I have come across an interesting phenomenon when scraping a particular site on the web. The issue arises when using Python's urllib2 (Python 2.7). For example:
import urllib2
LINK = "http://www.sample.com/article/1"
HEADERS = {'User-Agent': 'Mozilla5.0/...'} # Ellipsis for brevity
req = urllib2.Request(link, data=None, headers=HEADERS)
resp = urllib2.urlopen(req, timeout=20).read()
Here are the strange outcomes:
1) When a valid user agent is passed to the request headers, the server will return a status of 200 and a page saying there was an issue processing the request (invalid html). This means I am able to get a successful response from the server with corrupted data.
2) When an invalid user agent is passed (empty headers {}), the server will timeout. However, if the timeout is set to a large value (20 seconds in this example), the server will then return the valid data but in a slow fashion.
This problem arises on the server when there has been no prior requests, therefore I believe the server may be expecting a certain cookie from the request to serve valid data. Anyone have insight into why this is happening?
You can't know what's going-on on the server side.
You can just keep experiment and guess how it works on the other side. If this is a user agent only issue - just keep sending it(and maybe changing it once in awhile) for ALL of your requests, including the first one.
Also, I would open chrome dev tool on a new session(incognito) and recording all the actions you're doing, this way you can see the structure of the requests that being made by a real browser.
Related
I would like to fetch the JSON data used to plot this chart here using Python's requests library. Inspecting the Network panel via Dev. Tools, I was able to find the URL of the respective GET request (gHistoricoPIBovespa.aspx?periodo=completo). One can visualize the response from within the panel and confirm that this is the correct data. However, if one tries to simply open this link, the server denies the access. It reads:
Access Denied
Due to daily attempted attacks on the site, we do not allow: Access
via VPN, multiple simultaneous requests and access from abroad (mainly
Asia). If you are a legitimate user and not a robot, send an email to
contato#oceans14.com.br informing your IP address: .... We
will get back to you informing you whether your IP address has been
unblocked or not.
I am not a Web Developer, but I always thought that the server cannot tell if a request is being sent via browser or script without captcha. I also don't see special authentication headers or parameters (plese let me know if I'm wrong).
I was trying something along these lines
import requests
url = "https://www.oceans14.com.br/rendaVariavel/respostaAjax/gHistoricoPlBovespa.aspx?periodo=completo"
payload = {'periodo': 'completo'}
headers = {'x-requested-with': 'XMLHttpRequest'}
data = requests.get(url, data=payload, headers=headers)
print(data.text)
This gives the html of the access denial page. Clarification on my misconceptions and a possible working script would be much appreciated!
As pointed out by Trock on the comments section, there are multiple verification methods I was not aware of.
This website in particular required the Referer and Cookie headers for the request to be sent successfully.
I would like to try send requests.get to this website:
requests.get('https://rent.591.com.tw')
and I always get
<Response [404]>
I knew this is a common problem and tried different way but still failed.
but all of other website is ok.
any suggestion?
Webservers are black boxes. They are permitted to return any valid HTTP response, based on your request, the time of day, the phase of the moon, or any other criteria they pick. If another HTTP client gets a different response, consistently, try to figure out what the differences are in the request that Python sends and the request the other client sends.
That means you need to:
Record all aspects of the working request
Record all aspects of the failing request
Try out what changes you can make to make the failing request more like the working request, and minimise those changes.
I usually point my requests to a http://httpbin.org endpoint, have it record the request, and then experiment.
For requests, there are several headers that are set automatically, and many of these you would not normally expect to have to change:
Host; this must be set to the hostname you are contacting, so that it can properly multi-host different sites. requests sets this one.
Content-Length and Content-Type, for POST requests, are usually set from the arguments you pass to requests. If these don't match, alter the arguments you pass in to requests (but watch out with multipart/* requests, which use a generated boundary recorded in the Content-Type header; leave generating that to requests).
Connection: leave this to the client to manage
Cookies: these are often set on an initial GET request, or after first logging into the site. Make sure you capture cookies with a requests.Session() object and that you are logged in (supplied credentials the same way the browser did).
Everything else is fair game but if requests has set a default value, then more often than not those defaults are not the issue. That said, I usually start with the User-Agent header and work my way up from there.
In this case, the site is filtering on the user agent, it looks like they are blacklisting Python, setting it to almost any other value already works:
>>> requests.get('https://rent.591.com.tw', headers={'User-Agent': 'Custom'})
<Response [200]>
Next, you need to take into account that requests is not a browser. requests is only a HTTP client, a browser does much, much more. A browser parses HTML for additional resources such as images, fonts, styling and scripts, loads those additional resources too, and executes scripts. Scripts can then alter what the browser displays and load additional resources. If your requests results don't match what you see in the browser, but the initial request the browser makes matches, then you'll need to figure out what other resources the browser has loaded and make additional requests with requests as needed. If all else fails, use a project like requests-html, which lets you run a URL through an actual, headless Chromium browser.
