Related
Is there now an easy protocol to build a .exe from python 3.5+, using modules pyqtgraph, qt5, theano, pymc3, numpy, scipy, os and sys, and opening a simple GUI stored in a '.ui' file ? I lost hours and eventually failed to make one (for w7-64 bits). Help !
preliminary failure with py2exe: I first install py2exe for python 3 but it turns out this is not compatible with my python 3.6 yet, so I downgraded to python 3.5… to get a bunch of errors. Then I went to forums and tried the proposed cures but failed (I’m uneasy with windows), the alternative being to downgrade to python 3.4… So I downgraded to python 3.4 to get an error concerning a missing ‘msvcr100.dll’ that I tried to install following instructions on forums but by default I don’t have the permission to modify system directories… When I eventually had this permission it turns out the ‘regsvr32’ command fails (isn’t this for 32 bits ? but there is no ‘regsvr64’…). Following episodes are described below.
update august 23, 2017, 1pm:
I also tried pyinstaller as advised but it failed (see my related question build a .exe for Windows from a python 3 script importing theano with pyinstaller)
I also tried cx_freeze but it failed (see my related question build a .exe for Windows from a python 3 script)
I also tried pynsist but it fails (same link than above)
what's next ?
update september, 2, 2pm:
I eventually managed to build a .exe with pyinstaller after many episodes.
Unfortunately I failed to deal with the ‘theano’ module (that is required in my case by the ‘pymc3’ module) and I had to modify the .py files and give up part of the application. Could anyone help me building a .exe for windows 7+, with the ‘theano’ module ?
see build a .exe for Windows from a python 3 script importing theano with pyinstaller
Pyinstaller Works with Python 3.5 and it is working even for packages like tensor-flow, scipy , etc (The packages I worked with)
py -3.5 pip install pyinstaller
then go the C:\Users\user\AppData\Local\Programs\Python\Python35\Scripts
and run the command
pyinstaller <code .py file along with directory> --onefile
--onefile : is for compressing the build and get a single file as output
I would suggest pyinstaller see http://www.pyinstaller.org/
The pyinstaller already supports 3.5
The development version supports 3.6
It is better to use spec file to import other hidden libraries. I listed all Sklearn libraries and add them to spec file as a hiddenimports, you can add libraries you used in your project.
My current version of Python is the newest 3.5 and the only available PyGame was for 3.2 (both PyGame and Python are 32-bit). I've scoured stackoverflow for a resolution and can't find any way to make this work. I've installed the PyGame easy installer and placed it in the directory where my Python install is, and in Visual Studio (I've also tried this in PyCharm as well as the standard Python IDE in command prompt), upon typing
import pygame or import sys, pygame
I'm presented with the error Import Error was
unhandled by user code - DLL load failed: The specified module could not be found.
My final solution is to uninstall Python 3.5 and install the version which matches PyGame.
This shouldn't have anything to do with Python version. You are missing a dynamic library (the DLL). This means that either the DLL is not on your system or Python can't find it. You should probably try the msi/exe installer for PyGame mentioned here, as it should install any dependencies. This would fix the issue if it is caused by the DLL being absent from your system.
It could also be caused by the libraries not being on PYTHONPATH. Search the error you received and you should see quite a few answers on fixing this.
If you're just getting started, you may want to look at a different library. There are likely quite a few game libraries for Python that can be installed with a simple pip install. You could then return to PyGame when you are more comfortable if you wanted.
get it from here: https://www.dropbox.com/s/hnmcaq1rf6zn7m3/pygame-1.9.2a0-cp34-none-win32.whl?dl=0
download it and install it by putting it in C:\python3.5\Scripts
then run pip3 install pygame-1.9.2a0-cp34-none-win32.whl
(this is for 3.4, but 3.5 works too)
it should work, and your error has nothing to do with the package, it's just that you do not have a DLL file, install it again from the website above
When running python26 under windows OS (64bits).....
I have got errors like:
import win32api" error in Python 2.6: pywintypes26.dll
or
pythoncom26.dll missing
ImportError: DLL load failed: The specified module could not be found.
