Related
I need to install cv2 for a script that has been written for me. I tried pip install cv2 and pip install open_cv and got the same problem - a warning message from dist.py and complains about zlib being not found. No cv2 installed. I also tried pyopenvc and pip install opencv-python.
So, I went to the opencv site and downloaded the relevant exe. Ran it - generated a heap of subdirectories and a make file and stuff.
What do I do now?
Install opencv-python (which is an unofficial pre-built OpenCV package for Python) by issuing the following command:
pip install opencv-python
run the following command by creating a virtual enviroment using python 3 and run
pip3 install opencv-python
to check it has installed correctly run
python3 -c "import cv2"
In pip package management, there are 4 different OpenCV packages all using the same namespace, cv2. Although they are not officially supported by OpenCV.org, they are commonly used in developers' community. You could install any of them using the following command:
pip install PACKAGE_NAME
where PACKAGE_NAME can be
opencv-python (only contains main modules)
opencv-contrib-python (contains both main and contrib modules)
opencv-python-headless (same as opencv-python but without GUI functionality)
opencv-contrib-python-headless (same as opencv-contrib-python but without GUI functionality)
You should only install one of them depending on your needs. If you accidentally installed multiple of them in the same environment, you can remove them using pip uninstall before installing the correct one again.
For more details, you can refer to the project description of OpenCV on Wheels.
As of 2021, all of these 4 packages are official OpenCV projects. Source: OpenCV Website.
To Install the Current Latest version of OpenCV then use the below commands:
Use this Command:
pip install --upgrade opencv-python
If you're facing problem in above command then try this :
pip install --upgrade opencv-contrib-python
To check the version of installed OpenCV:
import cv2
print(cv2.__version__)
Simply use this for the so far latest version 4.1.0.
pip install opencv-contrib-python==4.1.0.25
For the default version use this:
pip install opencv-contrib-python
If you have a new Raspberry Pi and want to install OpenCV then this tutorial would be a good choice.
For Ubuntu/Linux users:
sudo apt install python3-opencv
As of 10/22/2019, I think the best answer is simply
conda install opencv
It appears opencv is now in the main Anaconda channel.
To see which packages (including opencv) are in the main Anaconda channel go to Anaconda Package Lists and follow the link corresponding to your python version and os version.
Everybody struggles initially while installing OpenCV. OpenCV requires a lot of dependencies in the backend. The best way to start with OpenCV is, install it in a virtual environment. I suggest that you use the Python Anaconda distribution and create a virtual environment using it. Then inside the virtual environment, you can install OpenCV using this command:
conda install -c conda-forge opencv
Please follow the command:
pip install opencv-python
then if you want to use:
import cv2
If it's not worked due to any update, please follow the documentation
Make a virtual enviroment using python3
virtualenv env_name --python="python3"
and run the following command
pip3 install opencv-python
to check it has installed correctly run
python3 -c "import cv2"
To install open_cv you can go to this website or do this,
pip install opencv-contrib-python --upgrade
pip install opencv-python
You can test it by:
C:\> python
>>> import cv2
>>> print(cv2.__version__)
'4.5.1' # your version may be a newer one
You can install opencv the normal way:
pip install opencv-python
If you are getting errors, you can do this:
pip install opencv-python-headless
Open anaconda command prompt and type in below command.
conda install -c conda-forge opencv
Once the 'Solving environment' is done. It will ask to download dependencies. Type 'y'.
It will install all the dependencies and then you are ready to code.
I recommend this for Python 3: Please install it this way with pip
pip3 install opencv-python
This will download and install the latest version of OpenCV.
You could try using below command-
pip install opencv-contrib-python
It will basically download the compatible version. If this command fails, you could upgrade you pip using below command-
python -m pip install –upgrade pip
If you need a pictorial guide, head over to Simple Steps to Install OpenCV in Windows
You can also try installing OpenCV from prebuilt binaries from the official OpenCV site.
->pip install opencv-python you can use this.
But if this code does not working then you can check python version on cmd and anaconda because they are different. So you type command in anaconda prompt and cmd, it will work. You can check this -> pip list
Open terminal
Run the following command
pip install --trusted-host=pypi.org --trusted-host=files.pythonhosted.org opencv-python.
