I'm trying to debug some python code using VS code. I'm getting the following error about a module that I am sure is installed.
Exception has occurred: ModuleNotFoundError
No module named 'SimpleITK'
File "C:\Users\Mido\Desktop\ProstateX-project\src\01-preprocessing\03_resample_nifti.py", line 8, in <module>
import SimpleITK as sitk
I installed the module using
sudo pip install SimpleITK
I know that it was installed because I was getting a similar error when I ran the code through the command line, and it was fixed by doing the above. I don't understand why VS code does not recognize that
After installing a new module via pip reloading vscode may work if vscode doesn't recognize it. To do this, make sure that the module is installed inside the virtual environment by creating and activating a virtualenv:
python3 -m venv env
source env/bin/activate
Make sure to use the correct way of installing a module with pip:
python3 -m pip install {new_module}
Replace the string "{new_module}" with your module name. After that, make sure to reload vscode by clicking Ctrl+Shift+P, and selecting Reload window.
Now vscode will know the new module and autocompletion works.
sudo pip install is most likely installing globally into a Python interpreter that is different than the one that you have selected in VS Code. Please select the Python interpreter you want to use and then install explicitly using that interpreter (if you're not using a virtual environment then use something like /path/to/python -m pip install SimpleITK, although I strongly recommend using a virtual environment and to not install packages globally).
In Mac, correctly selecting the Python Interpreter worked for me:
From within VS Code, select a Python 3 interpreter by opening the Command Palette (⇧⌘P), start typing the Python: Select Interpreter command to search, then select the command. You can also use the Select Python Environment option on the Status Bar if available (it may already show a selected interpreter, too):
No interpreter selected
The command presents a list of available interpreters that VS Code can find automatically, including virtual environments. If you don't see the desired interpreter, see Configuring Python environments.
Source :VS Code Select Interpreter
This error: your vscode use other python version. This solution change vscode use current python.
In terminal find current python version:
py --version
In vscode Press Ctrl+Shift+P then type:
Python: Select Interpreter
Select current python version
I ran into this problem with VSCode and resolved it by setting my Python interpreter within VSCode to the same as the one in my system path (type "echo %PATH%" on Windows and look for Python) via the process here: https://code.visualstudio.com/docs/python/python-tutorial#_select-a-python-interpreter
There are a lot of proposed answers that suggest changing the launch.json or the settings.json file. However, neither of these solutions worked for me.
My situation:
Is Python environment selected? yes
Does the Terminal recognize Python environment? yes
Can I run the Python code from the activated Terminal? yes
Does the code run w/o error when I use "Start Debugging"? yes
Does the code run when I click "Run Code"? no
The only solution that worked for me is to:
Open Windows Terminal (or cmd)
Activate environment: conda activate <environment_name>
Open Visual Studio Code from Terminal: code
Then, "Run Code" (#5) works without any issues.
Source:
"module not found error" in VS Code using Conda - l3d00m's answer
Faced similar issue and here is how I fixed it. Remember that there are multiple ways to run your code in VS code. And for each way you may end up with different interpreters and environments. For example:
1. Creating virtual env and installing libraries
In my case I opted into creating virtual environment and doing so outside of VS Code using command prompt:
python -m venv .plotting_test
Following that I activated it:
.plotting_test\Scripts\activate.bat
Following that I installed additional libraries:
python -m pip install matplotlib
Following that I made sure to see it was all installed ok:
python -m pip list
And I also checked where for current directory:
cd
2. Point VS Code & VS Code Code Runner to virtual environment
Opened vs code, closed previous workspaces, opened new folder, created test.py as I was starting new. Pressed ctrl + shift + p. Selected ```Python: Select Interpreter``:
Followed by + Enter interpreted path
Navigated to directory from last step from section 1. Found my virtual environment folder created in step one and pointed VS code to that version's python.exe in Scripts:
Verified I am pointed to such:
Saved as workspace so that I can create default workspace settings for this project:
In workspace settings files defined paths to my virtual environment created n step 1 for workspace interpreter & CODE RUNNER(!):
"settings": {
"python.defaultInterpreterPath": "C:/Users/yyguy/.plotting_test/Scripts/python.exe",
"code-runner.executorMap": {"python": "call C:/Users/yyguy/.plotting_test/Scripts/activate.bat && python -u"}
}
}
Reloaded window just to make sure (ctrl + shift + p) = "Developer: Reload Window"
Now run code and run python file should be execute under your specified envs:
Try running pip list in VS Code to check if the module is installed, next check if your python version is correct/supports that version of SimpleITK. It may be a problem with the python interpreter that you are using for VS Code (ie. the module may be installed on a different python instance than the one your VS Code is using)
Is Python environment selected?