I have done the msi installation for python26
all dlls can be found under C:\Python26\Lib\site-packages\pywin32_system32
After I copy pywintypes26.dll and pythoncom26.dll from C:\Python26\Lib\site-packages\pywin32_system32 to C:\Python26\Lib\site-packages\win32 -> Solve the problem!
I also hit a problem importing win32api.
The post-install script for pywin32 failed, which should copy pythoncom26.dll, pythoncomloader26.dll, and pywintypes26.dll, among other things. I ran it by hand and my installation was fixed.
python scripts\pywin32_postinstall.py -install
I had a similar problem when installing under 64 bit Python 3.4.2. I ran the install executable pywin32‑219.win‑amd64‑py3.4.exe from http://www.lfd.uci.edu/~gohlke/pythonlibs/ .
On the site it states clearly:
"Python 3.4 users must manually run python.exe Scripts\pywin32_postinstall.py -install from an elevated command prompt."
which I did not do first time round; I installed from a normal prompt getting the following feedback:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Python34\pythoncom34.dll
Copied pywintypes34.dll to C:\Python34\pywintypes34.dll
You do not have the permissions to install COM objects.
The sample COM objects were not registered.
etc.etc.
Finishing with "The pywin32 extensions were succesfully installed" ...
I only read the last sentence and I started to run some code resulting in getting these dll load fails.
So, did some research, and started an elevated prompt (how: see "http://www.sevenforums.com/tutorials/783-elevated-command-prompt.html") and again ran:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Windows\system32\pythoncom34.dll
Copied pywintypes34.dll to C:\Windows\system32\pywintypes34.dll
Registered: Python.Interpreter
Registered: Python.Dictionary
Registered: Python
-> Software\Python\PythonCore\3.4\Help[None]=None
-> Software\Python\PythonCore\3.4\Help\Pythonwin Reference[None]='C:\\Python34\\Lib\\site-packages\\PyWin32.chm'
Pythonwin has been registered in context menu
Shortcut for Pythonwin created
Shortcut to documentation created
The pywin32 extensions were successfully installed.
And now my code runs happily (as far as this matter is concerned... sigh, so much other stuff to do).
Run the installer as Administrator and it works:
Right click on pywin32-installer.exe
Choose "Run as Administrator"
As suggested above the post install script is not run, this issue can be seen when installing from a wheel (As I encountered)
python scripts\pywin32_postinstall.py -install
If find you have this issue when installing via wheels, then installing it from here can solve the above issue.
https://pypi.python.org/pypi/pypiwin32
There appears to be a bug in the installer. The recommended workaround in the ticket is the same one as proposed by Dave Bremer.
I could fix this situation by removing all installed Python3.4 versions (had forgotten to uninstall 3.4.1 before installing 3.4.2), deleting C:\Python34 and after installing Python 3.4.2 pywin32-219.win32-py34.exe could be installed and called without problems.
So, copying around DLLs should NOT be necessary!
I always install the Active State Python distro which installs the win32 packages for you and gets it right.
If the above didn't fix the problem, you're still missing the msvcr100.dll file. It's either in your \System32\ folder, or more likely in your c:\PythonXX\Lib\site-packages\win32\ folder.
That fixed it for me after hours of search to no avail, even though it looks like the import still isn't resolved as it should be (PyCharm still gives me the squiggly underline), but it works.
First I was using pip to install pywin32 in anaconda environment, that's why no matter what I did it was failing. After trial and error, I figured out that
conda install pywin32
is the right way to install pywin32 in the anaconda package manager.
I don't know whether it's too late or not to answer this question. I also hit this problem, and I tried every method above, but neither of them worked.
Finally, I found the reason. When we install pywin32, we must choose the one that fits python's version(2.6， 2.7， 3.3， etc) and python's bit number(x64 or x86). Notice, it must fit python's bit number, not PC's bit number. If you install x86 python in a x64 PC, you have to install a pywin32 with x86.