Hope it will work.
Installing cv2 or opencv-python using pip is sometimes a problem. I was having the same problem of installing cv2 with pip. The installation wasn't a problem the problem was to import cv2 after installation. I was getting an Import Error so to fix this i import main from pip to install opencv-python. Try to run the following code in your python file then opencv-python will be installed
from pip._internal import main as install
try:
import cv2
except ImportError as e:
install(["install", "opencv-python"])
finally:
pass
I hope this will help someone
As a reference it might help someone... On Debian system I hard to do the following:
apt-get install -y libsm6 libxext6 libxrender-dev
pip3 install opencv-python
python3 -c "import cv2"
On Ubuntu you can install it for the system Python with
sudo apt install python3-opencv
if you are using Pycharm navigate settings > Project:name > Project interpreter just search the module by name(in this case OpenCV-python) and install it. worked for me
In case you use aarch64 platform with ARM64 cpu - and/or docker
On a development board on ARM64, no python-opencv version were found at all
version: NONE.
I've had to build from source. This allowed to include CUDA support.
In my case it was already available on the board but it wasn't found on the development environment.
If compiling from source is out of reach, there are Dockers
Of course compiling will take some time (few hours on ARM core), but it is worthy process to know as most open source tools can be built this way in case of issues.
I've had this problem in Google Colab, It only worked with this specific package version.
!pip install "opencv-python-headless<4.3"
There are two options-
pip install cv2
or
pip install opencv-python
Hope it helps.
I'm trying to install some packages with pip.
But pip install unroll gives me
Command "python setup.py egg_info" failed with error code 1 in
C:\Users\MARKAN~1\AppData\Local\Temp\pip-build-wa7uco0k\unroll\
How can I solve this?
About the error code
According to the Python documentation:
This module makes available standard errno system symbols. The value of each symbol is the corresponding integer value. The names and descriptions are borrowed from linux/include/errno.h, which should be pretty all-inclusive.
Error code 1 is defined in errno.h and means Operation not permitted.
About your error
Your setuptools do not appear to be installed. Just follow the Installation Instructions from the PyPI website.
If it's already installed, try
pip install --upgrade setuptools
If it's already up to date, check that the module ez_setup is not missing. If it is, then
pip install ez_setup
Then try again
pip install unroll
If it's still not working, maybe pip didn't install/upgrade setup_tools properly so you might want to try
easy_install -U setuptools
And again
pip install unroll
Here's a little guide explaining a little bit how I usually install new packages on Python + Windows. It seems you're using Windows paths, so this answer will stick to that particular SO:
I never use a system-wide Python installation. I only use virtualenvs, and usually I try to have the latest version of 2.x & 3.x.
My first attempt is always doing pip install package_i_want in some of my Visual Studio command prompts. What Visual Studio command prompt? Well, ideally the Visual Studio which matches the one which was used to build Python. For instance, let's say your Python installation says Python 2.7.11 (v2.7.11:6d1b6a68f775, Dec 5 2015, 20:40:30) [MSC v.1500 64 bit (AMD64)] on win32. The version of Visual Studio used to compile Python can be found here, so v1500 means I'd be using vs2008 x64 command prompt
If the previous step failed for some reason I just try using easy_install package_i_want
If the previous step failed for some reason I go to gohlke website and I check whether my package is available over there. If it's so, I'm lucky, I just download it into my virtualenv and then I just go to that location using a command prompt and I do pip install package_i_want.whl
If the previous step didn't succeed I'll just try to build the wheel myself and once it's generated I'll try to install it with pip install package_i_want.whl
Now, if we focus in your specific problem, where you're having a hard time installing the unroll package. It seems the fastest way to install it is doing something like this:
git clone https://github.com/Zulko/unroll
cd unroll && python setup.py bdist_wheel
Copy the generated unroll-0.1.0-py2-none-any.whl file from the created dist folder into your virtualenv.
pip install unroll-0.1.0-py2-none-any.whl
That way it will install without any problems. To check it really works, just login into the Python installation and try import unroll, it shouldn't complain.