Does the Terminal recognize the Python environment?
Can I run the Python code from the activated Terminal?
Does the code run w/o error when I use "Start Debugging"?
if the answer to the above is "yes."
Then,
Try running the Code using the option "Run python file in terminal" (in code runner extension). And assign a new shortcut for that for future use...
How to fix module not found error in Visual Studio code?
To Solve VSCode ModuleNotFoundError: No module named X Error Make sure you are running from the package folder (not from package/module ) if you want import module. calculations to work. You can also set the PYTHONPATH environment variable to the path to the package folder.
Once you have created a virtual environment, and installed your required packages in that environment, close VS code. For Windows platform, open command prompt and navigate to the folder where your virtual env folder is created. And then launch VS code from there using the command code .
For ex: My virtual env name is .imgenv, and its inside C:\py_stuff\projects
So, I navigate to C:\py_stuff\projects and then type code .
Now, your VS code should recognize the packages !
I just ran into the same issue. I found that if I selected all text before shift enter the script would compile as a file instead of as a single line.
I had the same problem. I bet you have a shebang statement at the top of your file.
If you do.
Visual Studios settings
Under "Code-runner->Code-runner: Respect Shebang" section or just do a search for "Code-runner: Respect Shebang"
Uncheck weather to respect Shebang to run code.
Now it will run under the virtual environment and find the modules that you installed using pip! :)
I struggled with this for a very long time, and had tried almost every other answer. I wasn't using pip, so that wasn't the issue. But still VS Code wasn't finding the modules that were installed in the Selected Interpreter.
Ultimately it came down to old conflicts that existed because I switched to miniconda, and VS Code was still looking for anaconda3.
I completely wiped VS Code and its associated files (cache, preference files, etc.) from my machine (some instructions), and installed a clean version.
This now syncs as expected with miniconda.
If you have different python versions installed, be sure you install module with right one.
python -m pip install <module>
or
python3 -m pip install <module>
Run your environment from a directory not in the users directory. I solved my problem running my environment from C:\Code\ProjectA\
I discovered my problem by running:
IMPORT os
Mycwd = os.getcwd()
PRINT(Mycwd)
.venv/Lib/SitePackages is the default directory where Vscode looks for Modules.
This directory is automatically created on creating .venv via the command Pallete.
External modules installed via pip are placed in this directory by default.
Place self created modules inside this folder manually.
For mac users
In the terminal check which python you are using by command which python. It will give you the path of the python interpreter path. After that type cmd shift P and type Python: Select interpreter.
After that select + Enter interpreter path and paste the path which you got after running the command which python.
I have installed Jupyter on Windows 10, Python 3.x via
$ pip install jupyter
The installation works fine, even though I did restart the terminal.
But trying to run
$ jupyter notebook
gives the following error
'jupyter' is not recognized as an internal or external command, operable program or batch file.
How and where do I find the executable for Jupyter?
If you are absolutely sure that your Python library path is in your system variables (and you can find that path when you pip install Jupyter, you just have to read a bit) and you still experience "command not found or recognized" errors in Windows, you can try:
python -m notebook
For my Windows at least (Windows 10 Pro), having the python -m is the only way I can run my Python packages from command line without running into some sort of error
Fatal error in launcher: Unable to create process using ' "
or
Errno 'THIS_PROGRAM' not found
Please try either of these commands first;
$ py -m notebook
$ python -m notebook
for jupyterlab users
py -m jupyterlab
Otherwise
$ python -m pip install jupyter --user
$ jupyter notebook
If this does not work.
pip does not add jupyter directly to path for local.