In my case i had to copy pywintypes26.dll and pythoncom26.dll files into C:\Windows\System32 folder to work it properly in jupyter notebook.
I am using windows 10 OS with multiple python versions
I have a situation very much like the one at Error "ImportError: DLL load failed: %1 is not a valid Win32 application", but the answer there isn't working for me.
My Python code says:
import cv2
But that line throws the error shown in the title of this question.
I have OpenCV installed in C:\lib\opencv on this 64-bit machine. I'm using 64-bit Python.
My PYTHONPATH variable: PYTHONPATH=C:\lib\opencv\build\python\2.7. This folder contains cv2.pyd and that's all.
My PATH variable: Path=%OPENCV_DIR%\bin;... This folder contains 39 DLL files such as opencv_core246d.dll.
OPENCV_DIR has this value: OPENCV_DIR=C:\lib\opencv\build\x64\vc11.
The solution at Error "ImportError: DLL load failed: %1 is not a valid Win32 application" says to add "the new opencv binaries path (C:\opencv\build\bin\Release) to the Windows PATH environment variable". But as shown above, I already have the OpenCV binaries folder (C:\lib\opencv\build\x64\vc11\bin) in my PATH. And my OpenCV installation doesn't have any Release folders (except for an empty one under build/java).
What's going wrong? Can I tell Python to verbosely trace the loading process? Exactly what DLL files is it looking for?
I noticed that, according to http://www.dependencywalker.com/, the cv2.pyd in C:\lib\opencv\build\python\2.7 is 32-bit, whereas the machine and the Python I'm running are 64-bit. Could that be the problem? And if so, where can I find a 64-bit version of cv2.pyd?
Unofficial Windows Binaries for Python Extension Packages
You can find any Python libraries from here.
Please check if the Python version you are using is also 64 bit. If not then that could be the issue. You would be using a 32-bit Python version and would have installed a 64 bit binaries for the OpenCV library.
Wow, I found yet another case for this problem. None of the above worked. Eventually I used python's ability to introspect what was being loaded. For Python 2.7, this means:
import imp
imp.find_module("cv2")
This turned up a completely unexpected "cv2.pyd" file in an Anaconda DLL directory that wasn't touched by multiple uninstall/install attempts. Python was looking there first and not finding my good installation. I deleted that cv2.pyd file and tried imp.find_module("cv2") again and python immediately found the right file and cv2 started working.
So if none of the other solutions work for you, make sure you use Python introspection to see what file Python is trying to load.
In my case, I have 64-bit Python, and it was lxml that was the wrong version--I should have been using the x64 version of that as well. I solved this by downloading the 64-bit version of lxml here:
https://pypi.python.org/pypi/lxml/3.4.1
lxml-3.4.1.win-amd64-py2.7.exe
This was the simplest answer to a frustrating issue.
I just had this problem. It turns out it was just because I was using an 64-bit version of the OpenCV file. I tried the x86 and it worked.
I had the same problem. Here's what I did:
I downloaded the pywin32 wheel file from here, then
I uninstalled the pywin32 module. To uninstall, execute the following command in a command prompt.
pip uninstall pywin32
Then, I reinstalled pywin32. To install it, open the command prompt in the same directory where the pywin32 wheel file lies. Then execute the following command.
pip install <Name of the wheel file with extension>
Wheel file will be like: piwin32-XXX-cpXX-none-win32.whl
It solves the problem for me.
I copied cv2.pyd file from /opencv/build/python/2.7/x86 folder instead of from /x64 folder to C:/Python27/Lib/site-packeges. I followed rest of the instructions provided here.
Added by someone else, not verified: I also copy file cv2.pyd to folder C:/Python27/Lib/site-packages/cv2. It works.
For me the problem was that I was using different versions of Python in the same Eclipse project. My setup was not consistent with the Project Properties and the Run Configuration Python versions.
In menu Project → Properties → PyDev, I had the Interpreter set to Python 2.7.11.
In Run Configurations → Interpreter, I was using the Default Interpreter. Changing it to Python 2.7.11 fixed the problem.