One last note: This method works almost 99% of the time, and sometimes you'll find some pip packages which are specific to Unix or Mac OS X, in that case, when that happens I'm afraid the best way to get a Windows version is either posting some issues to the main developers or having some fun by yourself porting to Windows (typically a few hours if you're not lucky) :)
It was resolved after upgrading pip:
python -m pip install --upgrade pip
pip install "package-name"
I got stuck exactly with the same error with psycopg2. It looks like I skipped a few steps while installing Python and related packages.
sudo apt-get install python-dev libpq-dev
Go to your virtual env
pip install psycopg2
(In your case you need to replace psycopg2 with the package you have an issue with.)
It worked seamlessly.
I got this same error while installing mitmproxy using pip3. The below command fixed this:
pip3 install --upgrade setuptools
Download and install the Microsoft Visual C++ Compiler for Python 2.7 from https://www.microsoft.com/en-in/download/details.aspx?id=44266 - this package contains the compiler and set of system headers necessary for producing binary wheels for Python 2.7 packages.
Open a command prompt in elevated mode (run as administrator)
Firstly do pip install ez_setup
Then do pip install unroll (It will start installing numpy, music21, decorator, imageio, tqdm, moviepy, unroll) # Please be patient for music21 installation
Python 2.7.11 64 bit used
Other way:
sudo apt-get install python-psycopg2 python-mysqldb
I had the same issue when installing the "Twisted" library and solved it by running the following command on Ubuntu 16.04 (Xenial Xerus):
sudo apt-get install python-setuptools python-dev build-essential
It's a dependency issue.
I tried running the following commands helped me sorting out the dependencies, in my case the dependency was
grpcio
pip3 install --upgrade pip
python3 -m pip install --upgrade setuptools
pip3 install --no-cache-dir --force-reinstall -Iv grpcio==1.36.1
pip3 install pulsar-client==2.7.0
remember you must have python3 installed in your system.
First try:
pip install unroll
For sure not work :)
Then Try:
pip2 install unroll
Still get error Try:
pip3 install unroll
If pip3 Worked then suggest to change configuration to use pip3 as pip because you will get a lot of issues as the modern now is Python3 = pip3 if you execute a script files.
I had the same problem.
The problem was:
pyparsing 2.2 was already installed and my requirements.txt was trying to install pyparsing 2.0.1 which throw this error
Context: I was using virtualenv, and it seems the 2.2 came from my global OS Python site-packages, but even with --no-site-packages flag (now by default in last virtualenv) the 2.2 was still present. Surely because I installed Python from their website and it added Python libraries to my $PATH.
Maybe a pip install --ignore-installed would have worked.
Solution: as I needed to move forwards, I just removed the pyparsing==2.0.1 from my requirements.txt.
I ran into the same error code when trying to install a Python module with pip.
#Hackndo noted that the documentation indicate a security issue.
Based on that answer, my problem was solved by running the pip install command with sudo prefixed:
sudo pip install python-mpd2
For me this worked
python3 -m pip3 install -U pip
you can also try
python -m pip install -U pip
pip3 install --upgrade setuptools
WARNING: pip is being invoked by an old script wrapper. This will fail in a future version of pip.
Please see https://github.com/pypa/pip/issues/5599 for advice on fixing the underlying issue.
To avoid this problem you can invoke Python with -m pip instead of running pip directly.
Use python3 -m pip "command", eg:
python3 -m pip install --user pyqt5
I tried all of the above with no success. I then updated my Python version from 2.7.10 to 2.7.13, and it resolved the problems that I was experiencing.
That means some packages in pip are old or not correctly installed.
Try checking version and then upgrading pip.Use auto remove if that works.
If the pip command shows an error all the time for any command or it freezes, etc.
The best solution is to uninstall it or remove it completely.
Install a fresh pip and then update and upgrade your system.
I have given a solution to installing pip fresh here - python: can't open file get-pip.py error 2] no such file or directory
next installation helps me:
pip3 install cython
This worked for me:
sudo xcodebuild -license
Upgrading Python to version 3 fixed my problem. Nothing else did.
I downloaded the .whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/ and then did:
pip install scipy-0.19.1-cp27-cp27m-win32.whl
Note that the version you need to use (win32/win_amd-64) depends on the version of Python and not that of Windows.