The output from
$ which python
/c/Users/<username>/AppData/Local/Programs/Python/Python35-32/python
After some digging I found a executable for jupyter in the folder:
C:\Users\<username>\AppData\Roaming\Python\Python35\Scripts\jupyter.exe
Difference between local and roaming folder
So if you want to be able to execute a program via command line, you need to add it into the %PATH variable. Here is a powershell script to do it. BE SURE TO ADD THE ";" before adding the new path.
$ [Environment]::SetEnvironmentVariable("Path", $env:Path + ";C:\Users\<username>\AppData\Roaming\Python\Python35\Scripts", [EnvironmentVariableTarget]::User)
Update:
if you are using python3, switch out python with python3
but I encourage you to use pyenv instead :)
I had the exact same problem and it was driving me crazy. Other answers provide a solution, but they don't explain why you and I are having this problem.
I will try to explain why this is happening and then provide some solutions.
You can go to the end to see the TL;DR.
1)What's going on? Why is this error happening?
I'll try to make a step-by-step answer so everything is explained clearly.
If you think it's too basic at the beginning, go to the end of this "article".
I'll first start with common things like running the python shell from the terminal or running pip. You'll see why you can do that from the terminal and we'll end up on why and how you can run the jupyter notebook from the terminal as well.
Ready? Let's start!
Have you ever wondered why you can type python in the terminal (command prompt) and suddenly start the Python interpreter?
Microsoft Windows [Version 10.0.18363.1440]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Users\YOUR-USERNAME>python
Python 3.9.1 (tags/v3.9.1:1e5d33e, Dec 7 2020, 17:08:21) [MSC v.1927 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>
You probably already know (but maybe don't) that this is because Python was added to the Windows PATH environment variable. You probably did it at installation time or afterwards.
But, what is this PATH environment variable?
It basically allows you to run any executables, that are located inside
the paths specified in the variable, at the command prompt without
having to give the full path to the executable.
You can check the content of that PATH variable with:
>>> import sys
>>> for path in sys.path:
print(path)
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\python39.zip
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\DLLs
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\lib
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\lib\site-packages
... (some other paths were taken out for clarity)
You can see this folder: C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39. This is the place where Python version 3.9 is installed. Let's check its content:
<DIR> DLLs
<DIR> Doc
<DIR> etc
<DIR> include
<DIR> Lib
<DIR> libs
<DIR> Scripts
<DIR> share
<DIR> tcl
<DIR> Tools
LICENSE.txt
NEWS.txt
python.exe
python3.dll
python39.dll
pythonw.exe
vcruntime140.dll
vcruntime140_1.dll
Voilà! We have the python.exe file (an executable). We have a Python executable file in the PATH, that's why you can start the Python interpreter from the terminal with just typing python. If this wasn't the case you would have to type the full path to the executable file in the terminal:
C:\Users\YOUR-USERNAME> C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\python)
Instead of just:
C:\Users\YOUR-USERNAME> python
And what about when you use pip?
It's the same principle. You can run pip from the terminal because there is a pip executable file in the PATH variable.
If you go to C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\Scripts\ (which is in the PATH showed above) you'll see many executables files. One of them is pip. Actually I have three versions: pip, pip3.9 and pip3.
The Scripts folder allows exectuable files to be run from the terminal. Like pip or other libraries that you intend to run directly from the terminal. The Scripts folder:
...is not intended for you, it's for scripts that are installed as
components of modules that you install. For example, pip is a module,
but it also has a wrapper script by the same name, pip, which will be
installed in that directory.
If you put something there and it is properly in your PATH, then it
should be executable
That wrapper script would be the pip executable file. When this executable file is run, it locates the pip folder in the Python installation folder and runs pip.
But you could also run pip directly from the installation folder (C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\Lib\site-packages), without needing the executable pip file.
But, how can you do it?
I'm glad you ask. There is a Python way to run modules as the main module (without the need to import it).
python -m pip
When you run a module directly its name becomes __main__. What -m does is:
Search sys.path for the named module and execute its contents as the __main__ module.
What is __main__?
'__main__' is the name of the scope in which top-level code executes.