If your build system (CMake in my case) copies the file from <name>.dll to <name>.pyd, you will get this error if the original file wasn't actually a DLL file. In my case, building shared libraries got switched off, so the underlying file was actually a *.lib.
I discovered this error by loading the pyd file in Dependency Walker and finding that it wasn't valid.
Update NumPy.
pip install numpy --upgrade
It works for me!
This one worked for me:
pip install -- pywin32==227
I faced the same issue when I uninstalled and reinstalled a different version of 2.7.x of Python on my system using a 32-bit Windows Installer. I got the same error on most of my import statements.
I uninstalled the newly installed Python, downloaded a 64-bit Windows installer, reinstalled Python again, and it worked.
So I had problems installing vtk under Windows (as I use Python 3.7, there isn't any binary available so far. Just for older Python versions pip install vtk is not working)
I did wrote Python in my cmd:
Python 3.7.3 on win32
So I now know I have Python 3.7.3 running on a 32 bit.
I then downloaded the correct wheel at VTK‑8.2.0‑cp37‑cp37m‑win32.whl
Next I installed that wheel:
pip install VTK-8.2.0-cp37-cp37m-win32.whl
Then I tested it and it worked:
python
import vtk
I experienced the same problem while trying to write code concerning speech-to-text.
The solution was very simple. Uninstall the previous pywin32 using the pip method:
pip uninstall pywin32
The above will remove the existing one which is by default for 32 bit computers. And install it again using
pip install pywin32
This will install the one for the 64 bit computer which you are using.
I had a similar issue while trying to run uvicorn,
Creating a new virtual environment and reinstalling the python packages worked
You can install opencv from official or unofficial sites.
Refer to this question and this issue if you are using Anaconda.
It has a very simple solution.
After installing opencv
place
cv2.pyd from C:\opencv\build\python\2.7\ **x64** to C:\Python27\Lib\site-packages
instead of, place cv2.pyd from C:\opencv\build\python\2.7\ **x86** to C:\Python27\Lib\site-packages
I got this error when trying to import MySQLdb.
What worked for me was to uninstall Python and then reinstall it.
I got the error after installing npm (https://www.npmjs.com/get-npm). One thing it did was install Python even though I already had it.
First I copied cv2.pyd from /opencv/build/python/2.7/x86 to C:/Python27/Lib/site-packeges. The error was
"RuntimeError: module compiled against API version 9 but this version of numpy is 7"
Then I installed numpy-1.8.0-win32-superpack-python2.7.exe and OpenCV works fine.
>>> import cv2
>>> print cv2.__version__
2.4.13
Please make sure that you have installed a Python 2.7.12 or below version. Otherwise you will definitely get this error.
Make sure the Oracle client is 64 bit installed if the OS is 64 bit.
Make sure the Microsoft Visual C++ compiler for Python 2.7 is 64 for bit for a 64 bit OS or 32 bit for 32 bit.
Note: If your OS is 64 bit, install all packages of 64 bit or if the OS is 32 bit, install the 32-bit package.
This has worked for me. I have tried different methods, but this was my best solution.
Open a command prompt and type the following;
pip install opencv-python
(Make sure your Internet connection is on.)
After that, try importing it again.
It could also be that your Anaconda version is 32 bit when it should be 64 bit.
If you are using pycharm I go to settings -> python interpretation and click the + button and search for the name on the list of python packages there
An image showing where to go when you want to install something
I found the solution. Maybe you can try to use the cmd window rather than the Anaconda prompt window to start your first Scrapy test.
When running python26 under windows OS (64bits).....
I have got errors like:
import win32api" error in Python 2.6: pywintypes26.dll
or
pythoncom26.dll missing
ImportError: DLL load failed: The specified module could not be found.
I have done the msi installation for python26
all dlls can be found under C:\Python26\Lib\site-packages\pywin32_system32
After I copy pywintypes26.dll and pythoncom26.dll from C:\Python26\Lib\site-packages\pywin32_system32 to C:\Python26\Lib\site-packages\win32 -> Solve the problem!