I had this problem using virtualenvs (with pipenv) on my new development setup.
I could only solve it by upgrading the psycopg2 version from 2.6.2 to 2.7.3.
More information is at https://github.com/psycopg/psycopg2/issues/594
I faced the same problem with the same error message but on Ubuntu 16.04 LTS (Xenial Xerus) instead:
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-w71uo1rg/poster/
I tested all the solutions provided above and none of them worked for me. I read the full TraceBack and found out I had to create the virtual environment with Python version 2.7 instead (the default one uses Python 3.5 instead):
virtualenv --python=/usr/bin/python2.7 my_venv
Once I activated it, I run pip install unirest successfully.
try on linux:
sudo apt install python-pip python-bluez libbluetooth-dev libboost-python-dev libboost-thread-dev libglib2.0-dev bluez bluez-hcidump
Had the same problem on my Win10 PC with different packages and tried everything mentioned so far.
Finally solved it by disabling Comodo Auto-Containment.
Since nobody has mentioned it yet, I hope it helps someone.
I had the same problem and was able to fix by doing the following.
Windows Python needs Visual C++ libraries installed via the SDK to build code, such as via setuptools.extension.Extension or numpy.distutils.core.Extension. For example, building f2py modules in Windows with Python requires Visual C++ SDK as installed above. On Linux and Mac, the C++ libraries are installed with the compiler.
https://www.scivision.co/python-windows-visual-c++-14-required/
Following below command worked for me
[root#sandbox ~]# pip install google-api-python-client==1.6.4
Methods to solve setup.pu egg_info issue when updating setuptools or not other methods doesnot works.
If CONDA version of the library is available to install use conda instead of pip.
Clone the library repo and then try installation by pip install -e . or by python setup.py install
upgrading python's version did the work for me.
I have just encountered the same problem when trying to pip install -e . a new repo. I did not notice that the contents of setup.py haven't been saved properly and I was effectively running the command with an empty setup.py.
Hence you may experience the same error message if the setup.py of the target package is either empty or malformed.
I solved it on Centos 7 by using:
sudo yum install libcurl-devel
I am trying to run Google's deep dream. For some odd reason I keep getting
ImportError: No module named google.protobuf
after trying to import protobuf. I have installed protobuf using sudo install protobuf. I am running python 2.7 OSX Yosemite 10.10.3.
I think it may be a deployment location issue but i cant find anything on the web about it. Currently deploying to /usr/local/lib/python2.7/site-packages.
There is another possibility, if you are running a python 2.7.11 or other similar versions,
sudo pip install protobuf
is ok.
But if you are in a anaconda environment, you should use
conda install protobuf
Locating the google directory in the site-packages directory (for the proper latter directory, of course) and manually creating an (empty) __init__.py resolved this issue for me.
(Note that within this directory is the protobuf directory but my installation of Python 2.7 did not accept the new-style packages so the __init__.py was required, even if empty, to identify the folder as a package folder.)
...In case this helps anyone in the future.
In my case I
downloaded the source code, compiled and installed:
$ ./configure
$ make
$ make check
$ sudo make install`
for python I located its folder(python) under source code, and ran commands:
$ python setup.py build
$ python setup.py install'
Not sure if this could help you..
I got the same error message when I tried to use Tensor Flow. The solution was simply to uninstall Tensor Flow and protobuf:
$ sudo pip uninstall protobuf
$ sudo pip uninstall tensorflow
And reinstall it again: pip installation of Tensorflow. Currently, this is:
# Ubuntu/Linux 64-bit, CPU only:
$ sudo pip install --upgrade https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-0.8.0rc0-cp27-none-linux_x86_64.whl
# Ubuntu/Linux 64-bit, GPU enabled:
$ sudo pip install --upgrade https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow-0.8.0rc0-cp27-none-linux_x86_64.whl
# Mac OS X, CPU only:
$ sudo easy_install --upgrade six
$ sudo pip install --upgrade https://storage.googleapis.com/tensorflow/mac/tensorflow-0.8.0rc0-py2-none-any.whl
when I command pip install protobuf, I get the error:
Cannot uninstall 'six'. It is a distutils installed project and thus we cannot accurately determine which files belong to it which would lead to only a partial uninstall.