A module’s __name__ is set equal to '__main__' when read from standard
input, a script, or from an interactive prompt.
...
I guess that the pip executable does something similar, or at least, has the same effect: to start pip.
2)What does this have to do with the Jupyter Notebook?!
Think of the Jupyter Notebook as the same as pip. If you want to run jupyter in the terminal, you need an executable that it's on the PATH.
We have already seen that the executables of modules like pip or jupyter are located here C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\Scripts\.
If I check the content of the folder I see this:
easy_install-3.9.exe
easy_install.exe
f2py.exe
jsonschema.exe
jupyter-bundlerextension.exe
jupyter-console.exe
jupyter-nbconvert.exe
jupyter-nbextension.exe
jupyter-notebook.exe
jupyter-qtconsole.exe
jupyter-serverextension.exe
jupyter-trust.exe
pip.exe
pip3.9.exe
pip3.exe
I see the already mentioned pip, pip3.9 and pip3. But I don't see jupyter (the word "jupyter" alone).
If I type jupyter in the terminal I get the error that started all:
'jupyter' is not recognized as an internal or external command, operable program or batch file.
Finally we've reached an answer to your question!!!
'jupyter' is not recognized as a command because there is no executable file in the Scripts folder called jupyter.
So, let's try a different executable. What about jupyter-notebook?
BINGO! The notebook is running!
Serving notebooks from local directory:
C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\Scripts
Jupyter Notebook 6.3.0 is running at:
http://localhost:8888/?token=... (edited)
or http://127.0.0.1:8888/?token=... (edited)
Use Control-C to stop this server and shut down all kernels (twice to skip confirmation).
I don't know why I don't have a jupyter executable called 'jupyter'. The official documentation says to use jupyter notebook on the terminal, but it seems that in some cases it doesn't work. And I think it has to do with what I mentioned above: there is no jupyter exectuable in the Scripts folder.
If you remember, I told you that you can run pip as the main module using python -m pip.
It happens that you can do the same with jupyter.We just need to know how to call it. As in with pip, we have to check the folder where 3rd party libraries are installed: C:\Users\YOUR-USERNAME\AppData\Local\Programs\Python\Python39\Lib\site-packages.
You'll see jupyter_console, but this just creates an interactive notebook in the terminal, not exactly what you were looking for. You're also going to find folders ending with .dist.info, like jupyter_console-6.4.0.dist-info. This is just metadata of the Wheel Binary Package builder. You'll also see a folder like jupyterlab_pygments, but that's for JupyterLab. We want to use the classic Jupyter notebook.
What we want is to run notebook. How do we know this?
You'll see in the folder site-packages the folder (package) notebook. Inside there is a file called __main__.py:
#__main__.py
if __name__ == '__main__':
from notebook import notebookapp as app
app.launch_new_instance()
It's calling notebookapp.py which is a "A tornado based Jupyter notebook server." Yes, this is what we need.
We can see that launch_new_instance in the notebookapp calls launch_instance(), which "launches an instance of a Jupyter Application".
Perfect! We are in the correct folder. To run the jupyter notebook from the Python interactive shell we have to run the notebook package with:
python -m notebook
3)*** SUMMARY: SOLUTION ***
tl;dr:
I have explained and showed why this error is happening.
Now let's summarize the solutions:
To know the name of the jupyter executable (in the Scripts folder), so you can run directly from the terminal (Command Prompt) as:
jupyter notebook
or as:
jupyter-notebook
Or whatever name you have.
Run the notebook as the main module from Python:
python -m notebook
I hope this helps you as much as it helped me. I'm open to your comments and suggestions.
I had the same problem, but
py -m notebook
worked for me.
I got Jupyter notebook running in Windows 10. I found the easiest way to accomplish this task without relying upon a distro like Anaconda was to use Cygwin.
In Cygwin install python2, python2-devel, python2-numpy, python2-pip, tcl, tcl-devel, (I have included a image below of all packages I installed) and any other python packages you want that are available. This is by far the easiest option.