The site you are trying to contact makes an additional AJAX request to https://rent.591.com.tw/home/search/rsList?is_new_list=1&type=1&kind=0&searchtype=1®ion=1, take that into account if you are trying to scrape data from this site.
Next, well-built sites will use security best-practices such as CSRF tokens, which require you to make requests in the right order (e.g. a GET request to retrieve a form before a POST to the handler) and handle cookies or otherwise extract the extra information a server expects to be passed from one request to another.
Last but not least, if a site is blocking scripts from making requests, they probably are either trying to enforce terms of service that prohibit scraping, or because they have an API they rather have you use. Check for either, and take into consideration that you might be blocked more effectively if you continue to scrape the site anyway.
One thing to note: I was using requests.get() to do some webscraping off of links I was reading from a file. What I didn't realise was that the links had a newline character (\n) when I read each line from the file.
If you're getting multiple links from a file instead of a Python data type like a string, make sure to strip any \r or \n characters before you call requests.get("your link"). In my case, I used
with open("filepath", 'w') as file:
links = file.read().splitlines()
for link in links:
response = requests.get(link)
In my case this was due to fact that the website address was recently changed, and I was provided the old website address. At least this changed the status code from 404 to 500, which, I think, is progress :)
I would like to try send requests.get to this website:
requests.get('https://rent.591.com.tw')
and I always get
<Response [404]>
I knew this is a common problem and tried different way but still failed.
but all of other website is ok.
any suggestion?
Webservers are black boxes. They are permitted to return any valid HTTP response, based on your request, the time of day, the phase of the moon, or any other criteria they pick. If another HTTP client gets a different response, consistently, try to figure out what the differences are in the request that Python sends and the request the other client sends.
That means you need to:
Record all aspects of the working request
Record all aspects of the failing request
Try out what changes you can make to make the failing request more like the working request, and minimise those changes.
I usually point my requests to a http://httpbin.org endpoint, have it record the request, and then experiment.
For requests, there are several headers that are set automatically, and many of these you would not normally expect to have to change:
Host; this must be set to the hostname you are contacting, so that it can properly multi-host different sites. requests sets this one.
Content-Length and Content-Type, for POST requests, are usually set from the arguments you pass to requests. If these don't match, alter the arguments you pass in to requests (but watch out with multipart/* requests, which use a generated boundary recorded in the Content-Type header; leave generating that to requests).
Connection: leave this to the client to manage
Cookies: these are often set on an initial GET request, or after first logging into the site. Make sure you capture cookies with a requests.Session() object and that you are logged in (supplied credentials the same way the browser did).
Everything else is fair game but if requests has set a default value, then more often than not those defaults are not the issue. That said, I usually start with the User-Agent header and work my way up from there.
In this case, the site is filtering on the user agent, it looks like they are blacklisting Python, setting it to almost any other value already works:
>>> requests.get('https://rent.591.com.tw', headers={'User-Agent': 'Custom'})
<Response [200]>
Next, you need to take into account that requests is not a browser. requests is only a HTTP client, a browser does much, much more. A browser parses HTML for additional resources such as images, fonts, styling and scripts, loads those additional resources too, and executes scripts. Scripts can then alter what the browser displays and load additional resources. If your requests results don't match what you see in the browser, but the initial request the browser makes matches, then you'll need to figure out what other resources the browser has loaded and make additional requests with requests as needed. If all else fails, use a project like requests-html, which lets you run a URL through an actual, headless Chromium browser.
The site you are trying to contact makes an additional AJAX request to https://rent.591.com.tw/home/search/rsList?is_new_list=1&type=1&kind=0&searchtype=1®ion=1, take that into account if you are trying to scrape data from this site.
Next, well-built sites will use security best-practices such as CSRF tokens, which require you to make requests in the right order (e.g. a GET request to retrieve a form before a POST to the handler) and handle cookies or otherwise extract the extra information a server expects to be passed from one request to another.
Last but not least, if a site is blocking scripts from making requests, they probably are either trying to enforce terms of service that prohibit scraping, or because they have an API they rather have you use. Check for either, and take into consideration that you might be blocked more effectively if you continue to scrape the site anyway.
One thing to note: I was using requests.get() to do some webscraping off of links I was reading from a file. What I didn't realise was that the links had a newline character (\n) when I read each line from the file.
If you're getting multiple links from a file instead of a Python data type like a string, make sure to strip any \r or \n characters before you call requests.get("your link"). In my case, I used
with open("filepath", 'w') as file:
links = file.read().splitlines()
for link in links:
response = requests.get(link)
In my case this was due to fact that the website address was recently changed, and I was provided the old website address. At least this changed the status code from 404 to 500, which, I think, is progress :)
I would like to try send requests.get to this website:
requests.get('https://rent.591.com.tw')
and I always get
<Response [404]>
I knew this is a common problem and tried different way but still failed.
but all of other website is ok.
any suggestion?