If you have the same problem as me, you should do the following commands.
pip install --ignore-installed six
sudo pip install protobuf
According to your comments, you have multiply versions of python
what could happend is that you install the package with pip of anthor python
pip is actually link to script that donwload and install your package.
two possible solutions:
go to $(PYTHONPATH)/Scripts and run pip from that folder that way you insure
you use the correct pip
create alias to pip which points to $(PYTHONPATH)/Scripts/pip and then run pip install
how will you know it worked?
Simple if the new pip is used the package will be install successfully, otherwise the package is already installed
I installed the protobuf with this command:
conda install -c anaconda protobuf=2.6.1
(you should check the version of protobuf)
In my case, MacOS has the permission control.
sudo -H pip3 install protobuf
I had this problem to when I had a google.py file in my project files.
It is quite easy to reproduce.
main.py: import tensorflow as tf
google.py: print("Protobuf error due to google.py")
Not sure if this is a bug and where to report it.
I'm trying to install mpi4py using pip install mpi4py, but I'm getting the following error:
error: Cannot find 'mpi.h' header. Check your configuration!!!
Earlier in the same error report I have,
clang: error: linker command failed with exit code 1 (use -v to see invocation)
What might the problem be?
Thanks!
As the error says, there are libraries missing. I solved it by installing libopenmpi-dev package
sudo apt-get install libopenmpi-dev
and then installed the mpi4py using pip
pip install mpi4py
I met with the similar problem and fixed this by firstly
brew install mpich
And then
pip install mpi4py
you can do this:
brew install mpich
then
sudo find / -name mpicc
finally
env MPICC=/yourpath/mpicc pip3 install mpi4py
None of the above solutions worked for me. I just use the conda install:
brew install mpich
conda install mpi4py
If mpi4py cannot find mpi.h, then likely the problem is how you are pointing mpi4py to your existing mpi library.
$ python setup.py build --mpicc=/where/you/have/mpicc
Now, there there are a few special cases related to OS X. You should consult http://mpi4py.scipy.org/docs/usrman/install.html to see if any apply to you.
in my case, all solutions above is failed but succeded by conda
conda install -c conda-forge mpi4py mpich
If somebody stumbles by and has the same problem I had:
I wanted to install mpi4py using pip as root:
sudo pip install mpi4py
I got the error message that mpi.h was missing during the installation. The path was set correctly, but only for my user, not for root. So if you run into trouble with missing libraries/headers during any installation, make sure the correct environment is also set up for root.
As I use mpi-selector to select which mpi implementation you use, I just had to run mpi-selector as root to set up everything correctly, and the installation succeeded.
I have the similar issue, the following helps me as well.
sudo apt install libopenmpi-dev
first post here and new to python , sorry if im off topic.
i finally installed mpi4py
1) by downloading the right version from here https://www.lfd.uci.edu/~gohlke/pythonlibs/#mpi4py
2) open cmd ,change directory to where the downloaded file is
3) pip install some-package.whl ( How do I install a Python package with a .whl file? )
I'm deploying a Django app to a dev server and am hitting this error when I run pip install -r requirements.txt:
Traceback (most recent call last):
File "/var/www/mydir/virtualenvs/dev/bin/pip", line 5, in <module>
from pkg_resources import load_entry_point
ImportError: No module named pkg_resources
pkg_resources appears to be distributed with setuptools. Initially I thought this might not be installed to the Python in the virtualenv, so I installed setuptools 2.6 (same version as Python) to the Python site-packages in the virtualenv with the following command:
sh setuptools-0.6c11-py2.6.egg --install-dir /var/www/mydir/virtualenvs/dev/lib/python2.6/site-packages
EDIT: This only happens inside the virtualenv. If I open a console outside the virtualenv then pkg_resources is present, but I am still getting the same error.
Any ideas as to why pkg_resources is not on the path?
July 2018 Update
Most people should now use pip install setuptools (possibly with sudo).
Some may need to (re)install the python-setuptools package via their package manager (apt-get install, yum install, etc.).
This issue can be highly dependent on your OS and dev environment. See the legacy/other answers below if the above isn't working for you.
