Related
I have a file called list.txt:
['d1','d2','d3']
I want to loop through all the items in the list. Here is the code:
deviceList = open("list.txt", "r")
deviceList = deviceList.read()
for i in deviceList:
print(i)
Here the issue is that, when I run the code, it will split all the characters:
% python3 run.py
[
'
d
1
'
,
'
d
2
'
,
'
d
3
'
]
It's like all the items have been considered as 1 string? I think needs to be parsed? Please let me know what am I missing..
Simply because you do not have a list, you are reading a pure text...
I suggest writing the list without the [] so you can use the split() function.
Write the file like this: d1;d2;d3
and use this script to obtain a list
f = open("filename", 'r')
line = f.readlines()
f.close()
list = line.split(";")
if you need the [] in the file, simply add a strip() function like this
f = open("filename", 'r')
line = f.readlines()
f.close()
strip = line.strip("[]")
list = strip.split(";")
should work the same
This isn't the cleanest solution, but it will do if your .txt file is always just in the "[x,y,z]" format.
deviceList = open("list.txt", "r")
deviceList = deviceList[1:-1]
deviceList = deviceList.split(",")
for i in deviceList:
print(i)
This takes your string, strips the "[" and "]", and then separates the entire string between the commas and turns that into a list. As other users have suggested, there are probably better ways to store this list than a text file as it is, but this solution will do exactly what you are asking. Hope this helps!
I am currently completely new to python and trying to build a simple hangman game. I created a .txt file with all the sample words and imported it to python. When printing them out however they all have this format: ['exampleword\n'], ['exampleword2\n'] I however want to get rid of the \n ending. I tried most of the suggestions from this thread: How to remove '\n' from end of strings inside a list?, but they didn't work.
woerter = open("woerter.txt", "r")
wortliste = [line.split("\t") for line in woerter.readlines()]
print(wortliste)
I have python 3.8.2. installed, any help is greatly appreciated :)
try:
woerter = open("woerter.txt", "r")
wortliste = [line.rstrip() for line in woerter.readlines()]
print(wortliste)
no reason to use readlines, you can just iterate over the file directly:
with open('woerter.txt') as f:
wortlist = [l.strip() for l in f]
You can use str.splitlines().
for example:
string = "this\n"
string += "has\n"
string += "multiple\n"
string += "lines"
words = string.splitlines()
print(words)
# Outputs: ['this', 'has', 'multiple', 'lines']
with open("woerter.txt", 'r') as f:
wordlist = f.read().splitlines()
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
I have a text file that looks like:
ABC
DEF
How can I read the file into a single-line string without newlines, in this case creating a string 'ABCDEF'?
For reading the file into a list of lines, but removing the trailing newline character from each line, see How to read a file without newlines?.
You could use:
with open('data.txt', 'r') as file:
data = file.read().replace('\n', '')
Or if the file content is guaranteed to be one-line
with open('data.txt', 'r') as file:
data = file.read().rstrip()
In Python 3.5 or later, using pathlib you can copy text file contents into a variable and close the file in one line:
from pathlib import Path
txt = Path('data.txt').read_text()
and then you can use str.replace to remove the newlines:
txt = txt.replace('\n', '')
You can read from a file in one line:
str = open('very_Important.txt', 'r').read()
Please note that this does not close the file explicitly.
CPython will close the file when it exits as part of the garbage collection.
But other python implementations won't. To write portable code, it is better to use with or close the file explicitly. Short is not always better. See https://stackoverflow.com/a/7396043/362951
To join all lines into a string and remove new lines, I normally use :
with open('t.txt') as f:
s = " ".join([l.rstrip("\n") for l in f])
with open("data.txt") as myfile:
data="".join(line.rstrip() for line in myfile)
join() will join a list of strings, and rstrip() with no arguments will trim whitespace, including newlines, from the end of strings.
This can be done using the read() method :
text_as_string = open('Your_Text_File.txt', 'r').read()
Or as the default mode itself is 'r' (read) so simply use,
text_as_string = open('Your_Text_File.txt').read()
I'm surprised nobody mentioned splitlines() yet.
with open ("data.txt", "r") as myfile:
data = myfile.read().splitlines()
Variable data is now a list that looks like this when printed:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
Note there are no newlines (\n).
At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:
for line in data:
print(line)
It's hard to tell exactly what you're after, but something like this should get you started:
with open ("data.txt", "r") as myfile:
data = ' '.join([line.replace('\n', '') for line in myfile.readlines()])
I have fiddled around with this for a while and have prefer to use use read in combination with rstrip. Without rstrip("\n"), Python adds a newline to the end of the string, which in most cases is not very useful.
with open("myfile.txt") as f:
file_content = f.read().rstrip("\n")
print(file_content)
Here are four codes for you to choose one:
with open("my_text_file.txt", "r") as file:
data = file.read().replace("\n", "")
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().split("\n"))
or
with open("my_text_file.txt", "r") as file:
data = "".join(file.read().splitlines())
or
with open("my_text_file.txt", "r") as file:
data = "".join([line for line in file])
you can compress this into one into two lines of code!!!
content = open('filepath','r').read().replace('\n',' ')
print(content)
if your file reads:
hello how are you?
who are you?
blank blank
python output
hello how are you? who are you? blank blank
You can also strip each line and concatenate into a final string.
myfile = open("data.txt","r")
data = ""
lines = myfile.readlines()
for line in lines:
data = data + line.strip();
This would also work out just fine.
