting this?
Steps to convert .py to .exe in Python 3.6
Install Python 3.6.
Install cx_Freeze, (open your command prompt and type pip install cx_Freeze.
Install idna, (open your command prompt and type pip install idna.
Write a .py program named myfirstprog.py.
Create a new python file named setup.py on the current directory of your script.
In the setup.py file, copy the code below and save it.
With shift pressed right click on the same directory, so you are able to open a command prompt window.
In the prompt, type python setup.py build
If your script is error free, then there will be no problem on creating application.
Check the newly created folder build. It has another folder in it. Within that folder you can find your application. Run it. Make yourself happy.
See the original script in my blog.
setup.py:
from cx_Freeze import setup, Executable
base = None
executables = [Executable("myfirstprog.py", base=base)]
packages = ["idna"]
options = {
'build_exe': {
'packages':packages,
},
}
setup(
name = "<any name>",
options = options,
version = "<any number>",
description = '<any description>',
executables = executables
)
EDIT:
be sure that instead of myfirstprog.py you should put your .pyextension file name as created in step 4;
you should include each imported package in your .py into packages list (ex: packages = ["idna", "os","sys"])
any name, any number, any description in setup.py file should not remain the same, you should change it accordingly (ex:name = "<first_ever>", version = "0.11", description = '' )
the imported packages must be installed before you start step 8.
Python 3.6 is supported by PyInstaller.
Open a cmd window in your Python folder (open a command window and use cd or while holding shift, right click it on Windows Explorer and choose 'Open command window here'). Then just enter
pip install pyinstaller
And that's it.
The simplest way to use it is by entering on your command prompt
pyinstaller file_name.py
For more details on how to use it, take a look at this question.
There is an open source project called auto-py-to-exe on GitHub. Actually it also just uses PyInstaller internally but since it is has a simple GUI that controls PyInstaller it may be a comfortable alternative. It can also output a standalone file in contrast to other solutions. They also provide a video showing how to set it up.
GUI:
Output:
Alternatively use pyinstaller directly:
pip install pyinstaller
pyinstaller filename
I can't tell you what's best, but a tool I have used with success in the past was cx_Freeze. They recently updated (on Jan. 7, '17) to version 5.0.1 and it supports Python 3.6.
Here's the pypi
https://pypi.python.org/pypi/cx_Freeze
The documentation shows that there is more than one way to do it, depending on your needs.
http://cx-freeze.readthedocs.io/en/latest/overview.html
I have not tried it out yet, so I'm going to point to a post where the simple way of doing it was discussed. Some things may or may not have changed though.
How do I use cx_freeze?
Now you can convert it by using PyInstaller. It works with even Python 3.
Steps:
Fire up your PC
Open command prompt
Enter command pip install pyinstaller
When it is installed, use the command 'cd' to go to the working directory.
Run command pyinstaller <filename>
I've been using Nuitka and PyInstaller with my package, PySimpleGUI.
Nuitka
There were issues getting tkinter to compile with Nuikta. One of the project contributors developed a script that fixed the problem.
If you're not using tkinter it may "just work" for you. If you are using tkinter say so and I'll try to get the script and instructions published.
PyInstaller
I'm running 3.6 and PyInstaller is working great!
The command I use to create my exe file is:
pyinstaller -wF myfile.py
The -wF will create a single EXE file. Because all of my programs have a GUI and I do not want to command window to show, the -w option will hide the command window.
This is as close to getting what looks like a Winforms program to run that was written in Python.
[Update 20-Jul-2019]
There is PySimpleGUI GUI based solution that uses PyInstaller. It uses PySimpleGUI. It's called pysimplegui-exemaker and can be pip installed.
pip install PySimpleGUI-exemaker
To run it after installing:
python -m pysimplegui-exemaker.pysimplegui-exemaker
The best and easiest way is auto-py-to-exe for sure, and I have given all the steps and red flags below which will take you just 5 mins to get a final .exe file as you don't have to learn anything to use it.
1.) It may not work for python 3.9 on some devices I guess.
2.) While installing python, if you had selected 'add python 3.x to path', open command prompt from start menu and you will have to type pip install auto-py-to-exe to install it. You will have to press enter on command prompt to get the result of the line that you are typing.
3.) Once it is installed, on command prompt itself, you can simply type just auto-py-to-exe to open it. It will open a new window. It may take up to a minute the first time. Also, closing command prompt will close auto-py-to-exe also so don't close it till you have your .exe file ready.
4.) There will be buttons for everything you need to make a .exe file and the screenshot of it is shared below. Also, for the icon, you need a .ico file instead of an image so to convert it, you can use https://convertio.co/
5.) If your script uses external files, you can add them through auto-py-to-exe and in the script, you will have to do some changes to their path. First, you have to write import sys if not written already, second, you have to make a variable for eg, location=getattr(sys,"_MEIPASS",".")+"/", third, the location of example.png would be location+"/example.png" if it is not in any folder.
6.) If it is showing any error, it may probably be because of a module called setuptools not being at the latest version. To upgrade it to the latest version, on command prompt, you will have to write pip install --upgrade setuptools. Also, in the script, writing import setuptools may help. If the version of setuptools is more than 50.0.0 then everything should be fine.
7.) After all these steps, in auto-py-to-exe, when the conversion is complete, the .exe file will be in the folder that you would have chosen (by default, it is 'c:/users/name/output') or it would have been removed by your antivirus if you have one. Every antivirus has different methods to restore a file so just experiment if you don't know.
Here is how the simple GUI of auto-py-to-exe can be used to make a .exe file.
PyOxidizer can be an option here. It's pretty popular with 3.3k stars on Github. Its documentation says
PyOxidizer is capable of producing a single file executable - with a copy of Python and all its dependencies statically linked and all resources (like .pyc files) embedded in the executable. You can copy a single executable file to another machine and run a Python application contained within. It just works.
While I'm not sure if it is capable of producing .exe file PyOxidizer definitely helps with packaging and distribution.
I think my question is quite badly phrased, which may be why I haven't been able to find the answer yet.
I created my program in Python, created an installable .exe file from it using bdist_winisnt. Once the program is installed, I would like to be able to run it from anywhere. It's a command line program, so I would like the user to be able to be in a different directory and still be able to type example.py in command line and the program can run.
Is this possible? Is there a way of including some kind of path instruction in the setup.py which will be run on install so that the computer will always know where it is?
I would also like to be able to do this in Linux at some point, will it work the same?
I'm very new to programming, so I may have made some mistakes with what I have said, apologies in advance.
EDIT: turns out there was a really simple way to do it by adding one line to the setup.py file
Good answer to your question is: http://docs.python-guide.org/en/latest/shipping/freezing/
Options are:
bbFreeze
py2exe (supports Python 3)
pyInstaller (does not support Python 3)
cx_Freeze
py2app (Mac)
Your installer only copies the python script to a specified directory.
In order to run a python script you need to have python installed.
You can use a tool like PyInstaller to convert your script (.py file) into an executable (.exe on windows). The way that works is PyInstaller copies both the python interpretor and your script into a single file so that you can distribuite your program easily.
After you have converted your script into an executable, you need to add it to the path so that your operating system knows where to find it. After you do that, you can run your program from the command line from any directory.
The same process will also work on Linux, but you'd have to make separate distributions of the executable because windows executables are different from linux executables.
Check PyInstaller
PyInstaller is promising solution for creation of executables.
I have tested it on Ubuntu, but documentation claims, MS Windows is supported too.
There are multiple options, one of them being single executable file (which include complete Python).