Explanation
This error message is caused by a missing/broken Python setuptools package. Per Matt M.'s comment and setuptools issue #581, the bootstrap script referred to below is no longer the recommended installation method.
The bootstrap script instructions will remain below, in case it's still helpful to anyone.
Legacy Answer
I encountered the same ImportError today while trying to use pip. Somehow the setuptools package had been deleted in my Python environment.
To fix the issue, run the setup script for setuptools:
wget https://bootstrap.pypa.io/ez_setup.py -O - | python
(or if you don't have wget installed (e.g. OS X), try
curl https://bootstrap.pypa.io/ez_setup.py | python
possibly with sudo prepended.)
If you have any version of distribute, or any setuptools below 0.6, you will have to uninstall it first.*
See Installation Instructions for further details.
* If you already have a working distribute, upgrading it to the "compatibility wrapper" that switches you over to setuptools is easier. But if things are already broken, don't try that.
sudo apt-get install --reinstall python-pkg-resources
fixed it for me in Debian. Seems like uninstalling some .deb packages (twisted set in my case) has broken the path python uses to find packages
I have seen this error while trying to install rhodecode to a virtualenv on ubuntu 13.10. For me the solution was to run
pip install --upgrade setuptools
pip install --upgrade distribute
before I run easy_install rhodecode.
It also happened to me. I think the problem will happen if the requirements.txt contains a "distribute" entry while the virtualenv uses setuptools. Pip will try to patch setuptools to make room for distribute, but unfortunately it will fail half way.
The easy solution is delete your current virtualenv then make a new virtualenv with --distribute argument.
An example if using virtualenvwrapper:
$ deactivate
$ rmvirtualenv yourenv
$ mkvirtualenv yourenv --distribute
$ workon yourenv
$ pip install -r requirements.txt
In CentOS 6 installing the package python-setuptools fixed it.
yum install python-setuptools
After trying several of these answers, then reaching out to a colleague, what worked for me on Ubuntu 16.04 was:
pip install --force-reinstall -U setuptools
pip install --force-reinstall -U pip
In my case, it was only an old version of pillow 3.1.1 that was having trouble (pillow 4.x worked fine), and that's now resolved!
I had this error earlier and the highest rated answer gave me an error trying to download the ez_setup.py file. I found another source so you can run the command:
curl http://peak.telecommunity.com/dist/ez_setup.py | python
I found that I also had to use sudo to get it working, so you may need to run:
sudo curl http://peak.telecommunity.com/dist/ez_setup.py | sudo python
I've also created another location that the script can be downloaded from:
https://gist.github.com/ajtrichards/42e73562a89edb1039f3
Needed a little bit more sudo. Then used easy_install to install pip. Works.
sudo wget https://bootstrap.pypa.io/ez_setup.py -O - | sudo python
sudo easy_install pip
I fixed the error with virtualenv by doing this:
Copied pkg_resources.py from
/Library/Python/2.7/site-packages/setuptools
to
/Library/Python/2.7/site-packages/
This may be a cheap workaround, but it worked for me.
.
If setup tools doesn't exist, you can try installing system-site-packages by typing virtualenv --system-site-packages /DESTINATION DIRECTORY, changing the last part to be the directory you want to install to. pkg_rousources.py will be under that directory in lib/python2.7/site-packages
the simple resoluition is that you can use conda to upgrade setuptools or entire enviroment. (Specially for windows user.)
conda upgrade -c anaconda setuptools
if the setuptools is removed, you need to install setuptools again.
conda install -c anaconda setuptools
if these all methodes doesn't work, you can upgrade conda environement. But I do not recommend that you need to reinstall and uninstall some packages because after that it will exacerbate the situation.
A lot of answers are recommending the following but if you read through the source of that script, you'll realise it's deprecated.
wget https://bootstrap.pypa.io/ez_setup.py -O - | python
If your pip is also broken, this won't work either.
pip install setuptools
I found I had to run the command from Ensure pip, setuptools, and wheel are up to date, to get pip working again.
python -m pip install --upgrade pip setuptools wheel
You can use the command
sudo apt-get install --reinstall python3-pkg-resources
if you are using python3 , this was the case with me.