Then run this command to just install jupyter notebook:
python -m pip install jupyter
Below is the actual commands I ran to add more libraries just in case others need this list too:
python -m pip install scipy
python -m pip install scikit-learn
python -m pip install sklearn
python -m pip install pandas
python -m pip install matplotlib
python -m pip install jupyter
If any of the above commands fail do not worry the solution is pretty simple most of the time. What you do is look at the build failure for whatever missing package / library.
Say it is showing a missing pyzmq then close Cygwin, re-open the installer, get to the package list screen, show "full" for all, then search for the name like zmq and install those libraries and re-try the above commands.
Using this approach it was fairly simple to eventually work through all the missing dependencies successfully.
Cygwin package list
Once everything is installed then run in Cygwin goto the folder you want to be the "root" for the notebook ui tree and type:
jupyter notebook
This will start up the notebook and show some output like below:
$ jupyter notebook
[I 19:05:30.459 NotebookApp] Serving notebooks from local directory:
[I 19:05:30.459 NotebookApp] 0 active kernels
[I 19:05:30.459 NotebookApp] The Jupyter Notebook is running at:
[I 19:05:30.459 NotebookApp] Use Control-C to stop this server and shut down all kernels (twice to skip confirmation).
Copy/paste this URL into your browser when you connect for the first time, to login with a token:
http://localhost:8888/?token=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
In Python 3.7.6 for Windows 10. After installation, I use these commands.
1. pip install notebook
2. python -m notebook
OR
C:\Users\Hamza\AppData\Local\Packages\PythonSoftwareFoundation.Python.3.7_qbz5n2kfra8p0\LocalCache\local-packages\Python37\Scripts
.
For my pc python-scripts are located in the above path. You can add this path in environment variables. Then run command.
1. jupyter notebook
You can add the following to your path
C:\[Python Installation path]\Scripts
e.g. C:\Python27\Scripts
It will start working for jupyter and every other pip install you will do here on.
Check whether you have given python PATH in environmental variables properly.
If not, then set python path. Then use:
$ python -m notebook
If you are using the Anaconda distribution, make sure when installing it that you check the "Change PATH" option.
first you should make sure that you are put your python path in your system variables ..
Then try run this
python -m pip install jupyter --user
and then
run this
py -m notebook or jupyter notebook
In Windows 10 you can use ipython notebook. It works for me.
I added
c:\users\[user]\appdata\roaming\python\python37\site-packages
to the path and it worked.
## windows CMD
for default install (just check "add path" and "next" when installing)
python -m notebook
for custom install in C:\
jupyter notebook
Problem for me was that I was running the jupyter command from the wrong directory.
Once I navigated to the path containing the script, everything worked.
Path-
C:\Program Files (x86)\Microsoft Visual Studio\Shared\Python37_64\Scripts
I have two python version installed:
1. Python 3.8.2: This was installed independently
2. Python 3.7.6: This was installed along with Anaconda 3
Multiple versions caused conflict even after setting the path variables correctly.
I have uninstalled the Python 3.8.2 and after restart, the command
jupyter notebook
Worked perfectly :)
you can create a batch file and search for Jupiter in your windows search and ooen its properties and you will get this string.
D:\anaconda3\python.exe D:\anaconda3\cwp.py D:\anaconda3 D:\anaconda3\python.exe D:\anaconda3\Scripts\jupyter-notebook-script.py "%USERPROFILE%/"
after getting this you can create a jupitor.bat file with this content it that
and you can save that file in a script folder in d or any drive and add the path of your script file in your environmental path
and then you can easly call this by typing jupitor in cmd.
To install I used
"pip install notebook" in windows command line
To run python -m notebook did not work for me, but python3 -m notebook worked
First run this command
pip install jupyter
then add system variable path , this path is where jupyter and other scripts are located
PATH = C:\Users<userName>\AppData\Roaming\Python\Python38\Scripts
e.g PATH=C:\Users\HP\AppData\Roaming\Python\Python38\Scripts
After that we can run jupyter from any folder/directory
jupyter notebook
I just found that error when I first intalled and run the jupyter notebook. Then I found the executable (.exe) file from
C:\Users\<user-name>\AppData\Local\Programs\Python\Python39\Scripts.
The actual file name was "jupyter-notebook".