This is a one line, copy-pasteable solution that also closes the file object:
_ = open('data.txt', 'r'); data = _.read(); _.close()
f = open('data.txt','r')
string = ""
while 1:
line = f.readline()
if not line:break
string += line
f.close()
print(string)
python3: Google "list comprehension" if the square bracket syntax is new to you.
with open('data.txt') as f:
lines = [ line.strip('\n') for line in list(f) ]
Oneliner:
List: "".join([line.rstrip('\n') for line in open('file.txt')])
Generator: "".join((line.rstrip('\n') for line in open('file.txt')))
List is faster than generator but heavier on memory. Generators are slower than lists and is lighter for memory like iterating over lines. In case of "".join(), I think both should work well. .join() function should be removed to get list or generator respectively.
Note: close() / closing of file descriptor probably not needed
Have you tried this?
x = "yourfilename.txt"
y = open(x, 'r').read()
print(y)
To remove line breaks using Python you can use replace function of a string.
This example removes all 3 types of line breaks:
my_string = open('lala.json').read()
print(my_string)
my_string = my_string.replace("\r","").replace("\n","")
print(my_string)
Example file is:
{
"lala": "lulu",
"foo": "bar"
}
You can try it using this replay scenario:
https://repl.it/repls/AnnualJointHardware
I don't feel that anyone addressed the [ ] part of your question. When you read each line into your variable, because there were multiple lines before you replaced the \n with '' you ended up creating a list. If you have a variable of x and print it out just by
x
or print(x)
or str(x)
You will see the entire list with the brackets. If you call each element of the (array of sorts)
x[0]
then it omits the brackets. If you use the str() function you will see just the data and not the '' either.
str(x[0])
Maybe you could try this? I use this in my programs.
Data= open ('data.txt', 'r')
data = Data.readlines()
for i in range(len(data)):
data[i] = data[i].strip()+ ' '
data = ''.join(data).strip()
Regular expression works too:
import re
with open("depression.txt") as f:
l = re.split(' ', re.sub('\n',' ', f.read()))[:-1]
print (l)
['I', 'feel', 'empty', 'and', 'dead', 'inside']
with open('data.txt', 'r') as file:
data = [line.strip('\n') for line in file.readlines()]
data = ''.join(data)
from pathlib import Path
line_lst = Path("to/the/file.txt").read_text().splitlines()
Is the best way to get all the lines of a file, the '\n' are already stripped by the splitlines() (which smartly recognize win/mac/unix lines types).
But if nonetheless you want to strip each lines:
line_lst = [line.strip() for line in txt = Path("to/the/file.txt").read_text().splitlines()]
strip() was just a useful exemple, but you can process your line as you please.
At the end, you just want concatenated text ?
txt = ''.join(Path("to/the/file.txt").read_text().splitlines())
This works:
Change your file to:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
Then:
file = open("file.txt")
line = file.read()
words = line.split()
This creates a list named words that equals:
['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']
That got rid of the "\n". To answer the part about the brackets getting in your way, just do this:
for word in words: # Assuming words is the list above
print word # Prints each word in file on a different line
Or:
print words[0] + ",", words[1] # Note that the "+" symbol indicates no spaces
#The comma not in parentheses indicates a space
This returns:
LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN, GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE
with open(player_name, 'r') as myfile:
data=myfile.readline()
list=data.split(" ")
word=list[0]
This code will help you to read the first line and then using the list and split option you can convert the first line word separated by space to be stored in a list.
Than you can easily access any word, or even store it in a string.
You can also do the same thing with using a for loop.
file = open("myfile.txt", "r")
lines = file.readlines()
str = '' #string declaration
for i in range(len(lines)):
str += lines[i].rstrip('\n') + ' '
print str
Try the following:
with open('data.txt', 'r') as myfile:
data = myfile.read()
sentences = data.split('\\n')
for sentence in sentences:
print(sentence)
Caution: It does not remove the \n. It is just for viewing the text as if there were no \n
I'm trying for some time to iterate over a list of strings and remove the first word of the string, by appending the remaining of the string to another list, here's what I wrote:
from sys import argv
my_file = argv[1]
output_list = []
count = 1
with open(my_file) as input_file:
for line in input_file.readlines():
while count < len(line.split(' '):
ouput_list.append(line.split(' ')[count])
count += 1
count = 0
with open('out_file.txt', 'w') as output_file:
for line in output_list:
output_file.write(line)
Everything seems in place, but I'm getting a syntax error... What Am I missing ?
Thanks in advance!
There are two syntax errors. First, there's a missing right parenthesis in this line:
while count < len(line.split(' '):
Second, you misspelled output_list in this line:
ouput_list.append(line.split(' ')[count])
Beyond that, your code seems to be logically flawed because it removes all the whitespace between the words.
If your goal is to remove the very first word of the file and the whitespace surrounding it, while leaving everything else intact, these two lines should do the trick:
text = open(my_file).read()
text = re.sub('^\s*\w+\s*', '', text)
It can also be written in one line, but I prefer two lines for clarity.
You'll need the re module, so your complete program would look like this:
import sys, re
my_file = sys.argv[1]
text = open(my_file).read()
text = re.sub('^\s*\w+\s*', '', text)
with open('out_file.txt', 'w') as output_file:
output_file.write(text)
If you use this input file:
ant bear cat
dog elephant
You will get this output:
bear cat
dog elephant
I presume that's what you wanted.
This is working code :-
from sys import argv
my_file = argv[1]
output_list = []
count = 1
with open(my_file) as input_file:
for line in input_file.readlines():
while count < len(line.split()):
output_list.append(line.split()[count])
count += 1
count = 0
with open('out_file.txt', 'w') as output_file:
for line in output_list:
output_file.write(line+'\n') # should write in new line