I ran into this problem after installing the latest Python version 3.10.4.
Somehow, the setuptools package and pip were deleted.
I used the following command to resolve the issue :
in [Windows]
py -m ensurepip --default-pip
For me, this error was being caused because I had a subdirectory called "site"! I don't know if this is a pip bug or not, but I started with:
/some/dir/requirements.txt
/some/dir/site/
pip install -r requirements.txt wouldn't work, giving me the above error!
renaming the subfolder from "site" to "src" fixed the problem! Maybe pip is looking for "site-packages"? Crazy.
For me, it turned out to be a permissions problem on site-packages. Since it's only my dev environment, I raised the permissions and everything is working again:
sudo chmod -R a+rwx /path/to/my/venv/lib/python2.7/site-packages/
I had this problem when I had activated my virtualenv as a different user than the one who created it. It seems to be a permission problem. I discovered this when I tried the answer by #cwc and saw this in the output:
Installing easy_install script to /path/env/bin
error: /path/env/bin/easy_install: Permission denied
Switching back to the user that created the virtualenv, then running the original pip install command went without problems. Hope this helps!
I had this problem today as well. I only got the problem inside the virtual env.
The solution for me was deactivating the virtual env, deleting and then uninstalling virtualenv with pip and reinstalling it. After that I created a new virtual env for my project, then pip worked fine both inside the virtual environment as in the normal environment.
Looks like they have moved away from bitbucket and are now on github (https://github.com/pypa/setuptools)
Command to run is:
wget https://bootstrap.pypa.io/ez_setup.py -O - | sudo python
If you are encountering this issue with an application installed via conda, the solution (as stated in this bug report) is simply to install setup-tools with:
conda install setuptools
On Windows, with python 3.7, this worked for me:
pip install --upgrade setuptools --user
--user installs packages in your home directory, which doesn't require admin privileges.
Apparently you're missing setuptools. Some virtualenv versions use distribute instead of setuptools by default. Use the --setuptools option when creating the virtualenv or set the VIRTUALENV_SETUPTOOLS=1 in your environment.
None of the posted answers worked for me, so I reinstalled pip and it worked!
sudo apt-get install python-setuptools python-dev build-essential
sudo easy_install pip
pip install --upgrade setuptools
(reference: http://www.saltycrane.com/blog/2010/02/how-install-pip-ubuntu/)
In my case, I had 2 python versions installed initially and later I had deleted the older one. So while creating the virtual environment
virtualenv venv
was referring to the uninstalled python
What worked for me
python3 -m virtualenv venv
Same is true when you are trying to use pip.
I came across this answer when I was trying to follow this guide for OSX. What worked for me was, after running python get-pip, I had to ALSO easy_install pip. That fixed the issue of not being able to run pip at all. I did have a bunch of old macport stuff installed. That may have conflicted.
On windows, I installed pip downloaded from www.lfd.uci.edu/~gohlke/pythonlibs/ then encontered this problem.
So I should have installed setuptools(easy_install) first.
just reinstall your setuptools by :
$ sudo wget https://pypi.python.org/packages/source/s/setuptools/setuptools-0.6c11.tar.gz#md5=7df2a529a074f613b509fb44feefefe74e
$ tar -zxvf setuptools-0.6c11.tar.gz
$ cd setuptools-0.6c11/
$ sudo python setup.py build
$ sudo python setup.py install
$ sudo pip install --upgrade setuptools
then everything will be fine.
I use CentOS 6.7, and my python was just upgrade from 2.6.6 to 2.7.11, after tried so many different answer, finally the following one does the job:
sudo yum install python-devel
Hope help someone in the same situation.
I ran into this problem after updating my Ubuntu build. It seems to have gone through and removed set up tools in all of my virtual environments.
To remedy this I reinstalled the virtual environment back into the target directory. This cleaned up missing setup tools and got things running again.
e.g.:
~/RepoDir/TestProject$ virtualenv TestEnvironmentDir
For me a good fix was to use --no-download option to virtualenv (VIRTUALENV_NO_DOWNLOAD=1 tox for tox.)
On Opensuse 42.1 the following fixed this issue:
zypper in python-Pygments