The installation guide says it as "jupyter notebook" to run the server. You have to run the command "jupyter-notebook" in the command line and it will be run. Thanks!
My problem was my user's folder had a space in folder name.
After creating a new user and switching to that windows user, windows shortcuts and links from within' Anaconda worked fine.
Windows 8.1 64 Bit. Latest Anaconda.
Note: I ended up uninstalling an reinstalling Anaconda but my sense is the problem was really just the space in the windows user username/user folder.
Using python 3.6.3. Here after installing Jupyter through command 'python -m pip install jupyter', 'jupyter notebook' command didn't work for me using windows command prompt.
But, finally 'python -m notebook' did work and made jupyter notebook to run on local.
http://localhost:8888/tree
Here is how I resolved stated issue, hope it helps:
install python 3.7 using official website for python, while installing include installing PATH by checking it's box
after that open cmd (be sure to open it after step 1) and write: pip install jupyter ENTER
now you should be able to open jupyter notebook by using command: jupyter notebook
Seems simple, but it may as well help.
In windows 10:
If you used anaconda3 for Jupyter notebook installation and forgot to check the box to add the environment variables to the system during installation, you need to add the following environment variables to the "Path" variable manually:
(search windows settings for Edit environment variables")
Environment variables for Anaconda3
If you have installed jupyter with
"python -m pip install jupyter" command
instead of
"$ pip install jupyter" command
then follow these steps:
Create a notepad
Change its extension from ".txt" to ".ipynb"
Right click it and click "open with"
In the pop up, go to - C:\Users\<"windows_user_name">\AppData\Roaming\Python\Python38\Scripts
Click on "jupyter-lab.exe"
100% working solution:
Follow these steps:
Open the folder where you downloaded "python-3.8.2-amd64.exe" setup or any other version of python package
Double click on "python-3.8.2-amd64.exe'
Click "Modify"
You will see "Optional features"
Click "next"
Select "Add python to environment variables"
Click "install"
Then u can run jupyter in any desired folder u desire
E.g open "cmd" command prompt
Type :
E:
E:\>jupyter notebook
It will get started without showing
'Jupyter' is not recognized
Thanks
I was facing the same issue in windows7, as i just recoverd my computer with the help of recovery point and after that notebook just stopped working. I tried to change the path setting but nothing was working so I just simply uninstalled the python with the application from which it was installed and after that I installed it again. After that I installed jupyter notebook again and then it worked fine.
Thanks
I just installed JupyterLab on top of my Python 3.8/pip enabled Win10 machine, so I ran into these startup problem with windows.
If everything is ok (check that you have PATH for Python, eg. C:\Users[Username]\AppData\Local\Programs\Python\Python38-32\Scripts) you simply run:
jupyter-lab.exe
and that's it.
Cheers
Add system variable path, this path is where jupyter and other scripts are located
PATH -->
`C:\Users\<userName>\AppData\Roaming\Python\Python39\Scripts`
Like in my laptop PATH is:
"C:\Users\developer\AppData\Roaming\Python\Python39\Scripts"
After that, You will be able to run jupyter from any folder & any directory by running the below command
jupyter notebook
Had the same issue. Finally searched where jupyter.exe directory was located on my computer. For some reason it was under
C:\VTRoot\HarddiskVolume4\Users[user]\AppData\Local\Programs\Python
Whereas the Python is
C:\Users[user]\AppData\Local\Programs\Python
So I copied full Python39 folder from VTRoot to main Python39 python folder in AppData. And the issue is solved.
First check where your python is installed by heading over to
C:\Users\**username**\AppData\Local\Programs\Python\Python39\Scripts
this is the path usually you will find python installed. After this type in
cd.. to get one step out of the Scripts folder
After this install jupyter in here using:
$ pip install jupyter
The installation was fine and when I tried to open the jupyter notebook, it gave me the following error.
'jupiter is not recognized as an internal or external command, operable program or batch file.
I checked a lot of resources but still, I faced the same problem. After doing a lot of stuff from the internet, I myself figured out that maybe due to some updates(for some users) it won't open by typing the command
jupyter notebook
Instead, you have to type
jupyter-notebook
The only thing I was missing was this Hyphen-minus. Hope this works for you too.