I also hit a problem importing win32api.
The post-install script for pywin32 failed, which should copy pythoncom26.dll, pythoncomloader26.dll, and pywintypes26.dll, among other things. I ran it by hand and my installation was fixed.
python scripts\pywin32_postinstall.py -install
I had a similar problem when installing under 64 bit Python 3.4.2. I ran the install executable pywin32‑219.win‑amd64‑py3.4.exe from http://www.lfd.uci.edu/~gohlke/pythonlibs/ .
On the site it states clearly:
"Python 3.4 users must manually run python.exe Scripts\pywin32_postinstall.py -install from an elevated command prompt."
which I did not do first time round; I installed from a normal prompt getting the following feedback:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Python34\pythoncom34.dll
Copied pywintypes34.dll to C:\Python34\pywintypes34.dll
You do not have the permissions to install COM objects.
The sample COM objects were not registered.
etc.etc.
Finishing with "The pywin32 extensions were succesfully installed" ...
I only read the last sentence and I started to run some code resulting in getting these dll load fails.
So, did some research, and started an elevated prompt (how: see "http://www.sevenforums.com/tutorials/783-elevated-command-prompt.html") and again ran:
c:\python34>python.exe Scripts\pywin32_postinstall.py -install
Copied pythoncom34.dll to C:\Windows\system32\pythoncom34.dll
Copied pywintypes34.dll to C:\Windows\system32\pywintypes34.dll
Registered: Python.Interpreter
Registered: Python.Dictionary
Registered: Python
-> Software\Python\PythonCore\3.4\Help[None]=None
-> Software\Python\PythonCore\3.4\Help\Pythonwin Reference[None]='C:\\Python34\\Lib\\site-packages\\PyWin32.chm'
Pythonwin has been registered in context menu
Shortcut for Pythonwin created
Shortcut to documentation created
The pywin32 extensions were successfully installed.
And now my code runs happily (as far as this matter is concerned... sigh, so much other stuff to do).
Run the installer as Administrator and it works:
Right click on pywin32-installer.exe
Choose "Run as Administrator"
As suggested above the post install script is not run, this issue can be seen when installing from a wheel (As I encountered)
python scripts\pywin32_postinstall.py -install
If find you have this issue when installing via wheels, then installing it from here can solve the above issue.
https://pypi.python.org/pypi/pypiwin32
There appears to be a bug in the installer. The recommended workaround in the ticket is the same one as proposed by Dave Bremer.
I could fix this situation by removing all installed Python3.4 versions (had forgotten to uninstall 3.4.1 before installing 3.4.2), deleting C:\Python34 and after installing Python 3.4.2 pywin32-219.win32-py34.exe could be installed and called without problems.
So, copying around DLLs should NOT be necessary!
I always install the Active State Python distro which installs the win32 packages for you and gets it right.
If the above didn't fix the problem, you're still missing the msvcr100.dll file. It's either in your \System32\ folder, or more likely in your c:\PythonXX\Lib\site-packages\win32\ folder.
That fixed it for me after hours of search to no avail, even though it looks like the import still isn't resolved as it should be (PyCharm still gives me the squiggly underline), but it works.
First I was using pip to install pywin32 in anaconda environment, that's why no matter what I did it was failing. After trial and error, I figured out that
conda install pywin32
is the right way to install pywin32 in the anaconda package manager.
I don't know whether it's too late or not to answer this question. I also hit this problem, and I tried every method above, but neither of them worked.
Finally, I found the reason. When we install pywin32, we must choose the one that fits python's version(2.6， 2.7， 3.3， etc) and python's bit number(x64 or x86). Notice, it must fit python's bit number, not PC's bit number. If you install x86 python in a x64 PC, you have to install a pywin32 with x86.
In my case i had to copy pywintypes26.dll and pythoncom26.dll files into C:\Windows\System32 folder to work it properly in jupyter notebook.
I am using windows 10 OS with multiple python versions