Webservers are black boxes. They are permitted to return any valid HTTP response, based on your request, the time of day, the phase of the moon, or any other criteria they pick. If another HTTP client gets a different response, consistently, try to figure out what the differences are in the request that Python sends and the request the other client sends.
That means you need to:
Record all aspects of the working request
Record all aspects of the failing request
Try out what changes you can make to make the failing request more like the working request, and minimise those changes.
I usually point my requests to a http://httpbin.org endpoint, have it record the request, and then experiment.
For requests, there are several headers that are set automatically, and many of these you would not normally expect to have to change:
Host; this must be set to the hostname you are contacting, so that it can properly multi-host different sites. requests sets this one.
Content-Length and Content-Type, for POST requests, are usually set from the arguments you pass to requests. If these don't match, alter the arguments you pass in to requests (but watch out with multipart/* requests, which use a generated boundary recorded in the Content-Type header; leave generating that to requests).
Connection: leave this to the client to manage
Cookies: these are often set on an initial GET request, or after first logging into the site. Make sure you capture cookies with a requests.Session() object and that you are logged in (supplied credentials the same way the browser did).
Everything else is fair game but if requests has set a default value, then more often than not those defaults are not the issue. That said, I usually start with the User-Agent header and work my way up from there.
In this case, the site is filtering on the user agent, it looks like they are blacklisting Python, setting it to almost any other value already works:
>>> requests.get('https://rent.591.com.tw', headers={'User-Agent': 'Custom'})
<Response [200]>
Next, you need to take into account that requests is not a browser. requests is only a HTTP client, a browser does much, much more. A browser parses HTML for additional resources such as images, fonts, styling and scripts, loads those additional resources too, and executes scripts. Scripts can then alter what the browser displays and load additional resources. If your requests results don't match what you see in the browser, but the initial request the browser makes matches, then you'll need to figure out what other resources the browser has loaded and make additional requests with requests as needed. If all else fails, use a project like requests-html, which lets you run a URL through an actual, headless Chromium browser.
The site you are trying to contact makes an additional AJAX request to https://rent.591.com.tw/home/search/rsList?is_new_list=1&type=1&kind=0&searchtype=1®ion=1, take that into account if you are trying to scrape data from this site.
Next, well-built sites will use security best-practices such as CSRF tokens, which require you to make requests in the right order (e.g. a GET request to retrieve a form before a POST to the handler) and handle cookies or otherwise extract the extra information a server expects to be passed from one request to another.
Last but not least, if a site is blocking scripts from making requests, they probably are either trying to enforce terms of service that prohibit scraping, or because they have an API they rather have you use. Check for either, and take into consideration that you might be blocked more effectively if you continue to scrape the site anyway.
One thing to note: I was using requests.get() to do some webscraping off of links I was reading from a file. What I didn't realise was that the links had a newline character (\n) when I read each line from the file.
If you're getting multiple links from a file instead of a Python data type like a string, make sure to strip any \r or \n characters before you call requests.get("your link"). In my case, I used
with open("filepath", 'w') as file:
links = file.read().splitlines()
for link in links:
response = requests.get(link)
In my case this was due to fact that the website address was recently changed, and I was provided the old website address. At least this changed the status code from 404 to 500, which, I think, is progress :)
I get a http response using Python by executing the following code:
conn = httplib.HTTPSConnection('westus.api.cognitive.microsoft.com')
conn.request("GET", "/something/somethig")
response = conn.getresponse()
#data = response.read()
data =json.load(response)
print(data)
The results show a list of API results.
But they are different from the one that is executed and when I manually access the westus.api.cognitive.microsoft.com/something/something website.
Can somebody tell me what is wrong here?
There are a lot of things that are different between a request in a script and a request in a browser. For one, your script will not execute any associated JavaScript from the page. Second, the header of your http request includes details of the requesting client.
For example for a REST interface, a server may return the plainest JSON to an application request and return a formatted page for a browser request.
In Chrome, you can open the developer tools with "..."->"More Tools"->"Developer Tools", and with that open, you can open all of your requests and see the headers:
There is a similar function in Firefox for looking at headers. Click the hamburger->"Developer"->"Web Console". Under "Net" you can filter for requests. Click a request to see the details.
For POST commands, also look at the body of the request.
Finally, last week, I was trying to automate a POST command in Java, and I had some difficulty in doing so. A colleague was able to make the call with the curl command, and that gave me enough clues about the critical parameters. So I recommend trying curl which can help distinguish critical parameters from accidental ones, or at least to look at the problem from another angle.